| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Kontron PLD MFD core driver |
| * |
| * Copyright (c) 2010-2013 Kontron Europe GmbH |
| * Author: Michael Brunner <michael.brunner@kontron.com> |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/kempld.h> |
| #include <linux/module.h> |
| #include <linux/dmi.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/acpi.h> |
| |
| #define MAX_ID_LEN 4 |
| static char force_device_id[MAX_ID_LEN + 1] = ""; |
| module_param_string(force_device_id, force_device_id, |
| sizeof(force_device_id), 0); |
| MODULE_PARM_DESC(force_device_id, "Override detected product"); |
| |
| /* |
| * Get hardware mutex to block firmware from accessing the pld. |
| * It is possible for the firmware may hold the mutex for an extended length of |
| * time. This function will block until access has been granted. |
| */ |
| static void kempld_get_hardware_mutex(struct kempld_device_data *pld) |
| { |
| /* The mutex bit will read 1 until access has been granted */ |
| while (ioread8(pld->io_index) & KEMPLD_MUTEX_KEY) |
| usleep_range(1000, 3000); |
| } |
| |
| static void kempld_release_hardware_mutex(struct kempld_device_data *pld) |
| { |
| /* The harware mutex is released when 1 is written to the mutex bit. */ |
| iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); |
| } |
| |
| static int kempld_get_info_generic(struct kempld_device_data *pld) |
| { |
| u16 version; |
| u8 spec; |
| |
| kempld_get_mutex(pld); |
| |
| version = kempld_read16(pld, KEMPLD_VERSION); |
| spec = kempld_read8(pld, KEMPLD_SPEC); |
| pld->info.buildnr = kempld_read16(pld, KEMPLD_BUILDNR); |
| |
| pld->info.minor = KEMPLD_VERSION_GET_MINOR(version); |
| pld->info.major = KEMPLD_VERSION_GET_MAJOR(version); |
| pld->info.number = KEMPLD_VERSION_GET_NUMBER(version); |
| pld->info.type = KEMPLD_VERSION_GET_TYPE(version); |
| |
| if (spec == 0xff) { |
| pld->info.spec_minor = 0; |
| pld->info.spec_major = 1; |
| } else { |
| pld->info.spec_minor = KEMPLD_SPEC_GET_MINOR(spec); |
| pld->info.spec_major = KEMPLD_SPEC_GET_MAJOR(spec); |
| } |
| |
| if (pld->info.spec_major > 0) |
| pld->feature_mask = kempld_read16(pld, KEMPLD_FEATURE); |
| else |
| pld->feature_mask = 0; |
| |
| kempld_release_mutex(pld); |
| |
| return 0; |
| } |
| |
| enum kempld_cells { |
| KEMPLD_I2C = 0, |
| KEMPLD_WDT, |
| KEMPLD_GPIO, |
| KEMPLD_UART, |
| }; |
| |
| static const char *kempld_dev_names[] = { |
| [KEMPLD_I2C] = "kempld-i2c", |
| [KEMPLD_WDT] = "kempld-wdt", |
| [KEMPLD_GPIO] = "kempld-gpio", |
| [KEMPLD_UART] = "kempld-uart", |
| }; |
| |
| #define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_dev_names) |
| |
| static int kempld_register_cells_generic(struct kempld_device_data *pld) |
| { |
| struct mfd_cell devs[KEMPLD_MAX_DEVS] = {}; |
| int i = 0; |
| |
| if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C) |
| devs[i++].name = kempld_dev_names[KEMPLD_I2C]; |
| |
| if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG) |
| devs[i++].name = kempld_dev_names[KEMPLD_WDT]; |
| |
| if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO) |
| devs[i++].name = kempld_dev_names[KEMPLD_GPIO]; |
| |
| if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART) |
| devs[i++].name = kempld_dev_names[KEMPLD_UART]; |
| |
| return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL); |
| } |
| |
| static struct resource kempld_ioresource = { |
| .start = KEMPLD_IOINDEX, |
| .end = KEMPLD_IODATA, |
| .flags = IORESOURCE_IO, |
| }; |
| |
| static const struct kempld_platform_data kempld_platform_data_generic = { |
| .pld_clock = KEMPLD_CLK, |
| .ioresource = &kempld_ioresource, |
| .get_hardware_mutex = kempld_get_hardware_mutex, |
| .release_hardware_mutex = kempld_release_hardware_mutex, |
| .get_info = kempld_get_info_generic, |
| .register_cells = kempld_register_cells_generic, |
| }; |
| |
| static struct platform_device *kempld_pdev; |
| |
| static int kempld_create_platform_device(const struct dmi_system_id *id) |
| { |
| const struct kempld_platform_data *pdata = id->driver_data; |
| int ret; |
| |
| kempld_pdev = platform_device_alloc("kempld", -1); |
| if (!kempld_pdev) |
| return -ENOMEM; |
| |
| ret = platform_device_add_data(kempld_pdev, pdata, sizeof(*pdata)); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add_resources(kempld_pdev, pdata->ioresource, 1); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add(kempld_pdev); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| platform_device_put(kempld_pdev); |
| return ret; |
| } |
| |
| /** |
| * kempld_read8 - read 8 bit register |
| * @pld: kempld_device_data structure describing the PLD |
| * @index: register index on the chip |
| * |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| u8 kempld_read8(struct kempld_device_data *pld, u8 index) |
| { |
| iowrite8(index, pld->io_index); |
| return ioread8(pld->io_data); |
| } |
| EXPORT_SYMBOL_GPL(kempld_read8); |
| |
| /** |
| * kempld_write8 - write 8 bit register |
| * @pld: kempld_device_data structure describing the PLD |
| * @index: register index on the chip |
| * @data: new register value |
