| // SPDX-License-Identifier: GPL-2.0+ | 
 | // | 
 | // pv88080-regulator.c - Regulator device driver for PV88080 | 
 | // Copyright (C) 2016  Powerventure Semiconductor Ltd. | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regulator/driver.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/regulator/of_regulator.h> | 
 | #include "pv88080-regulator.h" | 
 |  | 
 | #define PV88080_MAX_REGULATORS	4 | 
 |  | 
 | /* PV88080 REGULATOR IDs */ | 
 | enum { | 
 | 	/* BUCKs */ | 
 | 	PV88080_ID_BUCK1, | 
 | 	PV88080_ID_BUCK2, | 
 | 	PV88080_ID_BUCK3, | 
 | 	PV88080_ID_HVBUCK, | 
 | }; | 
 |  | 
 | enum pv88080_types { | 
 | 	TYPE_PV88080_AA, | 
 | 	TYPE_PV88080_BA, | 
 | }; | 
 |  | 
 | struct pv88080_regulator { | 
 | 	struct regulator_desc desc; | 
 | 	unsigned int mode_reg; | 
 | 	unsigned int conf2; | 
 | 	unsigned int conf5; | 
 | }; | 
 |  | 
 | struct pv88080 { | 
 | 	struct device *dev; | 
 | 	struct regmap *regmap; | 
 | 	struct regulator_dev *rdev[PV88080_MAX_REGULATORS]; | 
 | 	unsigned long type; | 
 | 	const struct pv88080_compatible_regmap *regmap_config; | 
 | }; | 
 |  | 
 | struct pv88080_buck_voltage { | 
 | 	int min_uV; | 
 | 	int max_uV; | 
 | 	int uV_step; | 
 | }; | 
 |  | 
 | struct pv88080_buck_regmap { | 
 | 	/* REGS */ | 
 | 	int buck_enable_reg; | 
 | 	int buck_vsel_reg; | 
 | 	int buck_mode_reg; | 
 | 	int buck_limit_reg; | 
 | 	int buck_vdac_range_reg; | 
 | 	int buck_vrange_gain_reg; | 
 | 	/* MASKS */ | 
 | 	int buck_enable_mask; | 
 | 	int buck_vsel_mask; | 
 | 	int buck_limit_mask; | 
 | }; | 
 |  | 
 | struct pv88080_compatible_regmap { | 
 | 	/* BUCK1, 2, 3 */ | 
 | 	struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1]; | 
 | 	/* HVBUCK */ | 
 | 	int hvbuck_enable_reg; | 
 | 	int hvbuck_vsel_reg; | 
 | 	int hvbuck_enable_mask; | 
 | 	int hvbuck_vsel_mask; | 
 | }; | 
 |  | 
 | static const struct regmap_config pv88080_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | }; | 
 |  | 
 | /* Current limits array (in uA) for BUCK1, BUCK2, BUCK3. | 
 |  * Entry indexes corresponds to register values. | 
 |  */ | 
 |  | 
 | static const unsigned int pv88080_buck1_limits[] = { | 
 | 	3230000, 5130000, 6960000, 8790000 | 
 | }; | 
 |  | 
 | static const unsigned int pv88080_buck23_limits[] = { | 
 | 	1496000, 2393000, 3291000, 4189000 | 
 | }; | 
 |  | 
 | static const struct pv88080_buck_voltage pv88080_buck_vol[2] = { | 
 | 	{ | 
 | 		.min_uV = 600000, | 
 | 		.max_uV = 1393750, | 
 | 		.uV_step = 6250, | 
 | 	}, | 
 | 	{ | 
 | 		.min_uV = 1400000, | 
 | 		.max_uV = 2193750, | 
 | 		.uV_step = 6250, | 
 | 	}, | 
 | }; | 
 |  | 
 | static const struct pv88080_compatible_regmap pv88080_aa_regs = { | 
 | 	/* BUCK1 */ | 
 | 	.buck_regmap[0] = { | 
 | 		.buck_enable_reg      = PV88080AA_REG_BUCK1_CONF0, | 
 | 		.buck_vsel_reg        = PV88080AA_REG_BUCK1_CONF0, | 
 | 		.buck_mode_reg        = PV88080AA_REG_BUCK1_CONF1, | 
 | 		.buck_limit_reg       = PV88080AA_REG_BUCK1_CONF1, | 
 | 		.buck_vdac_range_reg  = PV88080AA_REG_BUCK1_CONF2, | 
 | 		.buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5, | 
 | 		.buck_enable_mask     = PV88080_BUCK1_EN, | 
