| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 Oracle. All rights reserved. |
| */ |
| |
| #include <linux/types.h> |
| #include "btrfs-tests.h" |
| #include "../ctree.h" |
| #include "../btrfs_inode.h" |
| #include "../volumes.h" |
| #include "../disk-io.h" |
| #include "../block-group.h" |
| |
| static int free_extent_map_tree(struct btrfs_inode *inode) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| struct rb_node *node; |
| int ret = 0; |
| |
| write_lock(&em_tree->lock); |
| while (!RB_EMPTY_ROOT(&em_tree->root)) { |
| node = rb_first(&em_tree->root); |
| em = rb_entry(node, struct extent_map, rb_node); |
| remove_extent_mapping(inode, em); |
| |
| #ifdef CONFIG_BTRFS_DEBUG |
| if (refcount_read(&em->refs) != 1) { |
| ret = -EINVAL; |
| test_err( |
| "em leak: em (start %llu len %llu disk_bytenr %llu disk_num_bytes %llu offset %llu) refs %d", |
| em->start, em->len, em->disk_bytenr, |
| em->disk_num_bytes, em->offset, |
| refcount_read(&em->refs)); |
| |
| refcount_set(&em->refs, 1); |
| } |
| #endif |
| free_extent_map(em); |
| } |
| write_unlock(&em_tree->lock); |
| |
| return ret; |
| } |
| |
| /* |
| * Test scenario: |
| * |
| * Suppose that no extent map has been loaded into memory yet, there is a file |
| * extent [0, 16K), followed by another file extent [16K, 20K), two dio reads |
| * are entering btrfs_get_extent() concurrently, t1 is reading [8K, 16K), t2 is |
| * reading [0, 8K) |
| * |
| * t1 t2 |
| * btrfs_get_extent() btrfs_get_extent() |
| * -> lookup_extent_mapping() ->lookup_extent_mapping() |
| * -> add_extent_mapping(0, 16K) |
| * -> return em |
| * ->add_extent_mapping(0, 16K) |
| * -> #handle -EEXIST |
| */ |
| static int test_case_1(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| u64 start = 0; |
| u64 len = SZ_8K; |
| int ret; |
| int ret2; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| /* Add [0, 16K) */ |
| em->start = 0; |
| em->len = SZ_16K; |
| em->disk_bytenr = 0; |
| em->disk_num_bytes = SZ_16K; |
| em->ram_bytes = SZ_16K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [0, 16K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| /* Add [16K, 20K) following [0, 16K) */ |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| em->start = SZ_16K; |
| em->len = SZ_4K; |
| em->disk_bytenr = SZ_32K; /* avoid merging */ |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = SZ_4K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [16K, 20K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Add [0, 8K), should return [0, 16K) instead. */ |
| em->start = start; |
| em->len = len; |
| em->disk_bytenr = start; |
| em->disk_num_bytes = len; |
| em->ram_bytes = len; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret) { |
| test_err("case1 [%llu %llu]: ret %d", start, start + len, ret); |
| goto out; |
| } |
| if (!em) { |
| test_err("case1 [%llu %llu]: no extent map returned", |
| start, start + len); |
| ret = -ENOENT; |
| goto out; |
| } |
| if (em->start != 0 || extent_map_end(em) != SZ_16K || |
| em->disk_bytenr != 0 || em->disk_num_bytes != SZ_16K) { |
| test_err( |
| "case1 [%llu %llu]: ret %d return a wrong em (start %llu len %llu disk_bytenr %llu disk_num_bytes %llu", |
| start, start + len, ret, em->start, em->len, |
| em->disk_bytenr, em->disk_num_bytes); |
| ret = -EINVAL; |
| } |
| free_extent_map(em); |
| out: |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| /* |
| * Test scenario: |
| * |
| * Reading the inline ending up with EEXIST, ie. read an inline |
