| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/ethtool.h> |
| #include <linux/jiffies.h> |
| |
| #include "common.h" |
| #include "module_fw.h" |
| #include "cmis.h" |
| |
| /* For accessing the LPL field on page 9Fh, the allowable length extension is |
| * min(i, 15) byte octets where i specifies the allowable additional number of |
| * byte octets in a READ or a WRITE. |
| */ |
| u32 ethtool_cmis_get_max_lpl_size(u8 num_of_byte_octs) |
| { |
| return 8 * (1 + min_t(u8, num_of_byte_octs, 15)); |
| } |
| |
| /* For accessing the EPL field on page 9Fh, the allowable length extension is |
| * min(i, 255) byte octets where i specifies the allowable additional number of |
| * byte octets in a READ or a WRITE. |
| */ |
| u32 ethtool_cmis_get_max_epl_size(u8 num_of_byte_octs) |
| { |
| return 8 * (1 + min_t(u8, num_of_byte_octs, 255)); |
| } |
| |
| void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args, |
| enum ethtool_cmis_cdb_cmd_id cmd, u8 *lpl, |
| u8 lpl_len, u8 *epl, u16 epl_len, |
| u16 max_duration, u8 read_write_len_ext, |
| u16 msleep_pre_rpl, u8 rpl_exp_len, u8 flags) |
| { |
| args->req.id = cpu_to_be16(cmd); |
| args->req.lpl_len = lpl_len; |
| if (lpl) { |
| memcpy(args->req.payload, lpl, args->req.lpl_len); |
| args->read_write_len_ext = |
| ethtool_cmis_get_max_lpl_size(read_write_len_ext); |
| } |
| if (epl) { |
| args->req.epl_len = cpu_to_be16(epl_len); |
| args->req.epl = epl; |
| args->read_write_len_ext = |
| ethtool_cmis_get_max_epl_size(read_write_len_ext); |
| } |
| |
| args->max_duration = max_duration; |
| args->msleep_pre_rpl = msleep_pre_rpl; |
| args->rpl_exp_len = rpl_exp_len; |
| args->flags = flags; |
| args->err_msg = NULL; |
| } |
| |
| void ethtool_cmis_page_init(struct ethtool_module_eeprom *page_data, |
| u8 page, u32 offset, u32 length) |
| { |
| page_data->page = page; |
| page_data->offset = offset; |
| page_data->length = length; |
| page_data->i2c_address = ETHTOOL_CMIS_CDB_PAGE_I2C_ADDR; |
| } |
| |
| #define CMIS_REVISION_PAGE 0x00 |
| #define CMIS_REVISION_OFFSET 0x01 |
| |
| struct cmis_rev_rpl { |
| u8 rev; |
| }; |
| |
| static u8 cmis_rev_rpl_major(struct cmis_rev_rpl *rpl) |
| { |
| return rpl->rev >> 4; |
| } |
| |
| static int cmis_rev_major_get(struct net_device *dev, u8 *rev_major) |
| { |
| const struct ethtool_ops *ops = dev->ethtool_ops; |
| struct ethtool_module_eeprom page_data = {0}; |
| struct netlink_ext_ack extack = {}; |
| struct cmis_rev_rpl rpl = {}; |
| int err; |
| |
| ethtool_cmis_page_init(&page_data, CMIS_REVISION_PAGE, |
| CMIS_REVISION_OFFSET, sizeof(rpl)); |
| page_data.data = (u8 *)&rpl; |
| |
| err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); |
| if (err < 0) { |
| if (extack._msg) |
| netdev_err(dev, "%s\n", extack._msg); |
| return err; |
| } |
| |
| *rev_major = cmis_rev_rpl_major(&rpl); |
| |
| return 0; |
| } |
| |
| #define CMIS_CDB_ADVERTISEMENT_PAGE 0x01 |
| #define CMIS_CDB_ADVERTISEMENT_OFFSET 0xA3 |
| |
| /* Based on section 8.4.11 "CDB Messaging Support Advertisement" in CMIS |
| * standard revision 5.2. |
| */ |
| struct cmis_cdb_advert_rpl { |
| u8 inst_supported; |
| u8 read_write_len_ext; |
