| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2014,2015, Linaro Ltd. |
| * |
| * SAW power controller driver |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <soc/qcom/spm.h> |
| |
| #define SPM_CTL_INDEX 0x7f |
| #define SPM_CTL_INDEX_SHIFT 4 |
| #define SPM_CTL_EN BIT(0) |
| |
| enum spm_reg { |
| SPM_REG_CFG, |
| SPM_REG_SPM_CTL, |
| SPM_REG_DLY, |
| SPM_REG_PMIC_DLY, |
| SPM_REG_PMIC_DATA_0, |
| SPM_REG_PMIC_DATA_1, |
| SPM_REG_VCTL, |
| SPM_REG_SEQ_ENTRY, |
| SPM_REG_SPM_STS, |
| SPM_REG_PMIC_STS, |
| SPM_REG_AVS_CTL, |
| SPM_REG_AVS_LIMIT, |
| SPM_REG_NR, |
| }; |
| |
| static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = { |
| [SPM_REG_AVS_CTL] = 0x904, |
| [SPM_REG_AVS_LIMIT] = 0x908, |
| }; |
| |
| static const struct spm_reg_data spm_reg_660_gold_l2 = { |
| .reg_offset = spm_reg_offset_v4_1, |
| .avs_ctl = 0x1010031, |
| .avs_limit = 0x4580458, |
| }; |
| |
| static const struct spm_reg_data spm_reg_660_silver_l2 = { |
| .reg_offset = spm_reg_offset_v4_1, |
| .avs_ctl = 0x101c031, |
| .avs_limit = 0x4580458, |
| }; |
| |
| static const struct spm_reg_data spm_reg_8998_gold_l2 = { |
| .reg_offset = spm_reg_offset_v4_1, |
| .avs_ctl = 0x1010031, |
| .avs_limit = 0x4700470, |
| }; |
| |
| static const struct spm_reg_data spm_reg_8998_silver_l2 = { |
| .reg_offset = spm_reg_offset_v4_1, |
| .avs_ctl = 0x1010031, |
| .avs_limit = 0x4200420, |
| }; |
| |
| static const u16 spm_reg_offset_v3_0[SPM_REG_NR] = { |
| [SPM_REG_CFG] = 0x08, |
| [SPM_REG_SPM_CTL] = 0x30, |
| [SPM_REG_DLY] = 0x34, |
| [SPM_REG_SEQ_ENTRY] = 0x400, |
| }; |
| |
| /* SPM register data for 8909 */ |
| static const struct spm_reg_data spm_reg_8909_cpu = { |
| .reg_offset = spm_reg_offset_v3_0, |
| .spm_cfg = 0x1, |
| .spm_dly = 0x3C102800, |
| .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90, |
| 0x5B, 0x60, 0x03, 0x60, 0x76, 0x76, 0x0B, 0x94, 0x5B, 0x80, |
| 0x10, 0x26, 0x30, 0x0F }, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 5, |
| }; |
| |
| /* SPM register data for 8916 */ |
| static const struct spm_reg_data spm_reg_8916_cpu = { |
| .reg_offset = spm_reg_offset_v3_0, |
| .spm_cfg = 0x1, |
| .spm_dly = 0x3C102800, |
| .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90, |
| 0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B, |
| 0x80, 0x10, 0x26, 0x30, 0x0F }, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 5, |
| }; |
| |
| static const struct spm_reg_data spm_reg_8939_cpu = { |
| .reg_offset = spm_reg_offset_v3_0, |
| .spm_cfg = 0x1, |
| .spm_dly = 0x3C102800, |
| .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x50, 0x1B, 0x10, 0x80, |
| 0x30, 0x90, 0x5B, 0x60, 0x50, 0x03, 0x60, 0x76, 0x76, 0x0B, |
| 0x50, 0x1B, 0x94, 0x5B, 0x80, 0x10, 0x26, 0x30, 0x50, 0x0F }, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 5, |
| }; |
| |
| static const u16 spm_reg_offset_v2_3[SPM_REG_NR] = { |
| [SPM_REG_CFG] = 0x08, |
| [SPM_REG_SPM_CTL] = 0x30, |
| [SPM_REG_DLY] = 0x34, |
| [SPM_REG_PMIC_DATA_0] = 0x40, |
| [SPM_REG_PMIC_DATA_1] = 0x44, |
| }; |
| |
| /* SPM register data for 8976 */ |
| static const struct spm_reg_data spm_reg_8976_gold_l2 = { |
| .reg_offset = spm_reg_offset_v2_3, |
| .spm_cfg = 0x14, |
| .spm_dly = 0x3c11840a, |
| .pmic_data[0] = 0x03030080, |
| .pmic_data[1] = 0x00030000, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 3, |
