| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * TQ-Systems TQMx86 PLD GPIO driver |
| * |
| * Based on vendor driver by: |
| * Vadim V.Vlasov <vvlasov@dev.rtsoft.ru> |
| */ |
| |
| #include <linux/bitmap.h> |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| |
| #define TQMX86_NGPIO 8 |
| #define TQMX86_NGPO 4 /* 0-3 - output */ |
| #define TQMX86_NGPI 4 /* 4-7 - input */ |
| #define TQMX86_DIR_INPUT_MASK 0xf0 /* 0-3 - output, 4-7 - input */ |
| |
| #define TQMX86_GPIODD 0 /* GPIO Data Direction Register */ |
| #define TQMX86_GPIOD 1 /* GPIO Data Register */ |
| #define TQMX86_GPIIC 3 /* GPI Interrupt Configuration Register */ |
| #define TQMX86_GPIIS 4 /* GPI Interrupt Status Register */ |
| |
| /* |
| * NONE, FALLING and RISING use the same bit patterns that can be programmed to |
| * the GPII register (after passing them to the TQMX86_GPII_ macros to shift |
| * them to the right position) |
| */ |
| #define TQMX86_INT_TRIG_NONE 0 |
| #define TQMX86_INT_TRIG_FALLING BIT(0) |
| #define TQMX86_INT_TRIG_RISING BIT(1) |
| #define TQMX86_INT_TRIG_BOTH (BIT(0) | BIT(1)) |
| #define TQMX86_INT_TRIG_MASK (BIT(0) | BIT(1)) |
| /* Stored in irq_type with GPII bits */ |
| #define TQMX86_INT_UNMASKED BIT(2) |
| |
| #define TQMX86_GPIIC_CONFIG(i, v) ((v) << (2 * (i))) |
| #define TQMX86_GPIIC_MASK(i) TQMX86_GPIIC_CONFIG(i, TQMX86_INT_TRIG_MASK) |
| |
| struct tqmx86_gpio_data { |
| struct gpio_chip chip; |
| void __iomem *io_base; |
| int irq; |
| /* Lock must be held for accessing output and irq_type fields */ |
| raw_spinlock_t spinlock; |
| DECLARE_BITMAP(output, TQMX86_NGPIO); |
| u8 irq_type[TQMX86_NGPIO]; |
| }; |
| |
| static u8 tqmx86_gpio_read(struct tqmx86_gpio_data *gd, unsigned int reg) |
| { |
| return ioread8(gd->io_base + reg); |
| } |
| |
| static void tqmx86_gpio_write(struct tqmx86_gpio_data *gd, u8 val, |
| unsigned int reg) |
| { |
| iowrite8(val, gd->io_base + reg); |
| } |
| |
| static void tqmx86_gpio_clrsetbits(struct tqmx86_gpio_data *gpio, |
| u8 clr, u8 set, unsigned int reg) |
| __must_hold(&gpio->spinlock) |
| { |
| u8 val = tqmx86_gpio_read(gpio, reg); |
| |
| val &= ~clr; |
| val |= set; |
| |
| tqmx86_gpio_write(gpio, val, reg); |
| } |
| |
| static int tqmx86_gpio_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); |
| |
| return !!(tqmx86_gpio_read(gpio, TQMX86_GPIOD) & BIT(offset)); |
| } |
| |
| static void _tqmx86_gpio_set(struct tqmx86_gpio_data *gpio, unsigned int offset, |
| int value) |
| __must_hold(&gpio->spinlock) |
| { |
| __assign_bit(offset, gpio->output, value); |
| tqmx86_gpio_write(gpio, bitmap_get_value8(gpio->output, 0), TQMX86_GPIOD); |
| } |
| |
| static void tqmx86_gpio_set(struct gpio_chip *chip, unsigned int offset, |
| int value) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); |
| |
| guard(raw_spinlock_irqsave)(&gpio->spinlock); |
| |
| _tqmx86_gpio_set(gpio, offset, value); |
| } |
| |
| static int tqmx86_gpio_direction_input(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); |
| |
| guard(raw_spinlock_irqsave)(&gpio->spinlock); |
| |