| u8 resv1; |
| u8 resv2; |
| }; |
| |
| static u8 cmis_cdb_advert_rpl_inst_supported(struct cmis_cdb_advert_rpl *rpl) |
| { |
| return rpl->inst_supported >> 6; |
| } |
| |
| static int cmis_cdb_advertisement_get(struct ethtool_cmis_cdb *cdb, |
| struct net_device *dev, |
| struct ethnl_module_fw_flash_ntf_params *ntf_params) |
| { |
| const struct ethtool_ops *ops = dev->ethtool_ops; |
| struct ethtool_module_eeprom page_data = {}; |
| struct cmis_cdb_advert_rpl rpl = {}; |
| struct netlink_ext_ack extack = {}; |
| int err; |
| |
| ethtool_cmis_page_init(&page_data, CMIS_CDB_ADVERTISEMENT_PAGE, |
| CMIS_CDB_ADVERTISEMENT_OFFSET, sizeof(rpl)); |
| page_data.data = (u8 *)&rpl; |
| |
| err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); |
| if (err < 0) { |
| if (extack._msg) |
| netdev_err(dev, "%s\n", extack._msg); |
| return err; |
| } |
| |
| if (!cmis_cdb_advert_rpl_inst_supported(&rpl)) { |
| ethnl_module_fw_flash_ntf_err(dev, ntf_params, |
| "CDB functionality is not supported", |
| NULL); |
| return -EOPNOTSUPP; |
| } |
| |
| cdb->read_write_len_ext = rpl.read_write_len_ext; |
| |
| return 0; |
| } |
| |
| #define CMIS_PASSWORD_ENTRY_PAGE 0x00 |
| #define CMIS_PASSWORD_ENTRY_OFFSET 0x7A |
| |
| struct cmis_password_entry_pl { |
| __be32 password; |
| }; |
| |
| /* See section 9.3.1 "CMD 0000h: Query Status" in CMIS standard revision 5.2. |
| * struct cmis_cdb_query_status_pl and struct cmis_cdb_query_status_rpl are |
| * structured layouts of the flat arrays, |
| * struct ethtool_cmis_cdb_request::payload and |
| * struct ethtool_cmis_cdb_rpl::payload respectively. |
| */ |
| struct cmis_cdb_query_status_pl { |
| u16 response_delay; |
| }; |
| |
| struct cmis_cdb_query_status_rpl { |
| u8 length; |
| u8 status; |
| }; |
| |
| static int |
| cmis_cdb_validate_password(struct ethtool_cmis_cdb *cdb, |
| struct net_device *dev, |
| const struct ethtool_module_fw_flash_params *params, |
| struct ethnl_module_fw_flash_ntf_params *ntf_params) |
| { |
| const struct ethtool_ops *ops = dev->ethtool_ops; |
| struct cmis_cdb_query_status_pl qs_pl = {0}; |
| struct ethtool_module_eeprom page_data = {}; |
| struct ethtool_cmis_cdb_cmd_args args = {}; |
| struct cmis_password_entry_pl pe_pl = {}; |
| struct cmis_cdb_query_status_rpl *rpl; |
| struct netlink_ext_ack extack = {}; |
| int err; |
| |
| ethtool_cmis_page_init(&page_data, CMIS_PASSWORD_ENTRY_PAGE, |
| CMIS_PASSWORD_ENTRY_OFFSET, sizeof(pe_pl)); |
| page_data.data = (u8 *)&pe_pl; |
| |
| pe_pl = *((struct cmis_password_entry_pl *)page_data.data); |
| pe_pl.password = params->password; |
| err = ops->set_module_eeprom_by_page(dev, &page_data, &extack); |
| if (err < 0) { |
| if (extack._msg) |
| netdev_err(dev, "%s\n", extack._msg); |
| return err; |
| } |
| |
| ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_QUERY_STATUS, |
| (u8 *)&qs_pl, sizeof(qs_pl), NULL, 0, 0, |
| cdb->read_write_len_ext, 1000, |
| sizeof(*rpl), |
| CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); |
| |
| err = ethtool_cmis_cdb_execute_cmd(dev, &args); |
| if (err < 0) { |
| ethnl_module_fw_flash_ntf_err(dev, ntf_params, |
| "Query Status command failed", |
