| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019 Intel Corporation. |
| |
| #include <linux/unaligned.h> |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| |
| #define OV5675_REG_VALUE_08BIT 1 |
| #define OV5675_REG_VALUE_16BIT 2 |
| #define OV5675_REG_VALUE_24BIT 3 |
| |
| #define OV5675_LINK_FREQ_450MHZ 450000000ULL |
| #define OV5675_SCLK 90000000LL |
| #define OV5675_XVCLK_19_2 19200000 |
| #define OV5675_DATA_LANES 2 |
| #define OV5675_RGB_DEPTH 10 |
| |
| #define OV5675_REG_CHIP_ID 0x300a |
| #define OV5675_CHIP_ID 0x5675 |
| |
| #define OV5675_REG_MODE_SELECT 0x0100 |
| #define OV5675_MODE_STANDBY 0x00 |
| #define OV5675_MODE_STREAMING 0x01 |
| |
| /* vertical-timings from sensor */ |
| #define OV5675_REG_VTS 0x380e |
| #define OV5675_VTS_30FPS 0x07e4 |
| #define OV5675_VTS_30FPS_MIN 0x07e4 |
| #define OV5675_VTS_MAX 0x7fff |
| |
| /* horizontal-timings from sensor */ |
| #define OV5675_REG_HTS 0x380c |
| |
| /* Exposure controls from sensor */ |
| #define OV5675_REG_EXPOSURE 0x3500 |
| #define OV5675_EXPOSURE_MIN 4 |
| #define OV5675_EXPOSURE_MAX_MARGIN 4 |
| #define OV5675_EXPOSURE_STEP 1 |
| |
| /* Analog gain controls from sensor */ |
| #define OV5675_REG_ANALOG_GAIN 0x3508 |
| #define OV5675_ANAL_GAIN_MIN 128 |
| #define OV5675_ANAL_GAIN_MAX 2047 |
| #define OV5675_ANAL_GAIN_STEP 1 |
| |
| /* Digital gain controls from sensor */ |
| #define OV5675_REG_DIGITAL_GAIN 0x350a |
| #define OV5675_REG_MWB_R_GAIN 0x5019 |
| #define OV5675_REG_MWB_G_GAIN 0x501b |
| #define OV5675_REG_MWB_B_GAIN 0x501d |
| #define OV5675_DGTL_GAIN_MIN 1024 |
| #define OV5675_DGTL_GAIN_MAX 4095 |
| #define OV5675_DGTL_GAIN_STEP 1 |
| #define OV5675_DGTL_GAIN_DEFAULT 1024 |
| |
| /* Group Access */ |
| #define OV5675_REG_GROUP_ACCESS 0x3208 |
| #define OV5675_GROUP_HOLD_START 0x0 |
| #define OV5675_GROUP_HOLD_END 0x10 |
| #define OV5675_GROUP_HOLD_LAUNCH 0xa0 |
| |
| /* Test Pattern Control */ |
| #define OV5675_REG_TEST_PATTERN 0x4503 |
| #define OV5675_TEST_PATTERN_ENABLE BIT(7) |
| #define OV5675_TEST_PATTERN_BAR_SHIFT 2 |
| |
| /* Flip Mirror Controls from sensor */ |
| #define OV5675_REG_FORMAT1 0x3820 |
| #define OV5675_REG_FORMAT2 0x373d |
| |
| #define to_ov5675(_sd) container_of(_sd, struct ov5675, sd) |
| |
| static const char * const ov5675_supply_names[] = { |
| "avdd", /* Analog power */ |
| "dovdd", /* Digital I/O power */ |
| "dvdd", /* Digital core power */ |
| }; |
| |
| #define OV5675_NUM_SUPPLIES ARRAY_SIZE(ov5675_supply_names) |
| |
| enum { |
| OV5675_LINK_FREQ_900MBPS, |
| }; |
| |
| struct ov5675_reg { |
| u16 address; |
| u8 val; |
| }; |
| |
| struct ov5675_reg_list { |
| u32 num_of_regs; |
| const struct ov5675_reg *regs; |
| }; |
| |
| struct ov5675_link_freq_config { |
| const struct ov5675_reg_list reg_list; |
| }; |
| |
| struct ov5675_mode { |
| /* Frame width in pixels */ |
| u32 width; |
| |
| /* Frame height in pixels */ |
| u32 height; |
| |
| /* Horizontal timining size */ |
| u32 hts; |
| |
| /* Default vertical timining size */ |
| u32 vts_def; |
| |
| /* Min vertical timining size */ |
| u32 vts_min; |
| |
| /* Link frequency needed for this resolution */ |
| u32 link_freq_index; |
| |
| /* Sensor register settings for this resolution */ |
| const struct ov5675_reg_list reg_list; |
| }; |
| |
| static const struct ov5675_reg mipi_data_rate_900mbps[] = { |
| {0x0103, 0x01}, |
| {0x0100, 0x00}, |
| {0x0300, 0x04}, |
| {0x0302, 0x8d}, |
| {0x0303, 0x00}, |
| {0x030d, 0x26}, |
| }; |
| |
| static const struct ov5675_reg mode_2592x1944_regs[] = { |
| {0x3002, 0x21}, |
| {0x3107, 0x23}, |
| {0x3501, 0x20}, |
| {0x3503, 0x0c}, |
| {0x3508, 0x03}, |
| {0x3509, 0x00}, |
| {0x3600, 0x66}, |
| {0x3602, 0x30}, |
| {0x3610, 0xa5}, |
| {0x3612, 0x93}, |
| {0x3620, 0x80}, |
| {0x3642, 0x0e}, |
| {0x3661, 0x00}, |
| {0x3662, 0x10}, |
| {0x3664, 0xf3}, |
| {0x3665, 0x9e}, |
| {0x3667, 0xa5}, |
| {0x366e, 0x55}, |
| {0x366f, 0x55}, |
| {0x3670, 0x11}, |
| {0x3671, 0x11}, |
| {0x3672, 0x11}, |
| {0x3673, 0x11}, |
| {0x3714, 0x24}, |
| {0x371a, 0x3e}, |
| {0x3733, 0x10}, |
| {0x3734, 0x00}, |
| {0x373d, 0x24}, |
| {0x3764, 0x20}, |
| {0x3765, 0x20}, |
| {0x3766, 0x12}, |
| {0x37a1, 0x14}, |
| {0x37a8, 0x1c}, |
| {0x37ab, 0x0f}, |
| {0x37c2, 0x04}, |
