| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE |
| * Copyright (C) 2016 - 2020 Christoph Hellwig |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/kmod.h> |
| #include <linux/major.h> |
| #include <linux/device_cgroup.h> |
| #include <linux/blkdev.h> |
| #include <linux/blk-integrity.h> |
| #include <linux/backing-dev.h> |
| #include <linux/module.h> |
| #include <linux/blkpg.h> |
| #include <linux/magic.h> |
| #include <linux/buffer_head.h> |
| #include <linux/swap.h> |
| #include <linux/writeback.h> |
| #include <linux/mount.h> |
| #include <linux/pseudo_fs.h> |
| #include <linux/uio.h> |
| #include <linux/namei.h> |
| #include <linux/security.h> |
| #include <linux/part_stat.h> |
| #include <linux/uaccess.h> |
| #include <linux/stat.h> |
| #include "../fs/internal.h" |
| #include "blk.h" |
| |
| /* Should we allow writing to mounted block devices? */ |
| static bool bdev_allow_write_mounted = IS_ENABLED(CONFIG_BLK_DEV_WRITE_MOUNTED); |
| |
| struct bdev_inode { |
| struct block_device bdev; |
| struct inode vfs_inode; |
| }; |
| |
| static inline struct bdev_inode *BDEV_I(struct inode *inode) |
| { |
| return container_of(inode, struct bdev_inode, vfs_inode); |
| } |
| |
| static inline struct inode *BD_INODE(struct block_device *bdev) |
| { |
| return &container_of(bdev, struct bdev_inode, bdev)->vfs_inode; |
| } |
| |
| struct block_device *I_BDEV(struct inode *inode) |
| { |
| return &BDEV_I(inode)->bdev; |
| } |
| EXPORT_SYMBOL(I_BDEV); |
| |
| struct block_device *file_bdev(struct file *bdev_file) |
| { |
| return I_BDEV(bdev_file->f_mapping->host); |
| } |
| EXPORT_SYMBOL(file_bdev); |
| |
| static void bdev_write_inode(struct block_device *bdev) |
| { |
| struct inode *inode = BD_INODE(bdev); |
| int ret; |
| |
| spin_lock(&inode->i_lock); |
| while (inode->i_state & I_DIRTY) { |
| spin_unlock(&inode->i_lock); |
| ret = write_inode_now(inode, true); |
| if (ret) |
| pr_warn_ratelimited( |
| "VFS: Dirty inode writeback failed for block device %pg (err=%d).\n", |
| bdev, ret); |
| spin_lock(&inode->i_lock); |
| } |
| spin_unlock(&inode->i_lock); |
| } |
| |
| /* Kill _all_ buffers and pagecache , dirty or not.. */ |
| static void kill_bdev(struct block_device *bdev) |
| { |
| struct address_space *mapping = bdev->bd_mapping; |
| |
| if (mapping_empty(mapping)) |
| return; |
| |
| invalidate_bh_lrus(); |
| truncate_inode_pages(mapping, 0); |
| } |
| |
| /* Invalidate clean unused buffers and pagecache. */ |
| void invalidate_bdev(struct block_device *bdev) |
| { |
| struct address_space *mapping = bdev->bd_mapping; |
| |
| if (mapping->nrpages) { |
| invalidate_bh_lrus(); |
| lru_add_drain_all(); /* make sure all lru add caches are flushed */ |
| invalidate_mapping_pages(mapping, 0, -1); |
| } |
| } |
| EXPORT_SYMBOL(invalidate_bdev); |
| |
| /* |
| * Drop all buffers & page cache for given bdev range. This function bails |
| * with error if bdev has other exclusive owner (such as filesystem). |
| */ |
| int truncate_bdev_range(struct block_device *bdev, blk_mode_t mode, |
| loff_t lstart, loff_t lend) |
| { |
| /* |
| * If we don't hold exclusive handle for the device, upgrade to it |
| * while we discard the buffer cache to avoid discarding buffers |
| * under live filesystem. |
| */ |
| if (!(mode & BLK_OPEN_EXCL)) { |
| int err = bd_prepare_to_claim(bdev, truncate_bdev_range, NULL); |
| if (err) |
| goto invalidate; |
| } |
| |
| truncate_inode_pages_range(bdev->bd_mapping, lstart, lend); |
| if (!(mode & BLK_OPEN_EXCL)) |
| bd_abort_claiming(bdev, truncate_bdev_range); |
| return 0; |
| |
| invalidate: |
| /* |
| * Someone else has handle exclusively open. Try invalidating instead. |
| * The 'end' argument is inclusive so the rounding is safe. |
| */ |
| return invalidate_inode_pages2_range(bdev->bd_mapping, |
| lstart >> PAGE_SHIFT, |
| lend >> PAGE_SHIFT); |
| } |
| |
| static void set_init_blocksize(struct block_device *bdev) |
| { |
| unsigned int bsize = bdev_logical_block_size(bdev); |
| loff_t size = i_size_read(BD_INODE(bdev)); |
| |
| while (bsize < PAGE_SIZE) { |
| if (size & bsize) |
| break; |
| bsize <<= 1; |
| } |
| BD_INODE(bdev)->i_blkbits = blksize_bits(bsize); |
| } |
| |
| int set_blocksize(struct file *file, int size) |
| { |
| struct inode *inode = file->f_mapping->host; |
| struct block_device *bdev = I_BDEV(inode); |
| |
| /* Size must be a power of two, and between 512 and PAGE_SIZE */ |
| if (size > PAGE_SIZE || size < 512 || !is_power_of_2(size)) |
| return -EINVAL; |
| |
| /* Size cannot be smaller than the size supported by the device */ |
| if (size < bdev_logical_block_size(bdev)) |
| return -EINVAL; |
| |
| if (!file->private_data) |
| return -EINVAL; |
| |
| /* Don't change the size if it is same as current */ |
