drivers/hwmon/axi-fan-control.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Fan Control HDL CORE driver
  *
  * Copyright 2019 Analog Devices Inc.
  */
 #include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/fpga/adi-axi-common.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>

 /* register map */
 #define ADI_REG_RSTN		0x0080
 #define ADI_REG_PWM_WIDTH	0x0084
 #define ADI_REG_TACH_PERIOD	0x0088
 #define ADI_REG_TACH_TOLERANCE	0x008c
 #define ADI_REG_PWM_PERIOD	0x00c0
 #define ADI_REG_TACH_MEASUR	0x00c4
 #define ADI_REG_TEMPERATURE	0x00c8
 #define ADI_REG_TEMP_00_H	0x0100
 #define ADI_REG_TEMP_25_L	0x0104
 #define ADI_REG_TEMP_25_H	0x0108
 #define ADI_REG_TEMP_50_L	0x010c
 #define ADI_REG_TEMP_50_H	0x0110
 #define ADI_REG_TEMP_75_L	0x0114
 #define ADI_REG_TEMP_75_H	0x0118
 #define ADI_REG_TEMP_100_L	0x011c

 #define ADI_REG_IRQ_MASK	0x0040
 #define ADI_REG_IRQ_PENDING	0x0044
 #define ADI_REG_IRQ_SRC		0x0048

 /* IRQ sources */
 #define ADI_IRQ_SRC_PWM_CHANGED		BIT(0)
 #define ADI_IRQ_SRC_TACH_ERR		BIT(1)
 #define ADI_IRQ_SRC_TEMP_INCREASE	BIT(2)
 #define ADI_IRQ_SRC_NEW_MEASUR		BIT(3)
 #define ADI_IRQ_SRC_MASK		GENMASK(3, 0)
 #define ADI_IRQ_MASK_OUT_ALL		0xFFFFFFFFU

 #define SYSFS_PWM_MAX			255

 struct axi_fan_control_data {
 	void __iomem *base;
 	struct device *hdev;
 	unsigned long clk_rate;
 	int irq;
 	/* pulses per revolution */
 	u32 ppr;
 	bool hw_pwm_req;
 	bool update_tacho_params;
 	u8 fan_fault;
 };

 static inline void axi_iowrite(const u32 val, const u32 reg,
 			       const struct axi_fan_control_data *ctl)
 {
 	iowrite32(val, ctl->base + reg);
 }

 static inline u32 axi_ioread(const u32 reg,
 			     const struct axi_fan_control_data *ctl)
 {
 	return ioread32(ctl->base + reg);
 }

 /*
  * The core calculates the temperature as:
  *	T = /raw * 509.3140064 / 65535) - 280.2308787
  */
 static ssize_t axi_fan_control_show(struct device *dev, struct device_attribute *da, char *buf)
 {
 	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	u32 temp = axi_ioread(attr->index, ctl);

 	temp = DIV_ROUND_CLOSEST_ULL(temp * 509314ULL, 65535) - 280230;

 	return sprintf(buf, "%u\n", temp);
 }

 static ssize_t axi_fan_control_store(struct device *dev, struct device_attribute *da,
 				     const char *buf, size_t count)
 {
 	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	u32 temp;
 	int ret;

 	ret = kstrtou32(buf, 10, &temp);
 	if (ret)
 		return ret;

 	temp = DIV_ROUND_CLOSEST_ULL((temp + 280230) * 65535ULL, 509314);
 	axi_iowrite(temp, attr->index, ctl);

 	return count;
 }

 static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
 {
 	u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
 	u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
 	/*
 	 * PWM_PERIOD is a RO register set by the core. It should never be 0.
 	 * For now we are trusting the HW...
 	 */
 	return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
 }

 static int axi_fan_control_set_pwm_duty(const long val,
 					struct axi_fan_control_data *ctl)
 {
 	u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
 	u32 new_width;
 	long __val = clamp_val(val, 0, SYSFS_PWM_MAX);

 	new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);

 	axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);

 	return 0;
 }

 static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
 {
 	const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);

 	if (tach == 0)
 		/* should we return error, EAGAIN maybe? */
 		return 0;
 	/*
 	 * The tacho period should be:
 	 *      TACH = 60/(ppr * rpm), where rpm is revolutions per second
 	 *      and ppr is pulses per revolution.
 	 * Given the tacho period, we can multiply it by the input clock
 	 * so that we know how many clocks we need to have this period.
 	 * From this, we can derive the RPM value.
 	 */
 	return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
 }