| {0x37cb, 0x00}, |
| {0x37cc, 0x00}, |
| {0x37cd, 0x00}, |
| {0x37ce, 0x00}, |
| {0x37d8, 0x02}, |
| {0x37d9, 0x08}, |
| {0x37dc, 0x04}, |
| {0x3800, 0x00}, |
| {0x3801, 0x00}, |
| {0x3802, 0x00}, |
| {0x3803, 0x04}, |
| {0x3804, 0x0a}, |
| {0x3805, 0x3f}, |
| {0x3806, 0x07}, |
| {0x3807, 0xb3}, |
| {0x3808, 0x0a}, |
| {0x3809, 0x20}, |
| {0x380a, 0x07}, |
| {0x380b, 0x98}, |
| {0x380c, 0x02}, |
| {0x380d, 0xee}, |
| {0x380e, 0x07}, |
| {0x380f, 0xe4}, |
| {0x3811, 0x10}, |
| {0x3813, 0x0d}, |
| {0x3814, 0x01}, |
| {0x3815, 0x01}, |
| {0x3816, 0x01}, |
| {0x3817, 0x01}, |
| {0x381e, 0x02}, |
| {0x3820, 0x88}, |
| {0x3821, 0x01}, |
| {0x3832, 0x04}, |
| {0x3c80, 0x01}, |
| {0x3c82, 0x00}, |
| {0x3c83, 0xc8}, |
| {0x3c8c, 0x0f}, |
| {0x3c8d, 0xa0}, |
| {0x3c90, 0x07}, |
| {0x3c91, 0x00}, |
| {0x3c92, 0x00}, |
| {0x3c93, 0x00}, |
| {0x3c94, 0xd0}, |
| {0x3c95, 0x50}, |
| {0x3c96, 0x35}, |
| {0x3c97, 0x00}, |
| {0x4001, 0xe0}, |
| {0x4008, 0x02}, |
| {0x4009, 0x0d}, |
| {0x400f, 0x80}, |
| {0x4013, 0x02}, |
| {0x4040, 0x00}, |
| {0x4041, 0x07}, |
| {0x404c, 0x50}, |
| {0x404e, 0x20}, |
| {0x4500, 0x06}, |
| {0x4503, 0x00}, |
| {0x450a, 0x04}, |
| {0x4809, 0x04}, |
| {0x480c, 0x12}, |
| {0x4819, 0x70}, |
| {0x4825, 0x32}, |
| {0x4826, 0x32}, |
| {0x482a, 0x06}, |
| {0x4833, 0x08}, |
| {0x4837, 0x0d}, |
| {0x5000, 0x77}, |
| {0x5b00, 0x01}, |
| {0x5b01, 0x10}, |
| {0x5b02, 0x01}, |
| {0x5b03, 0xdb}, |
| {0x5b05, 0x6c}, |
| {0x5e10, 0xfc}, |
| {0x3500, 0x00}, |
| {0x3501, 0x3E}, |
| {0x3502, 0x60}, |
| {0x3503, 0x08}, |
| {0x3508, 0x04}, |
| {0x3509, 0x00}, |
| {0x3832, 0x48}, |
| {0x5780, 0x3e}, |
| {0x5781, 0x0f}, |
| {0x5782, 0x44}, |
| {0x5783, 0x02}, |
| {0x5784, 0x01}, |
| {0x5785, 0x01}, |
| {0x5786, 0x00}, |
| {0x5787, 0x04}, |
| {0x5788, 0x02}, |
| {0x5789, 0x0f}, |
| {0x578a, 0xfd}, |
| {0x578b, 0xf5}, |
| {0x578c, 0xf5}, |
| {0x578d, 0x03}, |
| {0x578e, 0x08}, |
| {0x578f, 0x0c}, |
| {0x5790, 0x08}, |
| {0x5791, 0x06}, |
| {0x5792, 0x00}, |
| {0x5793, 0x52}, |
| {0x5794, 0xa3}, |
| {0x4003, 0x40}, |
| {0x3107, 0x01}, |
| {0x3c80, 0x08}, |
| {0x3c83, 0xb1}, |
| {0x3c8c, 0x10}, |
| {0x3c8d, 0x00}, |
| {0x3c90, 0x00}, |
| {0x3c94, 0x00}, |
| {0x3c95, 0x00}, |
| {0x3c96, 0x00}, |
| {0x37cb, 0x09}, |
| {0x37cc, 0x15}, |
| {0x37cd, 0x1f}, |
| {0x37ce, 0x1f}, |
| }; |
| |
| static const struct ov5675_reg mode_1296x972_regs[] = { |
| {0x3002, 0x21}, |
| {0x3107, 0x23}, |
| {0x3501, 0x20}, |
| {0x3503, 0x0c}, |
| {0x3508, 0x03}, |
| {0x3509, 0x00}, |
| {0x3600, 0x66}, |
| {0x3602, 0x30}, |
| {0x3610, 0xa5}, |
| {0x3612, 0x93}, |
| {0x3620, 0x80}, |
| {0x3642, 0x0e}, |
| {0x3661, 0x00}, |
| {0x3662, 0x08}, |
| {0x3664, 0xf3}, |
| {0x3665, 0x9e}, |
| {0x3667, 0xa5}, |
| {0x366e, 0x55}, |
| {0x366f, 0x55}, |
| {0x3670, 0x11}, |
| {0x3671, 0x11}, |
| {0x3672, 0x11}, |
| {0x3673, 0x11}, |
| {0x3714, 0x28}, |
| {0x371a, 0x3e}, |
| {0x3733, 0x10}, |
| {0x3734, 0x00}, |
| {0x373d, 0x24}, |
| {0x3764, 0x20}, |
| {0x3765, 0x20}, |
| {0x3766, 0x12}, |
| {0x37a1, 0x14}, |
| {0x37a8, 0x1c}, |
| {0x37ab, 0x0f}, |
| {0x37c2, 0x14}, |
| {0x37cb, 0x00}, |
| {0x37cc, 0x00}, |
| {0x37cd, 0x00}, |
| {0x37ce, 0x00}, |
| {0x37d8, 0x02}, |
| {0x37d9, 0x04}, |
| {0x37dc, 0x04}, |
| {0x3800, 0x00}, |
| {0x3801, 0x00}, |
| {0x3802, 0x00}, |
| {0x3803, 0x00}, |
| {0x3804, 0x0a}, |
| {0x3805, 0x3f}, |
| {0x3806, 0x07}, |
| {0x3807, 0xb7}, |
| {0x3808, 0x05}, |
| {0x3809, 0x10}, |
| {0x380a, 0x03}, |
| {0x380b, 0xcc}, |
| {0x380c, 0x02}, |
| {0x380d, 0xee}, |
| {0x380e, 0x07}, |
| {0x380f, 0xd0}, |
| {0x3811, 0x08}, |
| {0x3813, 0x0d}, |
| {0x3814, 0x03}, |
| {0x3815, 0x01}, |
| {0x3816, 0x03}, |
| {0x3817, 0x01}, |
| {0x381e, 0x02}, |
| {0x3820, 0x8b}, |
| {0x3821, 0x01}, |
| {0x3832, 0x04}, |
| {0x3c80, 0x01}, |
| {0x3c82, 0x00}, |
| {0x3c83, 0xc8}, |
| {0x3c8c, 0x0f}, |
| {0x3c8d, 0xa0}, |
| {0x3c90, 0x07}, |
| {0x3c91, 0x00}, |
| {0x3c92, 0x00}, |
| {0x3c93, 0x00}, |
| {0x3c94, 0xd0}, |
| {0x3c95, 0x50}, |
| {0x3c96, 0x35}, |
| {0x3c97, 0x00}, |
| {0x4001, 0xe0}, |
| {0x4008, 0x00}, |
| {0x4009, 0x07}, |
| {0x400f, 0x80}, |
| {0x4013, 0x02}, |
| {0x4040, 0x00}, |
| {0x4041, 0x03}, |
| {0x404c, 0x50}, |
| {0x404e, 0x20}, |
| {0x4500, 0x06}, |
| {0x4503, 0x00}, |
| {0x450a, 0x04}, |
| {0x4809, 0x04}, |
