| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Contiguous Memory Allocator |
| * |
| * Copyright (c) 2010-2011 by Samsung Electronics. |
| * Copyright IBM Corporation, 2013 |
| * Copyright LG Electronics Inc., 2014 |
| * Written by: |
| * Marek Szyprowski <m.szyprowski@samsung.com> |
| * Michal Nazarewicz <mina86@mina86.com> |
| * Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> |
| * Joonsoo Kim <iamjoonsoo.kim@lge.com> |
| */ |
| |
| #define pr_fmt(fmt) "cma: " fmt |
| |
| #ifdef CONFIG_CMA_DEBUG |
| #ifndef DEBUG |
| # define DEBUG |
| #endif |
| #endif |
| #define CREATE_TRACE_POINTS |
| |
| #include <linux/memblock.h> |
| #include <linux/err.h> |
| #include <linux/mm.h> |
| #include <linux/sizes.h> |
| #include <linux/slab.h> |
| #include <linux/log2.h> |
| #include <linux/cma.h> |
| #include <linux/highmem.h> |
| #include <linux/io.h> |
| #include <linux/kmemleak.h> |
| #include <trace/events/cma.h> |
| |
| #include "internal.h" |
| #include "cma.h" |
| |
| struct cma cma_areas[MAX_CMA_AREAS]; |
| unsigned cma_area_count; |
| static DEFINE_MUTEX(cma_mutex); |
| |
| phys_addr_t cma_get_base(const struct cma *cma) |
| { |
| return PFN_PHYS(cma->base_pfn); |
| } |
| |
| unsigned long cma_get_size(const struct cma *cma) |
| { |
| return cma->count << PAGE_SHIFT; |
| } |
| |
| const char *cma_get_name(const struct cma *cma) |
| { |
| return cma->name; |
| } |
| |
| static unsigned long cma_bitmap_aligned_mask(const struct cma *cma, |
| unsigned int align_order) |
| { |
| if (align_order <= cma->order_per_bit) |
| return 0; |
| return (1UL << (align_order - cma->order_per_bit)) - 1; |
| } |
| |
| /* |
| * Find the offset of the base PFN from the specified align_order. |
| * The value returned is represented in order_per_bits. |
| */ |
| static unsigned long cma_bitmap_aligned_offset(const struct cma *cma, |
| unsigned int align_order) |
| { |
| return (cma->base_pfn & ((1UL << align_order) - 1)) |
| >> cma->order_per_bit; |
| } |
| |
| static unsigned long cma_bitmap_pages_to_bits(const struct cma *cma, |
| unsigned long pages) |
| { |
| return ALIGN(pages, 1UL << cma->order_per_bit) >> cma->order_per_bit; |
| } |
| |
| static void cma_clear_bitmap(struct cma *cma, unsigned long pfn, |
| unsigned long count) |
| { |
| unsigned long bitmap_no, bitmap_count; |
| unsigned long flags; |
| |
| bitmap_no = (pfn - cma->base_pfn) >> cma->order_per_bit; |
| bitmap_count = cma_bitmap_pages_to_bits(cma, count); |
| |
| spin_lock_irqsave(&cma->lock, flags); |
| bitmap_clear(cma->bitmap, bitmap_no, bitmap_count); |
| spin_unlock_irqrestore(&cma->lock, flags); |
| } |
| |
| static void __init cma_activate_area(struct cma *cma) |
| { |
| unsigned long base_pfn = cma->base_pfn, pfn; |
| struct zone *zone; |
| |
| cma->bitmap = bitmap_zalloc(cma_bitmap_maxno(cma), GFP_KERNEL); |
| if (!cma->bitmap) |
| goto out_error; |
| |
| /* |
| * alloc_contig_range() requires the pfn range specified to be in the |
| * same zone. Simplify by forcing the entire CMA resv range to be in the |
| * same zone. |
| */ |
| WARN_ON_ONCE(!pfn_valid(base_pfn)); |
| zone = page_zone(pfn_to_page(base_pfn)); |
| for (pfn = base_pfn + 1; pfn < base_pfn + cma->count; pfn++) { |
| WARN_ON_ONCE(!pfn_valid(pfn)); |
| if (page_zone(pfn_to_page(pfn)) != zone) |
| goto not_in_zone; |
| } |
| |
| for (pfn = base_pfn; pfn < base_pfn + cma->count; |
| pfn += pageblock_nr_pages) |
| init_cma_reserved_pageblock(pfn_to_page(pfn)); |
| |
| spin_lock_init(&cma->lock); |
| |
| #ifdef CONFIG_CMA_DEBUGFS |
