| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * R-Car Gen3 THS thermal sensor driver |
| * Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen. |
| * |
| * Copyright (C) 2016 Renesas Electronics Corporation. |
| * Copyright (C) 2016 Sang Engineering |
| */ |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/thermal.h> |
| |
| #include "thermal_hwmon.h" |
| |
| /* Register offsets */ |
| #define REG_GEN3_IRQSTR 0x04 |
| #define REG_GEN3_IRQMSK 0x08 |
| #define REG_GEN3_IRQCTL 0x0C |
| #define REG_GEN3_IRQEN 0x10 |
| #define REG_GEN3_IRQTEMP1 0x14 |
| #define REG_GEN3_IRQTEMP2 0x18 |
| #define REG_GEN3_IRQTEMP3 0x1C |
| #define REG_GEN3_THCTR 0x20 |
| #define REG_GEN3_TEMP 0x28 |
| #define REG_GEN3_THCODE1 0x50 |
| #define REG_GEN3_THCODE2 0x54 |
| #define REG_GEN3_THCODE3 0x58 |
| #define REG_GEN3_PTAT1 0x5c |
| #define REG_GEN3_PTAT2 0x60 |
| #define REG_GEN3_PTAT3 0x64 |
| #define REG_GEN3_THSCP 0x68 |
| #define REG_GEN4_THSFMON00 0x180 |
| #define REG_GEN4_THSFMON01 0x184 |
| #define REG_GEN4_THSFMON02 0x188 |
| #define REG_GEN4_THSFMON15 0x1BC |
| #define REG_GEN4_THSFMON16 0x1C0 |
| #define REG_GEN4_THSFMON17 0x1C4 |
| |
| /* IRQ{STR,MSK,EN} bits */ |
| #define IRQ_TEMP1 BIT(0) |
| #define IRQ_TEMP2 BIT(1) |
| #define IRQ_TEMP3 BIT(2) |
| #define IRQ_TEMPD1 BIT(3) |
| #define IRQ_TEMPD2 BIT(4) |
| #define IRQ_TEMPD3 BIT(5) |
| |
| /* THCTR bits */ |
| #define THCTR_PONM BIT(6) |
| #define THCTR_THSST BIT(0) |
| |
| /* THSCP bits */ |
| #define THSCP_COR_PARA_VLD (BIT(15) | BIT(14)) |
| |
| #define CTEMP_MASK 0xFFF |
| |
| #define MCELSIUS(temp) ((temp) * 1000) |
| #define GEN3_FUSE_MASK 0xFFF |
| #define GEN4_FUSE_MASK 0xFFF |
| |
| #define TSC_MAX_NUM 5 |
| |
| /* Structure for thermal temperature calculation */ |
| struct equation_coefs { |
| int a1; |
| int b1; |
| int a2; |
| int b2; |
| }; |
| |
| struct rcar_gen3_thermal_priv; |
| |
| struct rcar_thermal_info { |
| int ths_tj_1; |
| void (*read_fuses)(struct rcar_gen3_thermal_priv *priv); |
| }; |
| |
| struct rcar_gen3_thermal_tsc { |
| void __iomem *base; |
| struct thermal_zone_device *zone; |
| struct equation_coefs coef; |
| int tj_t; |
| int thcode[3]; |
| }; |
| |
| struct rcar_gen3_thermal_priv { |
| struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; |
| struct thermal_zone_device_ops ops; |
| unsigned int num_tscs; |
| int ptat[3]; |
| const struct rcar_thermal_info *info; |
| }; |
| |
| static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc, |
| u32 reg) |
| { |
| return ioread32(tsc->base + reg); |
| } |
| |
| static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc, |
| u32 reg, u32 data) |
| { |
| iowrite32(data, tsc->base + reg); |
| } |
| |
| /* |
| * Linear approximation for temperature |
| * |
| * [reg] = [temp] * a + b => [temp] = ([reg] - b) / a |
| * |
| * The constants a and b are calculated using two triplets of int values PTAT |
| * and THCODE. PTAT and THCODE can either be read from hardware or use hard |
| * coded values from driver. The formula to calculate a and b are taken from |
| * BSP and sparsely documented and understood. |
| * |
| * Examining the linear formula and the formula used to calculate constants a |
| * and b while knowing that the span for PTAT and THCODE values are between |
| * 0x000 and 0xfff the largest integer possible is 0xfff * 0xfff == 0xffe001. |
| * Integer also needs to be signed so that leaves 7 bits for binary |
| * fixed point scaling. |
| */ |
| |
| #define FIXPT_SHIFT 7 |
| #define FIXPT_INT(_x) ((_x) << FIXPT_SHIFT) |
| #define INT_FIXPT(_x) ((_x) >> FIXPT_SHIFT) |
| #define FIXPT_DIV(_a, _b) DIV_ROUND_CLOSEST(((_a) << FIXPT_SHIFT), (_b)) |
| #define FIXPT_TO_MCELSIUS(_x) ((_x) * 1000 >> FIXPT_SHIFT) |
| |
| #define RCAR3_THERMAL_GRAN 500 /* mili Celsius */ |
| |
| /* no idea where these constants come from */ |
| #define TJ_3 -41 |
| |
| static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv, |
| struct rcar_gen3_thermal_tsc *tsc, |
| int ths_tj_1) |
| { |
| /* TODO: Find documentation and document constant calculation formula */ |
