| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Freescale i.MX7ULP LPSPI driver |
| // |
| // Copyright 2016 Freescale Semiconductor, Inc. |
| // Copyright 2018 NXP Semiconductors |
| |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma/imx-dma.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/spi_bitbang.h> |
| #include <linux/types.h> |
| |
| #define DRIVER_NAME "fsl_lpspi" |
| |
| #define FSL_LPSPI_RPM_TIMEOUT 50 /* 50ms */ |
| |
| /* The maximum bytes that edma can transfer once.*/ |
| #define FSL_LPSPI_MAX_EDMA_BYTES ((1 << 15) - 1) |
| |
| /* i.MX7ULP LPSPI registers */ |
| #define IMX7ULP_VERID 0x0 |
| #define IMX7ULP_PARAM 0x4 |
| #define IMX7ULP_CR 0x10 |
| #define IMX7ULP_SR 0x14 |
| #define IMX7ULP_IER 0x18 |
| #define IMX7ULP_DER 0x1c |
| #define IMX7ULP_CFGR0 0x20 |
| #define IMX7ULP_CFGR1 0x24 |
| #define IMX7ULP_DMR0 0x30 |
| #define IMX7ULP_DMR1 0x34 |
| #define IMX7ULP_CCR 0x40 |
| #define IMX7ULP_FCR 0x58 |
| #define IMX7ULP_FSR 0x5c |
| #define IMX7ULP_TCR 0x60 |
| #define IMX7ULP_TDR 0x64 |
| #define IMX7ULP_RSR 0x70 |
| #define IMX7ULP_RDR 0x74 |
| |
| /* General control register field define */ |
| #define CR_RRF BIT(9) |
| #define CR_RTF BIT(8) |
| #define CR_RST BIT(1) |
| #define CR_MEN BIT(0) |
| #define SR_MBF BIT(24) |
| #define SR_TCF BIT(10) |
| #define SR_FCF BIT(9) |
| #define SR_RDF BIT(1) |
| #define SR_TDF BIT(0) |
| #define IER_TCIE BIT(10) |
| #define IER_FCIE BIT(9) |
| #define IER_RDIE BIT(1) |
| #define IER_TDIE BIT(0) |
| #define DER_RDDE BIT(1) |
| #define DER_TDDE BIT(0) |
| #define CFGR1_PCSCFG BIT(27) |
| #define CFGR1_PINCFG (BIT(24)|BIT(25)) |
| #define CFGR1_PCSPOL BIT(8) |
| #define CFGR1_NOSTALL BIT(3) |
| #define CFGR1_HOST BIT(0) |
| #define FSR_TXCOUNT (0xFF) |
| #define RSR_RXEMPTY BIT(1) |
| #define TCR_CPOL BIT(31) |
| #define TCR_CPHA BIT(30) |
| #define TCR_CONT BIT(21) |
| #define TCR_CONTC BIT(20) |
| #define TCR_RXMSK BIT(19) |
| #define TCR_TXMSK BIT(18) |
| |
| struct fsl_lpspi_devtype_data { |
| u8 prescale_max; |
| }; |
| |
| struct lpspi_config { |
| u8 bpw; |
| u8 chip_select; |
| u8 prescale; |
| u16 mode; |
| u32 speed_hz; |
| u32 effective_speed_hz; |
| }; |
| |
| struct fsl_lpspi_data { |
| struct device *dev; |
| void __iomem *base; |
| unsigned long base_phys; |
| struct clk *clk_ipg; |
| struct clk *clk_per; |
| bool is_target; |
| bool is_only_cs1; |
| bool is_first_byte; |
| |
| void *rx_buf; |
| const void *tx_buf; |
| void (*tx)(struct fsl_lpspi_data *); |
| void (*rx)(struct fsl_lpspi_data *); |
| |
| u32 remain; |
| u8 watermark; |
| u8 txfifosize; |
| u8 rxfifosize; |
| |
| struct lpspi_config config; |
| struct completion xfer_done; |
| |
| bool target_aborted; |
| |
| /* DMA */ |
| bool usedma; |
| struct completion dma_rx_completion; |
| struct completion dma_tx_completion; |
| |
| const struct fsl_lpspi_devtype_data *devtype_data; |
| }; |
| |
| /* |
| * ERR051608 fixed or not: |
| * https://www.nxp.com/docs/en/errata/i.MX93_1P87f.pdf |
| */ |
| static struct fsl_lpspi_devtype_data imx93_lpspi_devtype_data = { |
| .prescale_max = 1, |
| }; |
| |
| static struct fsl_lpspi_devtype_data imx7ulp_lpspi_devtype_data = { |
| .prescale_max = 7, |
| }; |
| |
| static const struct of_device_id fsl_lpspi_dt_ids[] = { |
| { .compatible = "fsl,imx7ulp-spi", .data = &imx7ulp_lpspi_devtype_data,}, |