 static int axi_fan_control_read_temp(struct device *dev, u32 attr, long *val)
 {
 	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
 	long raw_temp;

 	switch (attr) {
 	case hwmon_temp_input:
 		raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
 		/*
 		 * The formula for the temperature is:
 		 *      T = (ADC * 501.3743 / 2^bits) - 273.6777
 		 * It's multiplied by 1000 to have millidegrees as
 		 * specified by the hwmon sysfs interface.
 		 */
 		*val = ((raw_temp * 501374) >> 16) - 273677;
 		return 0;
 	default:
 		return -ENOTSUPP;
 	}
 }

 static int axi_fan_control_read_fan(struct device *dev, u32 attr, long *val)
 {
 	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);

 	switch (attr) {
 	case hwmon_fan_fault:
 		*val = ctl->fan_fault;
 		/* clear it now */
 		ctl->fan_fault = 0;
 		return 0;
 	case hwmon_fan_input:
 		*val = axi_fan_control_get_fan_rpm(ctl);
 		return 0;
 	default:
 		return -ENOTSUPP;
 	}
 }

 static int axi_fan_control_read_pwm(struct device *dev, u32 attr, long *val)
 {
 	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);

 	switch (attr) {
 	case hwmon_pwm_input:
 		*val = axi_fan_control_get_pwm_duty(ctl);
 		return 0;
 	default:
 		return -ENOTSUPP;
 	}
 }

 static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
 {
 	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);

 	switch (attr) {
 	case hwmon_pwm_input:
 		return axi_fan_control_set_pwm_duty(val, ctl);
 	default:
 		return -ENOTSUPP;
 	}
 }

 static int axi_fan_control_read_labels(struct device *dev,
 				       enum hwmon_sensor_types type,
 				       u32 attr, int channel, const char **str)
 {
 	switch (type) {
 	case hwmon_fan:
 		*str = "FAN";
 		return 0;
 	case hwmon_temp:
 		*str = "SYSMON4";
 		return 0;
 	default:
 		return -ENOTSUPP;
 	}
 }

 static int axi_fan_control_read(struct device *dev,
 				enum hwmon_sensor_types type,
 				u32 attr, int channel, long *val)
 {
 	switch (type) {
 	case hwmon_fan:
 		return axi_fan_control_read_fan(dev, attr, val);
 	case hwmon_pwm:
 		return axi_fan_control_read_pwm(dev, attr, val);
 	case hwmon_temp:
 		return axi_fan_control_read_temp(dev, attr, val);
 	default:
 		return -ENOTSUPP;
 	}
 }

 static int axi_fan_control_write(struct device *dev,
 				 enum hwmon_sensor_types type,
 				 u32 attr, int channel, long val)
 {
 	switch (type) {
 	case hwmon_pwm:
 		return axi_fan_control_write_pwm(dev, attr, val);
 	default:
 		return -ENOTSUPP;
 	}
 }

 static umode_t axi_fan_control_fan_is_visible(const u32 attr)
 {
 	switch (attr) {
 	case hwmon_fan_input:
 	case hwmon_fan_fault:
 	case hwmon_fan_label:
 		return 0444;
 	default:
 		return 0;
 	}
 }

 static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
 {
 	switch (attr) {
 	case hwmon_pwm_input:
 		return 0644;
 	default:
 		return 0;
 	}
 }

 static umode_t axi_fan_control_temp_is_visible(const u32 attr)
 {
 	switch (attr) {
 	case hwmon_temp_input:
 	case hwmon_temp_label:
 		return 0444;
 	default:
 		return 0;
 	}
 }

 static umode_t axi_fan_control_is_visible(const void *data,
 					  enum hwmon_sensor_types type,
 					  u32 attr, int channel)
 {
 	switch (type) {
 	case hwmon_fan:
 		return axi_fan_control_fan_is_visible(attr);
 	case hwmon_pwm:
 		return axi_fan_control_pwm_is_visible(attr);
 	case hwmon_temp:
 		return axi_fan_control_temp_is_visible(attr);
 	default:
 		return 0;
 	}
 }