| INIT_HLIST_HEAD(&cma->mem_head); |
| spin_lock_init(&cma->mem_head_lock); |
| #endif |
| |
| return; |
| |
| not_in_zone: |
| bitmap_free(cma->bitmap); |
| out_error: |
| /* Expose all pages to the buddy, they are useless for CMA. */ |
| if (!cma->reserve_pages_on_error) { |
| for (pfn = base_pfn; pfn < base_pfn + cma->count; pfn++) |
| free_reserved_page(pfn_to_page(pfn)); |
| } |
| totalcma_pages -= cma->count; |
| cma->count = 0; |
| pr_err("CMA area %s could not be activated\n", cma->name); |
| return; |
| } |
| |
| static int __init cma_init_reserved_areas(void) |
| { |
| int i; |
| |
| for (i = 0; i < cma_area_count; i++) |
| cma_activate_area(&cma_areas[i]); |
| |
| return 0; |
| } |
| core_initcall(cma_init_reserved_areas); |
| |
| void __init cma_reserve_pages_on_error(struct cma *cma) |
| { |
| cma->reserve_pages_on_error = true; |
| } |
| |
| /** |
| * cma_init_reserved_mem() - create custom contiguous area from reserved memory |
| * @base: Base address of the reserved area |
| * @size: Size of the reserved area (in bytes), |
| * @order_per_bit: Order of pages represented by one bit on bitmap. |
| * @name: The name of the area. If this parameter is NULL, the name of |
| * the area will be set to "cmaN", where N is a running counter of |
| * used areas. |
| * @res_cma: Pointer to store the created cma region. |
| * |
| * This function creates custom contiguous area from already reserved memory. |
| */ |
| int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size, |
| unsigned int order_per_bit, |
| const char *name, |
| struct cma **res_cma) |
| { |
| struct cma *cma; |
| |
| /* Sanity checks */ |
| if (cma_area_count == ARRAY_SIZE(cma_areas)) { |
| pr_err("Not enough slots for CMA reserved regions!\n"); |
| return -ENOSPC; |
| } |
| |
| if (!size || !memblock_is_region_reserved(base, size)) |
| return -EINVAL; |
| |
| /* alignment should be aligned with order_per_bit */ |
| if (!IS_ALIGNED(CMA_MIN_ALIGNMENT_PAGES, 1 << order_per_bit)) |
| return -EINVAL; |
| |
| /* ensure minimal alignment required by mm core */ |
| if (!IS_ALIGNED(base | size, CMA_MIN_ALIGNMENT_BYTES)) |
| return -EINVAL; |
| |
| /* |
| * Each reserved area must be initialised later, when more kernel |
| * subsystems (like slab allocator) are available. |
| */ |
| cma = &cma_areas[cma_area_count]; |
| |
| if (name) |
| snprintf(cma->name, CMA_MAX_NAME, name); |
| else |
| snprintf(cma->name, CMA_MAX_NAME, "cma%d\n", cma_area_count); |
| |
| cma->base_pfn = PFN_DOWN(base); |
| cma->count = size >> PAGE_SHIFT; |
| cma->order_per_bit = order_per_bit; |
| *res_cma = cma; |
| cma_area_count++; |
| totalcma_pages += (size / PAGE_SIZE); |
| |
| return 0; |
| } |
| |
| /** |
| * cma_declare_contiguous_nid() - reserve custom contiguous area |
| * @base: Base address of the reserved area optional, use 0 for any |
| * @size: Size of the reserved area (in bytes), |
| * @limit: End address of the reserved memory (optional, 0 for any). |
| * @alignment: Alignment for the CMA area, should be power of 2 or zero |
| * @order_per_bit: Order of pages represented by one bit on bitmap. |
| * @fixed: hint about where to place the reserved area |
| * @name: The name of the area. See function cma_init_reserved_mem() |
| * @res_cma: Pointer to store the created cma region. |
| * @nid: nid of the free area to find, %NUMA_NO_NODE for any node |
| * |
| * This function reserves memory from early allocator. It should be |
| * called by arch specific code once the early allocator (memblock or bootmem) |
