| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * System Control and Power Interface (SCMI) Protocol based i.MX pinctrl driver |
| * |
| * Copyright 2024 NXP |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/of.h> |
| #include <linux/scmi_protocol.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| |
| #include <linux/pinctrl/machine.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #include "../pinctrl-utils.h" |
| #include "../core.h" |
| #include "../pinconf.h" |
| #include "../pinmux.h" |
| |
| #define DRV_NAME "scmi-pinctrl-imx" |
| |
| struct scmi_pinctrl_imx { |
| struct device *dev; |
| struct scmi_protocol_handle *ph; |
| struct pinctrl_dev *pctldev; |
| struct pinctrl_desc pctl_desc; |
| const struct scmi_pinctrl_proto_ops *ops; |
| }; |
| |
| /* SCMI pin control types, aligned with SCMI firmware */ |
| #define IMX_SCMI_NUM_CFG 4 |
| #define IMX_SCMI_PIN_MUX 192 |
| #define IMX_SCMI_PIN_CONFIG 193 |
| #define IMX_SCMI_PIN_DAISY_ID 194 |
| #define IMX_SCMI_PIN_DAISY_CFG 195 |
| |
| #define IMX_SCMI_NO_PAD_CTL BIT(31) |
| #define IMX_SCMI_PAD_SION BIT(30) |
| #define IMX_SCMI_IOMUXC_CONFIG_SION BIT(4) |
| |
| #define IMX_SCMI_PIN_SIZE 24 |
| |
| #define IMX95_DAISY_OFF 0x408 |
| |
| static int pinctrl_scmi_imx_dt_node_to_map(struct pinctrl_dev *pctldev, |
| struct device_node *np, |
| struct pinctrl_map **map, |
| unsigned int *num_maps) |
| { |
| struct pinctrl_map *new_map; |
| const __be32 *list; |
| unsigned long *configs = NULL; |
| unsigned long cfg[IMX_SCMI_NUM_CFG]; |
| int map_num, size, pin_size, pin_id, num_pins; |
| int mux_reg, conf_reg, input_reg, mux_val, conf_val, input_val; |
| int i, j; |
| uint32_t ncfg; |
| static uint32_t daisy_off; |
| |
| if (!daisy_off) { |
| if (of_machine_is_compatible("fsl,imx95")) { |
| daisy_off = IMX95_DAISY_OFF; |
| } else { |
| dev_err(pctldev->dev, "platform not support scmi pinctrl\n"); |
| return -EINVAL; |
| } |
| } |
| |
| list = of_get_property(np, "fsl,pins", &size); |
| if (!list) { |
| dev_err(pctldev->dev, "no fsl,pins property in node %pOF\n", np); |
| return -EINVAL; |
| } |
| |
| pin_size = IMX_SCMI_PIN_SIZE; |
| |
| if (!size || size % pin_size) { |
| dev_err(pctldev->dev, "Invalid fsl,pins or pins property in node %pOF\n", np); |
| return -EINVAL; |
| } |
| |
| num_pins = size / pin_size; |
| map_num = num_pins; |
| |
| new_map = kmalloc_array(map_num, sizeof(struct pinctrl_map), |
| GFP_KERNEL); |
| if (!new_map) |
| return -ENOMEM; |
| |
| *map = new_map; |
| *num_maps = map_num; |
| |
| /* create config map */ |
| for (i = 0; i < num_pins; i++) { |
| j = 0; |
| ncfg = IMX_SCMI_NUM_CFG; |
| mux_reg = be32_to_cpu(*list++); |
| conf_reg = be32_to_cpu(*list++); |
| input_reg = be32_to_cpu(*list++); |
| mux_val = be32_to_cpu(*list++); |
| input_val = be32_to_cpu(*list++); |
| conf_val = be32_to_cpu(*list++); |
| if (conf_val & IMX_SCMI_PAD_SION) |
| mux_val |= IMX_SCMI_IOMUXC_CONFIG_SION; |
| |
| pin_id = mux_reg / 4; |
| |
| cfg[j++] = pinconf_to_config_packed(IMX_SCMI_PIN_MUX, mux_val); |
| |
| if (!conf_reg || (conf_val & IMX_SCMI_NO_PAD_CTL)) |
| ncfg--; |
| else |
| cfg[j++] = pinconf_to_config_packed(IMX_SCMI_PIN_CONFIG, conf_val); |
| |
| if (!input_reg) { |
| ncfg -= 2; |
| } else { |
| cfg[j++] = pinconf_to_config_packed(IMX_SCMI_PIN_DAISY_ID, |
| (input_reg - daisy_off) / 4); |
| cfg[j++] = pinconf_to_config_packed(IMX_SCMI_PIN_DAISY_CFG, input_val); |
