| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs | 
 |  * | 
 |  * http://www.active-semi.com/products/power-management-units/act88xx/ | 
 |  * | 
 |  * Copyright (C) 2013 Atmel Corporation | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/err.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regulator/driver.h> | 
 | #include <linux/regulator/act8865.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/power_supply.h> | 
 | #include <linux/regulator/of_regulator.h> | 
 | #include <linux/regmap.h> | 
 | #include <dt-bindings/regulator/active-semi,8865-regulator.h> | 
 |  | 
 | /* | 
 |  * ACT8600 Global Register Map. | 
 |  */ | 
 | #define ACT8600_SYS_MODE	0x00 | 
 | #define ACT8600_SYS_CTRL	0x01 | 
 | #define ACT8600_DCDC1_VSET	0x10 | 
 | #define ACT8600_DCDC1_CTRL	0x12 | 
 | #define ACT8600_DCDC2_VSET	0x20 | 
 | #define ACT8600_DCDC2_CTRL	0x22 | 
 | #define ACT8600_DCDC3_VSET	0x30 | 
 | #define ACT8600_DCDC3_CTRL	0x32 | 
 | #define ACT8600_SUDCDC4_VSET	0x40 | 
 | #define ACT8600_SUDCDC4_CTRL	0x41 | 
 | #define ACT8600_LDO5_VSET	0x50 | 
 | #define ACT8600_LDO5_CTRL	0x51 | 
 | #define ACT8600_LDO6_VSET	0x60 | 
 | #define ACT8600_LDO6_CTRL	0x61 | 
 | #define ACT8600_LDO7_VSET	0x70 | 
 | #define ACT8600_LDO7_CTRL	0x71 | 
 | #define ACT8600_LDO8_VSET	0x80 | 
 | #define ACT8600_LDO8_CTRL	0x81 | 
 | #define ACT8600_LDO910_CTRL	0x91 | 
 | #define ACT8600_APCH0		0xA1 | 
 | #define ACT8600_APCH1		0xA8 | 
 | #define ACT8600_APCH2		0xA9 | 
 | #define ACT8600_APCH_STAT	0xAA | 
 | #define ACT8600_OTG0		0xB0 | 
 | #define ACT8600_OTG1		0xB2 | 
 |  | 
 | /* | 
 |  * ACT8846 Global Register Map. | 
 |  */ | 
 | #define	ACT8846_SYS0		0x00 | 
 | #define	ACT8846_SYS1		0x01 | 
 | #define	ACT8846_REG1_VSET	0x10 | 
 | #define	ACT8846_REG1_CTRL	0x12 | 
 | #define	ACT8846_REG2_VSET0	0x20 | 
 | #define	ACT8846_REG2_VSET1	0x21 | 
 | #define	ACT8846_REG2_CTRL	0x22 | 
 | #define	ACT8846_REG3_VSET0	0x30 | 
 | #define	ACT8846_REG3_VSET1	0x31 | 
 | #define	ACT8846_REG3_CTRL	0x32 | 
 | #define	ACT8846_REG4_VSET0	0x40 | 
 | #define	ACT8846_REG4_VSET1	0x41 | 
 | #define	ACT8846_REG4_CTRL	0x42 | 
 | #define	ACT8846_REG5_VSET	0x50 | 
 | #define	ACT8846_REG5_CTRL	0x51 | 
 | #define	ACT8846_REG6_VSET	0x58 | 
 | #define	ACT8846_REG6_CTRL	0x59 | 
 | #define	ACT8846_REG7_VSET	0x60 | 
 | #define	ACT8846_REG7_CTRL	0x61 | 
 | #define	ACT8846_REG8_VSET	0x68 | 
 | #define	ACT8846_REG8_CTRL	0x69 | 
 | #define	ACT8846_REG9_VSET	0x70 | 
 | #define	ACT8846_REG9_CTRL	0x71 | 
 | #define	ACT8846_REG10_VSET	0x80 | 
 | #define	ACT8846_REG10_CTRL	0x81 | 
 | #define	ACT8846_REG11_VSET	0x90 | 
 | #define	ACT8846_REG11_CTRL	0x91 | 
 | #define	ACT8846_REG12_VSET	0xa0 | 
 | #define	ACT8846_REG12_CTRL	0xa1 | 
 | #define	ACT8846_REG13_CTRL	0xb1 | 
 | #define	ACT8846_GLB_OFF_CTRL	0xc3 | 
 | #define	ACT8846_OFF_SYSMASK	0x18 | 
 |  | 
 | /* | 
 |  * ACT8865 Global Register Map. | 
 |  */ | 
 | #define	ACT8865_SYS_MODE	0x00 | 
 | #define	ACT8865_SYS_CTRL	0x01 | 
 | #define	ACT8865_SYS_UNLK_REGS	0x0b | 
 | #define	ACT8865_DCDC1_VSET1	0x20 | 
 | #define	ACT8865_DCDC1_VSET2	0x21 | 
 | #define	ACT8865_DCDC1_CTRL	0x22 | 
 | #define	ACT8865_DCDC1_SUS	0x24 | 
 | #define	ACT8865_DCDC2_VSET1	0x30 | 
 | #define	ACT8865_DCDC2_VSET2	0x31 | 
 | #define	ACT8865_DCDC2_CTRL	0x32 | 
 | #define	ACT8865_DCDC2_SUS	0x34 | 