| {0x480c, 0x12}, |
| {0x4819, 0x70}, |
| {0x4825, 0x32}, |
| {0x4826, 0x32}, |
| {0x482a, 0x06}, |
| {0x4833, 0x08}, |
| {0x4837, 0x0d}, |
| {0x5000, 0x77}, |
| {0x5b00, 0x01}, |
| {0x5b01, 0x10}, |
| {0x5b02, 0x01}, |
| {0x5b03, 0xdb}, |
| {0x5b05, 0x6c}, |
| {0x5e10, 0xfc}, |
| {0x3500, 0x00}, |
| {0x3501, 0x1F}, |
| {0x3502, 0x20}, |
| {0x3503, 0x08}, |
| {0x3508, 0x04}, |
| {0x3509, 0x00}, |
| {0x3832, 0x48}, |
| {0x5780, 0x3e}, |
| {0x5781, 0x0f}, |
| {0x5782, 0x44}, |
| {0x5783, 0x02}, |
| {0x5784, 0x01}, |
| {0x5785, 0x01}, |
| {0x5786, 0x00}, |
| {0x5787, 0x04}, |
| {0x5788, 0x02}, |
| {0x5789, 0x0f}, |
| {0x578a, 0xfd}, |
| {0x578b, 0xf5}, |
| {0x578c, 0xf5}, |
| {0x578d, 0x03}, |
| {0x578e, 0x08}, |
| {0x578f, 0x0c}, |
| {0x5790, 0x08}, |
| {0x5791, 0x06}, |
| {0x5792, 0x00}, |
| {0x5793, 0x52}, |
| {0x5794, 0xa3}, |
| {0x4003, 0x40}, |
| {0x3107, 0x01}, |
| {0x3c80, 0x08}, |
| {0x3c83, 0xb1}, |
| {0x3c8c, 0x10}, |
| {0x3c8d, 0x00}, |
| {0x3c90, 0x00}, |
| {0x3c94, 0x00}, |
| {0x3c95, 0x00}, |
| {0x3c96, 0x00}, |
| {0x37cb, 0x09}, |
| {0x37cc, 0x15}, |
| {0x37cd, 0x1f}, |
| {0x37ce, 0x1f}, |
| }; |
| |
| static const char * const ov5675_test_pattern_menu[] = { |
| "Disabled", |
| "Standard Color Bar", |
| "Top-Bottom Darker Color Bar", |
| "Right-Left Darker Color Bar", |
| "Bottom-Top Darker Color Bar" |
| }; |
| |
| static const s64 link_freq_menu_items[] = { |
| OV5675_LINK_FREQ_450MHZ, |
| }; |
| |
| static const struct ov5675_link_freq_config link_freq_configs[] = { |
| [OV5675_LINK_FREQ_900MBPS] = { |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mipi_data_rate_900mbps), |
| .regs = mipi_data_rate_900mbps, |
| } |
| } |
| }; |
| |
| static const struct ov5675_mode supported_modes[] = { |
| { |
| .width = 2592, |
| .height = 1944, |
| .hts = 1500, |
| .vts_def = OV5675_VTS_30FPS, |
| .vts_min = OV5675_VTS_30FPS_MIN, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_2592x1944_regs), |
| .regs = mode_2592x1944_regs, |
| }, |
| .link_freq_index = OV5675_LINK_FREQ_900MBPS, |
| }, |
| { |
| .width = 1296, |
| .height = 972, |
| .hts = 1500, |
| .vts_def = OV5675_VTS_30FPS, |
| .vts_min = OV5675_VTS_30FPS_MIN, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_1296x972_regs), |
| .regs = mode_1296x972_regs, |
| }, |
| .link_freq_index = OV5675_LINK_FREQ_900MBPS, |
| } |
| }; |
| |
| struct ov5675 { |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct clk *xvclk; |
| struct gpio_desc *reset_gpio; |
| struct regulator_bulk_data supplies[OV5675_NUM_SUPPLIES]; |
| |
| /* V4L2 Controls */ |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *exposure; |
| |
| /* Current mode */ |
| const struct ov5675_mode *cur_mode; |
| |
| /* To serialize asynchronous callbacks */ |
| struct mutex mutex; |
| |
| /* True if the device has been identified */ |
| bool identified; |
| }; |
| |
| static u64 to_pixel_rate(u32 f_index) |
| { |
| u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV5675_DATA_LANES; |
| |
| do_div(pixel_rate, OV5675_RGB_DEPTH); |
| |
| return pixel_rate; |
| } |
| |
| static u64 to_pixels_per_line(u32 hts, u32 f_index) |
| { |
| u64 ppl = hts * to_pixel_rate(f_index); |
| |
| do_div(ppl, OV5675_SCLK); |
| |
| return ppl; |
| } |
| |
| static int ov5675_read_reg(struct ov5675 *ov5675, u16 reg, u16 len, u32 *val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| struct i2c_msg msgs[2]; |
| u8 addr_buf[2]; |
| u8 data_buf[4] = {0}; |
| int ret; |
| |
| if (len > 4) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, addr_buf); |
| msgs[0].addr = client->addr; |
| msgs[0].flags = 0; |
| msgs[0].len = sizeof(addr_buf); |
| msgs[0].buf = addr_buf; |
| msgs[1].addr = client->addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = len; |
| msgs[1].buf = &data_buf[4 - len]; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret != ARRAY_SIZE(msgs)) |
| return -EIO; |
| |
| *val = get_unaligned_be32(data_buf); |
| |
| return 0; |
| } |
| |
| static int ov5675_write_reg(struct ov5675 *ov5675, u16 reg, u16 len, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| u8 buf[6]; |
| |
| if (len > 4) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, buf); |
| put_unaligned_be32(val << 8 * (4 - len), buf + 2); |