| } |
| |
| configs = kmemdup_array(cfg, ncfg, sizeof(unsigned long), GFP_KERNEL); |
| |
| new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; |
| new_map[i].data.configs.group_or_pin = pin_get_name(pctldev, pin_id); |
| new_map[i].data.configs.configs = configs; |
| new_map[i].data.configs.num_configs = ncfg; |
| } |
| |
| return 0; |
| } |
| |
| static void pinctrl_scmi_imx_dt_free_map(struct pinctrl_dev *pctldev, |
| struct pinctrl_map *map, unsigned int num_maps) |
| { |
| kfree(map); |
| } |
| |
| static const struct pinctrl_ops pinctrl_scmi_imx_pinctrl_ops = { |
| .get_groups_count = pinctrl_generic_get_group_count, |
| .get_group_name = pinctrl_generic_get_group_name, |
| .get_group_pins = pinctrl_generic_get_group_pins, |
| .dt_node_to_map = pinctrl_scmi_imx_dt_node_to_map, |
| .dt_free_map = pinctrl_scmi_imx_dt_free_map, |
| }; |
| |
| static int pinctrl_scmi_imx_func_set_mux(struct pinctrl_dev *pctldev, |
| unsigned int selector, unsigned int group) |
| { |
| /* |
| * For i.MX SCMI PINCTRL , postpone the mux setting |
| * until config is set as they can be set together |
| * in one IPC call |
| */ |
| return 0; |
| } |
| |
| static const struct pinmux_ops pinctrl_scmi_imx_pinmux_ops = { |
| .get_functions_count = pinmux_generic_get_function_count, |
| .get_function_name = pinmux_generic_get_function_name, |
| .get_function_groups = pinmux_generic_get_function_groups, |
| .set_mux = pinctrl_scmi_imx_func_set_mux, |
| }; |
| |
| static int pinctrl_scmi_imx_pinconf_get(struct pinctrl_dev *pctldev, |
| unsigned int pin, unsigned long *config) |
| { |
| int ret; |
| struct scmi_pinctrl_imx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| u32 config_type, val; |
| |
| if (!config) |
| return -EINVAL; |
| |
| config_type = pinconf_to_config_param(*config); |
| |
| ret = pmx->ops->settings_get_one(pmx->ph, pin, PIN_TYPE, config_type, &val); |
| /* Convert SCMI error code to PINCTRL expected error code */ |
| if (ret == -EOPNOTSUPP) |
| return -ENOTSUPP; |
| if (ret) |
| return ret; |
| |
| *config = pinconf_to_config_packed(config_type, val); |
| |
| dev_dbg(pmx->dev, "pin:%s, conf:0x%x", pin_get_name(pctldev, pin), val); |
| |
| return 0; |
| } |
| |
| static int pinctrl_scmi_imx_pinconf_set(struct pinctrl_dev *pctldev, |
| unsigned int pin, |
| unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct scmi_pinctrl_imx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| enum scmi_pinctrl_conf_type config_type[IMX_SCMI_NUM_CFG]; |
| u32 config_value[IMX_SCMI_NUM_CFG]; |
| enum scmi_pinctrl_conf_type *p_config_type = config_type; |
| u32 *p_config_value = config_value; |
| int ret; |
| int i; |
| |
| if (!configs || !num_configs) |
| return -EINVAL; |
| |
| if (num_configs > IMX_SCMI_NUM_CFG) { |
| dev_err(pmx->dev, "num_configs(%d) too large\n", num_configs); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_configs; i++) { |
| /* cast to avoid build warning */ |
| p_config_type[i] = |
| (enum scmi_pinctrl_conf_type)pinconf_to_config_param(configs[i]); |
| p_config_value[i] = pinconf_to_config_argument(configs[i]); |
| |
| dev_dbg(pmx->dev, "pin: %u, type: %u, val: 0x%x\n", |
| pin, p_config_type[i], p_config_value[i]); |
| } |
| |
| ret = pmx->ops->settings_conf(pmx->ph, pin, PIN_TYPE, num_configs, |
| p_config_type, p_config_value); |
| if (ret) |
| dev_err(pmx->dev, "Error set config %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void pinctrl_scmi_imx_pinconf_dbg_show(struct pinctrl_dev *pctldev, |