 | #define	ACT8865_DCDC3_VSET1	0x40 | 
 | #define	ACT8865_DCDC3_VSET2	0x41 | 
 | #define	ACT8865_DCDC3_CTRL	0x42 | 
 | #define	ACT8865_DCDC3_SUS	0x44 | 
 | #define	ACT8865_LDO1_VSET	0x50 | 
 | #define	ACT8865_LDO1_CTRL	0x51 | 
 | #define	ACT8865_LDO1_SUS	0x52 | 
 | #define	ACT8865_LDO2_VSET	0x54 | 
 | #define	ACT8865_LDO2_CTRL	0x55 | 
 | #define	ACT8865_LDO2_SUS	0x56 | 
 | #define	ACT8865_LDO3_VSET	0x60 | 
 | #define	ACT8865_LDO3_CTRL	0x61 | 
 | #define	ACT8865_LDO3_SUS	0x62 | 
 | #define	ACT8865_LDO4_VSET	0x64 | 
 | #define	ACT8865_LDO4_CTRL	0x65 | 
 | #define	ACT8865_LDO4_SUS	0x66 | 
 | #define	ACT8865_MSTROFF		0x20 | 
 |  | 
 | /* | 
 |  * Field Definitions. | 
 |  */ | 
 | #define	ACT8865_ENA		0x80	/* ON - [7] */ | 
 | #define	ACT8865_DIS		0x40	/* DIS - [6] */ | 
 |  | 
 | #define	ACT8865_VSEL_MASK	0x3F	/* VSET - [5:0] */ | 
 |  | 
 |  | 
 | #define ACT8600_LDO10_ENA		0x40	/* ON - [6] */ | 
 | #define ACT8600_SUDCDC_VSEL_MASK	0xFF	/* SUDCDC VSET - [7:0] */ | 
 |  | 
 | #define ACT8600_APCH_CHG_ACIN		BIT(7) | 
 | #define ACT8600_APCH_CHG_USB		BIT(6) | 
 | #define ACT8600_APCH_CSTATE0		BIT(5) | 
 | #define ACT8600_APCH_CSTATE1		BIT(4) | 
 |  | 
 | /* | 
 |  * ACT8865 voltage number | 
 |  */ | 
 | #define	ACT8865_VOLTAGE_NUM	64 | 
 | #define ACT8600_SUDCDC_VOLTAGE_NUM	256 | 
 |  | 
 | struct act8865 { | 
 | 	struct regmap *regmap; | 
 | 	int off_reg; | 
 | 	int off_mask; | 
 | }; | 
 |  | 
 | static const struct regmap_range act8600_reg_ranges[] = { | 
 | 	regmap_reg_range(0x00, 0x01), | 
 | 	regmap_reg_range(0x10, 0x10), | 
 | 	regmap_reg_range(0x12, 0x12), | 
 | 	regmap_reg_range(0x20, 0x20), | 
 | 	regmap_reg_range(0x22, 0x22), | 
 | 	regmap_reg_range(0x30, 0x30), | 
 | 	regmap_reg_range(0x32, 0x32), | 
 | 	regmap_reg_range(0x40, 0x41), | 
 | 	regmap_reg_range(0x50, 0x51), | 
 | 	regmap_reg_range(0x60, 0x61), | 
 | 	regmap_reg_range(0x70, 0x71), | 
 | 	regmap_reg_range(0x80, 0x81), | 
 | 	regmap_reg_range(0x91, 0x91), | 
 | 	regmap_reg_range(0xA1, 0xA1), | 
 | 	regmap_reg_range(0xA8, 0xAA), | 
 | 	regmap_reg_range(0xB0, 0xB0), | 
 | 	regmap_reg_range(0xB2, 0xB2), | 
 | 	regmap_reg_range(0xC1, 0xC1), | 
 | }; | 
 |  | 
 | static const struct regmap_range act8600_reg_ro_ranges[] = { | 
 | 	regmap_reg_range(0xAA, 0xAA), | 
 | 	regmap_reg_range(0xC1, 0xC1), | 
 | }; | 
 |  | 
 | static const struct regmap_range act8600_reg_volatile_ranges[] = { | 
 | 	regmap_reg_range(0x00, 0x01), | 
 | 	regmap_reg_range(0x12, 0x12), | 
 | 	regmap_reg_range(0x22, 0x22), | 
 | 	regmap_reg_range(0x32, 0x32), | 
 | 	regmap_reg_range(0x41, 0x41), | 
 | 	regmap_reg_range(0x51, 0x51), | 
 | 	regmap_reg_range(0x61, 0x61), | 
 | 	regmap_reg_range(0x71, 0x71), | 
 | 	regmap_reg_range(0x81, 0x81), | 
 | 	regmap_reg_range(0xA8, 0xA8), | 
 | 	regmap_reg_range(0xAA, 0xAA), | 
 | 	regmap_reg_range(0xB0, 0xB0), | 
 | 	regmap_reg_range(0xC1, 0xC1), | 
 | }; | 
 |  | 
 | static const struct regmap_access_table act8600_write_ranges_table = { | 
 | 	.yes_ranges	= act8600_reg_ranges, | 
 | 	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_ranges), | 
 | 	.no_ranges	= act8600_reg_ro_ranges, | 
 | 	.n_no_ranges	= ARRAY_SIZE(act8600_reg_ro_ranges), | 
 | }; | 
 |  | 
 | static const struct regmap_access_table act8600_read_ranges_table = { | 
 | 	.yes_ranges	= act8600_reg_ranges, | 