| if (inode->i_blkbits != blksize_bits(size)) { |
| sync_blockdev(bdev); |
| inode->i_blkbits = blksize_bits(size); |
| kill_bdev(bdev); |
| } |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(set_blocksize); |
| |
| int sb_set_blocksize(struct super_block *sb, int size) |
| { |
| if (set_blocksize(sb->s_bdev_file, size)) |
| return 0; |
| /* If we get here, we know size is power of two |
| * and it's value is between 512 and PAGE_SIZE */ |
| sb->s_blocksize = size; |
| sb->s_blocksize_bits = blksize_bits(size); |
| return sb->s_blocksize; |
| } |
| |
| EXPORT_SYMBOL(sb_set_blocksize); |
| |
| int sb_min_blocksize(struct super_block *sb, int size) |
| { |
| int minsize = bdev_logical_block_size(sb->s_bdev); |
| if (size < minsize) |
| size = minsize; |
| return sb_set_blocksize(sb, size); |
| } |
| |
| EXPORT_SYMBOL(sb_min_blocksize); |
| |
| int sync_blockdev_nowait(struct block_device *bdev) |
| { |
| if (!bdev) |
| return 0; |
| return filemap_flush(bdev->bd_mapping); |
| } |
| EXPORT_SYMBOL_GPL(sync_blockdev_nowait); |
| |
| /* |
| * Write out and wait upon all the dirty data associated with a block |
| * device via its mapping. Does not take the superblock lock. |
| */ |
| int sync_blockdev(struct block_device *bdev) |
| { |
| if (!bdev) |
| return 0; |
| return filemap_write_and_wait(bdev->bd_mapping); |
| } |
| EXPORT_SYMBOL(sync_blockdev); |
| |
| int sync_blockdev_range(struct block_device *bdev, loff_t lstart, loff_t lend) |
| { |
| return filemap_write_and_wait_range(bdev->bd_mapping, |
| lstart, lend); |
| } |
| EXPORT_SYMBOL(sync_blockdev_range); |
| |
| /** |
| * bdev_freeze - lock a filesystem and force it into a consistent state |
| * @bdev: blockdevice to lock |
| * |
| * If a superblock is found on this device, we take the s_umount semaphore |
| * on it to make sure nobody unmounts until the snapshot creation is done. |
| * The reference counter (bd_fsfreeze_count) guarantees that only the last |
| * unfreeze process can unfreeze the frozen filesystem actually when multiple |
| * freeze requests arrive simultaneously. It counts up in bdev_freeze() and |
| * count down in bdev_thaw(). When it becomes 0, thaw_bdev() will unfreeze |
| * actually. |
| * |
| * Return: On success zero is returned, negative error code on failure. |
| */ |
| int bdev_freeze(struct block_device *bdev) |
| { |
| int error = 0; |
| |
| mutex_lock(&bdev->bd_fsfreeze_mutex); |
| |
| if (atomic_inc_return(&bdev->bd_fsfreeze_count) > 1) { |
| mutex_unlock(&bdev->bd_fsfreeze_mutex); |
| return 0; |
| } |
| |
| mutex_lock(&bdev->bd_holder_lock); |
| if (bdev->bd_holder_ops && bdev->bd_holder_ops->freeze) { |
| error = bdev->bd_holder_ops->freeze(bdev); |
| lockdep_assert_not_held(&bdev->bd_holder_lock); |
| } else { |
| mutex_unlock(&bdev->bd_holder_lock); |
| error = sync_blockdev(bdev); |
| } |
| |
| if (error) |
| atomic_dec(&bdev->bd_fsfreeze_count); |
| |
| mutex_unlock(&bdev->bd_fsfreeze_mutex); |
| return error; |
| } |
| EXPORT_SYMBOL(bdev_freeze); |
| |
| /** |
| * bdev_thaw - unlock filesystem |
| * @bdev: blockdevice to unlock |
| * |
| * Unlocks the filesystem and marks it writeable again after bdev_freeze(). |
| * |
| * Return: On success zero is returned, negative error code on failure. |
| */ |
| int bdev_thaw(struct block_device *bdev) |
| { |
| int error = -EINVAL, nr_freeze; |
| |
| mutex_lock(&bdev->bd_fsfreeze_mutex); |
| |
| /* |
| * If this returns < 0 it means that @bd_fsfreeze_count was |
| * already 0 and no decrement was performed. |
| */ |
| nr_freeze = atomic_dec_if_positive(&bdev->bd_fsfreeze_count); |
| if (nr_freeze < 0) |
| goto out; |
| |
| error = 0; |
| if (nr_freeze > 0) |
| goto out; |
| |
| mutex_lock(&bdev->bd_holder_lock); |
| if (bdev->bd_holder_ops && bdev->bd_holder_ops->thaw) { |
| error = bdev->bd_holder_ops->thaw(bdev); |
| lockdep_assert_not_held(&bdev->bd_holder_lock); |
| } else { |
| mutex_unlock(&bdev->bd_holder_lock); |
| } |
| |
| if (error) |
| atomic_inc(&bdev->bd_fsfreeze_count); |
| out: |
| mutex_unlock(&bdev->bd_fsfreeze_mutex); |
| return error; |
| } |
| EXPORT_SYMBOL(bdev_thaw); |
| |
| /* |
| * pseudo-fs |
| */ |
| |
| static __cacheline_aligned_in_smp DEFINE_MUTEX(bdev_lock); |
| static struct kmem_cache *bdev_cachep __ro_after_init; |
| |
| static struct inode *bdev_alloc_inode(struct super_block *sb) |
| { |
| struct bdev_inode *ei = alloc_inode_sb(sb, bdev_cachep, GFP_KERNEL); |
| |
| if (!ei) |
| return NULL; |
| memset(&ei->bdev, 0, sizeof(ei->bdev)); |
| |
| if (security_bdev_alloc(&ei->bdev)) { |
| kmem_cache_free(bdev_cachep, ei); |
| return NULL; |
| } |
| return &ei->vfs_inode; |
| } |
| |
| static void bdev_free_inode(struct inode *inode) |
| { |
| struct block_device *bdev = I_BDEV(inode); |
