| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Rockchip RK808/RK818 Core (I2C) driver |
| * |
| * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd |
| * Copyright (C) 2016 PHYTEC Messtechnik GmbH |
| * |
| * Author: Chris Zhong <zyw@rock-chips.com> |
| * Author: Zhang Qing <zhangqing@rock-chips.com> |
| * Author: Wadim Egorov <w.egorov@phytec.de> |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/mfd/rk808.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| |
| struct rk8xx_i2c_platform_data { |
| const struct regmap_config *regmap_cfg; |
| int variant; |
| }; |
| |
| static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| /* |
| * Notes: |
| * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but |
| * we don't use that feature. It's better to cache. |
| * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since |
| * bits are cleared in case when we shutoff anyway, but better safe. |
| */ |
| |
| switch (reg) { |
| case RK808_SECONDS_REG ... RK808_WEEKS_REG: |
| case RK808_RTC_STATUS_REG: |
| case RK808_VB_MON_REG: |
| case RK808_THERMAL_REG: |
| case RK808_DCDC_UV_STS_REG: |
| case RK808_LDO_UV_STS_REG: |
| case RK808_DCDC_PG_REG: |
| case RK808_LDO_PG_REG: |
| case RK808_DEVCTRL_REG: |
| case RK808_INT_STS_REG1: |
| case RK808_INT_STS_REG2: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| /* |
| * Notes: |
| * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but |
| * we don't use that feature. It's better to cache. |
| */ |
| |
| switch (reg) { |
| case RK817_SECONDS_REG ... RK817_WEEKS_REG: |
| case RK817_RTC_STATUS_REG: |
| case RK817_CODEC_DTOP_LPT_SRST: |
| case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0: |
| case RK817_PMIC_CHRG_STS: |
| case RK817_PMIC_CHRG_OUT: |
| case RK817_PMIC_CHRG_IN: |
| case RK817_INT_STS_REG0: |
| case RK817_INT_STS_REG1: |
| case RK817_INT_STS_REG2: |
| case RK817_SYS_STS: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| |
| static const struct regmap_config rk818_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK818_USB_CTRL_REG, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = rk808_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config rk805_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK805_OFF_SOURCE_REG, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = rk808_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config rk808_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK808_IO_POL_REG, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = rk808_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config rk817_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK817_GPIO_INT_CFG, |
| .cache_type = REGCACHE_NONE, |
| .volatile_reg = rk817_is_volatile_reg, |
| }; |
| |
| static const struct rk8xx_i2c_platform_data rk805_data = { |
| .regmap_cfg = &rk805_regmap_config, |
| .variant = RK805_ID, |
| }; |
| |
| static const struct rk8xx_i2c_platform_data rk808_data = { |
| .regmap_cfg = &rk808_regmap_config, |
| .variant = RK808_ID, |
| }; |
| |
| static const struct rk8xx_i2c_platform_data rk809_data = { |
| .regmap_cfg = &rk817_regmap_config, |
| .variant = RK809_ID, |
| }; |
| |
| static const struct rk8xx_i2c_platform_data rk817_data = { |
| .regmap_cfg = &rk817_regmap_config, |
| .variant = RK817_ID, |
| }; |
| |
| static const struct rk8xx_i2c_platform_data rk818_data = { |
| .regmap_cfg = &rk818_regmap_config, |
| .variant = RK818_ID, |
| }; |
| |
| static int rk8xx_i2c_probe(struct i2c_client *client) |
| { |
| const struct rk8xx_i2c_platform_data *data; |
| struct regmap *regmap; |
| |
| data = device_get_match_data(&client->dev); |
| if (!data) |
| return -ENODEV; |
| |
| regmap = devm_regmap_init_i2c(client, data->regmap_cfg); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(&client->dev, PTR_ERR(regmap), |
| "regmap initialization failed\n"); |
| |
| return rk8xx_probe(&client->dev, data->variant, client->irq, regmap); |
| } |
| |
| static void rk8xx_i2c_shutdown(struct i2c_client *client) |
| { |
| rk8xx_shutdown(&client->dev); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume); |
| |
| static const struct of_device_id rk8xx_i2c_of_match[] = { |
| { .compatible = "rockchip,rk805", .data = &rk805_data }, |
| { .compatible = "rockchip,rk808", .data = &rk808_data }, |
| { .compatible = "rockchip,rk809", .data = &rk809_data }, |
| { .compatible = "rockchip,rk817", .data = &rk817_data }, |
| { .compatible = "rockchip,rk818", .data = &rk818_data }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match); |
| |
| static struct i2c_driver rk8xx_i2c_driver = { |
| .driver = { |
| .name = "rk8xx-i2c", |
| .of_match_table = rk8xx_i2c_of_match, |
| .pm = &rk8xx_i2c_pm_ops, |
| }, |
| .probe = rk8xx_i2c_probe, |
| .shutdown = rk8xx_i2c_shutdown, |
| }; |
| module_i2c_driver(rk8xx_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); |
| MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>"); |
| MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>"); |
| MODULE_DESCRIPTION("RK8xx I2C PMIC driver"); |