| * has been activated and all other subsystems have already allocated/reserved |
| * memory. This function allows to create custom reserved areas. |
| * |
| * If @fixed is true, reserve contiguous area at exactly @base. If false, |
| * reserve in range from @base to @limit. |
| */ |
| int __init cma_declare_contiguous_nid(phys_addr_t base, |
| phys_addr_t size, phys_addr_t limit, |
| phys_addr_t alignment, unsigned int order_per_bit, |
| bool fixed, const char *name, struct cma **res_cma, |
| int nid) |
| { |
| phys_addr_t memblock_end = memblock_end_of_DRAM(); |
| phys_addr_t highmem_start; |
| int ret = 0; |
| |
| /* |
| * We can't use __pa(high_memory) directly, since high_memory |
| * isn't a valid direct map VA, and DEBUG_VIRTUAL will (validly) |
| * complain. Find the boundary by adding one to the last valid |
| * address. |
| */ |
| highmem_start = __pa(high_memory - 1) + 1; |
| pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n", |
| __func__, &size, &base, &limit, &alignment); |
| |
| if (cma_area_count == ARRAY_SIZE(cma_areas)) { |
| pr_err("Not enough slots for CMA reserved regions!\n"); |
| return -ENOSPC; |
| } |
| |
| if (!size) |
| return -EINVAL; |
| |
| if (alignment && !is_power_of_2(alignment)) |
| return -EINVAL; |
| |
| if (!IS_ENABLED(CONFIG_NUMA)) |
| nid = NUMA_NO_NODE; |
| |
| /* Sanitise input arguments. */ |
| alignment = max_t(phys_addr_t, alignment, CMA_MIN_ALIGNMENT_BYTES); |
| if (fixed && base & (alignment - 1)) { |
| ret = -EINVAL; |
| pr_err("Region at %pa must be aligned to %pa bytes\n", |
| &base, &alignment); |
| goto err; |
| } |
| base = ALIGN(base, alignment); |
| size = ALIGN(size, alignment); |
| limit &= ~(alignment - 1); |
| |
| if (!base) |
| fixed = false; |
| |
| /* size should be aligned with order_per_bit */ |
| if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit)) |
| return -EINVAL; |
| |
| /* |
| * If allocating at a fixed base the request region must not cross the |
| * low/high memory boundary. |
| */ |
| if (fixed && base < highmem_start && base + size > highmem_start) { |
| ret = -EINVAL; |
| pr_err("Region at %pa defined on low/high memory boundary (%pa)\n", |
| &base, &highmem_start); |
| goto err; |
| } |
| |
| /* |
| * If the limit is unspecified or above the memblock end, its effective |
| * value will be the memblock end. Set it explicitly to simplify further |
| * checks. |
| */ |
| if (limit == 0 || limit > memblock_end) |
| limit = memblock_end; |
| |
| if (base + size > limit) { |
| ret = -EINVAL; |
| pr_err("Size (%pa) of region at %pa exceeds limit (%pa)\n", |
| &size, &base, &limit); |
| goto err; |
| } |
| |
| /* Reserve memory */ |
| if (fixed) { |
| if (memblock_is_region_reserved(base, size) || |
| memblock_reserve(base, size) < 0) { |
| ret = -EBUSY; |
| goto err; |
| } |
| } else { |
| phys_addr_t addr = 0; |
| |
| /* |
| * If there is enough memory, try a bottom-up allocation first. |
| * It will place the new cma area close to the start of the node |
| * and guarantee that the compaction is moving pages out of the |
| * cma area and not into it. |
| * Avoid using first 4GB to not interfere with constrained zones |
| * like DMA/DMA32. |
| */ |
| #ifdef CONFIG_PHYS_ADDR_T_64BIT |
| if (!memblock_bottom_up() && memblock_end >= SZ_4G + size) { |
| memblock_set_bottom_up(true); |
| addr = memblock_alloc_range_nid(size, alignment, SZ_4G, |
| limit, nid, true); |
| memblock_set_bottom_up(false); |
| } |
| #endif |
| |
| /* |