| { .compatible = "fsl,imx93-spi", .data = &imx93_lpspi_devtype_data,}, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_lpspi_dt_ids); |
| |
| #define LPSPI_BUF_RX(type) \ |
| static void fsl_lpspi_buf_rx_##type(struct fsl_lpspi_data *fsl_lpspi) \ |
| { \ |
| unsigned int val = readl(fsl_lpspi->base + IMX7ULP_RDR); \ |
| \ |
| if (fsl_lpspi->rx_buf) { \ |
| *(type *)fsl_lpspi->rx_buf = val; \ |
| fsl_lpspi->rx_buf += sizeof(type); \ |
| } \ |
| } |
| |
| #define LPSPI_BUF_TX(type) \ |
| static void fsl_lpspi_buf_tx_##type(struct fsl_lpspi_data *fsl_lpspi) \ |
| { \ |
| type val = 0; \ |
| \ |
| if (fsl_lpspi->tx_buf) { \ |
| val = *(type *)fsl_lpspi->tx_buf; \ |
| fsl_lpspi->tx_buf += sizeof(type); \ |
| } \ |
| \ |
| fsl_lpspi->remain -= sizeof(type); \ |
| writel(val, fsl_lpspi->base + IMX7ULP_TDR); \ |
| } |
| |
| LPSPI_BUF_RX(u8) |
| LPSPI_BUF_TX(u8) |
| LPSPI_BUF_RX(u16) |
| LPSPI_BUF_TX(u16) |
| LPSPI_BUF_RX(u32) |
| LPSPI_BUF_TX(u32) |
| |
| static void fsl_lpspi_intctrl(struct fsl_lpspi_data *fsl_lpspi, |
| unsigned int enable) |
| { |
| writel(enable, fsl_lpspi->base + IMX7ULP_IER); |
| } |
| |
| static int fsl_lpspi_bytes_per_word(const int bpw) |
| { |
| return DIV_ROUND_UP(bpw, BITS_PER_BYTE); |
| } |
| |
| static bool fsl_lpspi_can_dma(struct spi_controller *controller, |
| struct spi_device *spi, |
| struct spi_transfer *transfer) |
| { |
| unsigned int bytes_per_word; |
| |
| if (!controller->dma_rx) |
| return false; |
| |
| bytes_per_word = fsl_lpspi_bytes_per_word(transfer->bits_per_word); |
| |
| switch (bytes_per_word) { |
| case 1: |
| case 2: |
| case 4: |
| break; |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int lpspi_prepare_xfer_hardware(struct spi_controller *controller) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| int ret; |
| |
| ret = pm_runtime_resume_and_get(fsl_lpspi->dev); |
| if (ret < 0) { |
| dev_err(fsl_lpspi->dev, "failed to enable clock\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| |
| pm_runtime_mark_last_busy(fsl_lpspi->dev); |
| pm_runtime_put_autosuspend(fsl_lpspi->dev); |
| |
| return 0; |
| } |
| |
| static void fsl_lpspi_write_tx_fifo(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| u8 txfifo_cnt; |
| u32 temp; |
| |
| txfifo_cnt = readl(fsl_lpspi->base + IMX7ULP_FSR) & 0xff; |
| |
| while (txfifo_cnt < fsl_lpspi->txfifosize) { |
| if (!fsl_lpspi->remain) |
| break; |
| fsl_lpspi->tx(fsl_lpspi); |
| txfifo_cnt++; |
| } |
| |
| if (txfifo_cnt < fsl_lpspi->txfifosize) { |
| if (!fsl_lpspi->is_target) { |
| temp = readl(fsl_lpspi->base + IMX7ULP_TCR); |
| temp &= ~TCR_CONTC; |
| writel(temp, fsl_lpspi->base + IMX7ULP_TCR); |
| } |
| |
| fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE); |
| } else |
| fsl_lpspi_intctrl(fsl_lpspi, IER_TDIE); |
| } |
| |
| static void fsl_lpspi_read_rx_fifo(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| while (!(readl(fsl_lpspi->base + IMX7ULP_RSR) & RSR_RXEMPTY)) |
| fsl_lpspi->rx(fsl_lpspi); |
| } |
| |
| static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| u32 temp = 0; |
| |
| temp |= fsl_lpspi->config.bpw - 1; |
| temp |= (fsl_lpspi->config.mode & 0x3) << 30; |
| temp |= (fsl_lpspi->config.chip_select & 0x3) << 24; |
| if (!fsl_lpspi->is_target) { |
| temp |= fsl_lpspi->config.prescale << 27; |
| /* |
| * Set TCR_CONT will keep SS asserted after current transfer. |
| * For the first transfer, clear TCR_CONTC to assert SS. |