| |
| free_percpu(bdev->bd_stats); |
| kfree(bdev->bd_meta_info); |
| security_bdev_free(bdev); |
| |
| if (!bdev_is_partition(bdev)) { |
| if (bdev->bd_disk && bdev->bd_disk->bdi) |
| bdi_put(bdev->bd_disk->bdi); |
| kfree(bdev->bd_disk); |
| } |
| |
| if (MAJOR(bdev->bd_dev) == BLOCK_EXT_MAJOR) |
| blk_free_ext_minor(MINOR(bdev->bd_dev)); |
| |
| kmem_cache_free(bdev_cachep, BDEV_I(inode)); |
| } |
| |
| static void init_once(void *data) |
| { |
| struct bdev_inode *ei = data; |
| |
| inode_init_once(&ei->vfs_inode); |
| } |
| |
| static void bdev_evict_inode(struct inode *inode) |
| { |
| truncate_inode_pages_final(&inode->i_data); |
| invalidate_inode_buffers(inode); /* is it needed here? */ |
| clear_inode(inode); |
| } |
| |
| static const struct super_operations bdev_sops = { |
| .statfs = simple_statfs, |
| .alloc_inode = bdev_alloc_inode, |
| .free_inode = bdev_free_inode, |
| .drop_inode = generic_delete_inode, |
| .evict_inode = bdev_evict_inode, |
| }; |
| |
| static int bd_init_fs_context(struct fs_context *fc) |
| { |
| struct pseudo_fs_context *ctx = init_pseudo(fc, BDEVFS_MAGIC); |
| if (!ctx) |
| return -ENOMEM; |
| fc->s_iflags |= SB_I_CGROUPWB; |
| ctx->ops = &bdev_sops; |
| return 0; |
| } |
| |
| static struct file_system_type bd_type = { |
| .name = "bdev", |
| .init_fs_context = bd_init_fs_context, |
| .kill_sb = kill_anon_super, |
| }; |
| |
| struct super_block *blockdev_superblock __ro_after_init; |
| static struct vfsmount *blockdev_mnt __ro_after_init; |
| EXPORT_SYMBOL_GPL(blockdev_superblock); |
| |
| void __init bdev_cache_init(void) |
| { |
| int err; |
| |
| bdev_cachep = kmem_cache_create("bdev_cache", sizeof(struct bdev_inode), |
| 0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT| |
| SLAB_ACCOUNT|SLAB_PANIC), |
| init_once); |
| err = register_filesystem(&bd_type); |
| if (err) |
| panic("Cannot register bdev pseudo-fs"); |
| blockdev_mnt = kern_mount(&bd_type); |
| if (IS_ERR(blockdev_mnt)) |
| panic("Cannot create bdev pseudo-fs"); |
| blockdev_superblock = blockdev_mnt->mnt_sb; /* For writeback */ |
| } |
| |
| struct block_device *bdev_alloc(struct gendisk *disk, u8 partno) |
| { |
| struct block_device *bdev; |
| struct inode *inode; |
| |
| inode = new_inode(blockdev_superblock); |
| if (!inode) |
| return NULL; |
| inode->i_mode = S_IFBLK; |
| inode->i_rdev = 0; |
| inode->i_data.a_ops = &def_blk_aops; |
| mapping_set_gfp_mask(&inode->i_data, GFP_USER); |
| |
| bdev = I_BDEV(inode); |
| mutex_init(&bdev->bd_fsfreeze_mutex); |
| spin_lock_init(&bdev->bd_size_lock); |
| mutex_init(&bdev->bd_holder_lock); |
| atomic_set(&bdev->__bd_flags, partno); |
| bdev->bd_mapping = &inode->i_data; |
| bdev->bd_queue = disk->queue; |
| if (partno && bdev_test_flag(disk->part0, BD_HAS_SUBMIT_BIO)) |
| bdev_set_flag(bdev, BD_HAS_SUBMIT_BIO); |
| bdev->bd_stats = alloc_percpu(struct disk_stats); |
| if (!bdev->bd_stats) { |
| iput(inode); |
| return NULL; |
| } |
| bdev->bd_disk = disk; |
| return bdev; |
| } |
| |
| void bdev_set_nr_sectors(struct block_device *bdev, sector_t sectors) |
| { |
| spin_lock(&bdev->bd_size_lock); |
| i_size_write(BD_INODE(bdev), (loff_t)sectors << SECTOR_SHIFT); |
| bdev->bd_nr_sectors = sectors; |
| spin_unlock(&bdev->bd_size_lock); |
| } |
| |
| void bdev_add(struct block_device *bdev, dev_t dev) |
| { |
| struct inode *inode = BD_INODE(bdev); |
| if (bdev_stable_writes(bdev)) |
| mapping_set_stable_writes(bdev->bd_mapping); |
| bdev->bd_dev = dev; |
| inode->i_rdev = dev; |
| inode->i_ino = dev; |
| insert_inode_hash(inode); |
| } |
| |
| void bdev_unhash(struct block_device *bdev) |
| { |
| remove_inode_hash(BD_INODE(bdev)); |
| } |
| |
| void bdev_drop(struct block_device *bdev) |
| { |
| iput(BD_INODE(bdev)); |
| } |
| |
| long nr_blockdev_pages(void) |
| { |
| struct inode *inode; |
| long ret = 0; |
| |
| spin_lock(&blockdev_superblock->s_inode_list_lock); |
| list_for_each_entry(inode, &blockdev_superblock->s_inodes, i_sb_list) |
| ret += inode->i_mapping->nrpages; |
| spin_unlock(&blockdev_superblock->s_inode_list_lock); |
| |
| return ret; |
| } |
| |
| /** |
| * bd_may_claim - test whether a block device can be claimed |
| * @bdev: block device of interest |
| * @holder: holder trying to claim @bdev |
| * @hops: holder ops |
| * |
| * Test whether @bdev can be claimed by @holder. |
| * |
| * RETURNS: |
| * %true if @bdev can be claimed, %false otherwise. |
| */ |
| static bool bd_may_claim(struct block_device *bdev, void *holder, |
| const struct blk_holder_ops *hops) |
| { |
| struct block_device *whole = bdev_whole(bdev); |
| |
| lockdep_assert_held(&bdev_lock); |
| |
| if (bdev->bd_holder) { |
| /* |
| * The same holder can always re-claim. |
| */ |