| * extent and discard page cache and read it again. |
| */ |
| static int test_case_2(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| int ret; |
| int ret2; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| /* Add [0, 1K) */ |
| em->start = 0; |
| em->len = SZ_1K; |
| em->disk_bytenr = EXTENT_MAP_INLINE; |
| em->disk_num_bytes = 0; |
| em->ram_bytes = SZ_1K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [0, 1K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| /* Add [4K, 8K) following [0, 1K) */ |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| em->start = SZ_4K; |
| em->len = SZ_4K; |
| em->disk_bytenr = SZ_4K; |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = SZ_4K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [4K, 8K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Add [0, 1K) */ |
| em->start = 0; |
| em->len = SZ_1K; |
| em->disk_bytenr = EXTENT_MAP_INLINE; |
| em->disk_num_bytes = 0; |
| em->ram_bytes = SZ_1K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret) { |
| test_err("case2 [0 1K]: ret %d", ret); |
| goto out; |
| } |
| if (!em) { |
| test_err("case2 [0 1K]: no extent map returned"); |
| ret = -ENOENT; |
| goto out; |
| } |
| if (em->start != 0 || extent_map_end(em) != SZ_1K || |
| em->disk_bytenr != EXTENT_MAP_INLINE) { |
| test_err( |
| "case2 [0 1K]: ret %d return a wrong em (start %llu len %llu disk_bytenr %llu", |
| ret, em->start, em->len, em->disk_bytenr); |
| ret = -EINVAL; |
| } |
| free_extent_map(em); |
| out: |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| static int __test_case_3(struct btrfs_fs_info *fs_info, |
| struct btrfs_inode *inode, u64 start) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| u64 len = SZ_4K; |
| int ret; |
| int ret2; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| /* Add [4K, 8K) */ |
| em->start = SZ_4K; |
| em->len = SZ_4K; |
| em->disk_bytenr = SZ_4K; |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = SZ_4K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [4K, 8K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Add [0, 16K) */ |
| em->start = 0; |
| em->len = SZ_16K; |
| em->disk_bytenr = 0; |
| em->disk_num_bytes = SZ_16K; |
| em->ram_bytes = SZ_16K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, start, len); |
| write_unlock(&em_tree->lock); |
| if (ret) { |
| test_err("case3 [%llu %llu): ret %d", |
| start, start + len, ret); |
| goto out; |
| } |
| if (!em) { |
| test_err("case3 [%llu %llu): no extent map returned", |
| start, start + len); |
| ret = -ENOENT; |
| goto out; |
| } |
| /* |
| * Since bytes within em are contiguous, em->block_start is identical to |
| * em->start. |
| */ |
| if (start < em->start || start + len > extent_map_end(em) || |
| em->start != extent_map_block_start(em)) { |
| test_err( |
| "case3 [%llu %llu): ret %d em (start %llu len %llu disk_bytenr %llu block_len %llu)", |
| start, start + len, ret, em->start, em->len, |
| em->disk_bytenr, em->disk_num_bytes); |
| ret = -EINVAL; |
| } |
| free_extent_map(em); |
| out: |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| /* |
| * Test scenario: |
| * |
| * Suppose that no extent map has been loaded into memory yet. |
| * There is a file extent [0, 16K), two jobs are running concurrently |
| * against it, t1 is buffered writing to [4K, 8K) and t2 is doing dio |
| * read from [0, 4K) or [8K, 12K) or [12K, 16K). |
| * |
| * t1 goes ahead of t2 and adds em [4K, 8K) into tree. |
| * |
| * t1 t2 |
| * cow_file_range() btrfs_get_extent() |