| struct seq_file *s, unsigned int pin_id) |
| { |
| unsigned long config = pinconf_to_config_packed(IMX_SCMI_PIN_CONFIG, 0); |
| int ret; |
| |
| ret = pinctrl_scmi_imx_pinconf_get(pctldev, pin_id, &config); |
| if (ret) |
| config = 0; |
| else |
| config = pinconf_to_config_argument(config); |
| |
| seq_printf(s, "0x%lx", config); |
| } |
| |
| static const struct pinconf_ops pinctrl_scmi_imx_pinconf_ops = { |
| .pin_config_get = pinctrl_scmi_imx_pinconf_get, |
| .pin_config_set = pinctrl_scmi_imx_pinconf_set, |
| .pin_config_dbg_show = pinctrl_scmi_imx_pinconf_dbg_show, |
| }; |
| |
| static int |
| scmi_pinctrl_imx_get_pins(struct scmi_pinctrl_imx *pmx, struct pinctrl_desc *desc) |
| { |
| struct pinctrl_pin_desc *pins; |
| unsigned int npins; |
| int ret, i; |
| |
| npins = pmx->ops->count_get(pmx->ph, PIN_TYPE); |
| pins = devm_kmalloc_array(pmx->dev, npins, sizeof(*pins), GFP_KERNEL); |
| if (!pins) |
| return -ENOMEM; |
| |
| for (i = 0; i < npins; i++) { |
| pins[i].number = i; |
| /* no need free name, firmware driver handles it */ |
| ret = pmx->ops->name_get(pmx->ph, i, PIN_TYPE, &pins[i].name); |
| if (ret) |
| return dev_err_probe(pmx->dev, ret, |
| "Can't get name for pin %d", i); |
| } |
| |
| desc->npins = npins; |
| desc->pins = pins; |
| dev_dbg(pmx->dev, "got pins %u", npins); |
| |
| return 0; |
| } |
| |
| static const char * const scmi_pinctrl_imx_allowlist[] = { |
| "fsl,imx95", |
| NULL |
| }; |
| |
| static int scmi_pinctrl_imx_probe(struct scmi_device *sdev) |
| { |
| struct device *dev = &sdev->dev; |
| const struct scmi_handle *handle = sdev->handle; |
| struct scmi_pinctrl_imx *pmx; |
| struct scmi_protocol_handle *ph; |
| const struct scmi_pinctrl_proto_ops *pinctrl_ops; |
| int ret; |
| |
| if (!handle) |
| return -EINVAL; |
| |
| if (!of_machine_compatible_match(scmi_pinctrl_imx_allowlist)) |
| return -ENODEV; |
| |
| pinctrl_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_PINCTRL, &ph); |
| if (IS_ERR(pinctrl_ops)) |
| return PTR_ERR(pinctrl_ops); |
| |
| pmx = devm_kzalloc(dev, sizeof(*pmx), GFP_KERNEL); |
| if (!pmx) |
| return -ENOMEM; |
| |
| pmx->ph = ph; |
| pmx->ops = pinctrl_ops; |
| |
| pmx->dev = dev; |
| pmx->pctl_desc.name = DRV_NAME; |
| pmx->pctl_desc.owner = THIS_MODULE; |
| pmx->pctl_desc.pctlops = &pinctrl_scmi_imx_pinctrl_ops; |
| pmx->pctl_desc.pmxops = &pinctrl_scmi_imx_pinmux_ops; |
| pmx->pctl_desc.confops = &pinctrl_scmi_imx_pinconf_ops; |
| |
| ret = scmi_pinctrl_imx_get_pins(pmx, &pmx->pctl_desc); |
| if (ret) |
| return ret; |
| |
| pmx->dev = &sdev->dev; |
| |
| ret = devm_pinctrl_register_and_init(dev, &pmx->pctl_desc, pmx, |
| &pmx->pctldev); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to register pinctrl\n"); |
| |
| return pinctrl_enable(pmx->pctldev); |
| } |
| |
| static const struct scmi_device_id scmi_id_table[] = { |
| { SCMI_PROTOCOL_PINCTRL, "pinctrl-imx" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(scmi, scmi_id_table); |
| |
| static struct scmi_driver scmi_pinctrl_imx_driver = { |
| .name = DRV_NAME, |
| .probe = scmi_pinctrl_imx_probe, |
| .id_table = scmi_id_table, |
| }; |
| module_scmi_driver(scmi_pinctrl_imx_driver); |
| |
| MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>"); |
| MODULE_DESCRIPTION("i.MX SCMI pin controller driver"); |
| MODULE_LICENSE("GPL"); |