 /*
  * This core has two main ways of changing the PWM duty cycle. It is done,
  * either by a request from userspace (writing on pwm1_input) or by the
  * core itself. When the change is done by the core, it will use predefined
  * parameters to evaluate the tach signal and, on that case we cannot set them.
  * On the other hand, when the request is done by the user, with some arbitrary
  * value that the core does not now about, we have to provide the tach
  * parameters so that, the core can evaluate the signal. On the IRQ handler we
  * distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
  * us that the CORE requested a new duty cycle. After this, there is 5s delay
  * on which the core waits for the fan rotation speed to stabilize. After this
  * we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
  * the tach parameters or not on the next tach measurement cycle (corresponding
  * already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
  */
 static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
 {
 	struct axi_fan_control_data *ctl = (struct axi_fan_control_data *)data;
 	u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
 	u32 clear_mask;

 	if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
 		/* hardware requested a new pwm */
 		ctl->hw_pwm_req = true;

 	if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
 		/*
 		 * if the pwm changes on behalf of software,
 		 * we need to provide new tacho parameters to the core.
 		 * Wait for the next measurement for that...
 		 */
 		if (!ctl->hw_pwm_req) {
 			ctl->update_tacho_params = true;
 		} else {
 			ctl->hw_pwm_req = false;
 			hwmon_notify_event(ctl->hdev, hwmon_pwm,
 					   hwmon_pwm_input, 0);
 		}
 	}

 	if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
 		if (ctl->update_tacho_params) {
 			u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
 			/* get 25% tolerance */
 			u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);

 			/* set new tacho parameters */
 			axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
 			axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
 			ctl->update_tacho_params = false;
 		}
 	}

 	if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
 		ctl->fan_fault = 1;

 	/* clear all interrupts */
 	clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
 	axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);

 	return IRQ_HANDLED;
 }

 static int axi_fan_control_init(struct axi_fan_control_data *ctl,
 				const struct device_node *np)
 {
 	int ret;

 	/* get fan pulses per revolution */
 	ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
 	if (ret)
 		return ret;

 	/* 1, 2 and 4 are the typical and accepted values */
 	if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
 		return -EINVAL;
 	/*
 	 * Enable all IRQs
 	 */
 	axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
 		    ~(ADI_IRQ_SRC_NEW_MEASUR | ADI_IRQ_SRC_TACH_ERR |
 		      ADI_IRQ_SRC_PWM_CHANGED | ADI_IRQ_SRC_TEMP_INCREASE),
 		    ADI_REG_IRQ_MASK, ctl);

 	/* bring the device out of reset */
 	axi_iowrite(0x01, ADI_REG_RSTN, ctl);

 	return ret;
 }

 static const struct hwmon_channel_info * const axi_fan_control_info[] = {
 	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
 	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL),
 	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
 	NULL
 };

 static const struct hwmon_ops axi_fan_control_hwmon_ops = {
 	.is_visible = axi_fan_control_is_visible,
 	.read = axi_fan_control_read,
 	.write = axi_fan_control_write,
 	.read_string = axi_fan_control_read_labels,
 };

 static const struct hwmon_chip_info axi_chip_info = {
 	.ops = &axi_fan_control_hwmon_ops,
 	.info = axi_fan_control_info,
 };

 /* temperature threshold below which PWM should be 0% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp_hyst, axi_fan_control, ADI_REG_TEMP_00_H);
 /* temperature threshold above which PWM should be 25% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, axi_fan_control, ADI_REG_TEMP_25_L);
 /* temperature threshold below which PWM should be 25% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp_hyst, axi_fan_control, ADI_REG_TEMP_25_H);
 /* temperature threshold above which PWM should be 50% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, axi_fan_control, ADI_REG_TEMP_50_L);
 /* temperature threshold below which PWM should be 50% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp_hyst, axi_fan_control, ADI_REG_TEMP_50_H);
 /* temperature threshold above which PWM should be 75% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, axi_fan_control, ADI_REG_TEMP_75_L);
 /* temperature threshold below which PWM should be 75% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp_hyst, axi_fan_control, ADI_REG_TEMP_75_H);
 /* temperature threshold above which PWM should be 100% */
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, axi_fan_control, ADI_REG_TEMP_100_L);

 static struct attribute *axi_fan_control_attrs[] = {
 	&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(axi_fan_control);

 static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');

 static const struct of_device_id axi_fan_control_of_match[] = {
 	{ .compatible = "adi,axi-fan-control-1.00.a",
 		.data = (void *)&version_1_0_0},
 	{},
 };
 MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);

 static int axi_fan_control_probe(struct platform_device *pdev)
 {
 	struct axi_fan_control_data *ctl;
 	struct clk *clk;
 	const struct of_device_id *id;
 	const char *name = "axi_fan_control";
 	u32 version;
 	int ret;

 	id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
 	if (!id)
 		return -EINVAL;