 | 		.buck_vsel_mask       = PV88080_VBUCK1_MASK, | 
 | 		.buck_limit_mask      = PV88080_BUCK1_ILIM_MASK, | 
 | 	}, | 
 | 	/* BUCK2 */ | 
 | 	.buck_regmap[1] = { | 
 | 		.buck_enable_reg      = PV88080AA_REG_BUCK2_CONF0, | 
 | 		.buck_vsel_reg        = PV88080AA_REG_BUCK2_CONF0, | 
 | 		.buck_mode_reg        = PV88080AA_REG_BUCK2_CONF1, | 
 | 		.buck_limit_reg	      = PV88080AA_REG_BUCK2_CONF1, | 
 | 		.buck_vdac_range_reg  = PV88080AA_REG_BUCK2_CONF2, | 
 | 		.buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5, | 
 | 		.buck_enable_mask	  = PV88080_BUCK2_EN, | 
 | 		.buck_vsel_mask       = PV88080_VBUCK2_MASK, | 
 | 		.buck_limit_mask      = PV88080_BUCK2_ILIM_MASK, | 
 | 	}, | 
 | 	/* BUCK3 */ | 
 | 	.buck_regmap[2] = { | 
 | 		.buck_enable_reg	  = PV88080AA_REG_BUCK3_CONF0, | 
 | 		.buck_vsel_reg        = PV88080AA_REG_BUCK3_CONF0, | 
 | 		.buck_mode_reg        = PV88080AA_REG_BUCK3_CONF1, | 
 | 		.buck_limit_reg	      = PV88080AA_REG_BUCK3_CONF1, | 
 | 		.buck_vdac_range_reg  = PV88080AA_REG_BUCK3_CONF2, | 
 | 		.buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5, | 
 | 		.buck_enable_mask	  = PV88080_BUCK3_EN, | 
 | 		.buck_vsel_mask       = PV88080_VBUCK3_MASK, | 
 | 		.buck_limit_mask      = PV88080_BUCK3_ILIM_MASK, | 
 | 	}, | 
 | 	/* HVBUCK */ | 
 | 	.hvbuck_enable_reg	      = PV88080AA_REG_HVBUCK_CONF2, | 
 | 	.hvbuck_vsel_reg          = PV88080AA_REG_HVBUCK_CONF1, | 
 | 	.hvbuck_enable_mask       = PV88080_HVBUCK_EN, | 
 | 	.hvbuck_vsel_mask         = PV88080_VHVBUCK_MASK, | 
 | }; | 
 |  | 
 | static const struct pv88080_compatible_regmap pv88080_ba_regs = { | 
 | 	/* BUCK1 */ | 
 | 	.buck_regmap[0] = { | 
 | 		.buck_enable_reg	  = PV88080BA_REG_BUCK1_CONF0, | 
 | 		.buck_vsel_reg        = PV88080BA_REG_BUCK1_CONF0, | 
 | 		.buck_mode_reg        = PV88080BA_REG_BUCK1_CONF1, | 
 | 		.buck_limit_reg       = PV88080BA_REG_BUCK1_CONF1, | 
 | 		.buck_vdac_range_reg  = PV88080BA_REG_BUCK1_CONF2, | 
 | 		.buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5, | 
 | 		.buck_enable_mask     = PV88080_BUCK1_EN, | 
 | 		.buck_vsel_mask       = PV88080_VBUCK1_MASK, | 
 | 		.buck_limit_mask	  = PV88080_BUCK1_ILIM_MASK, | 
 | 	}, | 
 | 	/* BUCK2 */ | 
 | 	.buck_regmap[1] = { | 
 | 		.buck_enable_reg	  = PV88080BA_REG_BUCK2_CONF0, | 
 | 		.buck_vsel_reg        = PV88080BA_REG_BUCK2_CONF0, | 
 | 		.buck_mode_reg        = PV88080BA_REG_BUCK2_CONF1, | 
 | 		.buck_limit_reg	      = PV88080BA_REG_BUCK2_CONF1, | 
 | 		.buck_vdac_range_reg  = PV88080BA_REG_BUCK2_CONF2, | 
 | 		.buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5, | 
 | 		.buck_enable_mask	  = PV88080_BUCK2_EN, | 
 | 		.buck_vsel_mask       = PV88080_VBUCK2_MASK, | 
 | 		.buck_limit_mask	  = PV88080_BUCK2_ILIM_MASK, | 
 | 	}, | 
 | 	/* BUCK3 */ | 
 | 	.buck_regmap[2] = { | 
 | 		.buck_enable_reg	  = PV88080BA_REG_BUCK3_CONF0, | 
 | 		.buck_vsel_reg        = PV88080BA_REG_BUCK3_CONF0, | 
 | 		.buck_mode_reg        = PV88080BA_REG_BUCK3_CONF1, | 
 | 		.buck_limit_reg	      = PV88080BA_REG_BUCK3_CONF1, | 
 | 		.buck_vdac_range_reg  = PV88080BA_REG_BUCK3_CONF2, | 
 | 		.buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5, | 