| * For subsequent transfer, set TCR_CONTC to keep SS asserted. |
| */ |
| if (!fsl_lpspi->usedma) { |
| temp |= TCR_CONT; |
| if (fsl_lpspi->is_first_byte) |
| temp &= ~TCR_CONTC; |
| else |
| temp |= TCR_CONTC; |
| } |
| } |
| writel(temp, fsl_lpspi->base + IMX7ULP_TCR); |
| |
| dev_dbg(fsl_lpspi->dev, "TCR=0x%x\n", temp); |
| } |
| |
| static void fsl_lpspi_set_watermark(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| u32 temp; |
| |
| if (!fsl_lpspi->usedma) |
| temp = fsl_lpspi->watermark >> 1 | |
| (fsl_lpspi->watermark >> 1) << 16; |
| else |
| temp = fsl_lpspi->watermark >> 1; |
| |
| writel(temp, fsl_lpspi->base + IMX7ULP_FCR); |
| |
| dev_dbg(fsl_lpspi->dev, "FCR=0x%x\n", temp); |
| } |
| |
| static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| struct lpspi_config config = fsl_lpspi->config; |
| unsigned int perclk_rate, div; |
| u8 prescale_max; |
| u8 prescale; |
| int scldiv; |
| |
| perclk_rate = clk_get_rate(fsl_lpspi->clk_per); |
| prescale_max = fsl_lpspi->devtype_data->prescale_max; |
| |
| if (!config.speed_hz) { |
| dev_err(fsl_lpspi->dev, |
| "error: the transmission speed provided is 0!\n"); |
| return -EINVAL; |
| } |
| |
| if (config.speed_hz > perclk_rate / 2) { |
| dev_err(fsl_lpspi->dev, |
| "per-clk should be at least two times of transfer speed"); |
| return -EINVAL; |
| } |
| |
| div = DIV_ROUND_UP(perclk_rate, config.speed_hz); |
| |
| for (prescale = 0; prescale <= prescale_max; prescale++) { |
| scldiv = div / (1 << prescale) - 2; |
| if (scldiv >= 0 && scldiv < 256) { |
| fsl_lpspi->config.prescale = prescale; |
| break; |
| } |
| } |
| |
| if (scldiv < 0 || scldiv >= 256) |
| return -EINVAL; |
| |
| writel(scldiv | (scldiv << 8) | ((scldiv >> 1) << 16), |
| fsl_lpspi->base + IMX7ULP_CCR); |
| |
| fsl_lpspi->config.effective_speed_hz = perclk_rate / (scldiv + 2) * |
| (1 << prescale); |
| |
| dev_dbg(fsl_lpspi->dev, "perclk=%u, speed=%u, prescale=%u, scldiv=%d\n", |
| perclk_rate, config.speed_hz, prescale, scldiv); |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_dma_configure(struct spi_controller *controller) |
| { |
| int ret; |
| enum dma_slave_buswidth buswidth; |
| struct dma_slave_config rx = {}, tx = {}; |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| |
| switch (fsl_lpspi_bytes_per_word(fsl_lpspi->config.bpw)) { |
| case 4: |
| buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| break; |
| case 2: |
| buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; |
| break; |
| case 1: |
| buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| tx.direction = DMA_MEM_TO_DEV; |
| tx.dst_addr = fsl_lpspi->base_phys + IMX7ULP_TDR; |
| tx.dst_addr_width = buswidth; |
| tx.dst_maxburst = 1; |
| ret = dmaengine_slave_config(controller->dma_tx, &tx); |
| if (ret) { |
| dev_err(fsl_lpspi->dev, "TX dma configuration failed with %d\n", |
| ret); |
| return ret; |
| } |
| |
| rx.direction = DMA_DEV_TO_MEM; |
| rx.src_addr = fsl_lpspi->base_phys + IMX7ULP_RDR; |
| rx.src_addr_width = buswidth; |
| rx.src_maxburst = 1; |
| ret = dmaengine_slave_config(controller->dma_rx, &rx); |
| if (ret) { |
| dev_err(fsl_lpspi->dev, "RX dma configuration failed with %d\n", |
| ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| u32 temp; |
| int ret; |
| |
| if (!fsl_lpspi->is_target) { |
| ret = fsl_lpspi_set_bitrate(fsl_lpspi); |
| if (ret) |
| return ret; |
| } |
| |
| fsl_lpspi_set_watermark(fsl_lpspi); |