| * -> lookup_extent_mapping() |
| * -> add_extent_mapping() |
| * -> add_extent_mapping() |
| */ |
| static int test_case_3(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| int ret; |
| |
| ret = __test_case_3(fs_info, inode, 0); |
| if (ret) |
| return ret; |
| ret = __test_case_3(fs_info, inode, SZ_8K); |
| if (ret) |
| return ret; |
| ret = __test_case_3(fs_info, inode, (12 * SZ_1K)); |
| |
| return ret; |
| } |
| |
| static int __test_case_4(struct btrfs_fs_info *fs_info, |
| struct btrfs_inode *inode, u64 start) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| u64 len = SZ_4K; |
| int ret; |
| int ret2; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| /* Add [0K, 8K) */ |
| em->start = 0; |
| em->len = SZ_8K; |
| em->disk_bytenr = 0; |
| em->disk_num_bytes = SZ_8K; |
| em->ram_bytes = SZ_8K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [0, 8K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Add [8K, 32K) */ |
| em->start = SZ_8K; |
| em->len = 24 * SZ_1K; |
| em->disk_bytenr = SZ_16K; /* avoid merging */ |
| em->disk_num_bytes = 24 * SZ_1K; |
| em->ram_bytes = 24 * SZ_1K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("cannot add extent range [8K, 32K)"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| /* Add [0K, 32K) */ |
| em->start = 0; |
| em->len = SZ_32K; |
| em->disk_bytenr = 0; |
| em->disk_num_bytes = SZ_32K; |
| em->ram_bytes = SZ_32K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, start, len); |
| write_unlock(&em_tree->lock); |
| if (ret) { |
| test_err("case4 [%llu %llu): ret %d", |
| start, start + len, ret); |
| goto out; |
| } |
| if (!em) { |
| test_err("case4 [%llu %llu): no extent map returned", |
| start, start + len); |
| ret = -ENOENT; |
| goto out; |
| } |
| if (start < em->start || start + len > extent_map_end(em)) { |
| test_err( |
| "case4 [%llu %llu): ret %d, added wrong em (start %llu len %llu disk_bytenr %llu disk_num_bytes %llu)", |
| start, start + len, ret, em->start, em->len, |
| em->disk_bytenr, em->disk_num_bytes); |
| ret = -EINVAL; |
| } |
| free_extent_map(em); |
| out: |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| /* |
| * Test scenario: |
| * |
| * Suppose that no extent map has been loaded into memory yet. |
| * There is a file extent [0, 32K), two jobs are running concurrently |
| * against it, t1 is doing dio write to [8K, 32K) and t2 is doing dio |
| * read from [0, 4K) or [4K, 8K). |
| * |
| * t1 goes ahead of t2 and splits em [0, 32K) to em [0K, 8K) and [8K 32K). |
| * |
| * t1 t2 |
| * btrfs_get_blocks_direct() btrfs_get_blocks_direct() |
| * -> btrfs_get_extent() -> btrfs_get_extent() |
| * -> lookup_extent_mapping() |
| * -> add_extent_mapping() -> lookup_extent_mapping() |
| * # load [0, 32K) |
| * -> btrfs_new_extent_direct() |
| * -> btrfs_drop_extent_cache() |
| * # split [0, 32K) |
| * -> add_extent_mapping() |
| * # add [8K, 32K) |
| * -> add_extent_mapping() |
| * # handle -EEXIST when adding |
| * # [0, 32K) |
| */ |
| static int test_case_4(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| int ret; |
| |
| ret = __test_case_4(fs_info, inode, 0); |
| if (ret) |
| return ret; |
| ret = __test_case_4(fs_info, inode, SZ_4K); |
| |
| return ret; |
| } |
| |
| static int add_compressed_extent(struct btrfs_inode *inode, |
| u64 start, u64 len, u64 block_start) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| int ret; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| em->start = start; |
| em->len = len; |