| |
| /* |
| * Division is not scaled in BSP and if scaled it might overflow |
| * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled |
| */ |
| tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3)) |
| / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3); |
| |
| tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[2]), |
| tsc->tj_t - FIXPT_INT(TJ_3)); |
| tsc->coef.b1 = FIXPT_INT(tsc->thcode[2]) - tsc->coef.a1 * TJ_3; |
| |
| tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[0]), |
| tsc->tj_t - FIXPT_INT(ths_tj_1)); |
| tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * ths_tj_1; |
| } |
| |
| static int rcar_gen3_thermal_round(int temp) |
| { |
| int result, round_offs; |
| |
| round_offs = temp >= 0 ? RCAR3_THERMAL_GRAN / 2 : |
| -RCAR3_THERMAL_GRAN / 2; |
| result = (temp + round_offs) / RCAR3_THERMAL_GRAN; |
| return result * RCAR3_THERMAL_GRAN; |
| } |
| |
| static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp) |
| { |
| struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz); |
| int mcelsius, val; |
| int reg; |
| |
| /* Read register and convert to mili Celsius */ |
| reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; |
| |
| if (reg <= tsc->thcode[1]) |
| val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, |
| tsc->coef.a1); |
| else |
| val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2, |
| tsc->coef.a2); |
| mcelsius = FIXPT_TO_MCELSIUS(val); |
| |
| /* Guaranteed operating range is -40C to 125C. */ |
| |
| /* Round value to device granularity setting */ |
| *temp = rcar_gen3_thermal_round(mcelsius); |
| |
| return 0; |
| } |
| |
| static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc, |
| int mcelsius) |
| { |
| int celsius, val; |
| |
| celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); |
| if (celsius <= INT_FIXPT(tsc->tj_t)) |
| val = celsius * tsc->coef.a1 + tsc->coef.b1; |
| else |
| val = celsius * tsc->coef.a2 + tsc->coef.b2; |
| |
| return INT_FIXPT(val); |
| } |
| |
| static int rcar_gen3_thermal_set_trips(struct thermal_zone_device *tz, int low, int high) |
| { |
| struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz); |
| u32 irqmsk = 0; |
| |
| if (low != -INT_MAX) { |
| irqmsk |= IRQ_TEMPD1; |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, |
| rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); |
| } |
| |
| if (high != INT_MAX) { |
| irqmsk |= IRQ_TEMP2; |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, |
| rcar_gen3_thermal_mcelsius_to_temp(tsc, high)); |
| } |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, irqmsk); |
| |
| return 0; |
| } |
| |
| static const struct thermal_zone_device_ops rcar_gen3_tz_of_ops = { |
| .get_temp = rcar_gen3_thermal_get_temp, |
| .set_trips = rcar_gen3_thermal_set_trips, |
| }; |
| |
| static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data) |
| { |
| struct rcar_gen3_thermal_priv *priv = data; |
| unsigned int i; |
| u32 status; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR); |
| rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0); |
| if (status && priv->tscs[i]->zone) |
| thermal_zone_device_update(priv->tscs[i]->zone, |
| THERMAL_EVENT_UNSPECIFIED); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void rcar_gen3_thermal_read_fuses_gen3(struct rcar_gen3_thermal_priv *priv) |
| { |
| unsigned int i; |
| |
| /* |
| * Set the pseudo calibration points with fused values. |
| * PTAT is shared between all TSCs but only fused for the first |
| * TSC while THCODEs are fused for each TSC. |
| */ |
| priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) & |
| GEN3_FUSE_MASK; |
| priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) & |
| GEN3_FUSE_MASK; |
| priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) & |
| GEN3_FUSE_MASK; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; |
| |
| tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) & |
| GEN3_FUSE_MASK; |
| tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) & |
| GEN3_FUSE_MASK; |
| tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) & |