 | 	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_ranges), | 
 | }; | 
 |  | 
 | static const struct regmap_access_table act8600_volatile_ranges_table = { | 
 | 	.yes_ranges	= act8600_reg_volatile_ranges, | 
 | 	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_volatile_ranges), | 
 | }; | 
 |  | 
 | static const struct regmap_config act8600_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | 	.max_register = 0xFF, | 
 | 	.wr_table = &act8600_write_ranges_table, | 
 | 	.rd_table = &act8600_read_ranges_table, | 
 | 	.volatile_table = &act8600_volatile_ranges_table, | 
 | }; | 
 |  | 
 | static const struct regmap_config act8865_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | }; | 
 |  | 
 | static const struct linear_range act8865_voltage_ranges[] = { | 
 | 	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), | 
 | 	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), | 
 | 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), | 
 | }; | 
 |  | 
 | static const struct linear_range act8600_sudcdc_voltage_ranges[] = { | 
 | 	REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0), | 
 | 	REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000), | 
 | 	REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000), | 
 | 	REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000), | 
 | 	REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0), | 
 | }; | 
 |  | 
 | static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable) | 
 | { | 
 | 	struct regmap *regmap = rdev->regmap; | 
 | 	int id = rdev->desc->id, reg, val; | 
 |  | 
 | 	switch (id) { | 
 | 	case ACT8865_ID_DCDC1: | 
 | 		reg = ACT8865_DCDC1_SUS; | 
 | 		val = 0xa8; | 
 | 		break; | 
 | 	case ACT8865_ID_DCDC2: | 
 | 		reg = ACT8865_DCDC2_SUS; | 
 | 		val = 0xa8; | 
 | 		break; | 
 | 	case ACT8865_ID_DCDC3: | 
 | 		reg = ACT8865_DCDC3_SUS; | 
 | 		val = 0xa8; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO1: | 
 | 		reg = ACT8865_LDO1_SUS; | 
 | 		val = 0xe8; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO2: | 
 | 		reg = ACT8865_LDO2_SUS; | 
 | 		val = 0xe8; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO3: | 
 | 		reg = ACT8865_LDO3_SUS; | 
 | 		val = 0xe8; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO4: | 
 | 		reg = ACT8865_LDO4_SUS; | 
 | 		val = 0xe8; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (enable) | 
 | 		val |= BIT(4); | 
 |  | 
 | 	/* | 
 | 	 * Ask the PMIC to enable/disable this output when entering hibernate | 
 | 	 * mode. | 
 | 	 */ | 
 | 	return regmap_write(regmap, reg, val); | 
 | } | 
 |  | 
 | static int act8865_set_suspend_enable(struct regulator_dev *rdev) | 
 | { | 
 | 	return act8865_set_suspend_state(rdev, true); | 
 | } | 
 |  | 
 | static int act8865_set_suspend_disable(struct regulator_dev *rdev) | 
 | { | 
 | 	return act8865_set_suspend_state(rdev, false); | 
 | } | 
 |  | 
 | static unsigned int act8865_of_map_mode(unsigned int mode) | 
 | { | 
 | 	switch (mode) { | 
 | 	case ACT8865_REGULATOR_MODE_FIXED: | 
 | 		return REGULATOR_MODE_FAST; | 
 | 	case ACT8865_REGULATOR_MODE_NORMAL: | 
 | 		return REGULATOR_MODE_NORMAL; | 
 | 	case ACT8865_REGULATOR_MODE_LOWPOWER: | 
 | 		return REGULATOR_MODE_STANDBY; | 
 | 	default: | 
 | 		return REGULATOR_MODE_INVALID; | 
 | 	} | 
 | } | 
 |  | 
 | static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode) | 