| if (i2c_master_send(client, buf, len + 2) != len + 2) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int ov5675_write_reg_list(struct ov5675 *ov5675, |
| const struct ov5675_reg_list *r_list) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < r_list->num_of_regs; i++) { |
| ret = ov5675_write_reg(ov5675, r_list->regs[i].address, 1, |
| r_list->regs[i].val); |
| if (ret) { |
| dev_err_ratelimited(&client->dev, |
| "failed to write reg 0x%4.4x. error = %d", |
| r_list->regs[i].address, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ov5675_update_digital_gain(struct ov5675 *ov5675, u32 d_gain) |
| { |
| int ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_GROUP_ACCESS, |
| OV5675_REG_VALUE_08BIT, |
| OV5675_GROUP_HOLD_START); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_MWB_R_GAIN, |
| OV5675_REG_VALUE_16BIT, d_gain); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_MWB_G_GAIN, |
| OV5675_REG_VALUE_16BIT, d_gain); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_MWB_B_GAIN, |
| OV5675_REG_VALUE_16BIT, d_gain); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_GROUP_ACCESS, |
| OV5675_REG_VALUE_08BIT, |
| OV5675_GROUP_HOLD_END); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_GROUP_ACCESS, |
| OV5675_REG_VALUE_08BIT, |
| OV5675_GROUP_HOLD_LAUNCH); |
| return ret; |
| } |
| |
| static int ov5675_test_pattern(struct ov5675 *ov5675, u32 pattern) |
| { |
| if (pattern) |
| pattern = (pattern - 1) << OV5675_TEST_PATTERN_BAR_SHIFT | |
| OV5675_TEST_PATTERN_ENABLE; |
| |
| return ov5675_write_reg(ov5675, OV5675_REG_TEST_PATTERN, |
| OV5675_REG_VALUE_08BIT, pattern); |
| } |
| |
| /* |
| * OV5675 supports keeping the pixel order by mirror and flip function |
| * The Bayer order isn't affected by the flip controls |
| */ |
| static int ov5675_set_ctrl_hflip(struct ov5675 *ov5675, u32 ctrl_val) |
| { |
| int ret; |
| u32 val; |
| |
| ret = ov5675_read_reg(ov5675, OV5675_REG_FORMAT1, |
| OV5675_REG_VALUE_08BIT, &val); |
| if (ret) |
| return ret; |
| |
| return ov5675_write_reg(ov5675, OV5675_REG_FORMAT1, |
| OV5675_REG_VALUE_08BIT, |
| ctrl_val ? val & ~BIT(3) : val | BIT(3)); |
| } |
| |
| static int ov5675_set_ctrl_vflip(struct ov5675 *ov5675, u8 ctrl_val) |
| { |
| int ret; |
| u32 val; |
| |
| ret = ov5675_read_reg(ov5675, OV5675_REG_FORMAT1, |
| OV5675_REG_VALUE_08BIT, &val); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_FORMAT1, |
| OV5675_REG_VALUE_08BIT, |
| ctrl_val ? val | BIT(4) | BIT(5) : val & ~BIT(4) & ~BIT(5)); |
| |
| if (ret) |
| return ret; |
| |
| ret = ov5675_read_reg(ov5675, OV5675_REG_FORMAT2, |
| OV5675_REG_VALUE_08BIT, &val); |
| |
| if (ret) |
| return ret; |
| |
| return ov5675_write_reg(ov5675, OV5675_REG_FORMAT2, |
| OV5675_REG_VALUE_08BIT, |
| ctrl_val ? val | BIT(1) : val & ~BIT(1)); |
| } |
| |
| static int ov5675_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov5675 *ov5675 = container_of(ctrl->handler, |
| struct ov5675, ctrl_handler); |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| s64 exposure_max; |
| int ret = 0; |
| |
| /* Propagate change of current control to all related controls */ |
| if (ctrl->id == V4L2_CID_VBLANK) { |
| /* Update max exposure while meeting expected vblanking */ |
| exposure_max = ov5675->cur_mode->height + ctrl->val - |
| OV5675_EXPOSURE_MAX_MARGIN; |
| __v4l2_ctrl_modify_range(ov5675->exposure, |
| ov5675->exposure->minimum, |
| exposure_max, ov5675->exposure->step, |
| exposure_max); |
| } |
| |
| /* V4L2 controls values will be applied only when power is already up */ |
| if (!pm_runtime_get_if_in_use(&client->dev)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ANALOGUE_GAIN: |
| ret = ov5675_write_reg(ov5675, OV5675_REG_ANALOG_GAIN, |
| OV5675_REG_VALUE_16BIT, ctrl->val); |
| break; |
| |
| case V4L2_CID_DIGITAL_GAIN: |
| ret = ov5675_update_digital_gain(ov5675, ctrl->val); |
| break; |
| |
| case V4L2_CID_EXPOSURE: |
| /* 4 least significant bits of expsoure are fractional part |
| * val = val << 4 |
| * for ov5675, the unit of exposure is different from other |
| * OmniVision sensors, its exposure value is twice of the |
| * register value, the exposure should be divided by 2 before |
| * set register, e.g. val << 3. |
| */ |
| ret = ov5675_write_reg(ov5675, OV5675_REG_EXPOSURE, |