 | 		.buck_enable_mask	  = PV88080_BUCK3_EN, | 
 | 		.buck_vsel_mask       = PV88080_VBUCK3_MASK, | 
 | 		.buck_limit_mask	  = PV88080_BUCK3_ILIM_MASK, | 
 | 	}, | 
 | 	/* HVBUCK */ | 
 | 	.hvbuck_enable_reg	      = PV88080BA_REG_HVBUCK_CONF2, | 
 | 	.hvbuck_vsel_reg          = PV88080BA_REG_HVBUCK_CONF1, | 
 | 	.hvbuck_enable_mask       = PV88080_HVBUCK_EN, | 
 | 	.hvbuck_vsel_mask		  = PV88080_VHVBUCK_MASK, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id pv88080_dt_ids[] = { | 
 | 	{ .compatible = "pvs,pv88080",    .data = (void *)TYPE_PV88080_AA }, | 
 | 	{ .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA }, | 
 | 	{ .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, pv88080_dt_ids); | 
 | #endif | 
 |  | 
 | static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev) | 
 | { | 
 | 	struct pv88080_regulator *info = rdev_get_drvdata(rdev); | 
 | 	unsigned int data; | 
 | 	int ret, mode = 0; | 
 |  | 
 | 	ret = regmap_read(rdev->regmap, info->mode_reg, &data); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	switch (data & PV88080_BUCK1_MODE_MASK) { | 
 | 	case PV88080_BUCK_MODE_SYNC: | 
 | 		mode = REGULATOR_MODE_FAST; | 
 | 		break; | 
 | 	case PV88080_BUCK_MODE_AUTO: | 
 | 		mode = REGULATOR_MODE_NORMAL; | 
 | 		break; | 
 | 	case PV88080_BUCK_MODE_SLEEP: | 
 | 		mode = REGULATOR_MODE_STANDBY; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return mode; | 
 | } | 
 |  | 
 | static int pv88080_buck_set_mode(struct regulator_dev *rdev, | 
 | 					unsigned int mode) | 
 | { | 
 | 	struct pv88080_regulator *info = rdev_get_drvdata(rdev); | 
 | 	int val = 0; | 
 |  | 
 | 	switch (mode) { | 
 | 	case REGULATOR_MODE_FAST: | 
 | 		val = PV88080_BUCK_MODE_SYNC; | 
 | 		break; | 
 | 	case REGULATOR_MODE_NORMAL: | 
 | 		val = PV88080_BUCK_MODE_AUTO; | 
 | 		break; | 
 | 	case REGULATOR_MODE_STANDBY: | 
 | 		val = PV88080_BUCK_MODE_SLEEP; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return regmap_update_bits(rdev->regmap, info->mode_reg, | 
 | 					PV88080_BUCK1_MODE_MASK, val); | 
 | } | 
 |  | 
 | static const struct regulator_ops pv88080_buck_ops = { | 
 | 	.get_mode = pv88080_buck_get_mode, | 
 | 	.set_mode = pv88080_buck_set_mode, | 
 | 	.enable = regulator_enable_regmap, | 
 | 	.disable = regulator_disable_regmap, | 
 | 	.is_enabled = regulator_is_enabled_regmap, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | 	.set_current_limit = regulator_set_current_limit_regmap, | 
 | 	.get_current_limit = regulator_get_current_limit_regmap, | 
 | }; | 
 |  | 
 | static const struct regulator_ops pv88080_hvbuck_ops = { | 
 | 	.enable = regulator_enable_regmap, | 
 | 	.disable = regulator_disable_regmap, | 
 | 	.is_enabled = regulator_is_enabled_regmap, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | }; | 
 |  | 
 | #define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \ | 
 | {\ | 
 | 	.desc	=	{\ | 
 | 		.id = chip##_ID_##regl_name,\ | 
 | 		.name = __stringify(chip##_##regl_name),\ | 
 | 		.of_match = of_match_ptr(#regl_name),\ | 
 | 		.regulators_node = of_match_ptr("regulators"),\ | 
 | 		.type = REGULATOR_VOLTAGE,\ | 