| em->disk_bytenr = block_start; |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = len; |
| em->flags |= EXTENT_FLAG_COMPRESS_ZLIB; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| free_extent_map(em); |
| if (ret < 0) { |
| test_err("cannot add extent map [%llu, %llu)", start, start + len); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| struct extent_range { |
| u64 start; |
| u64 len; |
| }; |
| |
| /* The valid states of the tree after every drop, as described below. */ |
| struct extent_range valid_ranges[][7] = { |
| { |
| { .start = 0, .len = SZ_8K }, /* [0, 8K) */ |
| { .start = SZ_4K * 3, .len = SZ_4K * 3}, /* [12k, 24k) */ |
| { .start = SZ_4K * 6, .len = SZ_4K * 3}, /* [24k, 36k) */ |
| { .start = SZ_32K + SZ_4K, .len = SZ_4K}, /* [36k, 40k) */ |
| { .start = SZ_4K * 10, .len = SZ_4K * 6}, /* [40k, 64k) */ |
| }, |
| { |
| { .start = 0, .len = SZ_8K }, /* [0, 8K) */ |
| { .start = SZ_4K * 5, .len = SZ_4K}, /* [20k, 24k) */ |
| { .start = SZ_4K * 6, .len = SZ_4K * 3}, /* [24k, 36k) */ |
| { .start = SZ_32K + SZ_4K, .len = SZ_4K}, /* [36k, 40k) */ |
| { .start = SZ_4K * 10, .len = SZ_4K * 6}, /* [40k, 64k) */ |
| }, |
| { |
| { .start = 0, .len = SZ_8K }, /* [0, 8K) */ |
| { .start = SZ_4K * 5, .len = SZ_4K}, /* [20k, 24k) */ |
| { .start = SZ_4K * 6, .len = SZ_4K}, /* [24k, 28k) */ |
| { .start = SZ_32K, .len = SZ_4K}, /* [32k, 36k) */ |
| { .start = SZ_32K + SZ_4K, .len = SZ_4K}, /* [36k, 40k) */ |
| { .start = SZ_4K * 10, .len = SZ_4K * 6}, /* [40k, 64k) */ |
| }, |
| { |
| { .start = 0, .len = SZ_8K}, /* [0, 8K) */ |
| { .start = SZ_4K * 5, .len = SZ_4K}, /* [20k, 24k) */ |
| { .start = SZ_4K * 6, .len = SZ_4K}, /* [24k, 28k) */ |
| } |
| }; |
| |
| static int validate_range(struct extent_map_tree *em_tree, int index) |
| { |
| struct rb_node *n; |
| int i; |
| |
| for (i = 0, n = rb_first(&em_tree->root); |
| valid_ranges[index][i].len && n; |
| i++, n = rb_next(n)) { |
| struct extent_map *entry = rb_entry(n, struct extent_map, rb_node); |
| |
| if (entry->start != valid_ranges[index][i].start) { |
| test_err("mapping has start %llu expected %llu", |
| entry->start, valid_ranges[index][i].start); |
| return -EINVAL; |
| } |
| |
| if (entry->len != valid_ranges[index][i].len) { |
| test_err("mapping has len %llu expected %llu", |
| entry->len, valid_ranges[index][i].len); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * We exited because we don't have any more entries in the extent_map |
| * but we still expect more valid entries. |
| */ |
| if (valid_ranges[index][i].len) { |
| test_err("missing an entry"); |
| return -EINVAL; |
| } |
| |
| /* We exited the loop but still have entries in the extent map. */ |
| if (n) { |
| test_err("we have a left over entry in the extent map we didn't expect"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Test scenario: |
| * |
| * Test the various edge cases of btrfs_drop_extent_map_range, create the |
| * following ranges |
| * |
| * [0, 12k)[12k, 24k)[24k, 36k)[36k, 40k)[40k,64k) |
| * |
| * And then we'll drop: |
| * |
| * [8k, 12k) - test the single front split |
| * [12k, 20k) - test the single back split |
| * [28k, 32k) - test the double split |
| * [32k, 64k) - test whole em dropping |
| * |
| * They'll have the EXTENT_FLAG_COMPRESSED flag set to keep the em tree from |
| * merging the em's. |
| */ |
| static int test_case_5(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| u64 start, end; |
| int ret; |
| int ret2; |
| |
| test_msg("Running btrfs_drop_extent_map_range tests"); |