 	ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
 	if (!ctl)
 		return -ENOMEM;

 	ctl->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ctl->base))
 		return PTR_ERR(ctl->base);

 	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
 		return PTR_ERR(clk);
 	}

 	ctl->clk_rate = clk_get_rate(clk);
 	if (!ctl->clk_rate)
 		return -EINVAL;

 	version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
 	if (ADI_AXI_PCORE_VER_MAJOR(version) !=
 	    ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data))) {
 		dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
 			ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data)),
 			ADI_AXI_PCORE_VER_MINOR((*(u32 *)id->data)),
 			ADI_AXI_PCORE_VER_PATCH((*(u32 *)id->data)),
 			ADI_AXI_PCORE_VER_MAJOR(version),
 			ADI_AXI_PCORE_VER_MINOR(version),
 			ADI_AXI_PCORE_VER_PATCH(version));
 		return -ENODEV;
 	}

 	ctl->irq = platform_get_irq(pdev, 0);
 	if (ctl->irq < 0)
 		return ctl->irq;

 	ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
 					axi_fan_control_irq_handler,
 					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
 					pdev->driver_override, ctl);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request an irq, %d", ret);
 		return ret;
 	}

 	ret = axi_fan_control_init(ctl, pdev->dev.of_node);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize device\n");
 		return ret;
 	}

 	ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
 							 name,
 							 ctl,
 							 &axi_chip_info,
 							 axi_fan_control_groups);

 	return PTR_ERR_OR_ZERO(ctl->hdev);
 }

 static struct platform_driver axi_fan_control_driver = {
 	.driver = {
 		.name = "axi_fan_control_driver",
 		.of_match_table = axi_fan_control_of_match,
 	},
 	.probe = axi_fan_control_probe,
 };
 module_platform_driver(axi_fan_control_driver);

 MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
 MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Fan Control HDL CORE driver
	*
	* Copyright 2019 Analog Devices Inc.
	*/
	#include <linux/bits.h>
	#include <linux/clk.h>
	#include <linux/fpga/adi-axi-common.h>
	#include <linux/hwmon.h>
	#include <linux/hwmon-sysfs.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>

	/* register map */
	#define ADI_REG_RSTN 0x0080
	#define ADI_REG_PWM_WIDTH 0x0084
	#define ADI_REG_TACH_PERIOD 0x0088
	#define ADI_REG_TACH_TOLERANCE 0x008c
	#define ADI_REG_PWM_PERIOD 0x00c0
	#define ADI_REG_TACH_MEASUR 0x00c4
	#define ADI_REG_TEMPERATURE 0x00c8
	#define ADI_REG_TEMP_00_H 0x0100
	#define ADI_REG_TEMP_25_L 0x0104
	#define ADI_REG_TEMP_25_H 0x0108
	#define ADI_REG_TEMP_50_L 0x010c
	#define ADI_REG_TEMP_50_H 0x0110
	#define ADI_REG_TEMP_75_L 0x0114
	#define ADI_REG_TEMP_75_H 0x0118
	#define ADI_REG_TEMP_100_L 0x011c

	#define ADI_REG_IRQ_MASK 0x0040
	#define ADI_REG_IRQ_PENDING 0x0044
	#define ADI_REG_IRQ_SRC 0x0048

	/* IRQ sources */
	#define ADI_IRQ_SRC_PWM_CHANGED BIT(0)
	#define ADI_IRQ_SRC_TACH_ERR BIT(1)
	#define ADI_IRQ_SRC_TEMP_INCREASE BIT(2)
	#define ADI_IRQ_SRC_NEW_MEASUR BIT(3)
	#define ADI_IRQ_SRC_MASK GENMASK(3, 0)
	#define ADI_IRQ_MASK_OUT_ALL 0xFFFFFFFFU