 | 		.owner = THIS_MODULE,\ | 
 | 		.ops = &pv88080_buck_ops,\ | 
 | 		.min_uV = min, \ | 
 | 		.uV_step = step, \ | 
 | 		.n_voltages = ((max) - (min))/(step) + 1, \ | 
 | 		.curr_table = limits_array, \ | 
 | 		.n_current_limits = ARRAY_SIZE(limits_array), \ | 
 | 	},\ | 
 | } | 
 |  | 
 | #define PV88080_HVBUCK(chip, regl_name, min, step, max) \ | 
 | {\ | 
 | 	.desc	=	{\ | 
 | 		.id = chip##_ID_##regl_name,\ | 
 | 		.name = __stringify(chip##_##regl_name),\ | 
 | 		.of_match = of_match_ptr(#regl_name),\ | 
 | 		.regulators_node = of_match_ptr("regulators"),\ | 
 | 		.type = REGULATOR_VOLTAGE,\ | 
 | 		.owner = THIS_MODULE,\ | 
 | 		.ops = &pv88080_hvbuck_ops,\ | 
 | 		.min_uV = min, \ | 
 | 		.uV_step = step, \ | 
 | 		.n_voltages = ((max) - (min))/(step) + 1, \ | 
 | 	},\ | 
 | } | 
 |  | 
 | static struct pv88080_regulator pv88080_regulator_info[] = { | 
 | 	PV88080_BUCK(PV88080, BUCK1, 600000, 6250, 1393750, | 
 | 		pv88080_buck1_limits), | 
 | 	PV88080_BUCK(PV88080, BUCK2, 600000, 6250, 1393750, | 
 | 		pv88080_buck23_limits), | 
 | 	PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750, | 
 | 		pv88080_buck23_limits), | 
 | 	PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000), | 
 | }; | 
 |  | 
 | static irqreturn_t pv88080_irq_handler(int irq, void *data) | 
 | { | 
 | 	struct pv88080 *chip = data; | 
 | 	int i, reg_val, err, ret = IRQ_NONE; | 
 |  | 
 | 	err = regmap_read(chip->regmap, PV88080_REG_EVENT_A, ®_val); | 
 | 	if (err < 0) | 
 | 		goto error_i2c; | 
 |  | 
 | 	if (reg_val & PV88080_E_VDD_FLT) { | 
 | 		for (i = 0; i < PV88080_MAX_REGULATORS; i++) { | 
 | 			if (chip->rdev[i] != NULL) | 
 | 				regulator_notifier_call_chain(chip->rdev[i], | 
 | 					REGULATOR_EVENT_UNDER_VOLTAGE, | 
 | 					NULL); | 
 | 		} | 
 |  | 
 | 		err = regmap_write(chip->regmap, PV88080_REG_EVENT_A, | 
 | 			PV88080_E_VDD_FLT); | 
 | 		if (err < 0) | 
 | 			goto error_i2c; | 
 |  | 
 | 		ret = IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	if (reg_val & PV88080_E_OVER_TEMP) { | 
 | 		for (i = 0; i < PV88080_MAX_REGULATORS; i++) { | 
 | 			if (chip->rdev[i] != NULL) | 
 | 				regulator_notifier_call_chain(chip->rdev[i], | 
 | 					REGULATOR_EVENT_OVER_TEMP, | 
 | 					NULL); | 
 | 		} | 
 |  | 
 | 		err = regmap_write(chip->regmap, PV88080_REG_EVENT_A, | 
 | 			PV88080_E_OVER_TEMP); | 
 | 		if (err < 0) | 
 | 			goto error_i2c; | 
 |  | 
 | 		ret = IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 |  | 
 | error_i2c: | 
 | 	dev_err(chip->dev, "I2C error : %d\n", err); | 
 | 	return IRQ_NONE; | 
 | } | 
 |  | 
 | /* | 
 |  * I2C driver interface functions | 
 |  */ | 
 | static int pv88080_i2c_probe(struct i2c_client *i2c) | 
 | { | 
 | 	const struct i2c_device_id *id = i2c_client_get_device_id(i2c); | 
 | 	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); | 
 | 	struct pv88080 *chip; | 
 | 	const struct pv88080_compatible_regmap *regmap_config; | 
 | 	const struct of_device_id *match; | 
 | 	struct regulator_config config = { }; | 
 | 	int i, error, ret; | 
 | 	unsigned int conf2, conf5; | 
 |  | 
 | 	chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88080), GFP_KERNEL); | 