| if (bdev->bd_holder == holder) { |
| if (WARN_ON_ONCE(bdev->bd_holder_ops != hops)) |
| return false; |
| return true; |
| } |
| return false; |
| } |
| |
| /* |
| * If the whole devices holder is set to bd_may_claim, a partition on |
| * the device is claimed, but not the whole device. |
| */ |
| if (whole != bdev && |
| whole->bd_holder && whole->bd_holder != bd_may_claim) |
| return false; |
| return true; |
| } |
| |
| /** |
| * bd_prepare_to_claim - claim a block device |
| * @bdev: block device of interest |
| * @holder: holder trying to claim @bdev |
| * @hops: holder ops. |
| * |
| * Claim @bdev. This function fails if @bdev is already claimed by another |
| * holder and waits if another claiming is in progress. return, the caller |
| * has ownership of bd_claiming and bd_holder[s]. |
| * |
| * RETURNS: |
| * 0 if @bdev can be claimed, -EBUSY otherwise. |
| */ |
| int bd_prepare_to_claim(struct block_device *bdev, void *holder, |
| const struct blk_holder_ops *hops) |
| { |
| struct block_device *whole = bdev_whole(bdev); |
| |
| if (WARN_ON_ONCE(!holder)) |
| return -EINVAL; |
| retry: |
| mutex_lock(&bdev_lock); |
| /* if someone else claimed, fail */ |
| if (!bd_may_claim(bdev, holder, hops)) { |
| mutex_unlock(&bdev_lock); |
| return -EBUSY; |
| } |
| |
| /* if claiming is already in progress, wait for it to finish */ |
| if (whole->bd_claiming) { |
| wait_queue_head_t *wq = __var_waitqueue(&whole->bd_claiming); |
| DEFINE_WAIT(wait); |
| |
| prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE); |
| mutex_unlock(&bdev_lock); |
| schedule(); |
| finish_wait(wq, &wait); |
| goto retry; |
| } |
| |
| /* yay, all mine */ |
| whole->bd_claiming = holder; |
| mutex_unlock(&bdev_lock); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bd_prepare_to_claim); /* only for the loop driver */ |
| |
| static void bd_clear_claiming(struct block_device *whole, void *holder) |
| { |
| lockdep_assert_held(&bdev_lock); |
| /* tell others that we're done */ |
| BUG_ON(whole->bd_claiming != holder); |
| whole->bd_claiming = NULL; |
| wake_up_var(&whole->bd_claiming); |
| } |
| |
| /** |
| * bd_finish_claiming - finish claiming of a block device |
| * @bdev: block device of interest |
| * @holder: holder that has claimed @bdev |
| * @hops: block device holder operations |
| * |
| * Finish exclusive open of a block device. Mark the device as exlusively |
| * open by the holder and wake up all waiters for exclusive open to finish. |
| */ |
| static void bd_finish_claiming(struct block_device *bdev, void *holder, |
| const struct blk_holder_ops *hops) |
| { |
| struct block_device *whole = bdev_whole(bdev); |
| |
| mutex_lock(&bdev_lock); |
| BUG_ON(!bd_may_claim(bdev, holder, hops)); |
| /* |
| * Note that for a whole device bd_holders will be incremented twice, |
| * and bd_holder will be set to bd_may_claim before being set to holder |
| */ |
| whole->bd_holders++; |
| whole->bd_holder = bd_may_claim; |
| bdev->bd_holders++; |
| mutex_lock(&bdev->bd_holder_lock); |
| bdev->bd_holder = holder; |
| bdev->bd_holder_ops = hops; |
| mutex_unlock(&bdev->bd_holder_lock); |
| bd_clear_claiming(whole, holder); |
| mutex_unlock(&bdev_lock); |
| } |
| |
| /** |
| * bd_abort_claiming - abort claiming of a block device |
| * @bdev: block device of interest |
| * @holder: holder that has claimed @bdev |
| * |
| * Abort claiming of a block device when the exclusive open failed. This can be |
| * also used when exclusive open is not actually desired and we just needed |
| * to block other exclusive openers for a while. |
| */ |
| void bd_abort_claiming(struct block_device *bdev, void *holder) |
| { |
| mutex_lock(&bdev_lock); |
| bd_clear_claiming(bdev_whole(bdev), holder); |
| mutex_unlock(&bdev_lock); |
| } |
| EXPORT_SYMBOL(bd_abort_claiming); |
| |
| static void bd_end_claim(struct block_device *bdev, void *holder) |
| { |
| struct block_device *whole = bdev_whole(bdev); |
| bool unblock = false; |
| |
| /* |
| * Release a claim on the device. The holder fields are protected with |
| * bdev_lock. open_mutex is used to synchronize disk_holder unlinking. |
| */ |
| mutex_lock(&bdev_lock); |
| WARN_ON_ONCE(bdev->bd_holder != holder); |
| WARN_ON_ONCE(--bdev->bd_holders < 0); |
| WARN_ON_ONCE(--whole->bd_holders < 0); |
| if (!bdev->bd_holders) { |
| mutex_lock(&bdev->bd_holder_lock); |
| bdev->bd_holder = NULL; |
| bdev->bd_holder_ops = NULL; |
| mutex_unlock(&bdev->bd_holder_lock); |
| if (bdev_test_flag(bdev, BD_WRITE_HOLDER)) |
| unblock = true; |
| } |
| if (!whole->bd_holders) |
| whole->bd_holder = NULL; |
| mutex_unlock(&bdev_lock); |
| |
| /* |
| * If this was the last claim, remove holder link and unblock evpoll if |
| * it was a write holder. |
| */ |
| if (unblock) { |
