blob: 35ff062d09b50abf8244ab3566dcc350e8b427af [file] [log] [blame] [edit]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* HID driver for UC-Logic devices not fully compliant with HID standard
* - tablet initialization and parameter retrieval
*
* Copyright (c) 2018 Nikolai Kondrashov
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#ifndef _HID_UCLOGIC_PARAMS_H
#define _HID_UCLOGIC_PARAMS_H
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/list.h>
#define UCLOGIC_MOUSE_FRAME_QUIRK BIT(0)
#define UCLOGIC_BATTERY_QUIRK BIT(1)
/* Types of pen in-range reporting */
enum uclogic_params_pen_inrange {
/* Normal reports: zero - out of proximity, one - in proximity */
UCLOGIC_PARAMS_PEN_INRANGE_NORMAL = 0,
/* Inverted reports: zero - in proximity, one - out of proximity */
UCLOGIC_PARAMS_PEN_INRANGE_INVERTED,
/* No reports */
UCLOGIC_PARAMS_PEN_INRANGE_NONE,
};
/* Types of frames */
enum uclogic_params_frame_type {
/* Frame with buttons */
UCLOGIC_PARAMS_FRAME_BUTTONS = 0,
/* Frame with buttons and a dial */
UCLOGIC_PARAMS_FRAME_DIAL,
/* Frame with buttons and a mouse (shaped as a dial + touchpad) */
UCLOGIC_PARAMS_FRAME_MOUSE,
};
/*
* Pen report's subreport data.
*/
struct uclogic_params_pen_subreport {
/*
* The value of the second byte of the pen report indicating this
* subreport. If zero, the subreport should be considered invalid and
* not matched.
*/
__u8 value;
/*
* The ID to be assigned to the report, if the second byte of the pen
* report is equal to "value". Only valid if "value" is not zero.
*/
__u8 id;
};
/*
* Tablet interface's pen input parameters.
*
* Must use declarative (descriptive) language, not imperative, to simplify
* understanding and maintain consistency.
*
* Noop (preserving functionality) when filled with zeroes.
*/
struct uclogic_params_pen {
/*
* True if pen usage is invalid for this interface and should be
* ignored, false otherwise.
*/
bool usage_invalid;
/*
* Pointer to report descriptor part describing the pen inputs.
* Allocated with kmalloc. NULL if the part is not specified.
*/
const __u8 *desc_ptr;
/*
* Size of the report descriptor.
* Only valid, if "desc_ptr" is not NULL.
*/
unsigned int desc_size;
/* Report ID, if reports should be tweaked, zero if not */
unsigned int id;
/* The list of subreports, only valid if "id" is not zero */
struct uclogic_params_pen_subreport subreport_list[3];
/* Type of in-range reporting, only valid if "id" is not zero */
enum uclogic_params_pen_inrange inrange;
/*
* True, if reports include fragmented high resolution coords, with
* high-order X and then Y bytes following the pressure field.
* Only valid if "id" is not zero.
*/
bool fragmented_hires;
/*
* True if the pen reports tilt in bytes at offset 10 (X) and 11 (Y),
* and the Y tilt direction is flipped.
* Only valid if "id" is not zero.
*/
bool tilt_y_flipped;
};
/*
* Parameters of frame control inputs of a tablet interface.
*
* Must use declarative (descriptive) language, not imperative, to simplify
* understanding and maintain consistency.
*
* Noop (preserving functionality) when filled with zeroes.
*/
struct uclogic_params_frame {
/*
* Pointer to report descriptor part describing the frame inputs.
* Allocated with kmalloc. NULL if the part is not specified.
*/
const __u8 *desc_ptr;
/*
* Size of the report descriptor.
* Only valid, if "desc_ptr" is not NULL.
*/
unsigned int desc_size;
/*
* Report ID, if reports should be tweaked, zero if not.
*/
unsigned int id;
/*
* The suffix to add to the input device name, if not NULL.
*/
const char *suffix;
/*
* Number of the least-significant bit of the 2-bit state of a rotary
* encoder, in the report. Cannot point to a 2-bit field crossing a
* byte boundary. Zero if not present. Only valid if "id" is not zero.