 | 	if (!chip) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	chip->dev = &i2c->dev; | 
 | 	chip->regmap = devm_regmap_init_i2c(i2c, &pv88080_regmap_config); | 
 | 	if (IS_ERR(chip->regmap)) { | 
 | 		error = PTR_ERR(chip->regmap); | 
 | 		dev_err(chip->dev, "Failed to allocate register map: %d\n", | 
 | 			error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	if (i2c->dev.of_node) { | 
 | 		match = of_match_node(pv88080_dt_ids, i2c->dev.of_node); | 
 | 		if (!match) { | 
 | 			dev_err(chip->dev, "Failed to get of_match_node\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		chip->type = (unsigned long)match->data; | 
 | 	} else { | 
 | 		chip->type = id->driver_data; | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(i2c, chip); | 
 |  | 
 | 	if (i2c->irq != 0) { | 
 | 		ret = regmap_write(chip->regmap, PV88080_REG_MASK_A, 0xFF); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to mask A reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 | 		ret = regmap_write(chip->regmap, PV88080_REG_MASK_B, 0xFF); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to mask B reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 | 		ret = regmap_write(chip->regmap, PV88080_REG_MASK_C, 0xFF); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to mask C reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, | 
 | 					pv88080_irq_handler, | 
 | 					IRQF_TRIGGER_LOW|IRQF_ONESHOT, | 
 | 					"pv88080", chip); | 
 | 		if (ret != 0) { | 
 | 			dev_err(chip->dev, "Failed to request IRQ: %d\n", | 
 | 				i2c->irq); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		ret = regmap_update_bits(chip->regmap, PV88080_REG_MASK_A, | 
 | 			PV88080_M_VDD_FLT | PV88080_M_OVER_TEMP, 0); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to update mask reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 | 	} else { | 
 | 		dev_warn(chip->dev, "No IRQ configured\n"); | 
 | 	} | 
 |  | 
 | 	switch (chip->type) { | 
 | 	case TYPE_PV88080_AA: | 
 | 		chip->regmap_config = &pv88080_aa_regs; | 
 | 		break; | 
 | 	case TYPE_PV88080_BA: | 
 | 		chip->regmap_config = &pv88080_ba_regs; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	regmap_config = chip->regmap_config; | 
 | 	config.dev = chip->dev; | 
 | 	config.regmap = chip->regmap; | 
 |  | 
 | 	/* Registeration for BUCK1, 2, 3 */ | 
 | 	for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) { | 
 | 		if (init_data) | 
 | 			config.init_data = &init_data[i]; | 
 |  | 
 | 		pv88080_regulator_info[i].desc.csel_reg | 
 | 			= regmap_config->buck_regmap[i].buck_limit_reg; | 
 | 		pv88080_regulator_info[i].desc.csel_mask | 
 | 			= regmap_config->buck_regmap[i].buck_limit_mask; | 
 | 		pv88080_regulator_info[i].mode_reg | 
 | 			= regmap_config->buck_regmap[i].buck_mode_reg; | 
 | 		pv88080_regulator_info[i].conf2 | 
 | 			= regmap_config->buck_regmap[i].buck_vdac_range_reg; | 
 | 		pv88080_regulator_info[i].conf5 | 
 | 			= regmap_config->buck_regmap[i].buck_vrange_gain_reg; | 
 | 		pv88080_regulator_info[i].desc.enable_reg | 
 | 			= regmap_config->buck_regmap[i].buck_enable_reg; | 
 | 		pv88080_regulator_info[i].desc.enable_mask | 