| disk_unblock_events(bdev->bd_disk); |
| bdev_clear_flag(bdev, BD_WRITE_HOLDER); |
| } |
| } |
| |
| static void blkdev_flush_mapping(struct block_device *bdev) |
| { |
| WARN_ON_ONCE(bdev->bd_holders); |
| sync_blockdev(bdev); |
| kill_bdev(bdev); |
| bdev_write_inode(bdev); |
| } |
| |
| static void blkdev_put_whole(struct block_device *bdev) |
| { |
| if (atomic_dec_and_test(&bdev->bd_openers)) |
| blkdev_flush_mapping(bdev); |
| if (bdev->bd_disk->fops->release) |
| bdev->bd_disk->fops->release(bdev->bd_disk); |
| } |
| |
| static int blkdev_get_whole(struct block_device *bdev, blk_mode_t mode) |
| { |
| struct gendisk *disk = bdev->bd_disk; |
| int ret; |
| |
| if (disk->fops->open) { |
| ret = disk->fops->open(disk, mode); |
| if (ret) { |
| /* avoid ghost partitions on a removed medium */ |
| if (ret == -ENOMEDIUM && |
| test_bit(GD_NEED_PART_SCAN, &disk->state)) |
| bdev_disk_changed(disk, true); |
| return ret; |
| } |
| } |
| |
| if (!atomic_read(&bdev->bd_openers)) |
| set_init_blocksize(bdev); |
| atomic_inc(&bdev->bd_openers); |
| if (test_bit(GD_NEED_PART_SCAN, &disk->state)) { |
| /* |
| * Only return scanning errors if we are called from contexts |
| * that explicitly want them, e.g. the BLKRRPART ioctl. |
| */ |
| ret = bdev_disk_changed(disk, false); |
| if (ret && (mode & BLK_OPEN_STRICT_SCAN)) { |
| blkdev_put_whole(bdev); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| static int blkdev_get_part(struct block_device *part, blk_mode_t mode) |
| { |
| struct gendisk *disk = part->bd_disk; |
| int ret; |
| |
| ret = blkdev_get_whole(bdev_whole(part), mode); |
| if (ret) |
| return ret; |
| |
| ret = -ENXIO; |
| if (!bdev_nr_sectors(part)) |
| goto out_blkdev_put; |
| |
| if (!atomic_read(&part->bd_openers)) { |
| disk->open_partitions++; |
| set_init_blocksize(part); |
| } |
| atomic_inc(&part->bd_openers); |
| return 0; |
| |
| out_blkdev_put: |
| blkdev_put_whole(bdev_whole(part)); |
| return ret; |
| } |
| |
| int bdev_permission(dev_t dev, blk_mode_t mode, void *holder) |
| { |
| int ret; |
| |
| ret = devcgroup_check_permission(DEVCG_DEV_BLOCK, |
| MAJOR(dev), MINOR(dev), |
| ((mode & BLK_OPEN_READ) ? DEVCG_ACC_READ : 0) | |
| ((mode & BLK_OPEN_WRITE) ? DEVCG_ACC_WRITE : 0)); |
| if (ret) |
| return ret; |
| |
| /* Blocking writes requires exclusive opener */ |
| if (mode & BLK_OPEN_RESTRICT_WRITES && !holder) |
| return -EINVAL; |
| |
| /* |
| * We're using error pointers to indicate to ->release() when we |
| * failed to open that block device. Also this doesn't make sense. |
| */ |
| if (WARN_ON_ONCE(IS_ERR(holder))) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void blkdev_put_part(struct block_device *part) |
| { |
| struct block_device *whole = bdev_whole(part); |
| |
| if (atomic_dec_and_test(&part->bd_openers)) { |
| blkdev_flush_mapping(part); |
| whole->bd_disk->open_partitions--; |
| } |
| blkdev_put_whole(whole); |
| } |
| |
| struct block_device *blkdev_get_no_open(dev_t dev) |
| { |
| struct block_device *bdev; |
| struct inode *inode; |
| |
| inode = ilookup(blockdev_superblock, dev); |
| if (!inode && IS_ENABLED(CONFIG_BLOCK_LEGACY_AUTOLOAD)) { |
| blk_request_module(dev); |
| inode = ilookup(blockdev_superblock, dev); |
| if (inode) |
| pr_warn_ratelimited( |
| "block device autoloading is deprecated and will be removed.\n"); |
| } |
| if (!inode) |
| return NULL; |
| |
| /* switch from the inode reference to a device mode one: */ |
| bdev = &BDEV_I(inode)->bdev; |
| if (!kobject_get_unless_zero(&bdev->bd_device.kobj)) |
| bdev = NULL; |
| iput(inode); |
| return bdev; |
| } |
| |
| void blkdev_put_no_open(struct block_device *bdev) |
| { |
| put_device(&bdev->bd_device); |
| } |
| |
| static bool bdev_writes_blocked(struct block_device *bdev) |
| { |
| return bdev->bd_writers < 0; |
| } |
| |
| static void bdev_block_writes(struct block_device *bdev) |
| { |
| bdev->bd_writers--; |
| } |
| |
| static void bdev_unblock_writes(struct block_device *bdev) |
| { |
| bdev->bd_writers++; |
| } |
| |
| static bool bdev_may_open(struct block_device *bdev, blk_mode_t mode) |
| { |
| if (bdev_allow_write_mounted) |
| return true; |
| /* Writes blocked? */ |
| if (mode & BLK_OPEN_WRITE && bdev_writes_blocked(bdev)) |
| return false; |
| if (mode & BLK_OPEN_RESTRICT_WRITES && bdev->bd_writers > 0) |
| return false; |
| return true; |
| } |
| |
| static void bdev_claim_write_access(struct block_device *bdev, blk_mode_t mode) |
| { |
| if (bdev_allow_write_mounted) |
| return; |
| |
| /* Claim exclusive or shared write access. */ |
| if (mode & BLK_OPEN_RESTRICT_WRITES) |
| bdev_block_writes(bdev); |
| else if (mode & BLK_OPEN_WRITE) |
| bdev->bd_writers++; |
| } |
| |
| static inline bool bdev_unclaimed(const struct file *bdev_file) |