| |
| /* [0, 12k) */ |
| ret = add_compressed_extent(inode, 0, SZ_4K * 3, 0); |
| if (ret) { |
| test_err("cannot add extent range [0, 12K)"); |
| goto out; |
| } |
| |
| /* [12k, 24k) */ |
| ret = add_compressed_extent(inode, SZ_4K * 3, SZ_4K * 3, SZ_4K); |
| if (ret) { |
| test_err("cannot add extent range [12k, 24k)"); |
| goto out; |
| } |
| |
| /* [24k, 36k) */ |
| ret = add_compressed_extent(inode, SZ_4K * 6, SZ_4K * 3, SZ_8K); |
| if (ret) { |
| test_err("cannot add extent range [12k, 24k)"); |
| goto out; |
| } |
| |
| /* [36k, 40k) */ |
| ret = add_compressed_extent(inode, SZ_32K + SZ_4K, SZ_4K, SZ_4K * 3); |
| if (ret) { |
| test_err("cannot add extent range [12k, 24k)"); |
| goto out; |
| } |
| |
| /* [40k, 64k) */ |
| ret = add_compressed_extent(inode, SZ_4K * 10, SZ_4K * 6, SZ_16K); |
| if (ret) { |
| test_err("cannot add extent range [12k, 24k)"); |
| goto out; |
| } |
| |
| /* Drop [8k, 12k) */ |
| start = SZ_8K; |
| end = (3 * SZ_4K) - 1; |
| btrfs_drop_extent_map_range(inode, start, end, false); |
| ret = validate_range(&inode->extent_tree, 0); |
| if (ret) |
| goto out; |
| |
| /* Drop [12k, 20k) */ |
| start = SZ_4K * 3; |
| end = SZ_16K + SZ_4K - 1; |
| btrfs_drop_extent_map_range(inode, start, end, false); |
| ret = validate_range(&inode->extent_tree, 1); |
| if (ret) |
| goto out; |
| |
| /* Drop [28k, 32k) */ |
| start = SZ_32K - SZ_4K; |
| end = SZ_32K - 1; |
| btrfs_drop_extent_map_range(inode, start, end, false); |
| ret = validate_range(&inode->extent_tree, 2); |
| if (ret) |
| goto out; |
| |
| /* Drop [32k, 64k) */ |
| start = SZ_32K; |
| end = SZ_64K - 1; |
| btrfs_drop_extent_map_range(inode, start, end, false); |
| ret = validate_range(&inode->extent_tree, 3); |
| if (ret) |
| goto out; |
| out: |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| /* |
| * Test the btrfs_add_extent_mapping helper which will attempt to create an em |
| * for areas between two existing ems. Validate it doesn't do this when there |
| * are two unmerged em's side by side. |
| */ |
| static int test_case_6(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em = NULL; |
| int ret; |
| int ret2; |
| |
| ret = add_compressed_extent(inode, 0, SZ_4K, 0); |
| if (ret) |
| goto out; |
| |
| ret = add_compressed_extent(inode, SZ_4K, SZ_4K, 0); |
| if (ret) |
| goto out; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| em->start = SZ_4K; |
| em->len = SZ_4K; |
| em->disk_bytenr = SZ_16K; |
| em->disk_num_bytes = SZ_16K; |
| em->ram_bytes = SZ_16K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, 0, SZ_8K); |
| write_unlock(&em_tree->lock); |
| |
| if (ret != 0) { |
| test_err("got an error when adding our em: %d", ret); |
| goto out; |
| } |
| |
| ret = -EINVAL; |
| if (em->start != 0) { |
| test_err("unexpected em->start at %llu, wanted 0", em->start); |
| goto out; |
| } |
| if (em->len != SZ_4K) { |
| test_err("unexpected em->len %llu, expected 4K", em->len); |
| goto out; |
| } |
| ret = 0; |
| out: |
| free_extent_map(em); |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| /* |
| * Regression test for btrfs_drop_extent_map_range. Calling with skip_pinned == |
| * true would mess up the start/end calculations and subsequent splits would be |
| * incorrect. |
| */ |
| static int test_case_7(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| int ret; |
| int ret2; |
| |
| test_msg("Running btrfs_drop_extent_cache with pinned"); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| /* [0, 16K), pinned */ |