*/
unsigned int re_lsb;
/*
* Offset of the Wacom-style device ID byte in the report, to be set
* to pad device ID (0xf), for compatibility with Wacom drivers. Zero
* if no changes to the report should be made. The ID byte will be set
* to zero whenever the byte pointed by "touch_byte" is zero, if
* the latter is valid. Only valid if "id" is not zero.
*/
unsigned int dev_id_byte;
/*
* Offset of the touch ring/strip state byte, in the report.
* Zero if not present. If dev_id_byte is also valid and non-zero,
* then the device ID byte will be cleared when the byte pointed to by
* this offset is zero. Only valid if "id" is not zero.
*/
unsigned int touch_byte;
/*
* The value to anchor the reversed touch ring/strip reports at.
* I.e. one, if the reports should be flipped without offset.
* Zero if no reversal should be done.
* Only valid if "touch_byte" is valid and not zero.
*/
__s8 touch_flip_at;
/*
* Maximum value of the touch ring/strip report around which the value
* should be wrapped when flipping according to "touch_flip_at".
* The minimum valid value is considered to be one, with zero being
* out-of-proximity (finger lift) value.
* Only valid if "touch_flip_at" is valid and not zero.
*/
__s8 touch_max;
/*
* Offset of the bitmap dial byte, in the report. Zero if not present.
* Only valid if "id" is not zero. A bitmap dial sends reports with a
* dedicated bit per direction: 1 means clockwise rotation, 2 means
* counterclockwise, as opposed to the normal 1 and -1.
*/
unsigned int bitmap_dial_byte;
};
/*
* List of works to be performed when a certain raw event is received.
*/
struct uclogic_raw_event_hook {
struct hid_device *hdev;
__u8 *event;
size_t size;
struct work_struct work;
struct list_head list;
};
/*
* Tablet interface report parameters.
*
* Must use declarative (descriptive) language, not imperative, to simplify
* understanding and maintain consistency.
*
* When filled with zeros represents a "noop" configuration - passes all
* reports unchanged and lets the generic HID driver handle everything.
*
* The resulting device report descriptor is assembled from all the report
* descriptor parts referenced by the structure. No order of assembly should
* be assumed. The structure represents original device report descriptor if
* all the parts are NULL.
*/
struct uclogic_params {
/*
* True if the whole interface is invalid, false otherwise.
*/
bool invalid;
/*
* Pointer to the common part of the replacement report descriptor,
* allocated with kmalloc. NULL if no common part is needed.
* Only valid, if "invalid" is false.
*/
const __u8 *desc_ptr;
/*
* Size of the common part of the replacement report descriptor.
* Only valid, if "desc_ptr" is valid and not NULL.
*/
unsigned int desc_size;
/*
* Pen parameters and optional report descriptor part.
* Only valid, if "invalid" is false.
*/
struct uclogic_params_pen pen;
/*
* The list of frame control parameters and optional report descriptor
* parts. Only valid, if "invalid" is false.
*/
struct uclogic_params_frame frame_list[3];
/*
* List of event hooks.
*/
struct uclogic_raw_event_hook *event_hooks;
};
/* Driver data */
struct uclogic_drvdata {
/* Interface parameters */
struct uclogic_params params;
/* Pointer to the replacement report descriptor. NULL if none. */
const __u8 *desc_ptr;
/*
* Size of the replacement report descriptor.
* Only valid if desc_ptr is not NULL
*/
unsigned int desc_size;
/* Pen input device */
struct input_dev *pen_input;
/* In-range timer */
struct timer_list inrange_timer;
/* Last rotary encoder state, or U8_MAX for none */
u8 re_state;
/* Device quirks */
unsigned long quirks;
};
/* Initialize a tablet interface and discover its parameters */
extern int uclogic_params_init(struct uclogic_params *params,
struct hid_device *hdev);
/* Get a replacement report descriptor for a tablet's interface. */
extern int uclogic_params_get_desc(const struct uclogic_params *params,
const __u8 **pdesc,
unsigned int *psize);
/* Free resources used by tablet interface's parameters */
extern void uclogic_params_cleanup(struct uclogic_params *params);
/* Dump tablet interface parameters with hid_dbg() */
extern void uclogic_params_hid_dbg(const struct hid_device *hdev,
const struct uclogic_params *params);
#endif /* _HID_UCLOGIC_PARAMS_H */