| GEN3_FUSE_MASK; |
| } |
| } |
| |
| static void rcar_gen3_thermal_read_fuses_gen4(struct rcar_gen3_thermal_priv *priv) |
| { |
| unsigned int i; |
| |
| /* |
| * Set the pseudo calibration points with fused values. |
| * PTAT is shared between all TSCs but only fused for the first |
| * TSC while THCODEs are fused for each TSC. |
| */ |
| priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON16) & |
| GEN4_FUSE_MASK; |
| priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON17) & |
| GEN4_FUSE_MASK; |
| priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON15) & |
| GEN4_FUSE_MASK; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; |
| |
| tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON01) & |
| GEN4_FUSE_MASK; |
| tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON02) & |
| GEN4_FUSE_MASK; |
| tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON00) & |
| GEN4_FUSE_MASK; |
| } |
| } |
| |
| static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv) |
| { |
| unsigned int i; |
| u32 thscp; |
| |
| /* If fuses are not set, fallback to pseudo values. */ |
| thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP); |
| if (!priv->info->read_fuses || |
| (thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) { |
| /* Default THCODE values in case FUSEs are not set. */ |
| static const int thcodes[TSC_MAX_NUM][3] = { |
| { 3397, 2800, 2221 }, |
| { 3393, 2795, 2216 }, |
| { 3389, 2805, 2237 }, |
| { 3415, 2694, 2195 }, |
| { 3356, 2724, 2244 }, |
| }; |
| |
| priv->ptat[0] = 2631; |
| priv->ptat[1] = 1509; |
| priv->ptat[2] = 435; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; |
| |
| tsc->thcode[0] = thcodes[i][0]; |
| tsc->thcode[1] = thcodes[i][1]; |
| tsc->thcode[2] = thcodes[i][2]; |
| } |
| |
| return false; |
| } |
| |
| priv->info->read_fuses(priv); |
| return true; |
| } |
| |
| static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv, |
| struct rcar_gen3_thermal_tsc *tsc) |
| { |
| u32 reg_val; |
| |
| reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); |
| reg_val &= ~THCTR_PONM; |
| rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); |
| |
| usleep_range(1000, 2000); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0); |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); |
| if (priv->ops.set_trips) |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, |
| IRQ_TEMPD1 | IRQ_TEMP2); |
| |
| reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); |
| reg_val |= THCTR_THSST; |
| rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); |
| |
| usleep_range(1000, 2000); |
| } |
| |
| static const struct rcar_thermal_info rcar_m3w_thermal_info = { |
| .ths_tj_1 = 116, |
| .read_fuses = rcar_gen3_thermal_read_fuses_gen3, |
| }; |
| |
| static const struct rcar_thermal_info rcar_gen3_thermal_info = { |
| .ths_tj_1 = 126, |
| .read_fuses = rcar_gen3_thermal_read_fuses_gen3, |
| }; |
| |
| static const struct rcar_thermal_info rcar_gen4_thermal_info = { |
| .ths_tj_1 = 126, |
| .read_fuses = rcar_gen3_thermal_read_fuses_gen4, |
| }; |
| |
| static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { |
| { |
| .compatible = "renesas,r8a774a1-thermal", |
| .data = &rcar_m3w_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a774b1-thermal", |
| .data = &rcar_gen3_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a774e1-thermal", |
| .data = &rcar_gen3_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a7795-thermal", |
| .data = &rcar_gen3_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a7796-thermal", |
| .data = &rcar_m3w_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a77961-thermal", |
| .data = &rcar_m3w_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a77965-thermal", |
| .data = &rcar_gen3_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a77980-thermal", |
| .data = &rcar_gen3_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a779a0-thermal", |
| .data = &rcar_gen3_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a779f0-thermal", |