| |
| if (!fsl_lpspi->is_target) |
| temp = CFGR1_HOST; |
| else |
| temp = CFGR1_PINCFG; |
| if (fsl_lpspi->config.mode & SPI_CS_HIGH) |
| temp |= CFGR1_PCSPOL; |
| writel(temp, fsl_lpspi->base + IMX7ULP_CFGR1); |
| |
| temp = readl(fsl_lpspi->base + IMX7ULP_CR); |
| temp |= CR_RRF | CR_RTF | CR_MEN; |
| writel(temp, fsl_lpspi->base + IMX7ULP_CR); |
| |
| temp = 0; |
| if (fsl_lpspi->usedma) |
| temp = DER_TDDE | DER_RDDE; |
| writel(temp, fsl_lpspi->base + IMX7ULP_DER); |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_setup_transfer(struct spi_controller *controller, |
| struct spi_device *spi, |
| struct spi_transfer *t) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(spi->controller); |
| |
| if (t == NULL) |
| return -EINVAL; |
| |
| fsl_lpspi->config.mode = spi->mode; |
| fsl_lpspi->config.bpw = t->bits_per_word; |
| fsl_lpspi->config.speed_hz = t->speed_hz; |
| if (fsl_lpspi->is_only_cs1) |
| fsl_lpspi->config.chip_select = 1; |
| else |
| fsl_lpspi->config.chip_select = spi_get_chipselect(spi, 0); |
| |
| if (!fsl_lpspi->config.speed_hz) |
| fsl_lpspi->config.speed_hz = spi->max_speed_hz; |
| if (!fsl_lpspi->config.bpw) |
| fsl_lpspi->config.bpw = spi->bits_per_word; |
| |
| /* Initialize the functions for transfer */ |
| if (fsl_lpspi->config.bpw <= 8) { |
| fsl_lpspi->rx = fsl_lpspi_buf_rx_u8; |
| fsl_lpspi->tx = fsl_lpspi_buf_tx_u8; |
| } else if (fsl_lpspi->config.bpw <= 16) { |
| fsl_lpspi->rx = fsl_lpspi_buf_rx_u16; |
| fsl_lpspi->tx = fsl_lpspi_buf_tx_u16; |
| } else { |
| fsl_lpspi->rx = fsl_lpspi_buf_rx_u32; |
| fsl_lpspi->tx = fsl_lpspi_buf_tx_u32; |
| } |
| |
| if (t->len <= fsl_lpspi->txfifosize) |
| fsl_lpspi->watermark = t->len; |
| else |
| fsl_lpspi->watermark = fsl_lpspi->txfifosize; |
| |
| if (fsl_lpspi_can_dma(controller, spi, t)) |
| fsl_lpspi->usedma = true; |
| else |
| fsl_lpspi->usedma = false; |
| |
| return fsl_lpspi_config(fsl_lpspi); |
| } |
| |
| static int fsl_lpspi_target_abort(struct spi_controller *controller) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| |
| fsl_lpspi->target_aborted = true; |
| if (!fsl_lpspi->usedma) |
| complete(&fsl_lpspi->xfer_done); |
| else { |
| complete(&fsl_lpspi->dma_tx_completion); |
| complete(&fsl_lpspi->dma_rx_completion); |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_wait_for_completion(struct spi_controller *controller) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| |
| if (fsl_lpspi->is_target) { |
| if (wait_for_completion_interruptible(&fsl_lpspi->xfer_done) || |
| fsl_lpspi->target_aborted) { |
| dev_dbg(fsl_lpspi->dev, "interrupted\n"); |
| return -EINTR; |
| } |
| } else { |
| if (!wait_for_completion_timeout(&fsl_lpspi->xfer_done, HZ)) { |
| dev_dbg(fsl_lpspi->dev, "wait for completion timeout\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_reset(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| u32 temp; |
| |
| if (!fsl_lpspi->usedma) { |
| /* Disable all interrupt */ |
| fsl_lpspi_intctrl(fsl_lpspi, 0); |
| } |
| |
| /* W1C for all flags in SR */ |
| temp = 0x3F << 8; |
| writel(temp, fsl_lpspi->base + IMX7ULP_SR); |
| |
| /* Clear FIFO and disable module */ |
| temp = CR_RRF | CR_RTF; |
| writel(temp, fsl_lpspi->base + IMX7ULP_CR); |
| |
| return 0; |
| } |
| |
| static void fsl_lpspi_dma_rx_callback(void *cookie) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = (struct fsl_lpspi_data *)cookie; |
| |
| complete(&fsl_lpspi->dma_rx_completion); |
| } |
| |
| static void fsl_lpspi_dma_tx_callback(void *cookie) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = (struct fsl_lpspi_data *)cookie; |
| |
| complete(&fsl_lpspi->dma_tx_completion); |
| } |
| |
| static int fsl_lpspi_calculate_timeout(struct fsl_lpspi_data *fsl_lpspi, |
| int size) |
| { |
| unsigned long timeout = 0; |
| |
| /* Time with actual data transfer and CS change delay related to HW */ |
| timeout = (8 + 4) * size / fsl_lpspi->config.speed_hz; |
| |
| /* Add extra second for scheduler related activities */ |
| timeout += 1; |
| |
| /* Double calculated timeout */ |
| return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC); |
| } |
| |
| static int fsl_lpspi_dma_transfer(struct spi_controller *controller, |
| struct fsl_lpspi_data *fsl_lpspi, |
| struct spi_transfer *transfer) |
| { |
| struct dma_async_tx_descriptor *desc_tx, *desc_rx; |
| unsigned long transfer_timeout; |
| unsigned long time_left; |
| struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; |
| int ret; |
| |
| ret = fsl_lpspi_dma_configure(controller); |
| if (ret) |
| return ret; |
| |
| desc_rx = dmaengine_prep_slave_sg(controller->dma_rx, |
| rx->sgl, rx->nents, DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!desc_rx) |
| return -EINVAL; |
| |
| desc_rx->callback = fsl_lpspi_dma_rx_callback; |
| desc_rx->callback_param = (void *)fsl_lpspi; |
| dmaengine_submit(desc_rx); |
| reinit_completion(&fsl_lpspi->dma_rx_completion); |
| dma_async_issue_pending(controller->dma_rx); |
| |
| desc_tx = dmaengine_prep_slave_sg(controller->dma_tx, |
| tx->sgl, tx->nents, DMA_MEM_TO_DEV, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!desc_tx) { |
| dmaengine_terminate_all(controller->dma_tx); |
| return -EINVAL; |
| } |
| |
| desc_tx->callback = fsl_lpspi_dma_tx_callback; |
| desc_tx->callback_param = (void *)fsl_lpspi; |
| dmaengine_submit(desc_tx); |
| reinit_completion(&fsl_lpspi->dma_tx_completion); |
| dma_async_issue_pending(controller->dma_tx); |
| |
| fsl_lpspi->target_aborted = false; |
| |
| if (!fsl_lpspi->is_target) { |
| transfer_timeout = fsl_lpspi_calculate_timeout(fsl_lpspi, |
| transfer->len); |
| |
| /* Wait eDMA to finish the data transfer.*/ |
| time_left = wait_for_completion_timeout(&fsl_lpspi->dma_tx_completion, |
| transfer_timeout); |
| if (!time_left) { |
| dev_err(fsl_lpspi->dev, "I/O Error in DMA TX\n"); |
| dmaengine_terminate_all(controller->dma_tx); |
| dmaengine_terminate_all(controller->dma_rx); |
| fsl_lpspi_reset(fsl_lpspi); |
| return -ETIMEDOUT; |
| } |
| |
| time_left = wait_for_completion_timeout(&fsl_lpspi->dma_rx_completion, |
| transfer_timeout); |
| if (!time_left) { |
| dev_err(fsl_lpspi->dev, "I/O Error in DMA RX\n"); |
| dmaengine_terminate_all(controller->dma_tx); |
| dmaengine_terminate_all(controller->dma_rx); |
| fsl_lpspi_reset(fsl_lpspi); |
| return -ETIMEDOUT; |
| } |
| } else { |
| if (wait_for_completion_interruptible(&fsl_lpspi->dma_tx_completion) || |
| fsl_lpspi->target_aborted) { |
| dev_dbg(fsl_lpspi->dev, |
| "I/O Error in DMA TX interrupted\n"); |
| dmaengine_terminate_all(controller->dma_tx); |
| dmaengine_terminate_all(controller->dma_rx); |
| fsl_lpspi_reset(fsl_lpspi); |
| return -EINTR; |
| } |
| |
| if (wait_for_completion_interruptible(&fsl_lpspi->dma_rx_completion) || |
| fsl_lpspi->target_aborted) { |