	#define SYSFS_PWM_MAX 255

	struct axi_fan_control_data {
	void __iomem *base;
	struct device *hdev;
	unsigned long clk_rate;
	int irq;
	/* pulses per revolution */
	u32 ppr;
	bool hw_pwm_req;
	bool update_tacho_params;
	u8 fan_fault;
	};

	static inline void axi_iowrite(const u32 val, const u32 reg,
	const struct axi_fan_control_data *ctl)
	{
	iowrite32(val, ctl->base + reg);
	}

	static inline u32 axi_ioread(const u32 reg,
	const struct axi_fan_control_data *ctl)
	{
	return ioread32(ctl->base + reg);
	}

	/*
	* The core calculates the temperature as:
	* T = /raw * 509.3140064 / 65535) - 280.2308787
	*/
	static ssize_t axi_fan_control_show(struct device dev, struct device_attribute da, char *buf)
	{
	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	u32 temp = axi_ioread(attr->index, ctl);

	temp = DIV_ROUND_CLOSEST_ULL(temp * 509314ULL, 65535) - 280230;

	return sprintf(buf, "%u\n", temp);
	}

	static ssize_t axi_fan_control_store(struct device dev, struct device_attribute da,
	const char *buf, size_t count)
	{
	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	u32 temp;
	int ret;

	ret = kstrtou32(buf, 10, &temp);
	if (ret)
	return ret;

	temp = DIV_ROUND_CLOSEST_ULL((temp + 280230) * 65535ULL, 509314);
	axi_iowrite(temp, attr->index, ctl);

	return count;
	}

	static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
	{
	u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
	u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
	/*
	* PWM_PERIOD is a RO register set by the core. It should never be 0.
	* For now we are trusting the HW...
	*/
	return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
	}

	static int axi_fan_control_set_pwm_duty(const long val,
	struct axi_fan_control_data *ctl)
	{
	u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
	u32 new_width;
	long __val = clamp_val(val, 0, SYSFS_PWM_MAX);

	new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);

	axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);

	return 0;
	}

	static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
	{
	const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);

	if (tach == 0)
	/* should we return error, EAGAIN maybe? */
	return 0;
	/*
	* The tacho period should be:
	* TACH = 60/(ppr * rpm), where rpm is revolutions per second
	* and ppr is pulses per revolution.
	* Given the tacho period, we can multiply it by the input clock
	* so that we know how many clocks we need to have this period.
	* From this, we can derive the RPM value.
	*/
	return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
	}

	static int axi_fan_control_read_temp(struct device dev, u32 attr, long val)
	{
	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
	long raw_temp;

	switch (attr) {
	case hwmon_temp_input:
	raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
	/*
	* The formula for the temperature is:
	* T = (ADC * 501.3743 / 2^bits) - 273.6777
	* It's multiplied by 1000 to have millidegrees as
	* specified by the hwmon sysfs interface.
	*/
	val = ((raw_temp 501374) >> 16) - 273677;
	return 0;
	default:
	return -ENOTSUPP;
	}
	}

	static int axi_fan_control_read_fan(struct device dev, u32 attr, long val)
	{
	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);

	switch (attr) {
	case hwmon_fan_fault:
	*val = ctl->fan_fault;
	/* clear it now */
	ctl->fan_fault = 0;
	return 0;
	case hwmon_fan_input:
	*val = axi_fan_control_get_fan_rpm(ctl);
	return 0;
	default:
	return -ENOTSUPP;
	}
	}

	static int axi_fan_control_read_pwm(struct device dev, u32 attr, long val)
	{
	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);

	switch (attr) {
	case hwmon_pwm_input:
	*val = axi_fan_control_get_pwm_duty(ctl);
	return 0;
	default:
	return -ENOTSUPP;
	}
	}

	static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
	{
	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);

	switch (attr) {
	case hwmon_pwm_input:
	return axi_fan_control_set_pwm_duty(val, ctl);
	default:
	return -ENOTSUPP;
	}
	}

	static int axi_fan_control_read_labels(struct device *dev,
	enum hwmon_sensor_types type,
	u32 attr, int channel, const char **str)
	{
	switch (type) {
	case hwmon_fan:
	*str = "FAN";
	return 0;
	case hwmon_temp:
	*str = "SYSMON4";
	return 0;
	default:
	return -ENOTSUPP;
	}
	}