| em->start = 0; |
| em->len = SZ_16K; |
| em->disk_bytenr = 0; |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = SZ_16K; |
| em->flags |= (EXTENT_FLAG_PINNED | EXTENT_FLAG_COMPRESS_ZLIB); |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("couldn't add extent map"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* [32K, 48K), not pinned */ |
| em->start = SZ_32K; |
| em->len = SZ_16K; |
| em->disk_bytenr = SZ_32K; |
| em->disk_num_bytes = SZ_16K; |
| em->ram_bytes = SZ_16K; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| if (ret < 0) { |
| test_err("couldn't add extent map"); |
| goto out; |
| } |
| free_extent_map(em); |
| |
| /* |
| * Drop [0, 36K) This should skip the [0, 4K) extent and then split the |
| * [32K, 48K) extent. |
| */ |
| btrfs_drop_extent_map_range(inode, 0, (36 * SZ_1K) - 1, true); |
| |
| /* Make sure our extent maps look sane. */ |
| ret = -EINVAL; |
| |
| em = lookup_extent_mapping(em_tree, 0, SZ_16K); |
| if (!em) { |
| test_err("didn't find an em at 0 as expected"); |
| goto out; |
| } |
| |
| if (em->start != 0) { |
| test_err("em->start is %llu, expected 0", em->start); |
| goto out; |
| } |
| |
| if (em->len != SZ_16K) { |
| test_err("em->len is %llu, expected 16K", em->len); |
| goto out; |
| } |
| |
| free_extent_map(em); |
| |
| read_lock(&em_tree->lock); |
| em = lookup_extent_mapping(em_tree, SZ_16K, SZ_16K); |
| read_unlock(&em_tree->lock); |
| if (em) { |
| test_err("found an em when we weren't expecting one"); |
| goto out; |
| } |
| |
| read_lock(&em_tree->lock); |
| em = lookup_extent_mapping(em_tree, SZ_32K, SZ_16K); |
| read_unlock(&em_tree->lock); |
| if (!em) { |
| test_err("didn't find an em at 32K as expected"); |
| goto out; |
| } |
| |
| if (em->start != (36 * SZ_1K)) { |
| test_err("em->start is %llu, expected 36K", em->start); |
| goto out; |
| } |
| |
| if (em->len != (12 * SZ_1K)) { |
| test_err("em->len is %llu, expected 12K", em->len); |
| goto out; |
| } |
| |
| if (extent_map_block_start(em) != SZ_32K + SZ_4K) { |
| test_err("em->block_start is %llu, expected 36K", |
| extent_map_block_start(em)); |
| goto out; |
| } |
| |
| free_extent_map(em); |
| |
| read_lock(&em_tree->lock); |
| em = lookup_extent_mapping(em_tree, 48 * SZ_1K, (u64)-1); |
| read_unlock(&em_tree->lock); |
| if (em) { |
| test_err("found an unexpected em above 48K"); |
| goto out; |
| } |
| |
| ret = 0; |
| out: |
| free_extent_map(em); |
| /* Unpin our extent to prevent warning when removing it below. */ |
| ret2 = unpin_extent_cache(inode, 0, SZ_16K, 0); |
| if (ret == 0) |
| ret = ret2; |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| /* |
| * Test a regression for compressed extent map adjustment when we attempt to |
| * add an extent map that is partially overlapped by another existing extent |
| * map. The resulting extent map offset was left unchanged despite having |
| * incremented its start offset. |
| */ |
| static int test_case_8(struct btrfs_fs_info *fs_info, struct btrfs_inode *inode) |
| { |
| struct extent_map_tree *em_tree = &inode->extent_tree; |
| struct extent_map *em; |
| int ret; |
| int ret2; |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| return -ENOMEM; |
| } |
| |
| /* Compressed extent for the file range [120K, 128K). */ |
| em->start = SZ_1K * 120; |
| em->len = SZ_8K; |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = SZ_8K; |
| em->flags |= EXTENT_FLAG_COMPRESS_ZLIB; |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, em->start, em->len); |
