| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Proximity sensors |
| # |
| |
| menu "Lightning sensors" |
| |
| config AS3935 |
| tristate "AS3935 Franklin lightning sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| depends on SPI |
| help |
| Say Y here to build SPI interface support for the Austrian |
| Microsystems AS3935 lightning detection sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called as3935 |
| |
| endmenu |
| |
| menu "Proximity and distance sensors" |
| |
| config CROS_EC_MKBP_PROXIMITY |
| tristate "ChromeOS EC MKBP Proximity sensor" |
| depends on CROS_EC |
| help |
| Say Y here to enable the proximity sensor implemented via the ChromeOS EC MKBP |
| switches protocol. You must enable one bus option (CROS_EC_I2C or CROS_EC_SPI) |
| to use this. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cros_ec_mkbp_proximity. |
| |
| config HX9023S |
| tristate "TYHX HX9023S SAR sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| depends on I2C |
| help |
| Say Y here to build a driver for TYHX HX9023S capacitive SAR sensor. |
| This driver supports the TYHX HX9023S capacitive |
| SAR sensors. This sensors is used for proximity detection applications. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hx9023s. |
| |
| config IRSD200 |
| tristate "Murata IRS-D200 PIR sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| depends on I2C |
| help |
| Say Y here to build a driver for the Murata IRS-D200 PIR sensor. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called irsd200. |
| |
| config ISL29501 |
| tristate "Intersil ISL29501 Time Of Flight sensor" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select IIO_KFIFO_BUF |
| help |
| Say Y here if you want to build a driver for the Intersil ISL29501 |
| Time of Flight sensor. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called isl29501. |
| |
| config LIDAR_LITE_V2 |
| tristate "PulsedLight LIDAR sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| depends on I2C |
| help |
| Say Y to build a driver for PulsedLight LIDAR range finding |
| sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pulsedlight-lite-v2 |
| |
| config MB1232 |
| tristate "MaxSonar I2CXL family ultrasonic sensors" |
| depends on I2C |
| help |
| Say Y to build a driver for the ultrasonic sensors I2CXL of |
| MaxBotix which have an i2c interface. It can be used to measure |
| the distance of objects. Supported types are mb1202, mb1212, |
| mb1222, mb1232, mb1242, mb7040, mb7137 |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mb1232. |
| |
| config PING |
| tristate "Parallax GPIO bitbanged ranger sensors" |
| depends on GPIOLIB |
| help |
| Say Y here to build a driver for GPIO bitbanged ranger sensors |
| with just one GPIO for the trigger and echo. This driver can be |
| used to measure the distance of objects. |
| |
| Actually supported are: |
| - Parallax PING))) (ultrasonic) |
| - Parallax LaserPING (time-of-flight) |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ping. |
| |
| config RFD77402 |
| tristate "RFD77402 ToF sensor" |
| depends on I2C |
| help |
| Say Y to build a driver for the RFD77402 Time-of-Flight (distance) |
| sensor module with I2C interface. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rfd77402. |
| |
| config SRF04 |
| tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)" |
| depends on GPIOLIB |
| help |
| Say Y here to build a driver for GPIO bitbanged ultrasonic |
| ranger sensor. This driver can be used to measure the distance |
| of objects. It is using two GPIOs. |
| Actually Supported types are: |
| - Devantech SRF04 |
| - Maxbotix mb1000 |
| - Maxbotix mb1010 |
| - Maxbotix mb1020 |
| - Maxbotix mb1030 |
| - Maxbotix mb1040 |
| |
| To compile this driver as a module, choose M here: the |
| module will be called srf04. |
| |
| config SX_COMMON |
| tristate |
| help |
| Common Semtech proximity sensor code. |
| |
| config SX9310 |
| tristate "SX9310/SX9311 Semtech proximity sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| select SX_COMMON |
| depends on I2C |
| help |
| Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive |
| proximity/button sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sx9310. |
| |
| config SX9324 |
| tristate "SX9324 Semtech proximity sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| select SX_COMMON |
| depends on I2C |
| help |
| Say Y here to build a driver for Semtech's SX9324 |
| proximity/button sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sx9324. |
| |
| config SX9360 |
| tristate "SX9360 Semtech proximity sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| select SX_COMMON |
| depends on I2C |
| help |
| Say Y here to build a driver for Semtech's SX9360 |
| proximity/button sensor, a simplified SX9324. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sx9360. |
| |
| config SX9500 |
| tristate "SX9500 Semtech proximity sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| depends on I2C |
| help |
| Say Y here to build a driver for Semtech's SX9500 capacitive |
| proximity/button sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sx9500. |
| |
| config SRF08 |
| tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| depends on I2C |
| help |
| Say Y here to build a driver for Devantech SRF02/SRF08/SRF10 |
| ultrasonic ranger sensors with i2c interface. |
| This driver can be used to measure the distance of objects. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called srf08. |
| |
| config VCNL3020 |
| tristate "VCNL3020 proximity sensor" |
| select REGMAP_I2C |
| depends on I2C |
| help |
| Say Y here if you want to build a driver for the Vishay VCNL3020 |
| proximity sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vcnl3020. |
| |
| config VL53L0X_I2C |
| tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)" |
| depends on I2C |
| help |
| Say Y here to build a driver for STMicroelectronics VL53L0X |
| ToF ranger sensors with i2c interface. |
| This driver can be used to measure the distance of objects. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vl53l0x-i2c. |
| |
| config AW96103 |
| tristate "AW96103/AW96105 Awinic proximity sensor" |
| select REGMAP_I2C |
| depends on I2C |
| help |
| Say Y here to build a driver for Awinic's AW96103/AW96105 capacitive |
| proximity sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called aw96103. |
| |
| endmenu |