 | { | 
 | 	struct regmap *regmap = rdev->regmap; | 
 | 	int id = rdev_get_id(rdev); | 
 | 	int reg, val = 0; | 
 |  | 
 | 	switch (id) { | 
 | 	case ACT8865_ID_DCDC1: | 
 | 		reg = ACT8865_DCDC1_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_DCDC2: | 
 | 		reg = ACT8865_DCDC2_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_DCDC3: | 
 | 		reg = ACT8865_DCDC3_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO1: | 
 | 		reg = ACT8865_LDO1_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO2: | 
 | 		reg = ACT8865_LDO2_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO3: | 
 | 		reg = ACT8865_LDO3_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO4: | 
 | 		reg = ACT8865_LDO4_CTRL; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (mode) { | 
 | 	case REGULATOR_MODE_FAST: | 
 | 	case REGULATOR_MODE_NORMAL: | 
 | 		if (id <= ACT8865_ID_DCDC3) | 
 | 			val = BIT(5); | 
 | 		break; | 
 | 	case REGULATOR_MODE_STANDBY: | 
 | 		if (id > ACT8865_ID_DCDC3) | 
 | 			val = BIT(5); | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return regmap_update_bits(regmap, reg, BIT(5), val); | 
 | } | 
 |  | 
 | static unsigned int act8865_get_mode(struct regulator_dev *rdev) | 
 | { | 
 | 	struct regmap *regmap = rdev->regmap; | 
 | 	int id = rdev_get_id(rdev); | 
 | 	int reg, ret, val = 0; | 
 |  | 
 | 	switch (id) { | 
 | 	case ACT8865_ID_DCDC1: | 
 | 		reg = ACT8865_DCDC1_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_DCDC2: | 
 | 		reg = ACT8865_DCDC2_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_DCDC3: | 
 | 		reg = ACT8865_DCDC3_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO1: | 
 | 		reg = ACT8865_LDO1_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO2: | 
 | 		reg = ACT8865_LDO2_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO3: | 
 | 		reg = ACT8865_LDO3_CTRL; | 
 | 		break; | 
 | 	case ACT8865_ID_LDO4: | 
 | 		reg = ACT8865_LDO4_CTRL; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ret = regmap_read(regmap, reg, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (id <= ACT8865_ID_DCDC3 && (val & BIT(5))) | 
 | 		return REGULATOR_MODE_FAST; | 
 | 	else if	(id > ACT8865_ID_DCDC3 && !(val & BIT(5))) | 
 | 		return REGULATOR_MODE_NORMAL; | 
 | 	else | 
 | 		return REGULATOR_MODE_STANDBY; | 
 | } | 
 |  | 
 | static const struct regulator_ops act8865_ops = { | 
 | 	.list_voltage		= regulator_list_voltage_linear_range, | 
 | 	.map_voltage		= regulator_map_voltage_linear_range, | 
 | 	.get_voltage_sel	= regulator_get_voltage_sel_regmap, | 
 | 	.set_voltage_sel	= regulator_set_voltage_sel_regmap, | 
 | 	.enable			= regulator_enable_regmap, | 
 | 	.disable		= regulator_disable_regmap, | 
 | 	.set_mode		= act8865_set_mode, | 
 | 	.get_mode		= act8865_get_mode, | 
 | 	.is_enabled		= regulator_is_enabled_regmap, | 
 | 	.set_suspend_enable	= act8865_set_suspend_enable, | 
 | 	.set_suspend_disable	= act8865_set_suspend_disable, | 
 | }; | 
 |  | 
 | static const struct regulator_ops act8865_ldo_ops = { | 
 | 	.list_voltage		= regulator_list_voltage_linear_range, | 
 | 	.map_voltage		= regulator_map_voltage_linear_range, | 
 | 	.get_voltage_sel	= regulator_get_voltage_sel_regmap, | 
 | 	.set_voltage_sel	= regulator_set_voltage_sel_regmap, | 
 | 	.enable			= regulator_enable_regmap, | 