| write_unlock(&em_tree->lock); |
| free_extent_map(em); |
| if (ret < 0) { |
| test_err("couldn't add extent map for range [120K, 128K)"); |
| goto out; |
| } |
| |
| em = alloc_extent_map(); |
| if (!em) { |
| test_std_err(TEST_ALLOC_EXTENT_MAP); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * Compressed extent for the file range [108K, 144K), which overlaps |
| * with the [120K, 128K) we previously inserted. |
| */ |
| em->start = SZ_1K * 108; |
| em->len = SZ_1K * 36; |
| em->disk_num_bytes = SZ_4K; |
| em->ram_bytes = SZ_1K * 36; |
| em->flags |= EXTENT_FLAG_COMPRESS_ZLIB; |
| |
| /* |
| * Try to add the extent map but with a search range of [140K, 144K), |
| * this should succeed and adjust the extent map to the range |
| * [128K, 144K), with a length of 16K and an offset of 20K. |
| * |
| * This simulates a scenario where in the subvolume tree of an inode we |
| * have a compressed file extent item for the range [108K, 144K) and we |
| * have an overlapping compressed extent map for the range [120K, 128K), |
| * which was created by an encoded write, but its ordered extent was not |
| * yet completed, so the subvolume tree doesn't have yet the file extent |
| * item for that range - we only have the extent map in the inode's |
| * extent map tree. |
| */ |
| write_lock(&em_tree->lock); |
| ret = btrfs_add_extent_mapping(inode, &em, SZ_1K * 140, SZ_4K); |
| write_unlock(&em_tree->lock); |
| free_extent_map(em); |
| if (ret < 0) { |
| test_err("couldn't add extent map for range [108K, 144K)"); |
| goto out; |
| } |
| |
| if (em->start != SZ_128K) { |
| test_err("unexpected extent map start %llu (should be 128K)", em->start); |
| ret = -EINVAL; |
| goto out; |
| } |
| if (em->len != SZ_16K) { |
| test_err("unexpected extent map length %llu (should be 16K)", em->len); |
| ret = -EINVAL; |
| goto out; |
| } |
| if (em->offset != SZ_1K * 20) { |
| test_err("unexpected extent map offset %llu (should be 20K)", em->offset); |
| ret = -EINVAL; |
| goto out; |
| } |
| out: |
| ret2 = free_extent_map_tree(inode); |
| if (ret == 0) |
| ret = ret2; |
| |
| return ret; |
| } |
| |
| struct rmap_test_vector { |
| u64 raid_type; |
| u64 physical_start; |
| u64 data_stripe_size; |
| u64 num_data_stripes; |
| u64 num_stripes; |
| /* Assume we won't have more than 5 physical stripes */ |
| u64 data_stripe_phys_start[5]; |
| bool expected_mapped_addr; |
| /* Physical to logical addresses */ |
| u64 mapped_logical[5]; |
| }; |
| |
| static int test_rmap_block(struct btrfs_fs_info *fs_info, |
| struct rmap_test_vector *test) |
| { |
| struct btrfs_chunk_map *map; |
| u64 *logical = NULL; |
| int i, out_ndaddrs, out_stripe_len; |
| int ret; |
| |
| map = btrfs_alloc_chunk_map(test->num_stripes, GFP_KERNEL); |
| if (!map) { |
| test_std_err(TEST_ALLOC_CHUNK_MAP); |
| return -ENOMEM; |
| } |
| |
| /* Start at 4GiB logical address */ |
| map->start = SZ_4G; |
| map->chunk_len = test->data_stripe_size * test->num_data_stripes; |
| map->stripe_size = test->data_stripe_size; |
| map->num_stripes = test->num_stripes; |
| map->type = test->raid_type; |
| |
| for (i = 0; i < map->num_stripes; i++) { |
| struct btrfs_device *dev = btrfs_alloc_dummy_device(fs_info); |
| |
| if (IS_ERR(dev)) { |
| test_err("cannot allocate device"); |
| ret = PTR_ERR(dev); |
| goto out; |
| } |
| map->stripes[i].dev = dev; |
| map->stripes[i].physical = test->data_stripe_phys_start[i]; |
| } |
| |
| ret = btrfs_add_chunk_map(fs_info, map); |
| if (ret) { |