| { |
| return bdev_file->private_data == BDEV_I(bdev_file->f_mapping->host); |
| } |
| |
| static void bdev_yield_write_access(struct file *bdev_file) |
| { |
| struct block_device *bdev; |
| |
| if (bdev_allow_write_mounted) |
| return; |
| |
| if (bdev_unclaimed(bdev_file)) |
| return; |
| |
| bdev = file_bdev(bdev_file); |
| |
| if (bdev_file->f_mode & FMODE_WRITE_RESTRICTED) |
| bdev_unblock_writes(bdev); |
| else if (bdev_file->f_mode & FMODE_WRITE) |
| bdev->bd_writers--; |
| } |
| |
| /** |
| * bdev_open - open a block device |
| * @bdev: block device to open |
| * @mode: open mode (BLK_OPEN_*) |
| * @holder: exclusive holder identifier |
| * @hops: holder operations |
| * @bdev_file: file for the block device |
| * |
| * Open the block device. If @holder is not %NULL, the block device is opened |
| * with exclusive access. Exclusive opens may nest for the same @holder. |
| * |
| * CONTEXT: |
| * Might sleep. |
| * |
| * RETURNS: |
| * zero on success, -errno on failure. |
| */ |
| int bdev_open(struct block_device *bdev, blk_mode_t mode, void *holder, |
| const struct blk_holder_ops *hops, struct file *bdev_file) |
| { |
| bool unblock_events = true; |
| struct gendisk *disk = bdev->bd_disk; |
| int ret; |
| |
| if (holder) { |
| mode |= BLK_OPEN_EXCL; |
| ret = bd_prepare_to_claim(bdev, holder, hops); |
| if (ret) |
| return ret; |
| } else { |
| if (WARN_ON_ONCE(mode & BLK_OPEN_EXCL)) |
| return -EIO; |
| } |
| |
| disk_block_events(disk); |
| |
| mutex_lock(&disk->open_mutex); |
| ret = -ENXIO; |
| if (!disk_live(disk)) |
| goto abort_claiming; |
| if (!try_module_get(disk->fops->owner)) |
| goto abort_claiming; |
| ret = -EBUSY; |
| if (!bdev_may_open(bdev, mode)) |
| goto put_module; |
| if (bdev_is_partition(bdev)) |
| ret = blkdev_get_part(bdev, mode); |
| else |
| ret = blkdev_get_whole(bdev, mode); |
| if (ret) |
| goto put_module; |
| bdev_claim_write_access(bdev, mode); |
| if (holder) { |
| bd_finish_claiming(bdev, holder, hops); |
| |
| /* |
| * Block event polling for write claims if requested. Any write |
| * holder makes the write_holder state stick until all are |
| * released. This is good enough and tracking individual |
| * writeable reference is too fragile given the way @mode is |
| * used in blkdev_get/put(). |
| */ |
| if ((mode & BLK_OPEN_WRITE) && |
| !bdev_test_flag(bdev, BD_WRITE_HOLDER) && |
| (disk->event_flags & DISK_EVENT_FLAG_BLOCK_ON_EXCL_WRITE)) { |
| bdev_set_flag(bdev, BD_WRITE_HOLDER); |
| unblock_events = false; |
| } |
| } |
| mutex_unlock(&disk->open_mutex); |
| |
| if (unblock_events) |
| disk_unblock_events(disk); |
| |
| bdev_file->f_flags |= O_LARGEFILE; |
| bdev_file->f_mode |= FMODE_CAN_ODIRECT; |
| if (bdev_nowait(bdev)) |
| bdev_file->f_mode |= FMODE_NOWAIT; |
| if (mode & BLK_OPEN_RESTRICT_WRITES) |
| bdev_file->f_mode |= FMODE_WRITE_RESTRICTED; |
| bdev_file->f_mapping = bdev->bd_mapping; |
| bdev_file->f_wb_err = filemap_sample_wb_err(bdev_file->f_mapping); |
| bdev_file->private_data = holder; |
| |
| return 0; |
| put_module: |
| module_put(disk->fops->owner); |
| abort_claiming: |
| if (holder) |
| bd_abort_claiming(bdev, holder); |
| mutex_unlock(&disk->open_mutex); |
| disk_unblock_events(disk); |
| return ret; |
| } |
| |
| /* |
| * If BLK_OPEN_WRITE_IOCTL is set then this is a historical quirk |
| * associated with the floppy driver where it has allowed ioctls if the |
| * file was opened for writing, but does not allow reads or writes. |
| * Make sure that this quirk is reflected in @f_flags. |
| * |
| * It can also happen if a block device is opened as O_RDWR | O_WRONLY. |
| */ |
| static unsigned blk_to_file_flags(blk_mode_t mode) |
| { |
| unsigned int flags = 0; |
| |
| if ((mode & (BLK_OPEN_READ | BLK_OPEN_WRITE)) == |
| (BLK_OPEN_READ | BLK_OPEN_WRITE)) |
| flags |= O_RDWR; |
| else if (mode & BLK_OPEN_WRITE_IOCTL) |
| flags |= O_RDWR | O_WRONLY; |
| else if (mode & BLK_OPEN_WRITE) |
| flags |= O_WRONLY; |
| else if (mode & BLK_OPEN_READ) |
| flags |= O_RDONLY; /* homeopathic, because O_RDONLY is 0 */ |
| else |
| WARN_ON_ONCE(true); |
| |
| if (mode & BLK_OPEN_NDELAY) |
| flags |= O_NDELAY; |
| |
| return flags; |
| } |
| |
| struct file *bdev_file_open_by_dev(dev_t dev, blk_mode_t mode, void *holder, |
| const struct blk_holder_ops *hops) |
| { |
| struct file *bdev_file; |
| struct block_device *bdev; |
| unsigned int flags; |
| int ret; |
| |
| ret = bdev_permission(dev, mode, holder); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| bdev = blkdev_get_no_open(dev); |
| if (!bdev) |
| return ERR_PTR(-ENXIO); |
| |
| flags = blk_to_file_flags(mode); |
| bdev_file = alloc_file_pseudo_noaccount(BD_INODE(bdev), |
| blockdev_mnt, "", flags | O_LARGEFILE, &def_blk_fops); |