 | 	.disable		= regulator_disable_regmap, | 
 | 	.set_mode		= act8865_set_mode, | 
 | 	.get_mode		= act8865_get_mode, | 
 | 	.is_enabled		= regulator_is_enabled_regmap, | 
 | 	.set_suspend_enable	= act8865_set_suspend_enable, | 
 | 	.set_suspend_disable	= act8865_set_suspend_disable, | 
 | 	.set_pull_down		= regulator_set_pull_down_regmap, | 
 | }; | 
 |  | 
 | static const struct regulator_ops act8865_fixed_ldo_ops = { | 
 | 	.enable			= regulator_enable_regmap, | 
 | 	.disable		= regulator_disable_regmap, | 
 | 	.is_enabled		= regulator_is_enabled_regmap, | 
 | }; | 
 |  | 
 | #define ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, _ops)	\ | 
 | 	[_family##_ID_##_id] = {					\ | 
 | 		.name			= _name,			\ | 
 | 		.of_match		= of_match_ptr(_name),		\ | 
 | 		.of_map_mode		= act8865_of_map_mode,		\ | 
 | 		.regulators_node	= of_match_ptr("regulators"),	\ | 
 | 		.supply_name		= _supply,			\ | 
 | 		.id			= _family##_ID_##_id,		\ | 
 | 		.type			= REGULATOR_VOLTAGE,		\ | 
 | 		.ops			= _ops,				\ | 
 | 		.n_voltages		= ACT8865_VOLTAGE_NUM,		\ | 
 | 		.linear_ranges		= act8865_voltage_ranges,	\ | 
 | 		.n_linear_ranges	= ARRAY_SIZE(act8865_voltage_ranges), \ | 
 | 		.vsel_reg		= _family##_##_id##_##_vsel_reg, \ | 
 | 		.vsel_mask		= ACT8865_VSEL_MASK,		\ | 
 | 		.enable_reg		= _family##_##_id##_CTRL,	\ | 
 | 		.enable_mask		= ACT8865_ENA,			\ | 
 | 		.pull_down_reg		= _family##_##_id##_CTRL,	\ | 
 | 		.pull_down_mask		= ACT8865_DIS,			\ | 
 | 		.owner			= THIS_MODULE,			\ | 
 | 	} | 
 |  | 
 | #define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \ | 
 | 	ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ops) | 
 |  | 
 | #define ACT88xx_LDO(_name, _family, _id, _vsel_reg, _supply) \ | 
 | 	ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ldo_ops) | 
 |  | 
 | static const struct regulator_desc act8600_regulators[] = { | 
 | 	ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"), | 
 | 	ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"), | 
 | 	ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET, "vp3"), | 
 | 	{ | 
 | 		.name = "SUDCDC_REG4", | 
 | 		.of_match = of_match_ptr("SUDCDC_REG4"), | 
 | 		.regulators_node = of_match_ptr("regulators"), | 
 | 		.id = ACT8600_ID_SUDCDC4, | 
 | 		.ops = &act8865_ops, | 
 | 		.type = REGULATOR_VOLTAGE, | 
 | 		.n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM, | 
 | 		.linear_ranges = act8600_sudcdc_voltage_ranges, | 
 | 		.n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges), | 
 | 		.vsel_reg = ACT8600_SUDCDC4_VSET, | 
 | 		.vsel_mask = ACT8600_SUDCDC_VSEL_MASK, | 
 | 		.enable_reg = ACT8600_SUDCDC4_CTRL, | 
 | 		.enable_mask = ACT8865_ENA, | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | 	ACT88xx_REG("LDO5", ACT8600, LDO5, VSET, "inl"), | 
 | 	ACT88xx_REG("LDO6", ACT8600, LDO6, VSET, "inl"), | 
 | 	ACT88xx_REG("LDO7", ACT8600, LDO7, VSET, "inl"), | 
 | 	ACT88xx_REG("LDO8", ACT8600, LDO8, VSET, "inl"), | 
 | 	{ | 
 | 		.name = "LDO_REG9", | 
 | 		.of_match = of_match_ptr("LDO_REG9"), | 
 | 		.regulators_node = of_match_ptr("regulators"), | 
 | 		.id = ACT8600_ID_LDO9, | 
 | 		.ops = &act8865_fixed_ldo_ops, | 
 | 		.type = REGULATOR_VOLTAGE, | 
 | 		.n_voltages = 1, | 
 | 		.fixed_uV = 3300000, | 
 | 		.enable_reg = ACT8600_LDO910_CTRL, | 
 | 		.enable_mask = ACT8865_ENA, | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | 	{ | 