| * |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data) |
| { |
| iowrite8(index, pld->io_index); |
| iowrite8(data, pld->io_data); |
| } |
| EXPORT_SYMBOL_GPL(kempld_write8); |
| |
| /** |
| * kempld_read16 - read 16 bit register |
| * @pld: kempld_device_data structure describing the PLD |
| * @index: register index on the chip |
| * |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| u16 kempld_read16(struct kempld_device_data *pld, u8 index) |
| { |
| return kempld_read8(pld, index) | kempld_read8(pld, index + 1) << 8; |
| } |
| EXPORT_SYMBOL_GPL(kempld_read16); |
| |
| /** |
| * kempld_write16 - write 16 bit register |
| * @pld: kempld_device_data structure describing the PLD |
| * @index: register index on the chip |
| * @data: new register value |
| * |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data) |
| { |
| kempld_write8(pld, index, (u8)data); |
| kempld_write8(pld, index + 1, (u8)(data >> 8)); |
| } |
| EXPORT_SYMBOL_GPL(kempld_write16); |
| |
| /** |
| * kempld_read32 - read 32 bit register |
| * @pld: kempld_device_data structure describing the PLD |
| * @index: register index on the chip |
| * |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| u32 kempld_read32(struct kempld_device_data *pld, u8 index) |
| { |
| return kempld_read16(pld, index) | kempld_read16(pld, index + 2) << 16; |
| } |
| EXPORT_SYMBOL_GPL(kempld_read32); |
| |
| /** |
| * kempld_write32 - write 32 bit register |
| * @pld: kempld_device_data structure describing the PLD |
| * @index: register index on the chip |
| * @data: new register value |
| * |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data) |
| { |
| kempld_write16(pld, index, (u16)data); |
| kempld_write16(pld, index + 2, (u16)(data >> 16)); |
| } |
| EXPORT_SYMBOL_GPL(kempld_write32); |
| |
| /** |
| * kempld_get_mutex - acquire PLD mutex |
| * @pld: kempld_device_data structure describing the PLD |
| */ |
| void kempld_get_mutex(struct kempld_device_data *pld) |
| { |
| const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); |
| |
| mutex_lock(&pld->lock); |
| pdata->get_hardware_mutex(pld); |
| } |
| EXPORT_SYMBOL_GPL(kempld_get_mutex); |
| |
| /** |
| * kempld_release_mutex - release PLD mutex |
| * @pld: kempld_device_data structure describing the PLD |
| */ |
| void kempld_release_mutex(struct kempld_device_data *pld) |
| { |
| const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); |
| |
| pdata->release_hardware_mutex(pld); |
| mutex_unlock(&pld->lock); |
| } |
| EXPORT_SYMBOL_GPL(kempld_release_mutex); |
| |
| /** |
| * kempld_get_info - update device specific information |
| * @pld: kempld_device_data structure describing the PLD |
| * |
| * This function calls the configured board specific kempld_get_info_XXXX |
| * function which is responsible for gathering information about the specific |
| * hardware. The information is then stored within the pld structure. |
| */ |
| static int kempld_get_info(struct kempld_device_data *pld) |
| { |
| int ret; |
| const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); |
| char major, minor; |
| |
| ret = pdata->get_info(pld); |
| if (ret) |
| return ret; |
| |
| /* The Kontron PLD firmware version string has the following format: |
| * Pwxy.zzzz |
| * P: Fixed |
| * w: PLD number - 1 hex digit |
| * x: Major version - 1 alphanumerical digit (0-9A-V) |
| * y: Minor version - 1 alphanumerical digit (0-9A-V) |
| * zzzz: Build number - 4 zero padded hex digits */ |
| |
| if (pld->info.major < 10) |
| major = pld->info.major + '0'; |
| else |
| major = (pld->info.major - 10) + 'A'; |
| if (pld->info.minor < 10) |
| minor = pld->info.minor + '0'; |
| else |
| minor = (pld->info.minor - 10) + 'A'; |
| |
| ret = scnprintf(pld->info.version, sizeof(pld->info.version), |
| "P%X%c%c.%04X", pld->info.number, major, minor, |
| pld->info.buildnr); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * kempld_register_cells - register cell drivers |
| * |
| * This function registers cell drivers for the detected hardware by calling |
| * the configured kempld_register_cells_XXXX function which is responsible |
| * to detect and register the needed cell drivers. |
| */ |
| static int kempld_register_cells(struct kempld_device_data *pld) |
| { |
| const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); |
| |
| return pdata->register_cells(pld); |
| } |
| |
| static const char *kempld_get_type_string(struct kempld_device_data *pld) |
| { |
| const char *version_type; |
| |
| switch (pld->info.type) { |
| case 0: |
| version_type = "release"; |
| break; |
| case 1: |
| version_type = "debug"; |
| break; |
| case 2: |
| version_type = "custom"; |
| break; |
| default: |
| version_type = "unspecified"; |
| break; |
| } |
| |
| return version_type; |
| } |
| |
| static ssize_t pld_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct kempld_device_data *pld = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%s\n", pld->info.version); |
| } |
| |
| static ssize_t pld_specification_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct kempld_device_data *pld = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%d.%d\n", pld->info.spec_major, pld->info.spec_minor); |