| tqmx86_gpio_clrsetbits(gpio, BIT(offset), 0, TQMX86_GPIODD); |
| |
| return 0; |
| } |
| |
| static int tqmx86_gpio_direction_output(struct gpio_chip *chip, |
| unsigned int offset, |
| int value) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); |
| |
| guard(raw_spinlock_irqsave)(&gpio->spinlock); |
| |
| _tqmx86_gpio_set(gpio, offset, value); |
| tqmx86_gpio_clrsetbits(gpio, 0, BIT(offset), TQMX86_GPIODD); |
| |
| return 0; |
| } |
| |
| static int tqmx86_gpio_get_direction(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); |
| u8 val; |
| |
| val = tqmx86_gpio_read(gpio, TQMX86_GPIODD); |
| |
| if (val & BIT(offset)) |
| return GPIO_LINE_DIRECTION_OUT; |
| |
| return GPIO_LINE_DIRECTION_IN; |
| } |
| |
| static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int hwirq) |
| __must_hold(&gpio->spinlock) |
| { |
| u8 type = TQMX86_INT_TRIG_NONE; |
| int gpiic_irq = hwirq - TQMX86_NGPO; |
| |
| if (gpio->irq_type[hwirq] & TQMX86_INT_UNMASKED) { |
| type = gpio->irq_type[hwirq] & TQMX86_INT_TRIG_MASK; |
| |
| if (type == TQMX86_INT_TRIG_BOTH) |
| type = tqmx86_gpio_get(&gpio->chip, hwirq) |
| ? TQMX86_INT_TRIG_FALLING |
| : TQMX86_INT_TRIG_RISING; |
| } |
| |
| tqmx86_gpio_clrsetbits(gpio, |
| TQMX86_GPIIC_MASK(gpiic_irq), |
| TQMX86_GPIIC_CONFIG(gpiic_irq, type), |
| TQMX86_GPIIC); |
| } |
| |
| static void tqmx86_gpio_irq_mask(struct irq_data *data) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data( |
| irq_data_get_irq_chip_data(data)); |
| |
| scoped_guard(raw_spinlock_irqsave, &gpio->spinlock) { |
| gpio->irq_type[data->hwirq] &= ~TQMX86_INT_UNMASKED; |
| tqmx86_gpio_irq_config(gpio, data->hwirq); |
| } |
| |
| gpiochip_disable_irq(&gpio->chip, irqd_to_hwirq(data)); |
| } |
| |
| static void tqmx86_gpio_irq_unmask(struct irq_data *data) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data( |
| irq_data_get_irq_chip_data(data)); |
| |
| gpiochip_enable_irq(&gpio->chip, irqd_to_hwirq(data)); |
| |
| guard(raw_spinlock_irqsave)(&gpio->spinlock); |
| |
| gpio->irq_type[data->hwirq] |= TQMX86_INT_UNMASKED; |
| tqmx86_gpio_irq_config(gpio, data->hwirq); |
| } |
| |
| static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type) |
| { |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data( |
| irq_data_get_irq_chip_data(data)); |
| unsigned int edge_type = type & IRQF_TRIGGER_MASK; |
| u8 new_type; |
| |
| switch (edge_type) { |
| case IRQ_TYPE_EDGE_RISING: |
| new_type = TQMX86_INT_TRIG_RISING; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| new_type = TQMX86_INT_TRIG_FALLING; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| new_type = TQMX86_INT_TRIG_BOTH; |
| break; |
| default: |
| return -EINVAL; /* not supported */ |
| } |
| |
| guard(raw_spinlock_irqsave)(&gpio->spinlock); |
| |
| gpio->irq_type[data->hwirq] &= ~TQMX86_INT_TRIG_MASK; |
| gpio->irq_type[data->hwirq] |= new_type; |
| tqmx86_gpio_irq_config(gpio, data->hwirq); |
| |
| return 0; |
| } |
| |
| static void tqmx86_gpio_irq_handler(struct irq_desc *desc) |
| { |
| struct gpio_chip *chip = irq_desc_get_handler_data(desc); |
| struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); |
| struct irq_chip *irq_chip = irq_desc_get_chip(desc); |
| unsigned long irq_bits; |
| int i, hwirq; |
| u8 irq_status; |
| |
| chained_irq_enter(irq_chip, desc); |
| |
| irq_status = tqmx86_gpio_read(gpio, TQMX86_GPIIS); |
| tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS); |
| |
| irq_bits = irq_status; |
| |
| scoped_guard(raw_spinlock_irqsave, &gpio->spinlock) { |
| for_each_set_bit(i, &irq_bits, TQMX86_NGPI) { |
| hwirq = i + TQMX86_NGPO; |
| |
| /* |
| * Edge-both triggers are implemented by flipping the |
| * edge trigger after each interrupt, as the controller |
| * only supports either rising or falling edge triggers, |
| * but not both. |
| * |
| * Internally, the TQMx86 GPIO controller has separate |
| * status registers for rising and falling edge |
| * interrupts. GPIIC configures which bits from which |
| * register are visible in the interrupt status register |
| * GPIIS and defines what triggers the parent IRQ line. |
| * Writing to GPIIS always clears both rising and |
| * falling interrupt flags internally, regardless of the |
| * currently configured trigger. |
| * |
| * In consequence, we can cleanly implement the |
| * edge-both trigger in software by first clearing the |
| * interrupt and then setting the new trigger based on |
| * the current GPIO input in tqmx86_gpio_irq_config() - |
| * even if an edge arrives between reading the input and |
| * setting the trigger, we will have a new interrupt |
| * pending. |
| */ |
| if ((gpio->irq_type[hwirq] & TQMX86_INT_TRIG_MASK) == |
| TQMX86_INT_TRIG_BOTH) |
| tqmx86_gpio_irq_config(gpio, hwirq); |
| } |
| } |
| |
| for_each_set_bit(i, &irq_bits, TQMX86_NGPI) |
| generic_handle_domain_irq(gpio->chip.irq.domain, |
| i + TQMX86_NGPO); |
| |
| chained_irq_exit(irq_chip, desc); |
| } |
| |
| /* Minimal runtime PM is needed by the IRQ subsystem */ |
| static int __maybe_unused tqmx86_gpio_runtime_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int __maybe_unused tqmx86_gpio_runtime_resume(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static const struct dev_pm_ops tqmx86_gpio_dev_pm_ops = { |
| SET_RUNTIME_PM_OPS(tqmx86_gpio_runtime_suspend, |
| tqmx86_gpio_runtime_resume, NULL) |
| }; |
| |
| static void tqmx86_init_irq_valid_mask(struct gpio_chip *chip, |
| unsigned long *valid_mask, |
| unsigned int ngpios) |
| { |
| /* Only GPIOs 4-7 are valid for interrupts. Clear the others */ |
| clear_bit(0, valid_mask); |
| clear_bit(1, valid_mask); |
| clear_bit(2, valid_mask); |
| clear_bit(3, valid_mask); |
| } |
| |
| static void tqmx86_gpio_irq_print_chip(struct irq_data *d, struct seq_file *p) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| |
| seq_puts(p, gc->label); |
| } |
| |
| static const struct irq_chip tqmx86_gpio_irq_chip = { |
| .irq_mask = tqmx86_gpio_irq_mask, |
| .irq_unmask = tqmx86_gpio_irq_unmask, |
| .irq_set_type = tqmx86_gpio_irq_set_type, |
| .irq_print_chip = tqmx86_gpio_irq_print_chip, |
| .flags = IRQCHIP_IMMUTABLE, |
| GPIOCHIP_IRQ_RESOURCE_HELPERS, |
| }; |