| test_err("error adding chunk map to mapping tree"); |
| goto out_free; |
| } |
| |
| ret = btrfs_rmap_block(fs_info, map->start, btrfs_sb_offset(1), |
| &logical, &out_ndaddrs, &out_stripe_len); |
| if (ret || (out_ndaddrs == 0 && test->expected_mapped_addr)) { |
| test_err("didn't rmap anything but expected %d", |
| test->expected_mapped_addr); |
| goto out; |
| } |
| |
| if (out_stripe_len != BTRFS_STRIPE_LEN) { |
| test_err("calculated stripe length doesn't match"); |
| goto out; |
| } |
| |
| if (out_ndaddrs != test->expected_mapped_addr) { |
| for (i = 0; i < out_ndaddrs; i++) |
| test_msg("mapped %llu", logical[i]); |
| test_err("unexpected number of mapped addresses: %d", out_ndaddrs); |
| goto out; |
| } |
| |
| for (i = 0; i < out_ndaddrs; i++) { |
| if (logical[i] != test->mapped_logical[i]) { |
| test_err("unexpected logical address mapped"); |
| goto out; |
| } |
| } |
| |
| ret = 0; |
| out: |
| btrfs_remove_chunk_map(fs_info, map); |
| out_free: |
| kfree(logical); |
| return ret; |
| } |
| |
| int btrfs_test_extent_map(void) |
| { |
| struct btrfs_fs_info *fs_info = NULL; |
| struct inode *inode; |
| struct btrfs_root *root = NULL; |
| int ret = 0, i; |
| struct rmap_test_vector rmap_tests[] = { |
| { |
| /* |
| * Test a chunk with 2 data stripes one of which |
| * intersects the physical address of the super block |
| * is correctly recognised. |
| */ |
| .raid_type = BTRFS_BLOCK_GROUP_RAID1, |
| .physical_start = SZ_64M - SZ_4M, |
| .data_stripe_size = SZ_256M, |
| .num_data_stripes = 2, |
| .num_stripes = 2, |
| .data_stripe_phys_start = |
| {SZ_64M - SZ_4M, SZ_64M - SZ_4M + SZ_256M}, |
| .expected_mapped_addr = true, |
| .mapped_logical= {SZ_4G + SZ_4M} |
| }, |
| { |
| /* |
| * Test that out-of-range physical addresses are |
| * ignored |
| */ |
| |
| /* SINGLE chunk type */ |
| .raid_type = 0, |
| .physical_start = SZ_4G, |
| .data_stripe_size = SZ_256M, |
| .num_data_stripes = 1, |
| .num_stripes = 1, |
| .data_stripe_phys_start = {SZ_256M}, |
| .expected_mapped_addr = false, |
| .mapped_logical = {0} |
| } |
| }; |
| |
| test_msg("running extent_map tests"); |
| |
| /* |
| * Note: the fs_info is not set up completely, we only need |
| * fs_info::fsid for the tracepoint. |
| */ |
| fs_info = btrfs_alloc_dummy_fs_info(PAGE_SIZE, PAGE_SIZE); |
| if (!fs_info) { |
| test_std_err(TEST_ALLOC_FS_INFO); |
| return -ENOMEM; |
| } |
| |
| inode = btrfs_new_test_inode(); |
| if (!inode) { |
| test_std_err(TEST_ALLOC_INODE); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| root = btrfs_alloc_dummy_root(fs_info); |
| if (IS_ERR(root)) { |
| test_std_err(TEST_ALLOC_ROOT); |
| ret = PTR_ERR(root); |
| root = NULL; |
| goto out; |
| } |
| |
| BTRFS_I(inode)->root = root; |
| |
| ret = test_case_1(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_2(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_3(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_4(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_5(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_6(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_7(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| ret = test_case_8(fs_info, BTRFS_I(inode)); |
| if (ret) |
| goto out; |
| |
| test_msg("running rmap tests"); |
| for (i = 0; i < ARRAY_SIZE(rmap_tests); i++) { |
| ret = test_rmap_block(fs_info, &rmap_tests[i]); |
| if (ret) |
| goto out; |
| } |
| |
| out: |
| iput(inode); |
| btrfs_free_dummy_root(root); |
| btrfs_free_dummy_fs_info(fs_info); |
| |
| return ret; |
| } |