 | 			= regmap_config->buck_regmap[i].buck_enable_mask; | 
 | 		pv88080_regulator_info[i].desc.vsel_reg | 
 | 			= regmap_config->buck_regmap[i].buck_vsel_reg; | 
 | 		pv88080_regulator_info[i].desc.vsel_mask | 
 | 			= regmap_config->buck_regmap[i].buck_vsel_mask; | 
 |  | 
 | 		ret = regmap_read(chip->regmap, | 
 | 				pv88080_regulator_info[i].conf2, &conf2); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) & | 
 | 			PV88080_BUCK_VDAC_RANGE_MASK); | 
 |  | 
 | 		ret = regmap_read(chip->regmap, | 
 | 				pv88080_regulator_info[i].conf5, &conf5); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) & | 
 | 			PV88080_BUCK_VRANGE_GAIN_MASK); | 
 |  | 
 | 		pv88080_regulator_info[i].desc.min_uV = | 
 | 			pv88080_buck_vol[conf2].min_uV * (conf5+1); | 
 | 		pv88080_regulator_info[i].desc.uV_step = | 
 | 			pv88080_buck_vol[conf2].uV_step * (conf5+1); | 
 | 		pv88080_regulator_info[i].desc.n_voltages = | 
 | 			((pv88080_buck_vol[conf2].max_uV * (conf5+1)) | 
 | 			- (pv88080_regulator_info[i].desc.min_uV)) | 
 | 			/(pv88080_regulator_info[i].desc.uV_step) + 1; | 
 |  | 
 | 		config.driver_data = (void *)&pv88080_regulator_info[i]; | 
 | 		chip->rdev[i] = devm_regulator_register(chip->dev, | 
 | 			&pv88080_regulator_info[i].desc, &config); | 
 | 		if (IS_ERR(chip->rdev[i])) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to register PV88080 regulator\n"); | 
 | 			return PTR_ERR(chip->rdev[i]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg | 
 | 		= regmap_config->hvbuck_enable_reg; | 
 | 	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask | 
 | 		= regmap_config->hvbuck_enable_mask; | 
 | 	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg | 
 | 		= regmap_config->hvbuck_vsel_reg; | 
 | 	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask | 
 | 		= regmap_config->hvbuck_vsel_mask; | 
 |  | 
 | 	/* Registeration for HVBUCK */ | 
 | 	if (init_data) | 
 | 		config.init_data = &init_data[PV88080_ID_HVBUCK]; | 
 |  | 
 | 	config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK]; | 
 | 	chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev, | 
 | 		&pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config); | 
 | 	if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) { | 
 | 		dev_err(chip->dev, "Failed to register PV88080 regulator\n"); | 
 | 		return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id pv88080_i2c_id[] = { | 
 | 	{ "pv88080",    TYPE_PV88080_AA }, | 
 | 	{ "pv88080-aa", TYPE_PV88080_AA }, | 
 | 	{ "pv88080-ba", TYPE_PV88080_BA }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id); | 
 |  | 
 | static struct i2c_driver pv88080_regulator_driver = { | 
 | 	.driver = { | 
 | 		.name = "pv88080", | 
 | 		.probe_type = PROBE_PREFER_ASYNCHRONOUS, | 
 | 		.of_match_table = of_match_ptr(pv88080_dt_ids), | 
 | 	}, | 
 | 	.probe = pv88080_i2c_probe, | 
 | 	.id_table = pv88080_i2c_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(pv88080_regulator_driver); | 
 |  | 
 | MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); | 
 | MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88080"); | 
 | MODULE_LICENSE("GPL"); |