| dev_dbg(fsl_lpspi->dev, |
| "I/O Error in DMA RX interrupted\n"); |
| dmaengine_terminate_all(controller->dma_tx); |
| dmaengine_terminate_all(controller->dma_rx); |
| fsl_lpspi_reset(fsl_lpspi); |
| return -EINTR; |
| } |
| } |
| |
| fsl_lpspi_reset(fsl_lpspi); |
| |
| return 0; |
| } |
| |
| static void fsl_lpspi_dma_exit(struct spi_controller *controller) |
| { |
| if (controller->dma_rx) { |
| dma_release_channel(controller->dma_rx); |
| controller->dma_rx = NULL; |
| } |
| |
| if (controller->dma_tx) { |
| dma_release_channel(controller->dma_tx); |
| controller->dma_tx = NULL; |
| } |
| } |
| |
| static int fsl_lpspi_dma_init(struct device *dev, |
| struct fsl_lpspi_data *fsl_lpspi, |
| struct spi_controller *controller) |
| { |
| int ret; |
| |
| /* Prepare for TX DMA: */ |
| controller->dma_tx = dma_request_chan(dev, "tx"); |
| if (IS_ERR(controller->dma_tx)) { |
| ret = PTR_ERR(controller->dma_tx); |
| dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret); |
| controller->dma_tx = NULL; |
| goto err; |
| } |
| |
| /* Prepare for RX DMA: */ |
| controller->dma_rx = dma_request_chan(dev, "rx"); |
| if (IS_ERR(controller->dma_rx)) { |
| ret = PTR_ERR(controller->dma_rx); |
| dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret); |
| controller->dma_rx = NULL; |
| goto err; |
| } |
| |
| init_completion(&fsl_lpspi->dma_rx_completion); |
| init_completion(&fsl_lpspi->dma_tx_completion); |
| controller->can_dma = fsl_lpspi_can_dma; |
| controller->max_dma_len = FSL_LPSPI_MAX_EDMA_BYTES; |
| |
| return 0; |
| err: |
| fsl_lpspi_dma_exit(controller); |
| return ret; |
| } |
| |
| static int fsl_lpspi_pio_transfer(struct spi_controller *controller, |
| struct spi_transfer *t) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| int ret; |
| |
| fsl_lpspi->tx_buf = t->tx_buf; |
| fsl_lpspi->rx_buf = t->rx_buf; |
| fsl_lpspi->remain = t->len; |
| |
| reinit_completion(&fsl_lpspi->xfer_done); |
| fsl_lpspi->target_aborted = false; |
| |
| fsl_lpspi_write_tx_fifo(fsl_lpspi); |
| |
| ret = fsl_lpspi_wait_for_completion(controller); |
| if (ret) |
| return ret; |
| |
| fsl_lpspi_reset(fsl_lpspi); |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_transfer_one(struct spi_controller *controller, |
| struct spi_device *spi, |
| struct spi_transfer *t) |
| { |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| int ret; |
| |
| fsl_lpspi->is_first_byte = true; |
| ret = fsl_lpspi_setup_transfer(controller, spi, t); |
| if (ret < 0) |
| return ret; |
| |
| t->effective_speed_hz = fsl_lpspi->config.effective_speed_hz; |
| |
| fsl_lpspi_set_cmd(fsl_lpspi); |
| fsl_lpspi->is_first_byte = false; |
| |
| if (fsl_lpspi->usedma) |
| ret = fsl_lpspi_dma_transfer(controller, fsl_lpspi, t); |
| else |
| ret = fsl_lpspi_pio_transfer(controller, t); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id) |
| { |
| u32 temp_SR, temp_IER; |
| struct fsl_lpspi_data *fsl_lpspi = dev_id; |
| |
| temp_IER = readl(fsl_lpspi->base + IMX7ULP_IER); |
| fsl_lpspi_intctrl(fsl_lpspi, 0); |
| temp_SR = readl(fsl_lpspi->base + IMX7ULP_SR); |
| |
| fsl_lpspi_read_rx_fifo(fsl_lpspi); |
| |
| if ((temp_SR & SR_TDF) && (temp_IER & IER_TDIE)) { |
| fsl_lpspi_write_tx_fifo(fsl_lpspi); |
| return IRQ_HANDLED; |
| } |
| |
| if (temp_SR & SR_MBF || |
| readl(fsl_lpspi->base + IMX7ULP_FSR) & FSR_TXCOUNT) { |
| writel(SR_FCF, fsl_lpspi->base + IMX7ULP_SR); |
| fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE); |
| return IRQ_HANDLED; |
| } |
| |
| if (temp_SR & SR_FCF && (temp_IER & IER_FCIE)) { |
| writel(SR_FCF, fsl_lpspi->base + IMX7ULP_SR); |
| complete(&fsl_lpspi->xfer_done); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| #ifdef CONFIG_PM |
| static int fsl_lpspi_runtime_resume(struct device *dev) |
| { |
| struct spi_controller *controller = dev_get_drvdata(dev); |
| struct fsl_lpspi_data *fsl_lpspi; |
| int ret; |
| |
| fsl_lpspi = spi_controller_get_devdata(controller); |
| |
| ret = clk_prepare_enable(fsl_lpspi->clk_per); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(fsl_lpspi->clk_ipg); |
| if (ret) { |
| clk_disable_unprepare(fsl_lpspi->clk_per); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_runtime_suspend(struct device *dev) |
| { |
| struct spi_controller *controller = dev_get_drvdata(dev); |
| struct fsl_lpspi_data *fsl_lpspi; |
| |
| fsl_lpspi = spi_controller_get_devdata(controller); |
| |
| clk_disable_unprepare(fsl_lpspi->clk_per); |
| clk_disable_unprepare(fsl_lpspi->clk_ipg); |
| |
| return 0; |
| } |
| #endif |
| |
| static int fsl_lpspi_init_rpm(struct fsl_lpspi_data *fsl_lpspi) |
| { |
| struct device *dev = fsl_lpspi->dev; |
| |
| pm_runtime_enable(dev); |
| pm_runtime_set_autosuspend_delay(dev, FSL_LPSPI_RPM_TIMEOUT); |
| pm_runtime_use_autosuspend(dev); |
| |
| return 0; |
| } |
| |
| static int fsl_lpspi_probe(struct platform_device *pdev) |
| { |
| const struct fsl_lpspi_devtype_data *devtype_data; |
| struct fsl_lpspi_data *fsl_lpspi; |
| struct spi_controller *controller; |
| struct resource *res; |
| int ret, irq; |
| u32 num_cs; |
| u32 temp; |
| bool is_target; |
| |
| devtype_data = of_device_get_match_data(&pdev->dev); |
| if (!devtype_data) |
| return -ENODEV; |
| |
| is_target = of_property_read_bool((&pdev->dev)->of_node, "spi-slave"); |
| if (is_target) |
| controller = devm_spi_alloc_target(&pdev->dev, |
| sizeof(struct fsl_lpspi_data)); |
| else |
| controller = devm_spi_alloc_host(&pdev->dev, |
| sizeof(struct fsl_lpspi_data)); |
| |
| if (!controller) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, controller); |
| |
| fsl_lpspi = spi_controller_get_devdata(controller); |
| fsl_lpspi->dev = &pdev->dev; |
| fsl_lpspi->is_target = is_target; |
| fsl_lpspi->is_only_cs1 = of_property_read_bool((&pdev->dev)->of_node, |
| "fsl,spi-only-use-cs1-sel"); |
| fsl_lpspi->devtype_data = devtype_data; |
| |
| init_completion(&fsl_lpspi->xfer_done); |
| |
| fsl_lpspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
| if (IS_ERR(fsl_lpspi->base)) { |
| ret = PTR_ERR(fsl_lpspi->base); |
| return ret; |
| } |
| fsl_lpspi->base_phys = res->start; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| ret = irq; |
| return ret; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, fsl_lpspi_isr, IRQF_NO_AUTOEN, |
| dev_name(&pdev->dev), fsl_lpspi); |
| if (ret) { |
| dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret); |
| return ret; |
| } |
| |
| fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per"); |
| if (IS_ERR(fsl_lpspi->clk_per)) { |
| ret = PTR_ERR(fsl_lpspi->clk_per); |
| return ret; |
| } |
| |
| fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(fsl_lpspi->clk_ipg)) { |
| ret = PTR_ERR(fsl_lpspi->clk_ipg); |
| return ret; |
| } |
| |
| /* enable the clock */ |
| ret = fsl_lpspi_init_rpm(fsl_lpspi); |