| if (IS_ERR(bdev_file)) { |
| blkdev_put_no_open(bdev); |
| return bdev_file; |
| } |
| ihold(BD_INODE(bdev)); |
| |
| ret = bdev_open(bdev, mode, holder, hops, bdev_file); |
| if (ret) { |
| /* We failed to open the block device. Let ->release() know. */ |
| bdev_file->private_data = ERR_PTR(ret); |
| fput(bdev_file); |
| return ERR_PTR(ret); |
| } |
| return bdev_file; |
| } |
| EXPORT_SYMBOL(bdev_file_open_by_dev); |
| |
| struct file *bdev_file_open_by_path(const char *path, blk_mode_t mode, |
| void *holder, |
| const struct blk_holder_ops *hops) |
| { |
| struct file *file; |
| dev_t dev; |
| int error; |
| |
| error = lookup_bdev(path, &dev); |
| if (error) |
| return ERR_PTR(error); |
| |
| file = bdev_file_open_by_dev(dev, mode, holder, hops); |
| if (!IS_ERR(file) && (mode & BLK_OPEN_WRITE)) { |
| if (bdev_read_only(file_bdev(file))) { |
| fput(file); |
| file = ERR_PTR(-EACCES); |
| } |
| } |
| |
| return file; |
| } |
| EXPORT_SYMBOL(bdev_file_open_by_path); |
| |
| static inline void bd_yield_claim(struct file *bdev_file) |
| { |
| struct block_device *bdev = file_bdev(bdev_file); |
| void *holder = bdev_file->private_data; |
| |
| lockdep_assert_held(&bdev->bd_disk->open_mutex); |
| |
| if (WARN_ON_ONCE(IS_ERR_OR_NULL(holder))) |
| return; |
| |
| if (!bdev_unclaimed(bdev_file)) |
| bd_end_claim(bdev, holder); |
| } |
| |
| void bdev_release(struct file *bdev_file) |
| { |
| struct block_device *bdev = file_bdev(bdev_file); |
| void *holder = bdev_file->private_data; |
| struct gendisk *disk = bdev->bd_disk; |
| |
| /* We failed to open that block device. */ |
| if (IS_ERR(holder)) |
| goto put_no_open; |
| |
| /* |
| * Sync early if it looks like we're the last one. If someone else |
| * opens the block device between now and the decrement of bd_openers |
| * then we did a sync that we didn't need to, but that's not the end |
| * of the world and we want to avoid long (could be several minute) |
| * syncs while holding the mutex. |
| */ |
| if (atomic_read(&bdev->bd_openers) == 1) |
| sync_blockdev(bdev); |
| |
| mutex_lock(&disk->open_mutex); |
| bdev_yield_write_access(bdev_file); |
| |
| if (holder) |
| bd_yield_claim(bdev_file); |
| |
| /* |
| * Trigger event checking and tell drivers to flush MEDIA_CHANGE |
| * event. This is to ensure detection of media removal commanded |
| * from userland - e.g. eject(1). |
| */ |
| disk_flush_events(disk, DISK_EVENT_MEDIA_CHANGE); |
| |
| if (bdev_is_partition(bdev)) |
| blkdev_put_part(bdev); |
| else |
| blkdev_put_whole(bdev); |
| mutex_unlock(&disk->open_mutex); |
| |
| module_put(disk->fops->owner); |
| put_no_open: |
| blkdev_put_no_open(bdev); |
| } |
| |
| /** |
| * bdev_fput - yield claim to the block device and put the file |
| * @bdev_file: open block device |
| * |
| * Yield claim on the block device and put the file. Ensure that the |
| * block device can be reclaimed before the file is closed which is a |
| * deferred operation. |
| */ |
| void bdev_fput(struct file *bdev_file) |
| { |
| if (WARN_ON_ONCE(bdev_file->f_op != &def_blk_fops)) |
| return; |
| |
| if (bdev_file->private_data) { |
| struct block_device *bdev = file_bdev(bdev_file); |
| struct gendisk *disk = bdev->bd_disk; |
| |
| mutex_lock(&disk->open_mutex); |
| bdev_yield_write_access(bdev_file); |
| bd_yield_claim(bdev_file); |
| /* |
| * Tell release we already gave up our hold on the |
| * device and if write restrictions are available that |
| * we already gave up write access to the device. |
| */ |
| bdev_file->private_data = BDEV_I(bdev_file->f_mapping->host); |
| mutex_unlock(&disk->open_mutex); |
| } |
| |
| fput(bdev_file); |
| } |
| EXPORT_SYMBOL(bdev_fput); |
| |
| /** |
| * lookup_bdev() - Look up a struct block_device by name. |
| * @pathname: Name of the block device in the filesystem. |
| * @dev: Pointer to the block device's dev_t, if found. |
| * |
| * Lookup the block device's dev_t at @pathname in the current |
| * namespace if possible and return it in @dev. |
| * |
| * Context: May sleep. |
| * Return: 0 if succeeded, negative errno otherwise. |
| */ |
| int lookup_bdev(const char *pathname, dev_t *dev) |
| { |
| struct inode *inode; |
| struct path path; |
| int error; |
| |
| if (!pathname || !*pathname) |
| return -EINVAL; |
| |
| error = kern_path(pathname, LOOKUP_FOLLOW, &path); |
| if (error) |
| return error; |
| |
| inode = d_backing_inode(path.dentry); |
| error = -ENOTBLK; |
| if (!S_ISBLK(inode->i_mode)) |
| goto out_path_put; |
| error = -EACCES; |
| if (!may_open_dev(&path)) |
| goto out_path_put; |
| |
| *dev = inode->i_rdev; |
| error = 0; |
| out_path_put: |
| path_put(&path); |
| return error; |
| } |
| EXPORT_SYMBOL(lookup_bdev); |
| |
| /** |
| * bdev_mark_dead - mark a block device as dead |
