| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/irqdesc.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irq.h> |
| #include <linux/mfd/imx25-tsadc.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| static struct regmap_config mx25_tsadc_regmap_config = { |
| .fast_io = true, |
| .max_register = 8, |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| }; |
| |
| static void mx25_tsadc_irq_handler(struct irq_desc *desc) |
| { |
| struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc); |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| u32 status; |
| |
| chained_irq_enter(chip, desc); |
| |
| regmap_read(tsadc->regs, MX25_TSC_TGSR, &status); |
| |
| if (status & MX25_TGSR_GCQ_INT) |
| generic_handle_domain_irq(tsadc->domain, 1); |
| |
| if (status & MX25_TGSR_TCQ_INT) |
| generic_handle_domain_irq(tsadc->domain, 0); |
| |
| chained_irq_exit(chip, desc); |
| } |
| |
| static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| struct mx25_tsadc *tsadc = d->host_data; |
| |
| irq_set_chip_data(irq, tsadc); |
| irq_set_chip_and_handler(irq, &dummy_irq_chip, |
| handle_level_irq); |
| irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops mx25_tsadc_domain_ops = { |
| .map = mx25_tsadc_domain_map, |
| .xlate = irq_domain_xlate_onecell, |
| }; |
| |
| static int mx25_tsadc_setup_irq(struct platform_device *pdev, |
| struct mx25_tsadc *tsadc) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| int irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops, |
| tsadc); |
| if (!tsadc->domain) { |
| dev_err(dev, "Failed to add irq domain\n"); |
| return -ENOMEM; |
| } |
| |
| irq_set_chained_handler_and_data(irq, mx25_tsadc_irq_handler, tsadc); |
| |
| return 0; |
| } |
| |
| static int mx25_tsadc_unset_irq(struct platform_device *pdev) |
| { |
| struct mx25_tsadc *tsadc = platform_get_drvdata(pdev); |
| int irq = platform_get_irq(pdev, 0); |
| |
| if (irq >= 0) { |
| irq_set_chained_handler_and_data(irq, NULL, NULL); |
| irq_domain_remove(tsadc->domain); |
| } |
| |
| return 0; |
| } |
| |
| static void mx25_tsadc_setup_clk(struct platform_device *pdev, |
| struct mx25_tsadc *tsadc) |
| { |
| unsigned clk_div; |
| |
| /* |
| * According to the datasheet the ADC clock should never |
| * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses |
| * a funny clock divider. To keep the ADC conversion time constant |
| * adapt the ADC internal clock divider to the IPG clock rate. |
| */ |
| |
| dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n", |
| clk_get_rate(tsadc->clk)); |
| |
| clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000); |
| dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div); |
| |
| /* adc clock = IPG clock / (2 * div + 2) */ |
| clk_div -= 2; |
| clk_div /= 2; |
| |
| /* |
| * the ADC clock divider changes its behaviour when values below 4 |
| * are used: it is fixed to "/ 10" in this case |
| */ |
| clk_div = max_t(unsigned, 4, clk_div); |
| |
| dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n", |
| clk_get_rate(tsadc->clk) / (2 * clk_div + 2)); |
| |
| regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, |
| MX25_TGCR_ADCCLKCFG(0x1f), |
| MX25_TGCR_ADCCLKCFG(clk_div)); |
| } |
| |
| static int mx25_tsadc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mx25_tsadc *tsadc; |
| int ret; |
| void __iomem *iomem; |
| |
| tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL); |
| if (!tsadc) |
| return -ENOMEM; |
| |
| iomem = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(iomem)) |
| return PTR_ERR(iomem); |
| |
| tsadc->regs = devm_regmap_init_mmio(dev, iomem, |
| &mx25_tsadc_regmap_config); |
| if (IS_ERR(tsadc->regs)) { |
| dev_err(dev, "Failed to initialize regmap\n"); |
| return PTR_ERR(tsadc->regs); |
| } |
| |
| tsadc->clk = devm_clk_get(dev, "ipg"); |
| if (IS_ERR(tsadc->clk)) { |
| dev_err(dev, "Failed to get ipg clock\n"); |
| return PTR_ERR(tsadc->clk); |
| } |
| |
| /* setup clock according to the datasheet */ |
| mx25_tsadc_setup_clk(pdev, tsadc); |
| |
| /* Enable clock and reset the component */ |
| regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN, |
| MX25_TGCR_CLK_EN); |
| regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST, |
| MX25_TGCR_TSC_RST); |
| |
| /* Setup powersaving mode, but enable internal reference voltage */ |
| regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK, |
| MX25_TGCR_POWERMODE_SAVE); |
| regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN, |
| MX25_TGCR_INTREFEN); |
| |
| ret = mx25_tsadc_setup_irq(pdev, tsadc); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, tsadc); |
| |
| ret = devm_of_platform_populate(dev); |
| if (ret) |
| goto err_irq; |
| |
| return 0; |
| |
| err_irq: |
| mx25_tsadc_unset_irq(pdev); |
| |
| return ret; |
| } |
| |
| static int mx25_tsadc_remove(struct platform_device *pdev) |
| { |
| mx25_tsadc_unset_irq(pdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mx25_tsadc_ids[] = { |
| { .compatible = "fsl,imx25-tsadc" }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mx25_tsadc_ids); |
| |
| static struct platform_driver mx25_tsadc_driver = { |
| .driver = { |
| .name = "mx25-tsadc", |
| .of_match_table = mx25_tsadc_ids, |
| }, |
| .probe = mx25_tsadc_probe, |
| .remove = mx25_tsadc_remove, |
| }; |
| module_platform_driver(mx25_tsadc_driver); |
| |
| MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25"); |
| MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:mx25-tsadc"); |