| # SPDX-License-Identifier: GPL-2.0-only |
| config SND_SOC_INTEL_SST_TOPLEVEL |
| bool "Intel ASoC SST drivers" |
| default y |
| depends on X86 || COMPILE_TEST |
| select SND_SOC_INTEL_MACH |
| help |
| Intel ASoC SST Platform Drivers. If you have a Intel machine that |
| has an audio controller with a DSP and I2S or DMIC port, then |
| enable this option by saying Y |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about Intel SST drivers. |
| |
| if SND_SOC_INTEL_SST_TOPLEVEL |
| |
| config SND_SOC_INTEL_CATPT |
| tristate "Haswell and Broadwell" |
| depends on ACPI || COMPILE_TEST |
| depends on DMADEVICES && SND_DMA_SGBUF |
| select DW_DMAC_CORE |
| select SND_SOC_ACPI if ACPI |
| select WANT_DEV_COREDUMP |
| select SND_INTEL_DSP_CONFIG |
| help |
| Enable support for Intel(R) Haswell and Broadwell platforms |
| with I2S codec present. This is a recommended option. |
| Say Y or m if you have such device. |
| If unsure, say N. |
| |
| config SND_SOC_INTEL_HASWELL |
| tristate |
| select SND_SOC_INTEL_CATPT |
| |
| config SND_SST_ATOM_HIFI2_PLATFORM |
| tristate |
| select SND_SOC_COMPRESS |
| |
| config SND_SST_ATOM_HIFI2_PLATFORM_PCI |
| tristate "PCI HiFi2 (Merrifield) Platforms" |
| depends on X86 && PCI |
| select SND_SST_ATOM_HIFI2_PLATFORM |
| help |
| If you have a Intel Merrifield/Edison platform, then |
| enable this option by saying Y or m. Distros will typically not |
| enable this option: while Merrifield/Edison can run a mainline |
| kernel with limited functionality it will require a firmware file |
| which is not in the standard firmware tree |
| |
| config SND_SST_ATOM_HIFI2_PLATFORM_ACPI |
| tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms" |
| default ACPI |
| depends on X86 && ACPI && PCI |
| select SND_SST_ATOM_HIFI2_PLATFORM |
| select SND_SOC_ACPI_INTEL_MATCH |
| select SND_INTEL_DSP_CONFIG |
| select IOSF_MBI |
| help |
| If you have a Intel Baytrail or Cherrytrail platform with an I2S |
| codec, then enable this option by saying Y or m. This is a |
| recommended option |
| This option is mutually exclusive with the SOF support on |
| Baytrail/Cherrytrail. If you want to enable SOF on |
| Baytrail/Cherrytrail, you need to deselect this option first. |
| |
| endif ## SND_SOC_INTEL_SST_TOPLEVEL |
| |
| if SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL |
| |
| config SND_SOC_ACPI_INTEL_MATCH |
| tristate |
| select SND_SOC_ACPI if ACPI |
| select SND_SOC_ACPI_INTEL_SDCA_QUIRKS |
| # this option controls the compilation of ACPI matching tables and |
| # helpers and is not meant to be selected by the user. |
| |
| config SND_SOC_ACPI_INTEL_SDCA_QUIRKS |
| tristate |
| select SND_SOC_SDCA if ACPI |
| |
| endif ## SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL |
| |
| config SND_SOC_INTEL_KEEMBAY |
| tristate "Keembay Platforms" |
| depends on ARCH_KEEMBAY || COMPILE_TEST |
| depends on COMMON_CLK |
| select SND_DMAENGINE_PCM |
| select SND_SOC_GENERIC_DMAENGINE_PCM |
| help |
| If you have a Intel Keembay platform then enable this option |
| by saying Y or m. |
| |
| config SND_SOC_INTEL_AVS |
| tristate "Intel AVS driver" |
| depends on X86 || COMPILE_TEST |
| depends on PCI |
| depends on COMMON_CLK |
| select ACPI_NHLT if ACPI |
| select SND_SOC_ACPI if ACPI |
| select SND_SOC_TOPOLOGY |
| select SND_SOC_HDA |
| select SND_SOC_COMPRESS if DEBUG_FS |
| select SND_HDA_EXT_CORE |
| select SND_HDA_DSP_LOADER |
| select SND_INTEL_DSP_CONFIG |
| select WANT_DEV_COREDUMP |
| help |
| Enable support for Intel(R) cAVS 1.5 platforms with DSP |
| capabilities. This includes Skylake, Kabylake, Amberlake and |
| Apollolake. |
| |
| # Machine board drivers |
| source "sound/soc/intel/avs/boards/Kconfig" |
| |
| # ASoC codec drivers |
| source "sound/soc/intel/boards/Kconfig" |