| }; |
| |
| static const struct spm_reg_data spm_reg_8976_silver_l2 = { |
| .reg_offset = spm_reg_offset_v2_3, |
| .spm_cfg = 0x14, |
| .spm_dly = 0x3c102800, |
| .pmic_data[0] = 0x03030080, |
| .pmic_data[1] = 0x00030000, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 2, |
| }; |
| |
| static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = { |
| [SPM_REG_CFG] = 0x08, |
| [SPM_REG_SPM_CTL] = 0x30, |
| [SPM_REG_DLY] = 0x34, |
| [SPM_REG_SEQ_ENTRY] = 0x80, |
| }; |
| |
| /* SPM register data for 8974, 8084 */ |
| static const struct spm_reg_data spm_reg_8974_8084_cpu = { |
| .reg_offset = spm_reg_offset_v2_1, |
| .spm_cfg = 0x1, |
| .spm_dly = 0x3C102800, |
| .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03, |
| 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30, |
| 0x0F }, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 3, |
| }; |
| |
| /* SPM register data for 8226 */ |
| static const struct spm_reg_data spm_reg_8226_cpu = { |
| .reg_offset = spm_reg_offset_v2_1, |
| .spm_cfg = 0x0, |
| .spm_dly = 0x3C102800, |
| .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90, |
| 0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B, |
| 0x80, 0x10, 0x26, 0x30, 0x0F }, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 5, |
| }; |
| |
| static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = { |
| [SPM_REG_CFG] = 0x08, |
| [SPM_REG_SPM_CTL] = 0x20, |
| [SPM_REG_PMIC_DLY] = 0x24, |
| [SPM_REG_PMIC_DATA_0] = 0x28, |
| [SPM_REG_PMIC_DATA_1] = 0x2C, |
| [SPM_REG_SEQ_ENTRY] = 0x80, |
| }; |
| |
| /* SPM register data for 8064 */ |
| static const struct spm_reg_data spm_reg_8064_cpu = { |
| .reg_offset = spm_reg_offset_v1_1, |
| .spm_cfg = 0x1F, |
| .pmic_dly = 0x02020004, |
| .pmic_data[0] = 0x0084009C, |
| .pmic_data[1] = 0x00A4001C, |
| .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01, |
| 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F }, |
| .start_index[PM_SLEEP_MODE_STBY] = 0, |
| .start_index[PM_SLEEP_MODE_SPC] = 2, |
| }; |
| |
| static inline void spm_register_write(struct spm_driver_data *drv, |
| enum spm_reg reg, u32 val) |
| { |
| if (drv->reg_data->reg_offset[reg]) |
| writel_relaxed(val, drv->reg_base + |
| drv->reg_data->reg_offset[reg]); |
| } |
| |
| /* Ensure a guaranteed write, before return */ |
| static inline void spm_register_write_sync(struct spm_driver_data *drv, |
| enum spm_reg reg, u32 val) |
| { |
| u32 ret; |
| |
| if (!drv->reg_data->reg_offset[reg]) |
| return; |
| |
| do { |
| writel_relaxed(val, drv->reg_base + |
| drv->reg_data->reg_offset[reg]); |
| ret = readl_relaxed(drv->reg_base + |
| drv->reg_data->reg_offset[reg]); |
| if (ret == val) |
| break; |
| cpu_relax(); |
| } while (1); |
| } |
| |
| static inline u32 spm_register_read(struct spm_driver_data *drv, |
| enum spm_reg reg) |
| { |
| return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]); |
| } |
| |
| void spm_set_low_power_mode(struct spm_driver_data *drv, |
| enum pm_sleep_mode mode) |
| { |
| u32 start_index; |
| u32 ctl_val; |
| |
| start_index = drv->reg_data->start_index[mode]; |
| |
| ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL); |
| ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT); |
| ctl_val |= start_index << SPM_CTL_INDEX_SHIFT; |
| ctl_val |= SPM_CTL_EN; |
| spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val); |
| } |
| |
| static const struct of_device_id spm_match_table[] = { |
| { .compatible = "qcom,sdm660-gold-saw2-v4.1-l2", |
| .data = &spm_reg_660_gold_l2 }, |
| { .compatible = "qcom,sdm660-silver-saw2-v4.1-l2", |
| .data = &spm_reg_660_silver_l2 }, |
| { .compatible = "qcom,msm8226-saw2-v2.1-cpu", |
| .data = &spm_reg_8226_cpu }, |
| { .compatible = "qcom,msm8909-saw2-v3.0-cpu", |
| .data = &spm_reg_8909_cpu }, |
| { .compatible = "qcom,msm8916-saw2-v3.0-cpu", |
| .data = &spm_reg_8916_cpu }, |
| { .compatible = "qcom,msm8939-saw2-v3.0-cpu", |
| .data = &spm_reg_8939_cpu }, |
| { .compatible = "qcom,msm8974-saw2-v2.1-cpu", |
| .data = &spm_reg_8974_8084_cpu }, |
| { .compatible = "qcom,msm8976-gold-saw2-v2.3-l2", |
| .data = &spm_reg_8976_gold_l2 }, |
| { .compatible = "qcom,msm8976-silver-saw2-v2.3-l2", |
| .data = &spm_reg_8976_silver_l2 }, |
| { .compatible = "qcom,msm8998-gold-saw2-v4.1-l2", |
| .data = &spm_reg_8998_gold_l2 }, |
| { .compatible = "qcom,msm8998-silver-saw2-v4.1-l2", |
| .data = &spm_reg_8998_silver_l2 }, |
| { .compatible = "qcom,apq8084-saw2-v2.1-cpu", |
| .data = &spm_reg_8974_8084_cpu }, |
| { .compatible = "qcom,apq8064-saw2-v1.1-cpu", |
| .data = &spm_reg_8064_cpu }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, spm_match_table); |
| |
| static int spm_dev_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match_id; |
| struct spm_driver_data *drv; |
| void __iomem *addr; |
| |
| drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| |
| drv->reg_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(drv->reg_base)) |
| return PTR_ERR(drv->reg_base); |
| |
| match_id = of_match_node(spm_match_table, pdev->dev.of_node); |
| if (!match_id) |
| return -ENODEV; |
| |
| drv->reg_data = match_id->data; |
| platform_set_drvdata(pdev, drv); |
| |
| /* Write the SPM sequences first.. */ |
| addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY]; |
| __iowrite32_copy(addr, drv->reg_data->seq, |
| ARRAY_SIZE(drv->reg_data->seq) / 4); |
| |
| /* |
| * ..and then the control registers. |
| * On some SoC if the control registers are written first and if the |
| * CPU was held in reset, the reset signal could trigger the SPM state |
| * machine, before the sequences are completely written. |
| */ |
| spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl); |
| spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit); |
| spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg); |
| spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly); |
| spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly); |
| spm_register_write(drv, SPM_REG_PMIC_DATA_0, |
| drv->reg_data->pmic_data[0]); |
| spm_register_write(drv, SPM_REG_PMIC_DATA_1, |
| drv->reg_data->pmic_data[1]); |
| |
| /* Set up Standby as the default low power mode */ |
| if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL]) |
| spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); |
| |
| return 0; |
| } |
| |
| static struct platform_driver spm_driver = { |
| .probe = spm_dev_probe, |
| .driver = { |
| .name = "qcom_spm", |
| .of_match_table = spm_match_table, |
| }, |
| }; |
| |
| static int __init qcom_spm_init(void) |
| { |
| return platform_driver_register(&spm_driver); |
| } |
| arch_initcall(qcom_spm_init); |
| |
| MODULE_LICENSE("GPL v2"); |