| if (ret) |
| return ret; |
| |
| ret = pm_runtime_get_sync(fsl_lpspi->dev); |
| if (ret < 0) { |
| dev_err(fsl_lpspi->dev, "failed to enable clock\n"); |
| goto out_pm_get; |
| } |
| |
| temp = readl(fsl_lpspi->base + IMX7ULP_PARAM); |
| fsl_lpspi->txfifosize = 1 << (temp & 0x0f); |
| fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f); |
| if (of_property_read_u32((&pdev->dev)->of_node, "num-cs", |
| &num_cs)) { |
| if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx93-spi")) |
| num_cs = ((temp >> 16) & 0xf); |
| else |
| num_cs = 1; |
| } |
| |
| controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32); |
| controller->transfer_one = fsl_lpspi_transfer_one; |
| controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware; |
| controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware; |
| controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; |
| controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; |
| controller->dev.of_node = pdev->dev.of_node; |
| controller->bus_num = pdev->id; |
| controller->num_chipselect = num_cs; |
| controller->target_abort = fsl_lpspi_target_abort; |
| if (!fsl_lpspi->is_target) |
| controller->use_gpio_descriptors = true; |
| |
| ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller); |
| if (ret == -EPROBE_DEFER) |
| goto out_pm_get; |
| if (ret < 0) { |
| dev_warn(&pdev->dev, "dma setup error %d, use pio\n", ret); |
| enable_irq(irq); |
| } |
| |
| ret = devm_spi_register_controller(&pdev->dev, controller); |
| if (ret < 0) { |
| dev_err_probe(&pdev->dev, ret, "spi_register_controller error\n"); |
| goto free_dma; |
| } |
| |
| pm_runtime_mark_last_busy(fsl_lpspi->dev); |
| pm_runtime_put_autosuspend(fsl_lpspi->dev); |
| |
| return 0; |
| |
| free_dma: |
| fsl_lpspi_dma_exit(controller); |
| out_pm_get: |
| pm_runtime_dont_use_autosuspend(fsl_lpspi->dev); |
| pm_runtime_put_sync(fsl_lpspi->dev); |
| pm_runtime_disable(fsl_lpspi->dev); |
| |
| return ret; |
| } |
| |
| static void fsl_lpspi_remove(struct platform_device *pdev) |
| { |
| struct spi_controller *controller = platform_get_drvdata(pdev); |
| struct fsl_lpspi_data *fsl_lpspi = |
| spi_controller_get_devdata(controller); |
| |
| fsl_lpspi_dma_exit(controller); |
| |
| pm_runtime_dont_use_autosuspend(fsl_lpspi->dev); |
| pm_runtime_disable(fsl_lpspi->dev); |
| } |
| |
| static int fsl_lpspi_suspend(struct device *dev) |
| { |
| pinctrl_pm_select_sleep_state(dev); |
| return pm_runtime_force_suspend(dev); |
| } |
| |
| static int fsl_lpspi_resume(struct device *dev) |
| { |
| int ret; |
| |
| ret = pm_runtime_force_resume(dev); |
| if (ret) { |
| dev_err(dev, "Error in resume: %d\n", ret); |
| return ret; |
| } |
| |
| pinctrl_pm_select_default_state(dev); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops fsl_lpspi_pm_ops = { |
| SET_RUNTIME_PM_OPS(fsl_lpspi_runtime_suspend, |
| fsl_lpspi_runtime_resume, NULL) |
| SYSTEM_SLEEP_PM_OPS(fsl_lpspi_suspend, fsl_lpspi_resume) |
| }; |
| |
| static struct platform_driver fsl_lpspi_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = fsl_lpspi_dt_ids, |
| .pm = pm_ptr(&fsl_lpspi_pm_ops), |
| }, |
| .probe = fsl_lpspi_probe, |
| .remove = fsl_lpspi_remove, |
| }; |
| module_platform_driver(fsl_lpspi_driver); |
| |
| MODULE_DESCRIPTION("LPSPI Controller driver"); |
| MODULE_AUTHOR("Gao Pan <pandy.gao@nxp.com>"); |
| MODULE_LICENSE("GPL"); |