	static int axi_fan_control_read(struct device *dev,
	enum hwmon_sensor_types type,
	u32 attr, int channel, long *val)
	{
	switch (type) {
	case hwmon_fan:
	return axi_fan_control_read_fan(dev, attr, val);
	case hwmon_pwm:
	return axi_fan_control_read_pwm(dev, attr, val);
	case hwmon_temp:
	return axi_fan_control_read_temp(dev, attr, val);
	default:
	return -ENOTSUPP;
	}
	}

	static int axi_fan_control_write(struct device *dev,
	enum hwmon_sensor_types type,
	u32 attr, int channel, long val)
	{
	switch (type) {
	case hwmon_pwm:
	return axi_fan_control_write_pwm(dev, attr, val);
	default:
	return -ENOTSUPP;
	}
	}

	static umode_t axi_fan_control_fan_is_visible(const u32 attr)
	{
	switch (attr) {
	case hwmon_fan_input:
	case hwmon_fan_fault:
	case hwmon_fan_label:
	return 0444;
	default:
	return 0;
	}
	}

	static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
	{
	switch (attr) {
	case hwmon_pwm_input:
	return 0644;
	default:
	return 0;
	}
	}

	static umode_t axi_fan_control_temp_is_visible(const u32 attr)
	{
	switch (attr) {
	case hwmon_temp_input:
	case hwmon_temp_label:
	return 0444;
	default:
	return 0;
	}
	}

	static umode_t axi_fan_control_is_visible(const void *data,
	enum hwmon_sensor_types type,
	u32 attr, int channel)
	{
	switch (type) {
	case hwmon_fan:
	return axi_fan_control_fan_is_visible(attr);
	case hwmon_pwm:
	return axi_fan_control_pwm_is_visible(attr);
	case hwmon_temp:
	return axi_fan_control_temp_is_visible(attr);
	default:
	return 0;
	}
	}

	/*
	* This core has two main ways of changing the PWM duty cycle. It is done,
	* either by a request from userspace (writing on pwm1_input) or by the
	* core itself. When the change is done by the core, it will use predefined
	* parameters to evaluate the tach signal and, on that case we cannot set them.
	* On the other hand, when the request is done by the user, with some arbitrary
	* value that the core does not now about, we have to provide the tach
	* parameters so that, the core can evaluate the signal. On the IRQ handler we
	* distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
	* us that the CORE requested a new duty cycle. After this, there is 5s delay
	* on which the core waits for the fan rotation speed to stabilize. After this
	* we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
	* the tach parameters or not on the next tach measurement cycle (corresponding
	* already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
	*/
	static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
	{
	struct axi_fan_control_data ctl = (struct axi_fan_control_data )data;
	u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
	u32 clear_mask;

	if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
	/* hardware requested a new pwm */
	ctl->hw_pwm_req = true;

	if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
	/*
	* if the pwm changes on behalf of software,
	* we need to provide new tacho parameters to the core.
	* Wait for the next measurement for that...
	*/
	if (!ctl->hw_pwm_req) {
	ctl->update_tacho_params = true;
	} else {
	ctl->hw_pwm_req = false;
	hwmon_notify_event(ctl->hdev, hwmon_pwm,
	hwmon_pwm_input, 0);
	}
	}

	if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
	if (ctl->update_tacho_params) {
	u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
	/* get 25% tolerance */
	u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);

	/* set new tacho parameters */
	axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
	axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
	ctl->update_tacho_params = false;
	}
	}

	if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
	ctl->fan_fault = 1;

	/* clear all interrupts */
	clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
	axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);

	return IRQ_HANDLED;
	}

	static int axi_fan_control_init(struct axi_fan_control_data *ctl,
	const struct device_node *np)
	{
	int ret;

	/* get fan pulses per revolution */
	ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
	if (ret)
	return ret;

	/* 1, 2 and 4 are the typical and accepted values */
	if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
	return -EINVAL;
	/*
	* Enable all IRQs
	*/
	axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
	~(ADI_IRQ_SRC_NEW_MEASUR \| ADI_IRQ_SRC_TACH_ERR \|
	ADI_IRQ_SRC_PWM_CHANGED \| ADI_IRQ_SRC_TEMP_INCREASE),
	ADI_REG_IRQ_MASK, ctl);