| args.err_msg); |
| return err; |
| } |
| |
| rpl = (struct cmis_cdb_query_status_rpl *)args.req.payload; |
| if (!rpl->length || !rpl->status) { |
| ethnl_module_fw_flash_ntf_err(dev, ntf_params, |
| "Password was not accepted", |
| NULL); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* Some CDB commands asserts the CDB completion flag only from CMIS |
| * revision 5. Therefore, check the relevant validity flag only when |
| * the revision supports it. |
| */ |
| void ethtool_cmis_cdb_check_completion_flag(u8 cmis_rev, u8 *flags) |
| { |
| *flags |= cmis_rev >= 5 ? CDB_F_COMPLETION_VALID : 0; |
| } |
| |
| #define CMIS_CDB_MODULE_FEATURES_RESV_DATA 34 |
| |
| /* See section 9.4.1 "CMD 0040h: Module Features" in CMIS standard revision 5.2. |
| * struct cmis_cdb_module_features_rpl is structured layout of the flat |
| * array, ethtool_cmis_cdb_rpl::payload. |
| */ |
| struct cmis_cdb_module_features_rpl { |
| u8 resv1[CMIS_CDB_MODULE_FEATURES_RESV_DATA]; |
| __be16 max_completion_time; |
| }; |
| |
| static u16 |
| cmis_cdb_module_features_completion_time(struct cmis_cdb_module_features_rpl *rpl) |
| { |
| return be16_to_cpu(rpl->max_completion_time); |
| } |
| |
| static int cmis_cdb_module_features_get(struct ethtool_cmis_cdb *cdb, |
| struct net_device *dev, |
| struct ethnl_module_fw_flash_ntf_params *ntf_params) |
| { |
| struct ethtool_cmis_cdb_cmd_args args = {}; |
| struct cmis_cdb_module_features_rpl *rpl; |
| u8 flags = CDB_F_STATUS_VALID; |
| int err; |
| |
| ethtool_cmis_cdb_check_completion_flag(cdb->cmis_rev, &flags); |
| ethtool_cmis_cdb_compose_args(&args, |
| ETHTOOL_CMIS_CDB_CMD_MODULE_FEATURES, |
| NULL, 0, NULL, 0, 0, |
| cdb->read_write_len_ext, 1000, |
| sizeof(*rpl), flags); |
| |
| err = ethtool_cmis_cdb_execute_cmd(dev, &args); |
| if (err < 0) { |
| ethnl_module_fw_flash_ntf_err(dev, ntf_params, |
| "Module Features command failed", |
| args.err_msg); |
| return err; |
| } |
| |
| rpl = (struct cmis_cdb_module_features_rpl *)args.req.payload; |
| cdb->max_completion_time = |
| cmis_cdb_module_features_completion_time(rpl); |
| |
| return 0; |
| } |
| |
| struct ethtool_cmis_cdb * |
| ethtool_cmis_cdb_init(struct net_device *dev, |
| const struct ethtool_module_fw_flash_params *params, |
| struct ethnl_module_fw_flash_ntf_params *ntf_params) |
| { |
| struct ethtool_cmis_cdb *cdb; |
| int err; |
| |
| cdb = kzalloc(sizeof(*cdb), GFP_KERNEL); |
| if (!cdb) |
| return ERR_PTR(-ENOMEM); |
| |
| err = cmis_rev_major_get(dev, &cdb->cmis_rev); |
| if (err < 0) |
| goto err; |
| |
| if (cdb->cmis_rev < 4) { |
| ethnl_module_fw_flash_ntf_err(dev, ntf_params, |
| "CMIS revision doesn't support module firmware flashing", |
| NULL); |
| err = -EOPNOTSUPP; |
| goto err; |
| } |
| |
| err = cmis_cdb_advertisement_get(cdb, dev, ntf_params); |
| if (err < 0) |
| goto err; |
| |
| if (params->password_valid) { |
| err = cmis_cdb_validate_password(cdb, dev, params, ntf_params); |
| if (err < 0) |
| goto err; |
| } |
| |
| err = cmis_cdb_module_features_get(cdb, dev, ntf_params); |
| if (err < 0) |
| goto err; |
| |
| return cdb; |
| |
| err: |
| ethtool_cmis_cdb_fini(cdb); |