| } |
| |
| static ssize_t pld_type_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct kempld_device_data *pld = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%s\n", kempld_get_type_string(pld)); |
| } |
| |
| static DEVICE_ATTR_RO(pld_version); |
| static DEVICE_ATTR_RO(pld_specification); |
| static DEVICE_ATTR_RO(pld_type); |
| |
| static struct attribute *pld_attributes[] = { |
| &dev_attr_pld_version.attr, |
| &dev_attr_pld_specification.attr, |
| &dev_attr_pld_type.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group pld_attr_group = { |
| .attrs = pld_attributes, |
| }; |
| |
| static int kempld_detect_device(struct kempld_device_data *pld) |
| { |
| u8 index_reg; |
| int ret; |
| |
| mutex_lock(&pld->lock); |
| |
| /* Check for empty IO space */ |
| index_reg = ioread8(pld->io_index); |
| if (index_reg == 0xff && ioread8(pld->io_data) == 0xff) { |
| mutex_unlock(&pld->lock); |
| return -ENODEV; |
| } |
| |
| /* Release hardware mutex if acquired */ |
| if (!(index_reg & KEMPLD_MUTEX_KEY)) { |
| iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); |
| /* PXT and COMe-cPC2 boards may require a second release */ |
| iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); |
| } |
| |
| mutex_unlock(&pld->lock); |
| |
| ret = kempld_get_info(pld); |
| if (ret) |
| return ret; |
| |
| dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n", |
| pld->info.version, kempld_get_type_string(pld), |
| pld->info.spec_major, pld->info.spec_minor); |
| |
| ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group); |
| if (ret) |
| return ret; |
| |
| ret = kempld_register_cells(pld); |
| if (ret) |
| sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static int kempld_get_acpi_data(struct platform_device *pdev) |
| { |
| struct list_head resource_list; |
| struct resource *resources; |
| struct resource_entry *rentry; |
| struct device *dev = &pdev->dev; |
| struct acpi_device *acpi_dev = ACPI_COMPANION(dev); |
| const struct kempld_platform_data *pdata; |
| int ret; |
| int count; |
| |
| pdata = acpi_device_get_match_data(dev); |
| ret = platform_device_add_data(pdev, pdata, |
| sizeof(struct kempld_platform_data)); |
| if (ret) |
| return ret; |
| |
| INIT_LIST_HEAD(&resource_list); |
| ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL); |
| if (ret < 0) |
| goto out; |
| |
| count = ret; |
| |
| if (count == 0) { |
| ret = platform_device_add_resources(pdev, pdata->ioresource, 1); |
| goto out; |
| } |
| |
| resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources), |
| GFP_KERNEL); |
| if (!resources) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| count = 0; |
| list_for_each_entry(rentry, &resource_list, node) { |
| memcpy(&resources[count], rentry->res, |
| sizeof(*resources)); |
| count++; |
| } |
| ret = platform_device_add_resources(pdev, resources, count); |
| |
| out: |
| acpi_dev_free_resource_list(&resource_list); |
| |
| return ret; |
| } |
| #else |
| static int kempld_get_acpi_data(struct platform_device *pdev) |
| { |
| return -ENODEV; |
| } |
| #endif /* CONFIG_ACPI */ |
| |
| static int kempld_probe(struct platform_device *pdev) |
| { |
| const struct kempld_platform_data *pdata; |
| struct device *dev = &pdev->dev; |
| struct kempld_device_data *pld; |
| struct resource *ioport; |
| int ret; |
| |
| if (kempld_pdev == NULL) { |
| /* |
| * No kempld_pdev device has been registered in kempld_init, |
| * so we seem to be probing an ACPI platform device. |
| */ |
| ret = kempld_get_acpi_data(pdev); |
| if (ret) |
| return ret; |
| } else if (kempld_pdev != pdev) { |
| /* |
| * The platform device we are probing is not the one we |
| * registered in kempld_init using the DMI table, so this one |
| * comes from ACPI. |
| * As we can only probe one - abort here and use the DMI |
| * based one instead. |
| */ |
| dev_notice(dev, "platform device exists - not using ACPI\n"); |
| return -ENODEV; |
| } |
| pdata = dev_get_platdata(dev); |
| |
| pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL); |
| if (!pld) |
| return -ENOMEM; |
| |
| ioport = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (!ioport) |
| return -EINVAL; |
| |
| pld->io_base = devm_ioport_map(dev, ioport->start, |
| resource_size(ioport)); |
| if (!pld->io_base) |
| return -ENOMEM; |
| |
| pld->io_index = pld->io_base; |
| pld->io_data = pld->io_base + 1; |
| pld->pld_clock = pdata->pld_clock; |
| pld->dev = dev; |
| |
| mutex_init(&pld->lock); |
| platform_set_drvdata(pdev, pld); |
| |
| return kempld_detect_device(pld); |
| } |
| |
| static int kempld_remove(struct platform_device *pdev) |
| { |
| struct kempld_device_data *pld = platform_get_drvdata(pdev); |
| const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); |
| |
| sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); |
| |
| mfd_remove_devices(&pdev->dev); |
| pdata->release_hardware_mutex(pld); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id kempld_acpi_table[] = { |
| { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic }, |