| |
| static int tqmx86_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct tqmx86_gpio_data *gpio; |
| struct gpio_chip *chip; |
| struct gpio_irq_chip *girq; |
| void __iomem *io_base; |
| struct resource *res; |
| int ret, irq; |
| |
| irq = platform_get_irq_optional(pdev, 0); |
| if (irq < 0 && irq != -ENXIO) |
| return irq; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Cannot get I/O\n"); |
| return -ENODEV; |
| } |
| |
| io_base = devm_ioport_map(&pdev->dev, res->start, resource_size(res)); |
| if (!io_base) |
| return -ENOMEM; |
| |
| gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); |
| if (!gpio) |
| return -ENOMEM; |
| |
| raw_spin_lock_init(&gpio->spinlock); |
| gpio->io_base = io_base; |
| |
| tqmx86_gpio_write(gpio, (u8)~TQMX86_DIR_INPUT_MASK, TQMX86_GPIODD); |
| |
| /* |
| * Reading the previous output state is not possible with TQMx86 hardware. |
| * Initialize all outputs to 0 to have a defined state that matches the |
| * shadow register. |
| */ |
| tqmx86_gpio_write(gpio, 0, TQMX86_GPIOD); |
| |
| chip = &gpio->chip; |
| chip->label = "gpio-tqmx86"; |
| chip->owner = THIS_MODULE; |
| chip->can_sleep = false; |
| chip->base = -1; |
| chip->direction_input = tqmx86_gpio_direction_input; |
| chip->direction_output = tqmx86_gpio_direction_output; |
| chip->get_direction = tqmx86_gpio_get_direction; |
| chip->get = tqmx86_gpio_get; |
| chip->set = tqmx86_gpio_set; |
| chip->ngpio = TQMX86_NGPIO; |
| chip->parent = pdev->dev.parent; |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| if (irq > 0) { |
| u8 irq_status; |
| |
| /* Mask all interrupts */ |
| tqmx86_gpio_write(gpio, 0, TQMX86_GPIIC); |
| |
| /* Clear all pending interrupts */ |
| irq_status = tqmx86_gpio_read(gpio, TQMX86_GPIIS); |
| tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS); |
| |
| girq = &chip->irq; |
| gpio_irq_chip_set_chip(girq, &tqmx86_gpio_irq_chip); |
| girq->parent_handler = tqmx86_gpio_irq_handler; |
| girq->num_parents = 1; |
| girq->parents = devm_kcalloc(&pdev->dev, 1, |
| sizeof(*girq->parents), |
| GFP_KERNEL); |
| if (!girq->parents) { |
| ret = -ENOMEM; |
| goto out_pm_dis; |
| } |
| girq->parents[0] = irq; |
| girq->default_type = IRQ_TYPE_NONE; |
| girq->handler = handle_simple_irq; |
| girq->init_valid_mask = tqmx86_init_irq_valid_mask; |
| |
| irq_domain_set_pm_device(girq->domain, dev); |
| } |
| |
| ret = devm_gpiochip_add_data(dev, chip, gpio); |
| if (ret) { |
| dev_err(dev, "Could not register GPIO chip\n"); |
| goto out_pm_dis; |
| } |
| |
| dev_info(dev, "GPIO functionality initialized with %d pins\n", |
| chip->ngpio); |
| |
| return 0; |
| |
| out_pm_dis: |
| pm_runtime_disable(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static struct platform_driver tqmx86_gpio_driver = { |
| .driver = { |
| .name = "tqmx86-gpio", |
| .pm = &tqmx86_gpio_dev_pm_ops, |
| }, |
| .probe = tqmx86_gpio_probe, |
| }; |
| |
| module_platform_driver(tqmx86_gpio_driver); |
| |
| MODULE_DESCRIPTION("TQMx86 PLD GPIO Driver"); |
| MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:tqmx86-gpio"); |