| OV5675_REG_VALUE_24BIT, ctrl->val << 3); |
| break; |
| |
| case V4L2_CID_VBLANK: |
| ret = ov5675_write_reg(ov5675, OV5675_REG_VTS, |
| OV5675_REG_VALUE_16BIT, |
| ov5675->cur_mode->height + ctrl->val + |
| 10); |
| break; |
| |
| case V4L2_CID_TEST_PATTERN: |
| ret = ov5675_test_pattern(ov5675, ctrl->val); |
| break; |
| |
| case V4L2_CID_HFLIP: |
| ov5675_set_ctrl_hflip(ov5675, ctrl->val); |
| break; |
| |
| case V4L2_CID_VFLIP: |
| ov5675_set_ctrl_vflip(ov5675, ctrl->val); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| pm_runtime_put(&client->dev); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops ov5675_ctrl_ops = { |
| .s_ctrl = ov5675_set_ctrl, |
| }; |
| |
| static int ov5675_init_controls(struct ov5675 *ov5675) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| struct v4l2_fwnode_device_properties props; |
| struct v4l2_ctrl_handler *ctrl_hdlr; |
| s64 exposure_max, h_blank; |
| int ret; |
| |
| ctrl_hdlr = &ov5675->ctrl_handler; |
| ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10); |
| if (ret) |
| return ret; |
| |
| ctrl_hdlr->lock = &ov5675->mutex; |
| ov5675->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq_menu_items) - 1, |
| 0, link_freq_menu_items); |
| if (ov5675->link_freq) |
| ov5675->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| ov5675->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, 0, |
| to_pixel_rate(OV5675_LINK_FREQ_900MBPS), |
| 1, |
| to_pixel_rate(OV5675_LINK_FREQ_900MBPS)); |
| ov5675->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_VBLANK, |
| ov5675->cur_mode->vts_min - ov5675->cur_mode->height, |
| OV5675_VTS_MAX - ov5675->cur_mode->height, 1, |
| ov5675->cur_mode->vts_def - ov5675->cur_mode->height); |
| h_blank = to_pixels_per_line(ov5675->cur_mode->hts, |
| ov5675->cur_mode->link_freq_index) - ov5675->cur_mode->width; |
| ov5675->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_HBLANK, h_blank, h_blank, 1, |
| h_blank); |
| if (ov5675->hblank) |
| ov5675->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, |
| OV5675_ANAL_GAIN_MIN, OV5675_ANAL_GAIN_MAX, |
| OV5675_ANAL_GAIN_STEP, OV5675_ANAL_GAIN_MIN); |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, V4L2_CID_DIGITAL_GAIN, |
| OV5675_DGTL_GAIN_MIN, OV5675_DGTL_GAIN_MAX, |
| OV5675_DGTL_GAIN_STEP, OV5675_DGTL_GAIN_DEFAULT); |
| exposure_max = (ov5675->cur_mode->vts_def - OV5675_EXPOSURE_MAX_MARGIN); |
| ov5675->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| OV5675_EXPOSURE_MIN, exposure_max, |
| OV5675_EXPOSURE_STEP, |
| exposure_max); |
| v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(ov5675_test_pattern_menu) - 1, |
| 0, 0, ov5675_test_pattern_menu); |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_HFLIP, 0, 1, 1, 0); |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| |
| if (ctrl_hdlr->error) { |
| v4l2_ctrl_handler_free(ctrl_hdlr); |
| return ctrl_hdlr->error; |
| } |
| |
| ret = v4l2_fwnode_device_parse(&client->dev, &props); |
| if (ret) |
| goto error; |
| |
| ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov5675_ctrl_ops, |
| &props); |
| if (ret) |
| goto error; |
| |
| ov5675->sd.ctrl_handler = ctrl_hdlr; |
| |
| return 0; |
| |
| error: |
| v4l2_ctrl_handler_free(ctrl_hdlr); |
| |
| return ret; |
| } |
| |
| static void ov5675_update_pad_format(const struct ov5675_mode *mode, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| fmt->width = mode->width; |
| fmt->height = mode->height; |
| fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; |
| fmt->field = V4L2_FIELD_NONE; |
| } |
| |
| static int ov5675_identify_module(struct ov5675 *ov5675) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| int ret; |
| u32 val; |
| |
| if (ov5675->identified) |
| return 0; |
| |
| ret = ov5675_read_reg(ov5675, OV5675_REG_CHIP_ID, |
| OV5675_REG_VALUE_24BIT, &val); |
| if (ret) |
| return ret; |
| |
| if (val != OV5675_CHIP_ID) { |
| dev_err(&client->dev, "chip id mismatch: %x!=%x", |
| OV5675_CHIP_ID, val); |
| return -ENXIO; |
| } |
| |
| ov5675->identified = true; |
| |
| return 0; |
| } |
| |
| static int ov5675_start_streaming(struct ov5675 *ov5675) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| const struct ov5675_reg_list *reg_list; |
| int link_freq_index, ret; |