| return ERR_PTR(err); |
| } |
| |
| void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb) |
| { |
| kfree(cdb); |
| } |
| |
| static bool is_completed(u8 data) |
| { |
| return !!(data & 0x40); |
| } |
| |
| #define CMIS_CDB_STATUS_SUCCESS 0x01 |
| |
| static bool status_success(u8 data) |
| { |
| return data == CMIS_CDB_STATUS_SUCCESS; |
| } |
| |
| #define CMIS_CDB_STATUS_FAIL 0x40 |
| |
| static bool status_fail(u8 data) |
| { |
| return data & CMIS_CDB_STATUS_FAIL; |
| } |
| |
| struct cmis_wait_for_cond_rpl { |
| u8 state; |
| }; |
| |
| static int |
| ethtool_cmis_module_poll(struct net_device *dev, |
| struct cmis_wait_for_cond_rpl *rpl, u32 offset, |
| bool (*cond_success)(u8), bool (*cond_fail)(u8)) |
| { |
| const struct ethtool_ops *ops = dev->ethtool_ops; |
| struct ethtool_module_eeprom page_data = {0}; |
| struct netlink_ext_ack extack = {}; |
| int err; |
| |
| ethtool_cmis_page_init(&page_data, 0, offset, sizeof(rpl)); |
| page_data.data = (u8 *)rpl; |
| |
| err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); |
| if (err < 0) { |
| if (extack._msg) |
| netdev_err_once(dev, "%s\n", extack._msg); |
| return -EBUSY; |
| } |
| |
| if ((*cond_success)(rpl->state)) |
| return 0; |
| |
| if (*cond_fail && (*cond_fail)(rpl->state)) |
| return -EIO; |
| |
| return -EBUSY; |
| } |
| |
| int ethtool_cmis_wait_for_cond(struct net_device *dev, u8 flags, u8 flag, |
| u16 max_duration, u32 offset, |
| bool (*cond_success)(u8), bool (*cond_fail)(u8), |
| u8 *state) |
| { |
| struct cmis_wait_for_cond_rpl rpl = {}; |
| unsigned long end; |
| int err; |
| |
| if (!(flags & flag)) |
| return 0; |
| |
| if (max_duration == 0) |
| max_duration = U16_MAX; |
| |
| end = jiffies + msecs_to_jiffies(max_duration); |
| do { |
| err = ethtool_cmis_module_poll(dev, &rpl, offset, cond_success, |
| cond_fail); |
| if (err != -EBUSY) |
| goto out; |
| |
| msleep(20); |
| } while (time_before(jiffies, end)); |
| |
| err = ethtool_cmis_module_poll(dev, &rpl, offset, cond_success, |
| cond_fail); |
| if (err == -EBUSY) |
| err = -ETIMEDOUT; |
| |
| out: |
| *state = rpl.state; |
| return err; |
| } |
| |
| #define CMIS_CDB_COMPLETION_FLAG_OFFSET 0x08 |
| |
| static int cmis_cdb_wait_for_completion(struct net_device *dev, |
| struct ethtool_cmis_cdb_cmd_args *args) |
| { |
| u8 flag; |
| int err; |
| |
| /* Some vendors demand waiting time before checking completion flag |
| * in some CDB commands. |
| */ |
| msleep(args->msleep_pre_rpl); |
| |
| err = ethtool_cmis_wait_for_cond(dev, args->flags, |
| CDB_F_COMPLETION_VALID, |
| args->max_duration, |
| CMIS_CDB_COMPLETION_FLAG_OFFSET, |
| is_completed, NULL, &flag); |
| if (err < 0) |
| args->err_msg = "Completion Flag did not set on time"; |
| |
| return err; |
| } |
| |
| #define CMIS_CDB_STATUS_OFFSET 0x25 |
| |
| static void cmis_cdb_status_fail_msg_get(u8 status, char **err_msg) |
| { |
| switch (status) { |
| case 0b10000001: |
| *err_msg = "CDB Status is in progress: Busy capturing command"; |
| break; |
| case 0b10000010: |
| *err_msg = |
| "CDB Status is in progress: Busy checking/validating command"; |
| break; |
| case 0b10000011: |
