| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // SY8824C/SY8824E regulator driver |
| // |
| // Copyright (C) 2019 Synaptics Incorporated |
| // |
| // Author: Jisheng Zhang <jszhang@kernel.org> |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #define SY8824C_BUCK_EN (1 << 7) |
| #define SY8824C_MODE (1 << 6) |
| |
| struct sy8824_config { |
| /* registers */ |
| unsigned int vol_reg; |
| unsigned int mode_reg; |
| unsigned int enable_reg; |
| /* Voltage range and step(linear) */ |
| unsigned int vsel_min; |
| unsigned int vsel_step; |
| unsigned int vsel_count; |
| const struct regmap_config *config; |
| }; |
| |
| struct sy8824_device_info { |
| struct device *dev; |
| struct regulator_desc desc; |
| struct regulator_init_data *regulator; |
| const struct sy8824_config *cfg; |
| }; |
| |
| static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct sy8824_device_info *di = rdev_get_drvdata(rdev); |
| const struct sy8824_config *cfg = di->cfg; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| regmap_update_bits(rdev->regmap, cfg->mode_reg, |
| SY8824C_MODE, SY8824C_MODE); |
| break; |
| case REGULATOR_MODE_NORMAL: |
| regmap_update_bits(rdev->regmap, cfg->mode_reg, |
| SY8824C_MODE, 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static unsigned int sy8824_get_mode(struct regulator_dev *rdev) |
| { |
| struct sy8824_device_info *di = rdev_get_drvdata(rdev); |
| const struct sy8824_config *cfg = di->cfg; |
| u32 val; |
| int ret = 0; |
| |
| ret = regmap_read(rdev->regmap, cfg->mode_reg, &val); |
| if (ret < 0) |
| return ret; |
| if (val & SY8824C_MODE) |
| return REGULATOR_MODE_FAST; |
| else |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static const struct regulator_ops sy8824_regulator_ops = { |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .map_voltage = regulator_map_voltage_linear, |
| .list_voltage = regulator_list_voltage_linear, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_mode = sy8824_set_mode, |
| .get_mode = sy8824_get_mode, |
| }; |
| |
| static int sy8824_regulator_register(struct sy8824_device_info *di, |
| struct regulator_config *config) |
| { |
| struct regulator_desc *rdesc = &di->desc; |
| const struct sy8824_config *cfg = di->cfg; |
| struct regulator_dev *rdev; |
| |
| rdesc->name = "sy8824-reg"; |
| rdesc->supply_name = "vin"; |
| rdesc->ops = &sy8824_regulator_ops; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->n_voltages = cfg->vsel_count; |
| rdesc->enable_reg = cfg->enable_reg; |
| rdesc->enable_mask = SY8824C_BUCK_EN; |
| rdesc->min_uV = cfg->vsel_min; |
| rdesc->uV_step = cfg->vsel_step; |
| rdesc->vsel_reg = cfg->vol_reg; |
| rdesc->vsel_mask = cfg->vsel_count - 1; |
| rdesc->owner = THIS_MODULE; |
| |
| rdev = devm_regulator_register(di->dev, &di->desc, config); |
| return PTR_ERR_OR_ZERO(rdev); |
| } |
| |
| static const struct regmap_config sy8824_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .num_reg_defaults_raw = 1, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config sy20276_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .num_reg_defaults_raw = 2, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static int sy8824_i2c_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct device_node *np = dev->of_node; |
| struct sy8824_device_info *di; |
| struct regulator_config config = { }; |
| struct regmap *regmap; |
| int ret; |
| |
| di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL); |
| if (!di) |
| return -ENOMEM; |
| |
| di->regulator = of_get_regulator_init_data(dev, np, &di->desc); |
| if (!di->regulator) { |
| dev_err(dev, "Platform data not found!\n"); |
| return -EINVAL; |
| } |
| |
| di->dev = dev; |
| di->cfg = of_device_get_match_data(dev); |
| |
| regmap = devm_regmap_init_i2c(client, di->cfg->config); |
| if (IS_ERR(regmap)) { |
| dev_err(dev, "Failed to allocate regmap!\n"); |
| return PTR_ERR(regmap); |
| } |
| i2c_set_clientdata(client, di); |
| |
| config.dev = di->dev; |
| config.init_data = di->regulator; |
| config.regmap = regmap; |
| config.driver_data = di; |
| config.of_node = np; |
| |
| ret = sy8824_regulator_register(di, &config); |
| if (ret < 0) |
| dev_err(dev, "Failed to register regulator!\n"); |
| return ret; |
| } |
| |
| static const struct sy8824_config sy8824c_cfg = { |
| .vol_reg = 0x00, |
| .mode_reg = 0x00, |
| .enable_reg = 0x00, |
| .vsel_min = 762500, |
| .vsel_step = 12500, |
| .vsel_count = 64, |
| .config = &sy8824_regmap_config, |
| }; |
| |
| static const struct sy8824_config sy8824e_cfg = { |
| .vol_reg = 0x00, |
| .mode_reg = 0x00, |
| .enable_reg = 0x00, |
| .vsel_min = 700000, |
| .vsel_step = 12500, |
| .vsel_count = 64, |
| .config = &sy8824_regmap_config, |
| }; |
| |
| static const struct sy8824_config sy20276_cfg = { |
| .vol_reg = 0x00, |
| .mode_reg = 0x01, |
| .enable_reg = 0x01, |
| .vsel_min = 600000, |
| .vsel_step = 10000, |
| .vsel_count = 128, |
| .config = &sy20276_regmap_config, |
| }; |
| |
| static const struct sy8824_config sy20278_cfg = { |
| .vol_reg = 0x00, |
| .mode_reg = 0x01, |
| .enable_reg = 0x01, |
| .vsel_min = 762500, |
| .vsel_step = 12500, |
| .vsel_count = 64, |
| .config = &sy20276_regmap_config, |
| }; |
| |
| static const struct of_device_id sy8824_dt_ids[] = { |
| { |
| .compatible = "silergy,sy8824c", |
| .data = &sy8824c_cfg |
| }, |
| { |
| .compatible = "silergy,sy8824e", |
| .data = &sy8824e_cfg |
| }, |
| { |
| .compatible = "silergy,sy20276", |
| .data = &sy20276_cfg |
| }, |
| { |
| .compatible = "silergy,sy20278", |
| .data = &sy20278_cfg |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sy8824_dt_ids); |
| |
| static const struct i2c_device_id sy8824_id[] = { |
| { "sy8824", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, sy8824_id); |
| |
| static struct i2c_driver sy8824_regulator_driver = { |
| .driver = { |
| .name = "sy8824-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = sy8824_dt_ids, |
| }, |
| .probe = sy8824_i2c_probe, |
| .id_table = sy8824_id, |
| }; |
| module_i2c_driver(sy8824_regulator_driver); |
| |
| MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); |
| MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver"); |
| MODULE_LICENSE("GPL v2"); |