| * All pages in the reserved area must come from the same zone. |
| * If the requested region crosses the low/high memory boundary, |
| * try allocating from high memory first and fall back to low |
| * memory in case of failure. |
| */ |
| if (!addr && base < highmem_start && limit > highmem_start) { |
| addr = memblock_alloc_range_nid(size, alignment, |
| highmem_start, limit, nid, true); |
| limit = highmem_start; |
| } |
| |
| if (!addr) { |
| addr = memblock_alloc_range_nid(size, alignment, base, |
| limit, nid, true); |
| if (!addr) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| } |
| |
| /* |
| * kmemleak scans/reads tracked objects for pointers to other |
| * objects but this address isn't mapped and accessible |
| */ |
| kmemleak_ignore_phys(addr); |
| base = addr; |
| } |
| |
| ret = cma_init_reserved_mem(base, size, order_per_bit, name, res_cma); |
| if (ret) |
| goto free_mem; |
| |
| pr_info("Reserved %ld MiB at %pa on node %d\n", (unsigned long)size / SZ_1M, |
| &base, nid); |
| return 0; |
| |
| free_mem: |
| memblock_phys_free(base, size); |
| err: |
| pr_err("Failed to reserve %ld MiB on node %d\n", (unsigned long)size / SZ_1M, |
| nid); |
| return ret; |
| } |
| |
| #ifdef CONFIG_CMA_DEBUG |
| static void cma_debug_show_areas(struct cma *cma) |
| { |
| unsigned long next_zero_bit, next_set_bit, nr_zero; |
| unsigned long start = 0; |
| unsigned long nr_part, nr_total = 0; |
| unsigned long nbits = cma_bitmap_maxno(cma); |
| |
| spin_lock_irq(&cma->lock); |
| pr_info("number of available pages: "); |
| for (;;) { |
| next_zero_bit = find_next_zero_bit(cma->bitmap, nbits, start); |
| if (next_zero_bit >= nbits) |
| break; |
| next_set_bit = find_next_bit(cma->bitmap, nbits, next_zero_bit); |
| nr_zero = next_set_bit - next_zero_bit; |
| nr_part = nr_zero << cma->order_per_bit; |
| pr_cont("%s%lu@%lu", nr_total ? "+" : "", nr_part, |
| next_zero_bit); |
| nr_total += nr_part; |
| start = next_zero_bit + nr_zero; |
| } |
| pr_cont("=> %lu free of %lu total pages\n", nr_total, cma->count); |
| spin_unlock_irq(&cma->lock); |
| } |
| #else |
| static inline void cma_debug_show_areas(struct cma *cma) { } |
| #endif |
| |
| /** |
| * cma_alloc() - allocate pages from contiguous area |
| * @cma: Contiguous memory region for which the allocation is performed. |
| * @count: Requested number of pages. |
| * @align: Requested alignment of pages (in PAGE_SIZE order). |
| * @no_warn: Avoid printing message about failed allocation |
| * |
| * This function allocates part of contiguous memory on specific |
| * contiguous memory area. |
| */ |
| struct page *cma_alloc(struct cma *cma, unsigned long count, |
| unsigned int align, bool no_warn) |
| { |
| unsigned long mask, offset; |
| unsigned long pfn = -1; |
| unsigned long start = 0; |
| unsigned long bitmap_maxno, bitmap_no, bitmap_count; |
| unsigned long i; |
| struct page *page = NULL; |
| int ret = -ENOMEM; |
| |
| if (!cma || !cma->count || !cma->bitmap) |
| goto out; |
| |
| pr_debug("%s(cma %p, name: %s, count %lu, align %d)\n", __func__, |
| (void *)cma, cma->name, count, align); |
| |
| if (!count) |
| goto out; |
| |
| trace_cma_alloc_start(cma->name, count, align); |
| |
| mask = cma_bitmap_aligned_mask(cma, align); |
| offset = cma_bitmap_aligned_offset(cma, align); |
| bitmap_maxno = cma_bitmap_maxno(cma); |
| bitmap_count = cma_bitmap_pages_to_bits(cma, count); |
| |
| if (bitmap_count > bitmap_maxno) |
| goto out; |
| |
| for (;;) { |
| spin_lock_irq(&cma->lock); |