 | 		.name = "LDO_REG10", | 
 | 		.of_match = of_match_ptr("LDO_REG10"), | 
 | 		.regulators_node = of_match_ptr("regulators"), | 
 | 		.id = ACT8600_ID_LDO10, | 
 | 		.ops = &act8865_fixed_ldo_ops, | 
 | 		.type = REGULATOR_VOLTAGE, | 
 | 		.n_voltages = 1, | 
 | 		.fixed_uV = 1200000, | 
 | 		.enable_reg = ACT8600_LDO910_CTRL, | 
 | 		.enable_mask = ACT8600_LDO10_ENA, | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static const struct regulator_desc act8846_regulators[] = { | 
 | 	ACT88xx_REG("REG1", ACT8846, REG1, VSET, "vp1"), | 
 | 	ACT88xx_REG("REG2", ACT8846, REG2, VSET0, "vp2"), | 
 | 	ACT88xx_REG("REG3", ACT8846, REG3, VSET0, "vp3"), | 
 | 	ACT88xx_REG("REG4", ACT8846, REG4, VSET0, "vp4"), | 
 | 	ACT88xx_REG("REG5", ACT8846, REG5, VSET, "inl1"), | 
 | 	ACT88xx_REG("REG6", ACT8846, REG6, VSET, "inl1"), | 
 | 	ACT88xx_REG("REG7", ACT8846, REG7, VSET, "inl1"), | 
 | 	ACT88xx_REG("REG8", ACT8846, REG8, VSET, "inl2"), | 
 | 	ACT88xx_REG("REG9", ACT8846, REG9, VSET, "inl2"), | 
 | 	ACT88xx_REG("REG10", ACT8846, REG10, VSET, "inl3"), | 
 | 	ACT88xx_REG("REG11", ACT8846, REG11, VSET, "inl3"), | 
 | 	ACT88xx_REG("REG12", ACT8846, REG12, VSET, "inl3"), | 
 | }; | 
 |  | 
 | static const struct regulator_desc act8865_regulators[] = { | 
 | 	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"), | 
 | 	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"), | 
 | 	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"), | 
 | 	ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), | 
 | 	ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), | 
 | 	ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), | 
 | 	ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), | 
 | }; | 
 |  | 
 | static const struct regulator_desc act8865_alt_regulators[] = { | 
 | 	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"), | 
 | 	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"), | 
 | 	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"), | 
 | 	ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), | 
 | 	ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), | 
 | 	ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), | 
 | 	ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), | 
 | }; | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id act8865_dt_ids[] = { | 
 | 	{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 }, | 
 | 	{ .compatible = "active-semi,act8846", .data = (void *)ACT8846 }, | 
 | 	{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, act8865_dt_ids); | 
 | #endif | 
 |  | 
 | static struct act8865_regulator_data *act8865_get_regulator_data( | 
 | 		int id, struct act8865_platform_data *pdata) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < pdata->num_regulators; i++) { | 
 | 		if (pdata->regulators[i].id == id) | 
 | 			return &pdata->regulators[i]; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static struct i2c_client *act8865_i2c_client; | 
 | static void act8865_power_off(void) | 
 | { | 
 | 	struct act8865 *act8865; | 
 |  | 
 | 	act8865 = i2c_get_clientdata(act8865_i2c_client); | 
 | 	regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask); | 
 | 	while (1); | 
 | } | 
 |  | 
 | static int act8600_charger_get_status(struct regmap *map) | 
 | { | 
 | 	unsigned int val; | 
 | 	int ret; | 
 | 	u8 state0, state1; | 
 |  | 
 | 	ret = regmap_read(map, ACT8600_APCH_STAT, &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	state0 = val & ACT8600_APCH_CSTATE0; | 
 | 	state1 = val & ACT8600_APCH_CSTATE1; | 
 |  | 
 | 	if (state0 && !state1) | 
 | 		return POWER_SUPPLY_STATUS_CHARGING; | 
 | 	if (!state0 && state1) | 
 | 		return POWER_SUPPLY_STATUS_NOT_CHARGING; | 
 | 	if (!state0 && !state1) | 
 | 		return POWER_SUPPLY_STATUS_DISCHARGING; | 
 |  | 
 | 	return POWER_SUPPLY_STATUS_UNKNOWN; | 
 | } | 
 |  | 
 | static int act8600_charger_get_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, union power_supply_propval *val) | 
 | { | 
 | 	struct regmap *map = power_supply_get_drvdata(psy); | 
 | 	int ret; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_STATUS: | 
 | 		ret = act8600_charger_get_status(map); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		val->intval = ret; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static enum power_supply_property act8600_charger_properties[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | }; | 
 |  | 
 | static const struct power_supply_desc act8600_charger_desc = { | 
 | 	.name = "act8600-charger", | 
 | 	.type = POWER_SUPPLY_TYPE_BATTERY, | 
 | 	.properties = act8600_charger_properties, | 
 | 	.num_properties = ARRAY_SIZE(act8600_charger_properties), | 
 | 	.get_property = act8600_charger_get_property, | 
 | }; | 
 |  | 
 | static int act8600_charger_probe(struct device *dev, struct regmap *regmap) | 
 | { | 
 | 	struct power_supply *charger; | 
 | 	struct power_supply_config cfg = { | 
 | 		.drv_data = regmap, | 
 | 		.of_node = dev->of_node, | 
 | 	}; | 
 |  | 
 | 	charger = devm_power_supply_register(dev, &act8600_charger_desc, &cfg); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(charger); | 
 | } | 
 |  | 
 | static int act8865_pmic_probe(struct i2c_client *client) | 
 | { | 
 | 	const struct i2c_device_id *i2c_id = i2c_client_get_device_id(client); | 
 | 	const struct regulator_desc *regulators; | 
 | 	struct act8865_platform_data *pdata = NULL; | 
 | 	struct device *dev = &client->dev; | 
 | 	int i, ret, num_regulators; | 
 | 	struct act8865 *act8865; | 
 | 	const struct regmap_config *regmap_config; | 
 | 	unsigned long type; | 
 | 	int off_reg, off_mask; | 
 | 	int voltage_select = 0; | 
 |  | 
 | 	if (dev->of_node) { | 
 | 		const struct of_device_id *id; | 
 |  | 
 | 		id = of_match_device(of_match_ptr(act8865_dt_ids), dev); | 
 | 		if (!id) | 
 | 			return -ENODEV; | 
 |  | 
 | 		type = (unsigned long) id->data; | 
 |  | 
 | 		voltage_select = !!of_get_property(dev->of_node, | 
 | 						   "active-semi,vsel-high", | 
 | 						   NULL); | 
 | 	} else { | 
 | 		type = i2c_id->driver_data; | 
 | 		pdata = dev_get_platdata(dev); | 
 | 	} | 
 |  | 
 | 	switch (type) { | 
 | 	case ACT8600: | 
 | 		regulators = act8600_regulators; | 
 | 		num_regulators = ARRAY_SIZE(act8600_regulators); | 
 | 		regmap_config = &act8600_regmap_config; | 
 | 		off_reg = -1; | 
 | 		off_mask = -1; | 
 | 		break; | 
 | 	case ACT8846: | 
 | 		regulators = act8846_regulators; | 
 | 		num_regulators = ARRAY_SIZE(act8846_regulators); | 
 | 		regmap_config = &act8865_regmap_config; | 
 | 		off_reg = ACT8846_GLB_OFF_CTRL; | 
 | 		off_mask = ACT8846_OFF_SYSMASK; | 
 | 		break; | 