| |
| ret = ov5675_identify_module(ov5675); |
| if (ret) |
| return ret; |
| |
| link_freq_index = ov5675->cur_mode->link_freq_index; |
| reg_list = &link_freq_configs[link_freq_index].reg_list; |
| ret = ov5675_write_reg_list(ov5675, reg_list); |
| if (ret) { |
| dev_err(&client->dev, "failed to set plls"); |
| return ret; |
| } |
| |
| reg_list = &ov5675->cur_mode->reg_list; |
| ret = ov5675_write_reg_list(ov5675, reg_list); |
| if (ret) { |
| dev_err(&client->dev, "failed to set mode"); |
| return ret; |
| } |
| |
| ret = __v4l2_ctrl_handler_setup(ov5675->sd.ctrl_handler); |
| if (ret) |
| return ret; |
| |
| ret = ov5675_write_reg(ov5675, OV5675_REG_MODE_SELECT, |
| OV5675_REG_VALUE_08BIT, OV5675_MODE_STREAMING); |
| if (ret) { |
| dev_err(&client->dev, "failed to set stream"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void ov5675_stop_streaming(struct ov5675 *ov5675) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd); |
| |
| if (ov5675_write_reg(ov5675, OV5675_REG_MODE_SELECT, |
| OV5675_REG_VALUE_08BIT, OV5675_MODE_STANDBY)) |
| dev_err(&client->dev, "failed to set stream"); |
| } |
| |
| static int ov5675_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret = 0; |
| |
| mutex_lock(&ov5675->mutex); |
| if (enable) { |
| ret = pm_runtime_resume_and_get(&client->dev); |
| if (ret < 0) { |
| mutex_unlock(&ov5675->mutex); |
| return ret; |
| } |
| |
| ret = ov5675_start_streaming(ov5675); |
| if (ret) { |
| enable = 0; |
| ov5675_stop_streaming(ov5675); |
| pm_runtime_put(&client->dev); |
| } |
| } else { |
| ov5675_stop_streaming(ov5675); |
| pm_runtime_put(&client->dev); |
| } |
| |
| mutex_unlock(&ov5675->mutex); |
| |
| return ret; |
| } |
| |
| static int ov5675_power_off(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| |
| usleep_range(90, 100); |
| |
| clk_disable_unprepare(ov5675->xvclk); |
| gpiod_set_value_cansleep(ov5675->reset_gpio, 1); |
| regulator_bulk_disable(OV5675_NUM_SUPPLIES, ov5675->supplies); |
| |
| return 0; |
| } |
| |
| static int ov5675_power_on(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| int ret; |
| |
| ret = clk_prepare_enable(ov5675->xvclk); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable xvclk: %d\n", ret); |
| return ret; |
| } |
| |
| gpiod_set_value_cansleep(ov5675->reset_gpio, 1); |
| |
| ret = regulator_bulk_enable(OV5675_NUM_SUPPLIES, ov5675->supplies); |
| if (ret) { |
| clk_disable_unprepare(ov5675->xvclk); |
| return ret; |
| } |
| |
| /* Reset pulse should be at least 2ms and reset gpio released only once |
| * regulators are stable. |
| */ |
| usleep_range(2000, 2200); |
| |
| gpiod_set_value_cansleep(ov5675->reset_gpio, 0); |
| |
| /* Worst case quiesence gap is 1.365 milliseconds @ 6MHz XVCLK |
| * Add an additional threshold grace period to ensure reset |
| * completion before initiating our first I2C transaction. |
| */ |
| usleep_range(1500, 1600); |
| |
| return 0; |
| } |
| |
| static int ov5675_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| const struct ov5675_mode *mode; |
| s32 vblank_def, h_blank; |
| |
| mode = v4l2_find_nearest_size(supported_modes, |
| ARRAY_SIZE(supported_modes), width, |
| height, fmt->format.width, |
| fmt->format.height); |
| |
| mutex_lock(&ov5675->mutex); |
| ov5675_update_pad_format(mode, &fmt->format); |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| *v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format; |
| } else { |
| ov5675->cur_mode = mode; |
| __v4l2_ctrl_s_ctrl(ov5675->link_freq, mode->link_freq_index); |
| __v4l2_ctrl_s_ctrl_int64(ov5675->pixel_rate, |
| to_pixel_rate(mode->link_freq_index)); |
| |
| /* Update limits and set FPS to default */ |
| vblank_def = mode->vts_def - mode->height; |
| __v4l2_ctrl_modify_range(ov5675->vblank, |
| mode->vts_min - mode->height, |
| OV5675_VTS_MAX - mode->height, 1, |
| vblank_def); |
| __v4l2_ctrl_s_ctrl(ov5675->vblank, vblank_def); |
| h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) - |
| mode->width; |
| __v4l2_ctrl_modify_range(ov5675->hblank, h_blank, h_blank, 1, |
| h_blank); |
| } |
| |
| mutex_unlock(&ov5675->mutex); |
| |
| return 0; |
| } |
| |
| static int ov5675_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| |