| .data = &rcar_gen4_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a779g0-thermal", |
| .data = &rcar_gen4_thermal_info, |
| }, |
| { |
| .compatible = "renesas,r8a779h0-thermal", |
| .data = &rcar_gen4_thermal_info, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids); |
| |
| static void rcar_gen3_thermal_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| |
| pm_runtime_put(dev); |
| pm_runtime_disable(dev); |
| } |
| |
| static void rcar_gen3_hwmon_action(void *data) |
| { |
| struct thermal_zone_device *zone = data; |
| |
| thermal_remove_hwmon_sysfs(zone); |
| } |
| |
| static int rcar_gen3_thermal_request_irqs(struct rcar_gen3_thermal_priv *priv, |
| struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| unsigned int i; |
| char *irqname; |
| int ret, irq; |
| |
| for (i = 0; i < 2; i++) { |
| irq = platform_get_irq_optional(pdev, i); |
| if (irq < 0) |
| return irq; |
| |
| irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d", |
| dev_name(dev), i); |
| if (!irqname) |
| return -ENOMEM; |
| |
| ret = devm_request_threaded_irq(dev, irq, NULL, |
| rcar_gen3_thermal_irq, |
| IRQF_ONESHOT, irqname, priv); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rcar_gen3_thermal_probe(struct platform_device *pdev) |
| { |
| struct rcar_gen3_thermal_priv *priv; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct thermal_zone_device *zone; |
| unsigned int i; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->ops = rcar_gen3_tz_of_ops; |
| |
| priv->info = of_device_get_match_data(dev); |
| platform_set_drvdata(pdev, priv); |
| |
| if (rcar_gen3_thermal_request_irqs(priv, pdev)) |
| priv->ops.set_trips = NULL; |
| |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| |
| for (i = 0; i < TSC_MAX_NUM; i++) { |
| struct rcar_gen3_thermal_tsc *tsc; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, i); |
| if (!res) |
| break; |
| |
| tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL); |
| if (!tsc) { |
| ret = -ENOMEM; |
| goto error_unregister; |
| } |
| |
| tsc->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(tsc->base)) { |
| ret = PTR_ERR(tsc->base); |
| goto error_unregister; |
| } |
| |
| priv->tscs[i] = tsc; |
| } |
| |
| priv->num_tscs = i; |
| |
| if (!rcar_gen3_thermal_read_fuses(priv)) |
| dev_info(dev, "No calibration values fused, fallback to driver values\n"); |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; |
| |
| rcar_gen3_thermal_init(priv, tsc); |
| rcar_gen3_thermal_calc_coefs(priv, tsc, priv->info->ths_tj_1); |
| |
| zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops); |
| if (IS_ERR(zone)) { |
| dev_err(dev, "Sensor %u: Can't register thermal zone\n", i); |
| ret = PTR_ERR(zone); |
| goto error_unregister; |
| } |
| tsc->zone = zone; |
| |
| ret = thermal_add_hwmon_sysfs(tsc->zone); |
| if (ret) |
| goto error_unregister; |
| |
| ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone); |
| if (ret) |
| goto error_unregister; |
| |
| ret = thermal_zone_get_num_trips(tsc->zone); |
| if (ret < 0) |
| goto error_unregister; |
| |
| dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret); |
| } |
| |
| if (!priv->num_tscs) { |
| ret = -ENODEV; |
| goto error_unregister; |
| } |
| |
| return 0; |
| |
| error_unregister: |
| rcar_gen3_thermal_remove(pdev); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev) |
| { |
| struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); |
| unsigned int i; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; |
| |
| rcar_gen3_thermal_init(priv, tsc); |
| } |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, NULL, |
| rcar_gen3_thermal_resume); |
| |
| static struct platform_driver rcar_gen3_thermal_driver = { |
| .driver = { |
| .name = "rcar_gen3_thermal", |
| .pm = &rcar_gen3_thermal_pm_ops, |
| .of_match_table = rcar_gen3_thermal_dt_ids, |
| }, |
| .probe = rcar_gen3_thermal_probe, |
| .remove_new = rcar_gen3_thermal_remove, |
| }; |
| module_platform_driver(rcar_gen3_thermal_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver"); |
| MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>"); |