| * @bdev: block device to operate on |
| * @surprise: indicate a surprise removal |
| * |
| * Tell the file system that this devices or media is dead. If @surprise is set |
| * to %true the device or media is already gone, if not we are preparing for an |
| * orderly removal. |
| * |
| * This calls into the file system, which then typicall syncs out all dirty data |
| * and writes back inodes and then invalidates any cached data in the inodes on |
| * the file system. In addition we also invalidate the block device mapping. |
| */ |
| void bdev_mark_dead(struct block_device *bdev, bool surprise) |
| { |
| mutex_lock(&bdev->bd_holder_lock); |
| if (bdev->bd_holder_ops && bdev->bd_holder_ops->mark_dead) |
| bdev->bd_holder_ops->mark_dead(bdev, surprise); |
| else { |
| mutex_unlock(&bdev->bd_holder_lock); |
| sync_blockdev(bdev); |
| } |
| |
| invalidate_bdev(bdev); |
| } |
| /* |
| * New drivers should not use this directly. There are some drivers however |
| * that needs this for historical reasons. For example, the DASD driver has |
| * historically had a shutdown to offline mode that doesn't actually remove the |
| * gendisk that otherwise looks a lot like a safe device removal. |
| */ |
| EXPORT_SYMBOL_GPL(bdev_mark_dead); |
| |
| void sync_bdevs(bool wait) |
| { |
| struct inode *inode, *old_inode = NULL; |
| |
| spin_lock(&blockdev_superblock->s_inode_list_lock); |
| list_for_each_entry(inode, &blockdev_superblock->s_inodes, i_sb_list) { |
| struct address_space *mapping = inode->i_mapping; |
| struct block_device *bdev; |
| |
| spin_lock(&inode->i_lock); |
| if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW) || |
| mapping->nrpages == 0) { |
| spin_unlock(&inode->i_lock); |
| continue; |
| } |
| __iget(inode); |
| spin_unlock(&inode->i_lock); |
| spin_unlock(&blockdev_superblock->s_inode_list_lock); |
| /* |
| * We hold a reference to 'inode' so it couldn't have been |
| * removed from s_inodes list while we dropped the |
| * s_inode_list_lock We cannot iput the inode now as we can |
| * be holding the last reference and we cannot iput it under |
| * s_inode_list_lock. So we keep the reference and iput it |
| * later. |
| */ |
| iput(old_inode); |
| old_inode = inode; |
| bdev = I_BDEV(inode); |
| |
| mutex_lock(&bdev->bd_disk->open_mutex); |
| if (!atomic_read(&bdev->bd_openers)) { |
| ; /* skip */ |
| } else if (wait) { |
| /* |
| * We keep the error status of individual mapping so |
| * that applications can catch the writeback error using |
| * fsync(2). See filemap_fdatawait_keep_errors() for |
| * details. |
| */ |
| filemap_fdatawait_keep_errors(inode->i_mapping); |
| } else { |
| filemap_fdatawrite(inode->i_mapping); |
| } |
| mutex_unlock(&bdev->bd_disk->open_mutex); |
| |
| spin_lock(&blockdev_superblock->s_inode_list_lock); |
| } |
| spin_unlock(&blockdev_superblock->s_inode_list_lock); |
| iput(old_inode); |
| } |
| |
| /* |
| * Handle STATX_{DIOALIGN, WRITE_ATOMIC} for block devices. |
| */ |
| void bdev_statx(struct path *path, struct kstat *stat, |
| u32 request_mask) |
| { |
| struct inode *backing_inode; |
| struct block_device *bdev; |
| |
| if (!(request_mask & (STATX_DIOALIGN | STATX_WRITE_ATOMIC))) |
| return; |
| |
| backing_inode = d_backing_inode(path->dentry); |
| |
| /* |
| * Note that backing_inode is the inode of a block device node file, |
| * not the block device's internal inode. Therefore it is *not* valid |
| * to use I_BDEV() here; the block device has to be looked up by i_rdev |
| * instead. |
| */ |
| bdev = blkdev_get_no_open(backing_inode->i_rdev); |
| if (!bdev) |
| return; |
| |
| if (request_mask & STATX_DIOALIGN) { |
| stat->dio_mem_align = bdev_dma_alignment(bdev) + 1; |
| stat->dio_offset_align = bdev_logical_block_size(bdev); |
| stat->result_mask |= STATX_DIOALIGN; |
| } |
| |
| if (request_mask & STATX_WRITE_ATOMIC && bdev_can_atomic_write(bdev)) { |
| struct request_queue *bd_queue = bdev->bd_queue; |
| |
| generic_fill_statx_atomic_writes(stat, |
| queue_atomic_write_unit_min_bytes(bd_queue), |
| queue_atomic_write_unit_max_bytes(bd_queue)); |
| } |
| |
| blkdev_put_no_open(bdev); |
| } |
| |
| bool disk_live(struct gendisk *disk) |
| { |
| return !inode_unhashed(BD_INODE(disk->part0)); |
| } |
| EXPORT_SYMBOL_GPL(disk_live); |
| |
| unsigned int block_size(struct block_device *bdev) |
| { |
| return 1 << BD_INODE(bdev)->i_blkbits; |
| } |
| EXPORT_SYMBOL_GPL(block_size); |
| |
| static int __init setup_bdev_allow_write_mounted(char *str) |
| { |
| if (kstrtobool(str, &bdev_allow_write_mounted)) |
| pr_warn("Invalid option string for bdev_allow_write_mounted:" |
| " '%s'\n", str); |
| return 1; |
| } |
| __setup("bdev_allow_write_mounted=", setup_bdev_allow_write_mounted); |