| mutex_lock(&ov5675->mutex); |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) |
| fmt->format = *v4l2_subdev_state_get_format(sd_state, |
| fmt->pad); |
| else |
| ov5675_update_pad_format(ov5675->cur_mode, &fmt->format); |
| |
| mutex_unlock(&ov5675->mutex); |
| |
| return 0; |
| } |
| |
| static int ov5675_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *state, |
| struct v4l2_subdev_selection *sel) |
| { |
| if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) |
| return -EINVAL; |
| |
| switch (sel->target) { |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| sel->r.top = 0; |
| sel->r.left = 0; |
| sel->r.width = 2624; |
| sel->r.height = 2000; |
| return 0; |
| case V4L2_SEL_TGT_CROP: |
| case V4L2_SEL_TGT_CROP_DEFAULT: |
| sel->r.top = 16; |
| sel->r.left = 16; |
| sel->r.width = 2592; |
| sel->r.height = 1944; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int ov5675_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = MEDIA_BUS_FMT_SGRBG10_1X10; |
| |
| return 0; |
| } |
| |
| static int ov5675_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| if (fse->index >= ARRAY_SIZE(supported_modes)) |
| return -EINVAL; |
| |
| if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10) |
| return -EINVAL; |
| |
| fse->min_width = supported_modes[fse->index].width; |
| fse->max_width = fse->min_width; |
| fse->min_height = supported_modes[fse->index].height; |
| fse->max_height = fse->min_height; |
| |
| return 0; |
| } |
| |
| static int ov5675_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| |
| mutex_lock(&ov5675->mutex); |
| ov5675_update_pad_format(&supported_modes[0], |
| v4l2_subdev_state_get_format(fh->state, 0)); |
| mutex_unlock(&ov5675->mutex); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_video_ops ov5675_video_ops = { |
| .s_stream = ov5675_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops ov5675_pad_ops = { |
| .set_fmt = ov5675_set_format, |
| .get_fmt = ov5675_get_format, |
| .get_selection = ov5675_get_selection, |
| .enum_mbus_code = ov5675_enum_mbus_code, |
| .enum_frame_size = ov5675_enum_frame_size, |
| }; |
| |
| static const struct v4l2_subdev_ops ov5675_subdev_ops = { |
| .video = &ov5675_video_ops, |
| .pad = &ov5675_pad_ops, |
| }; |
| |
| static const struct media_entity_operations ov5675_subdev_entity_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops ov5675_internal_ops = { |
| .open = ov5675_open, |
| }; |
| |
| static int ov5675_get_hwcfg(struct ov5675 *ov5675, struct device *dev) |
| { |
| struct fwnode_handle *ep; |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| u32 xvclk_rate; |
| int ret; |
| unsigned int i, j; |
| |
| if (!fwnode) |
| return -ENXIO; |
| |
| ov5675->xvclk = devm_clk_get_optional(dev, NULL); |
| if (IS_ERR(ov5675->xvclk)) |
| return dev_err_probe(dev, PTR_ERR(ov5675->xvclk), |
| "failed to get xvclk: %ld\n", |
| PTR_ERR(ov5675->xvclk)); |
| |
| if (ov5675->xvclk) { |
| xvclk_rate = clk_get_rate(ov5675->xvclk); |
| } else { |
| ret = fwnode_property_read_u32(fwnode, "clock-frequency", |
| &xvclk_rate); |
| |
| if (ret) { |
| dev_err(dev, "can't get clock frequency"); |
| return ret; |
| } |
| } |
| |
| if (xvclk_rate != OV5675_XVCLK_19_2) { |
| dev_err(dev, "external clock rate %u is unsupported", |
| xvclk_rate); |
| return -EINVAL; |
| } |
| |
| ov5675->reset_gpio = devm_gpiod_get_optional(dev, "reset", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(ov5675->reset_gpio)) { |
| ret = PTR_ERR(ov5675->reset_gpio); |
| dev_err(dev, "failed to get reset-gpios: %d\n", ret); |
| return ret; |
| } |
| |
| for (i = 0; i < OV5675_NUM_SUPPLIES; i++) |
| ov5675->supplies[i].supply = ov5675_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(dev, OV5675_NUM_SUPPLIES, |
| ov5675->supplies); |
| if (ret) |
| return ret; |
| |
| ep = fwnode_graph_get_next_endpoint(fwnode, NULL); |
| if (!ep) |
| return -ENXIO; |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); |
| fwnode_handle_put(ep); |
| if (ret) |
| return ret; |
| |
| if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV5675_DATA_LANES) { |
| dev_err(dev, "number of CSI2 data lanes %d is not supported", |
| bus_cfg.bus.mipi_csi2.num_data_lanes); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| |