	/* bring the device out of reset */
	axi_iowrite(0x01, ADI_REG_RSTN, ctl);

	return ret;
	}

	static const struct hwmon_channel_info * const axi_fan_control_info[] = {
	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT \| HWMON_F_FAULT \| HWMON_F_LABEL),
	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT \| HWMON_T_LABEL),
	NULL
	};

	static const struct hwmon_ops axi_fan_control_hwmon_ops = {
	.is_visible = axi_fan_control_is_visible,
	.read = axi_fan_control_read,
	.write = axi_fan_control_write,
	.read_string = axi_fan_control_read_labels,
	};

	static const struct hwmon_chip_info axi_chip_info = {
	.ops = &axi_fan_control_hwmon_ops,
	.info = axi_fan_control_info,
	};

	/* temperature threshold below which PWM should be 0% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp_hyst, axi_fan_control, ADI_REG_TEMP_00_H);
	/* temperature threshold above which PWM should be 25% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, axi_fan_control, ADI_REG_TEMP_25_L);
	/* temperature threshold below which PWM should be 25% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp_hyst, axi_fan_control, ADI_REG_TEMP_25_H);
	/* temperature threshold above which PWM should be 50% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, axi_fan_control, ADI_REG_TEMP_50_L);
	/* temperature threshold below which PWM should be 50% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp_hyst, axi_fan_control, ADI_REG_TEMP_50_H);
	/* temperature threshold above which PWM should be 75% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, axi_fan_control, ADI_REG_TEMP_75_L);
	/* temperature threshold below which PWM should be 75% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp_hyst, axi_fan_control, ADI_REG_TEMP_75_H);
	/* temperature threshold above which PWM should be 100% */
	static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, axi_fan_control, ADI_REG_TEMP_100_L);

	static struct attribute *axi_fan_control_attrs[] = {
	&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
	NULL,
	};
	ATTRIBUTE_GROUPS(axi_fan_control);

	static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');

	static const struct of_device_id axi_fan_control_of_match[] = {
	{ .compatible = "adi,axi-fan-control-1.00.a",
	.data = (void *)&version_1_0_0},
	{},
	};
	MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);

	static int axi_fan_control_probe(struct platform_device *pdev)
	{
	struct axi_fan_control_data *ctl;
	struct clk *clk;
	const struct of_device_id *id;
	const char *name = "axi_fan_control";
	u32 version;
	int ret;

	id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
	if (!id)
	return -EINVAL;

	ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
	if (!ctl)
	return -ENOMEM;

	ctl->base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(ctl->base))
	return PTR_ERR(ctl->base);

	clk = devm_clk_get_enabled(&pdev->dev, NULL);
	if (IS_ERR(clk)) {
	dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
	return PTR_ERR(clk);
	}

	ctl->clk_rate = clk_get_rate(clk);
	if (!ctl->clk_rate)
	return -EINVAL;

	version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
	if (ADI_AXI_PCORE_VER_MAJOR(version) !=
	ADI_AXI_PCORE_VER_MAJOR(((u32 )id->data))) {
	dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
	ADI_AXI_PCORE_VER_MAJOR(((u32 )id->data)),
	ADI_AXI_PCORE_VER_MINOR(((u32 )id->data)),
	ADI_AXI_PCORE_VER_PATCH(((u32 )id->data)),
	ADI_AXI_PCORE_VER_MAJOR(version),
	ADI_AXI_PCORE_VER_MINOR(version),
	ADI_AXI_PCORE_VER_PATCH(version));
	return -ENODEV;
	}

	ctl->irq = platform_get_irq(pdev, 0);
	if (ctl->irq < 0)
	return ctl->irq;

	ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
	axi_fan_control_irq_handler,
	IRQF_ONESHOT \| IRQF_TRIGGER_HIGH,
	pdev->driver_override, ctl);
	if (ret) {
	dev_err(&pdev->dev, "failed to request an irq, %d", ret);
	return ret;
	}

	ret = axi_fan_control_init(ctl, pdev->dev.of_node);
	if (ret) {
	dev_err(&pdev->dev, "Failed to initialize device\n");
	return ret;
	}

	ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
	name,
	ctl,
	&axi_chip_info,
	axi_fan_control_groups);

	return PTR_ERR_OR_ZERO(ctl->hdev);
	}

	static struct platform_driver axi_fan_control_driver = {
	.driver = {
	.name = "axi_fan_control_driver",
	.of_match_table = axi_fan_control_of_match,
	},
	.probe = axi_fan_control_probe,
	};
	module_platform_driver(axi_fan_control_driver);

	MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
	MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
	MODULE_LICENSE("GPL");