| *err_msg = "CDB Status is in progress: Busy executing"; |
| break; |
| case 0b01000000: |
| *err_msg = "CDB status failed: no specific failure"; |
| break; |
| case 0b01000010: |
| *err_msg = |
| "CDB status failed: Parameter range error or parameter not supported"; |
| break; |
| case 0b01000101: |
| *err_msg = "CDB status failed: CdbChkCode error"; |
| break; |
| case 0b01000110: |
| *err_msg = "CDB status failed: Password error"; |
| break; |
| default: |
| *err_msg = "Unknown failure reason"; |
| } |
| }; |
| |
| static int cmis_cdb_wait_for_status(struct net_device *dev, |
| struct ethtool_cmis_cdb_cmd_args *args) |
| { |
| u8 status; |
| int err; |
| |
| /* Some vendors demand waiting time before checking status in some |
| * CDB commands. |
| */ |
| msleep(args->msleep_pre_rpl); |
| |
| err = ethtool_cmis_wait_for_cond(dev, args->flags, CDB_F_STATUS_VALID, |
| args->max_duration, |
| CMIS_CDB_STATUS_OFFSET, |
| status_success, status_fail, &status); |
| if (err < 0 && !args->err_msg) |
| cmis_cdb_status_fail_msg_get(status, &args->err_msg); |
| |
| return err; |
| } |
| |
| #define CMIS_CDB_REPLY_OFFSET 0x86 |
| |
| static int cmis_cdb_process_reply(struct net_device *dev, |
| struct ethtool_module_eeprom *page_data, |
| struct ethtool_cmis_cdb_cmd_args *args) |
| { |
| u8 rpl_hdr_len = sizeof(struct ethtool_cmis_cdb_rpl_hdr); |
| u8 rpl_exp_len = args->rpl_exp_len + rpl_hdr_len; |
| const struct ethtool_ops *ops = dev->ethtool_ops; |
| struct netlink_ext_ack extack = {}; |
| struct ethtool_cmis_cdb_rpl *rpl; |
| int err; |
| |
| if (!args->rpl_exp_len) |
| return 0; |
| |
| ethtool_cmis_page_init(page_data, ETHTOOL_CMIS_CDB_CMD_PAGE, |
| CMIS_CDB_REPLY_OFFSET, rpl_exp_len); |
| page_data->data = kmalloc(page_data->length, GFP_KERNEL); |
| if (!page_data->data) |
| return -ENOMEM; |
| |
| err = ops->get_module_eeprom_by_page(dev, page_data, &extack); |
| if (err < 0) { |
| if (extack._msg) |
| netdev_err(dev, "%s\n", extack._msg); |
| goto out; |
| } |
| |
| rpl = (struct ethtool_cmis_cdb_rpl *)page_data->data; |
| if ((args->rpl_exp_len > rpl->hdr.rpl_len + rpl_hdr_len) || |
| !rpl->hdr.rpl_chk_code) { |
| err = -EIO; |
| goto out; |
| } |
| |
| args->req.lpl_len = rpl->hdr.rpl_len; |
| memcpy(args->req.payload, rpl->payload, args->req.lpl_len); |
| |
| out: |
| kfree(page_data->data); |
| return err; |
| } |
| |
| static int |
| __ethtool_cmis_cdb_execute_cmd(struct net_device *dev, |
| struct ethtool_module_eeprom *page_data, |
| u8 page, u32 offset, u32 length, void *data) |
| { |
| const struct ethtool_ops *ops = dev->ethtool_ops; |
| struct netlink_ext_ack extack = {}; |
| int err; |
| |
| ethtool_cmis_page_init(page_data, page, offset, length); |
| page_data->data = kmemdup(data, page_data->length, GFP_KERNEL); |
| if (!page_data->data) |
| return -ENOMEM; |
| |
| err = ops->set_module_eeprom_by_page(dev, page_data, &extack); |
| if (err < 0) { |
| if (extack._msg) |
| netdev_err(dev, "%s\n", extack._msg); |
| } |
| |
| kfree(page_data->data); |
| return err; |
| } |
| |
| #define CMIS_CDB_EPL_PAGE_START 0xA0 |
| #define CMIS_CDB_EPL_PAGE_END 0xAF |
| #define CMIS_CDB_EPL_FW_BLOCK_OFFSET_START 128 |