| { "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, kempld_acpi_table); |
| #endif |
| |
| static struct platform_driver kempld_driver = { |
| .driver = { |
| .name = "kempld", |
| .acpi_match_table = ACPI_PTR(kempld_acpi_table), |
| }, |
| .probe = kempld_probe, |
| .remove = kempld_remove, |
| }; |
| |
| static const struct dmi_system_id kempld_dmi_table[] __initconst = { |
| { |
| .ident = "BBD6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "BBL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "BDV7", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "BHL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bHL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "BKL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "BSL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CAL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CBL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cBL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CBW6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CCR2", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CCR6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CDV7", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHR2", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHR2", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHR2", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHR6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHR6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CHR6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CKL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CNTG", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-PC"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CNTG", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-bPC2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CNTX", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "PXT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CSL6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "CVV6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "FRI2", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BIOS_VERSION, "FRI2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "FRI2", |
| .matches = { |
| DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "A203", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "M4A1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "MAL1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "MAPL", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "MBR1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "ETX-OH"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "MVV1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "NTC1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "NTC1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "nETXe-TT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "NTC1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "NUP1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-mCT"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "PAPL", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "SXAL", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "SXAL4", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "UNP1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-DC"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "UNP1", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cDC2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "UNTG", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-PC"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "UNTG", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cPC2"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "UUP6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cCT6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "UTH6", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "COMe-cTH6"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, { |
| .ident = "Q7AL", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), |
| DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"), |
| }, |
| .driver_data = (void *)&kempld_platform_data_generic, |
| .callback = kempld_create_platform_device, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(dmi, kempld_dmi_table); |
| |
| static int __init kempld_init(void) |
| { |
| const struct dmi_system_id *id; |
| |
| if (force_device_id[0]) { |
| for (id = kempld_dmi_table; |
| id->matches[0].slot != DMI_NONE; id++) |
| if (strstr(id->ident, force_device_id)) |
| if (id->callback && !id->callback(id)) |
| break; |
| if (id->matches[0].slot == DMI_NONE) |
| return -ENODEV; |
| } else { |
| dmi_check_system(kempld_dmi_table); |
| } |
| |
| return platform_driver_register(&kempld_driver); |
| } |
| |
| static void __exit kempld_exit(void) |
| { |
| if (kempld_pdev) |
| platform_device_unregister(kempld_pdev); |
| |
| platform_driver_unregister(&kempld_driver); |
| } |
| |
| module_init(kempld_init); |
| module_exit(kempld_exit); |
| |
| MODULE_DESCRIPTION("KEM PLD Core Driver"); |
| MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:kempld-core"); |