 | 	case ACT8865: | 
 | 		if (voltage_select) { | 
 | 			regulators = act8865_alt_regulators; | 
 | 			num_regulators = ARRAY_SIZE(act8865_alt_regulators); | 
 | 		} else { | 
 | 			regulators = act8865_regulators; | 
 | 			num_regulators = ARRAY_SIZE(act8865_regulators); | 
 | 		} | 
 | 		regmap_config = &act8865_regmap_config; | 
 | 		off_reg = ACT8865_SYS_CTRL; | 
 | 		off_mask = ACT8865_MSTROFF; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(dev, "invalid device id %lu\n", type); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL); | 
 | 	if (!act8865) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	act8865->regmap = devm_regmap_init_i2c(client, regmap_config); | 
 | 	if (IS_ERR(act8865->regmap)) { | 
 | 		ret = PTR_ERR(act8865->regmap); | 
 | 		dev_err(dev, "Failed to allocate register map: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (of_device_is_system_power_controller(dev->of_node)) { | 
 | 		if (!pm_power_off && (off_reg > 0)) { | 
 | 			act8865_i2c_client = client; | 
 | 			act8865->off_reg = off_reg; | 
 | 			act8865->off_mask = off_mask; | 
 | 			pm_power_off = act8865_power_off; | 
 | 		} else { | 
 | 			dev_err(dev, "Failed to set poweroff capability, already defined\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Finally register devices */ | 
 | 	for (i = 0; i < num_regulators; i++) { | 
 | 		const struct regulator_desc *desc = ®ulators[i]; | 
 | 		struct regulator_config config = { }; | 
 | 		struct regulator_dev *rdev; | 
 |  | 
 | 		config.dev = dev; | 
 | 		config.driver_data = act8865; | 
 | 		config.regmap = act8865->regmap; | 
 |  | 
 | 		if (pdata) { | 
 | 			struct act8865_regulator_data *rdata; | 
 |  | 
 | 			rdata = act8865_get_regulator_data(desc->id, pdata); | 
 | 			if (rdata) { | 
 | 				config.init_data = rdata->init_data; | 
 | 				config.of_node = rdata->of_node; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		rdev = devm_regulator_register(dev, desc, &config); | 
 | 		if (IS_ERR(rdev)) { | 
 | 			dev_err(dev, "failed to register %s\n", desc->name); | 
 | 			return PTR_ERR(rdev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (type == ACT8600) { | 
 | 		ret = act8600_charger_probe(dev, act8865->regmap); | 
 | 		if (ret < 0) { | 
 | 			if (ret != -EPROBE_DEFER) | 
 | 				dev_err(dev, "Failed to probe charger"); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(client, act8865); | 
 |  | 
 | 	/* Unlock expert registers for ACT8865. */ | 
 | 	return type != ACT8865 ? 0 : regmap_write(act8865->regmap, | 
 | 						  ACT8865_SYS_UNLK_REGS, 0xef); | 
 | } | 
 |  | 
 | static const struct i2c_device_id act8865_ids[] = { | 
 | 	{ .name = "act8600", .driver_data = ACT8600 }, | 
 | 	{ .name = "act8846", .driver_data = ACT8846 }, | 
 | 	{ .name = "act8865", .driver_data = ACT8865 }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, act8865_ids); | 
 |  | 
 | static struct i2c_driver act8865_pmic_driver = { | 
 | 	.driver	= { | 
 | 		.name	= "act8865", | 
 | 		.probe_type = PROBE_PREFER_ASYNCHRONOUS, | 
 | 	}, | 
 | 	.probe		= act8865_pmic_probe, | 
 | 	.id_table	= act8865_ids, | 
 | }; | 
 |  | 
 | module_i2c_driver(act8865_pmic_driver); | 
 |  | 
 | MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver"); | 
 | MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); | 
 | MODULE_LICENSE("GPL v2"); |