| #define CMIS_CDB_EPL_FW_BLOCK_OFFSET_END 255 |
| |
| static int |
| ethtool_cmis_cdb_execute_epl_cmd(struct net_device *dev, |
| struct ethtool_cmis_cdb_cmd_args *args, |
| struct ethtool_module_eeprom *page_data) |
| { |
| u16 epl_len = be16_to_cpu(args->req.epl_len); |
| u32 bytes_written = 0; |
| u8 page; |
| int err; |
| |
| for (page = CMIS_CDB_EPL_PAGE_START; |
| page <= CMIS_CDB_EPL_PAGE_END && bytes_written < epl_len; page++) { |
| u16 offset = CMIS_CDB_EPL_FW_BLOCK_OFFSET_START; |
| |
| while (offset <= CMIS_CDB_EPL_FW_BLOCK_OFFSET_END && |
| bytes_written < epl_len) { |
| u32 bytes_left = epl_len - bytes_written; |
| u16 space_left, bytes_to_write; |
| |
| space_left = CMIS_CDB_EPL_FW_BLOCK_OFFSET_END - offset + 1; |
| bytes_to_write = min_t(u16, bytes_left, |
| min_t(u16, space_left, |
| args->read_write_len_ext)); |
| |
| err = __ethtool_cmis_cdb_execute_cmd(dev, page_data, |
| page, offset, |
| bytes_to_write, |
| args->req.epl + bytes_written); |
| if (err < 0) |
| return err; |
| |
| offset += bytes_to_write; |
| bytes_written += bytes_to_write; |
| } |
| } |
| return 0; |
| } |
| |
| static u8 cmis_cdb_calc_checksum(const void *data, size_t size) |
| { |
| const u8 *bytes = (const u8 *)data; |
| u8 checksum = 0; |
| |
| for (size_t i = 0; i < size; i++) |
| checksum += bytes[i]; |
| |
| return ~checksum; |
| } |
| |
| #define CMIS_CDB_CMD_ID_OFFSET 0x80 |
| |
| int ethtool_cmis_cdb_execute_cmd(struct net_device *dev, |
| struct ethtool_cmis_cdb_cmd_args *args) |
| { |
| struct ethtool_module_eeprom page_data = {}; |
| u32 offset; |
| int err; |
| |
| args->req.chk_code = |
| cmis_cdb_calc_checksum(&args->req, |
| offsetof(struct ethtool_cmis_cdb_request, |
| epl)); |
| |
| if (args->req.lpl_len > args->read_write_len_ext) { |
| args->err_msg = "LPL length is longer than CDB read write length extension allows"; |
| return -EINVAL; |
| } |
| |
| /* According to the CMIS standard, there are two options to trigger the |
| * CDB commands. The default option is triggering the command by writing |
| * the CMDID bytes. Therefore, the command will be split to 2 calls: |
| * First, with everything except the CMDID field and then the CMDID |
| * field. |
| */ |
| offset = CMIS_CDB_CMD_ID_OFFSET + |
| offsetof(struct ethtool_cmis_cdb_request, body); |
| err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, |
| ETHTOOL_CMIS_CDB_CMD_PAGE, offset, |
| sizeof(args->req.body), |
| &args->req.body); |
| if (err < 0) |
| return err; |
| |
| if (args->req.epl_len) { |
| err = ethtool_cmis_cdb_execute_epl_cmd(dev, args, &page_data); |
| if (err < 0) |
| return err; |
| } |
| |
| offset = CMIS_CDB_CMD_ID_OFFSET + |
| offsetof(struct ethtool_cmis_cdb_request, id); |
| err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, |
| ETHTOOL_CMIS_CDB_CMD_PAGE, offset, |
| sizeof(args->req.id), |
| &args->req.id); |
| if (err < 0) |
| return err; |
| |
| err = cmis_cdb_wait_for_completion(dev, args); |
| if (err < 0) |
| return err; |
| |
| err = cmis_cdb_wait_for_status(dev, args); |
| if (err < 0) |
| return err; |
| |
| return cmis_cdb_process_reply(dev, &page_data, args); |
| } |