| if (!bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "no link frequencies defined"); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) { |
| for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) { |
| if (link_freq_menu_items[i] == |
| bus_cfg.link_frequencies[j]) |
| break; |
| } |
| |
| if (j == bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "no link frequency %lld supported", |
| link_freq_menu_items[i]); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| } |
| |
| check_hwcfg_error: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| |
| return ret; |
| } |
| |
| static void ov5675_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ov5675 *ov5675 = to_ov5675(sd); |
| |
| v4l2_async_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| pm_runtime_disable(&client->dev); |
| mutex_destroy(&ov5675->mutex); |
| |
| if (!pm_runtime_status_suspended(&client->dev)) |
| ov5675_power_off(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| } |
| |
| static int ov5675_probe(struct i2c_client *client) |
| { |
| struct ov5675 *ov5675; |
| bool full_power; |
| int ret; |
| |
| ov5675 = devm_kzalloc(&client->dev, sizeof(*ov5675), GFP_KERNEL); |
| if (!ov5675) |
| return -ENOMEM; |
| |
| ret = ov5675_get_hwcfg(ov5675, &client->dev); |
| if (ret) { |
| dev_err(&client->dev, "failed to get HW configuration: %d", |
| ret); |
| return ret; |
| } |
| |
| v4l2_i2c_subdev_init(&ov5675->sd, client, &ov5675_subdev_ops); |
| |
| ret = ov5675_power_on(&client->dev); |
| if (ret) { |
| dev_err(&client->dev, "failed to power on: %d\n", ret); |
| return ret; |
| } |
| |
| full_power = acpi_dev_state_d0(&client->dev); |
| if (full_power) { |
| ret = ov5675_identify_module(ov5675); |
| if (ret) { |
| dev_err(&client->dev, "failed to find sensor: %d", ret); |
| goto probe_power_off; |
| } |
| } |
| |
| mutex_init(&ov5675->mutex); |
| ov5675->cur_mode = &supported_modes[0]; |
| ret = ov5675_init_controls(ov5675); |
| if (ret) { |
| dev_err(&client->dev, "failed to init controls: %d", ret); |
| goto probe_error_v4l2_ctrl_handler_free; |
| } |
| |
| ov5675->sd.internal_ops = &ov5675_internal_ops; |
| ov5675->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| ov5675->sd.entity.ops = &ov5675_subdev_entity_ops; |
| ov5675->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| ov5675->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = media_entity_pads_init(&ov5675->sd.entity, 1, &ov5675->pad); |
| if (ret) { |
| dev_err(&client->dev, "failed to init entity pads: %d", ret); |
| goto probe_error_v4l2_ctrl_handler_free; |
| } |
| |
| ret = v4l2_async_register_subdev_sensor(&ov5675->sd); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to register V4L2 subdev: %d", |
| ret); |
| goto probe_error_media_entity_cleanup; |
| } |
| |
| /* Set the device's state to active if it's in D0 state. */ |
| if (full_power) |
| pm_runtime_set_active(&client->dev); |
| pm_runtime_enable(&client->dev); |
| pm_runtime_idle(&client->dev); |
| |
| return 0; |
| |
| probe_error_media_entity_cleanup: |
| media_entity_cleanup(&ov5675->sd.entity); |
| |
| probe_error_v4l2_ctrl_handler_free: |
| v4l2_ctrl_handler_free(ov5675->sd.ctrl_handler); |
| mutex_destroy(&ov5675->mutex); |
| probe_power_off: |
| ov5675_power_off(&client->dev); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops ov5675_pm_ops = { |
| SET_RUNTIME_PM_OPS(ov5675_power_off, ov5675_power_on, NULL) |
| }; |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id ov5675_acpi_ids[] = { |
| {"OVTI5675"}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, ov5675_acpi_ids); |
| #endif |
| |
| static const struct of_device_id ov5675_of_match[] = { |
| { .compatible = "ovti,ov5675", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, ov5675_of_match); |
| |
| static struct i2c_driver ov5675_i2c_driver = { |
| .driver = { |
| .name = "ov5675", |
| .pm = &ov5675_pm_ops, |
| .acpi_match_table = ACPI_PTR(ov5675_acpi_ids), |
| .of_match_table = ov5675_of_match, |
| }, |
| .probe = ov5675_probe, |
| .remove = ov5675_remove, |
| .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE, |
| }; |
| |
| module_i2c_driver(ov5675_i2c_driver); |
| |
| MODULE_AUTHOR("Shawn Tu"); |
| MODULE_DESCRIPTION("OmniVision OV5675 sensor driver"); |
| MODULE_LICENSE("GPL v2"); |