| bitmap_no = bitmap_find_next_zero_area_off(cma->bitmap, |
| bitmap_maxno, start, bitmap_count, mask, |
| offset); |
| if (bitmap_no >= bitmap_maxno) { |
| spin_unlock_irq(&cma->lock); |
| break; |
| } |
| bitmap_set(cma->bitmap, bitmap_no, bitmap_count); |
| /* |
| * It's safe to drop the lock here. We've marked this region for |
| * our exclusive use. If the migration fails we will take the |
| * lock again and unmark it. |
| */ |
| spin_unlock_irq(&cma->lock); |
| |
| pfn = cma->base_pfn + (bitmap_no << cma->order_per_bit); |
| mutex_lock(&cma_mutex); |
| ret = alloc_contig_range(pfn, pfn + count, MIGRATE_CMA, |
| GFP_KERNEL | (no_warn ? __GFP_NOWARN : 0)); |
| mutex_unlock(&cma_mutex); |
| if (ret == 0) { |
| page = pfn_to_page(pfn); |
| break; |
| } |
| |
| cma_clear_bitmap(cma, pfn, count); |
| if (ret != -EBUSY) |
| break; |
| |
| pr_debug("%s(): memory range at pfn 0x%lx %p is busy, retrying\n", |
| __func__, pfn, pfn_to_page(pfn)); |
| |
| trace_cma_alloc_busy_retry(cma->name, pfn, pfn_to_page(pfn), |
| count, align); |
| /* try again with a bit different memory target */ |
| start = bitmap_no + mask + 1; |
| } |
| |
| trace_cma_alloc_finish(cma->name, pfn, page, count, align, ret); |
| |
| /* |
| * CMA can allocate multiple page blocks, which results in different |
| * blocks being marked with different tags. Reset the tags to ignore |
| * those page blocks. |
| */ |
| if (page) { |
| for (i = 0; i < count; i++) |
| page_kasan_tag_reset(page + i); |
| } |
| |
| if (ret && !no_warn) { |
| pr_err_ratelimited("%s: %s: alloc failed, req-size: %lu pages, ret: %d\n", |
| __func__, cma->name, count, ret); |
| cma_debug_show_areas(cma); |
| } |
| |
| pr_debug("%s(): returned %p\n", __func__, page); |
| out: |
| if (page) { |
| count_vm_event(CMA_ALLOC_SUCCESS); |
| cma_sysfs_account_success_pages(cma, count); |
| } else { |
| count_vm_event(CMA_ALLOC_FAIL); |
| if (cma) |
| cma_sysfs_account_fail_pages(cma, count); |
| } |
| |
| return page; |
| } |
| |
| bool cma_pages_valid(struct cma *cma, const struct page *pages, |
| unsigned long count) |
| { |
| unsigned long pfn; |
| |
| if (!cma || !pages) |
| return false; |
| |
| pfn = page_to_pfn(pages); |
| |
| if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count) { |
| pr_debug("%s(page %p, count %lu)\n", __func__, |
| (void *)pages, count); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * cma_release() - release allocated pages |
| * @cma: Contiguous memory region for which the allocation is performed. |
| * @pages: Allocated pages. |
| * @count: Number of allocated pages. |
| * |
| * This function releases memory allocated by cma_alloc(). |
| * It returns false when provided pages do not belong to contiguous area and |
| * true otherwise. |
| */ |
| bool cma_release(struct cma *cma, const struct page *pages, |
| unsigned long count) |
| { |
| unsigned long pfn; |
| |
| if (!cma_pages_valid(cma, pages, count)) |
| return false; |
| |
| pr_debug("%s(page %p, count %lu)\n", __func__, (void *)pages, count); |
| |
| pfn = page_to_pfn(pages); |
| |
| VM_BUG_ON(pfn + count > cma->base_pfn + cma->count); |
| |
| free_contig_range(pfn, count); |
| cma_clear_bitmap(cma, pfn, count); |
| trace_cma_release(cma->name, pfn, pages, count); |
| |
| return true; |
| } |
| |
| int cma_for_each_area(int (*it)(struct cma *cma, void *data), void *data) |
| { |
| int i; |
| |
| for (i = 0; i < cma_area_count; i++) { |
| int ret = it(&cma_areas[i], data); |
| |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |