blob: 64c0cd1995aa066364170990f4a92c89ff947f0f [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
/*
* dwc3-imx8mp.c - NXP imx8mp Specific Glue layer
*
* Copyright (c) 2020 NXP.
*/
#include <linux/cleanup.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include "core.h"
/* USB wakeup registers */
#define USB_WAKEUP_CTRL 0x00
/* Global wakeup interrupt enable, also used to clear interrupt */
#define USB_WAKEUP_EN BIT(31)
/* Wakeup from connect or disconnect, only for superspeed */
#define USB_WAKEUP_SS_CONN BIT(5)
/* 0 select vbus_valid, 1 select sessvld */
#define USB_WAKEUP_VBUS_SRC_SESS_VAL BIT(4)
/* Enable signal for wake up from u3 state */
#define USB_WAKEUP_U3_EN BIT(3)
/* Enable signal for wake up from id change */
#define USB_WAKEUP_ID_EN BIT(2)
/* Enable signal for wake up from vbus change */
#define USB_WAKEUP_VBUS_EN BIT(1)
/* Enable signal for wake up from dp/dm change */
#define USB_WAKEUP_DPDM_EN BIT(0)
#define USB_WAKEUP_EN_MASK GENMASK(5, 0)
/* USB glue registers */
#define USB_CTRL0 0x00
#define USB_CTRL1 0x04
#define USB_CTRL0_PORTPWR_EN BIT(12) /* 1 - PPC enabled (default) */
#define USB_CTRL0_USB3_FIXED BIT(22) /* 1 - USB3 permanent attached */
#define USB_CTRL0_USB2_FIXED BIT(23) /* 1 - USB2 permanent attached */
#define USB_CTRL1_OC_POLARITY BIT(16) /* 0 - HIGH / 1 - LOW */
#define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */
struct dwc3_imx8mp {
struct device *dev;
struct platform_device *dwc3;
void __iomem *hsio_blk_base;
void __iomem *glue_base;
struct clk *hsio_clk;
struct clk *suspend_clk;
int irq;
bool pm_suspended;
bool wakeup_pending;
};
static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx)
{
struct device *dev = dwc3_imx->dev;
u32 value;
if (!dwc3_imx->glue_base)
return;
value = readl(dwc3_imx->glue_base + USB_CTRL0);
if (device_property_read_bool(dev, "fsl,permanently-attached"))
value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
else
value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
if (device_property_read_bool(dev, "fsl,disable-port-power-control"))
value &= ~(USB_CTRL0_PORTPWR_EN);
else
value |= USB_CTRL0_PORTPWR_EN;
writel(value, dwc3_imx->glue_base + USB_CTRL0);
value = readl(dwc3_imx->glue_base + USB_CTRL1);
if (device_property_read_bool(dev, "fsl,over-current-active-low"))
value |= USB_CTRL1_OC_POLARITY;
else
value &= ~USB_CTRL1_OC_POLARITY;
if (device_property_read_bool(dev, "fsl,power-active-low"))
value |= USB_CTRL1_PWR_POLARITY;
else
value &= ~USB_CTRL1_PWR_POLARITY;
writel(value, dwc3_imx->glue_base + USB_CTRL1);
}
static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx,
pm_message_t msg)
{
struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3);
u32 val;
if (!dwc3)
return;
val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci) {
val |= USB_WAKEUP_EN | USB_WAKEUP_DPDM_EN;
if (PMSG_IS_AUTO(msg))
val |= USB_WAKEUP_SS_CONN | USB_WAKEUP_U3_EN;
} else {
val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN |
USB_WAKEUP_VBUS_SRC_SESS_VAL;
}
writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
}
static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
{
u32 val;
val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK);
writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
}
static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
{
struct dwc3_imx8mp *dwc3_imx = _dwc3_imx;
struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
if (!dwc3_imx->pm_suspended)
return IRQ_HANDLED;
disable_irq_nosync(dwc3_imx->irq);
dwc3_imx->wakeup_pending = true;
if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci)
pm_runtime_resume(&dwc->xhci->dev);
else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
pm_runtime_get(dwc->dev);
return IRQ_HANDLED;
}
static int dwc3_imx8mp_set_software_node(struct device *dev)
{
struct property_entry props[3] = { 0 };
int prop_idx = 0;
props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk");
props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk");
return device_create_managed_software_node(dev, props, NULL);
}
static int dwc3_imx8mp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct dwc3_imx8mp *dwc3_imx;
struct resource *res;
int err, irq;
if (!node) {
dev_err(dev, "device node not found\n");
return -EINVAL;
}
dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL);
if (!dwc3_imx)
return -ENOMEM;
platform_set_drvdata(pdev, dwc3_imx);
dwc3_imx->dev = dev;
dwc3_imx->hsio_blk_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(dwc3_imx->hsio_blk_base))
return PTR_ERR(dwc3_imx->hsio_blk_base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res) {
dev_warn(dev, "Base address for glue layer missing. Continuing without, some features are missing though.");
} else {
dwc3_imx->glue_base = devm_ioremap_resource(dev, res);
if (IS_ERR(dwc3_imx->glue_base))
return PTR_ERR(dwc3_imx->glue_base);
}
dwc3_imx->hsio_clk = devm_clk_get_enabled(dev, "hsio");
if (IS_ERR(dwc3_imx->hsio_clk))
return dev_err_probe(dev, PTR_ERR(dwc3_imx->hsio_clk),
"Failed to get hsio clk\n");
dwc3_imx->suspend_clk = devm_clk_get_enabled(dev, "suspend");
if (IS_ERR(dwc3_imx->suspend_clk))
return dev_err_probe(dev, PTR_ERR(dwc3_imx->suspend_clk),
"Failed to get suspend clk\n");
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
dwc3_imx->irq = irq;
struct device_node *dwc3_np __free(device_node) = of_get_compatible_child(node,
"snps,dwc3");
if (!dwc3_np)
return dev_err_probe(dev, -ENODEV, "failed to find dwc3 core child\n");
imx8mp_configure_glue(dwc3_imx);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
err = pm_runtime_get_sync(dev);
if (err < 0)
goto disable_rpm;
err = dwc3_imx8mp_set_software_node(dev);
if (err) {
err = -ENODEV;
dev_err(dev, "failed to create software node\n");
goto disable_rpm;
}
err = of_platform_populate(node, NULL, NULL, dev);
if (err) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
goto disable_rpm;
}
dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
if (!dwc3_imx->dwc3) {
dev_err(dev, "failed to get dwc3 platform device\n");
err = -ENODEV;
goto depopulate;
}
err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
IRQF_ONESHOT, dev_name(dev), dwc3_imx);
if (err) {
dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
goto depopulate;
}
device_set_wakeup_capable(dev, true);
pm_runtime_put(dev);
return 0;
depopulate:
of_platform_depopulate(dev);
disable_rpm:
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
return err;
}
static void dwc3_imx8mp_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
pm_runtime_get_sync(dev);
of_platform_depopulate(dev);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
}
static int dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx, pm_message_t msg)
{
if (dwc3_imx->pm_suspended)
return 0;
/* Wakeup enable */
if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev))
dwc3_imx8mp_wakeup_enable(dwc3_imx, msg);
dwc3_imx->pm_suspended = true;
return 0;
}
static int dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx, pm_message_t msg)
{
struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
int ret = 0;
if (!dwc3_imx->pm_suspended)
return 0;
/* Wakeup disable */
dwc3_imx8mp_wakeup_disable(dwc3_imx);
dwc3_imx->pm_suspended = false;
/* Upon power loss any previous configuration is lost, restore it */
imx8mp_configure_glue(dwc3_imx);
if (dwc3_imx->wakeup_pending) {
dwc3_imx->wakeup_pending = false;
if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) {
pm_runtime_mark_last_busy(dwc->dev);
pm_runtime_put_autosuspend(dwc->dev);
} else {
/*
* Add wait for xhci switch from suspend
* clock to normal clock to detect connection.
*/
usleep_range(9000, 10000);
}
enable_irq(dwc3_imx->irq);
}
return ret;
}
static int dwc3_imx8mp_pm_suspend(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
int ret;
ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND);
if (device_may_wakeup(dwc3_imx->dev))
enable_irq_wake(dwc3_imx->irq);
else
clk_disable_unprepare(dwc3_imx->suspend_clk);
clk_disable_unprepare(dwc3_imx->hsio_clk);
dev_dbg(dev, "dwc3 imx8mp pm suspend.\n");
return ret;
}
static int dwc3_imx8mp_pm_resume(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
int ret;
if (device_may_wakeup(dwc3_imx->dev)) {
disable_irq_wake(dwc3_imx->irq);
} else {
ret = clk_prepare_enable(dwc3_imx->suspend_clk);
if (ret)
return ret;
}
ret = clk_prepare_enable(dwc3_imx->hsio_clk);
if (ret) {
clk_disable_unprepare(dwc3_imx->suspend_clk);
return ret;
}
ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME);
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
dev_dbg(dev, "dwc3 imx8mp pm resume.\n");
return ret;
}
static int dwc3_imx8mp_runtime_suspend(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n");
return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND);
}
static int dwc3_imx8mp_runtime_resume(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
dev_dbg(dev, "dwc3 imx8mp runtime resume.\n");
return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME);
}
static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = {
SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend, dwc3_imx8mp_pm_resume)
RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend, dwc3_imx8mp_runtime_resume,
NULL)
};
static const struct of_device_id dwc3_imx8mp_of_match[] = {
{ .compatible = "fsl,imx8mp-dwc3", },
{},
};
MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match);
static struct platform_driver dwc3_imx8mp_driver = {
.probe = dwc3_imx8mp_probe,
.remove_new = dwc3_imx8mp_remove,
.driver = {
.name = "imx8mp-dwc3",
.pm = pm_ptr(&dwc3_imx8mp_dev_pm_ops),
.of_match_table = dwc3_imx8mp_of_match,
},
};
module_platform_driver(dwc3_imx8mp_driver);
MODULE_ALIAS("platform:imx8mp-dwc3");
MODULE_AUTHOR("jun.li@nxp.com");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer");