| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * MAX77620 pin control driver. |
| * |
| * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. |
| * |
| * Author: |
| * Chaitanya Bandi <bandik@nvidia.com> |
| * Laxman Dewangan <ldewangan@nvidia.com> |
| */ |
| |
| #include <linux/mfd/max77620.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #include "core.h" |
| #include "pinconf.h" |
| #include "pinctrl-utils.h" |
| |
| #define MAX77620_PIN_NUM 8 |
| |
| enum max77620_pin_ppdrv { |
| MAX77620_PIN_UNCONFIG_DRV, |
| MAX77620_PIN_OD_DRV, |
| MAX77620_PIN_PP_DRV, |
| }; |
| |
| #define MAX77620_ACTIVE_FPS_SOURCE (PIN_CONFIG_END + 1) |
| #define MAX77620_ACTIVE_FPS_POWER_ON_SLOTS (PIN_CONFIG_END + 2) |
| #define MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS (PIN_CONFIG_END + 3) |
| #define MAX77620_SUSPEND_FPS_SOURCE (PIN_CONFIG_END + 4) |
| #define MAX77620_SUSPEND_FPS_POWER_ON_SLOTS (PIN_CONFIG_END + 5) |
| #define MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS (PIN_CONFIG_END + 6) |
| |
| struct max77620_pin_function { |
| const char *name; |
| const char * const *groups; |
| unsigned int ngroups; |
| int mux_option; |
| }; |
| |
| static const struct pinconf_generic_params max77620_cfg_params[] = { |
| { |
| .property = "maxim,active-fps-source", |
| .param = MAX77620_ACTIVE_FPS_SOURCE, |
| }, { |
| .property = "maxim,active-fps-power-up-slot", |
| .param = MAX77620_ACTIVE_FPS_POWER_ON_SLOTS, |
| }, { |
| .property = "maxim,active-fps-power-down-slot", |
| .param = MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS, |
| }, { |
| .property = "maxim,suspend-fps-source", |
| .param = MAX77620_SUSPEND_FPS_SOURCE, |
| }, { |
| .property = "maxim,suspend-fps-power-up-slot", |
| .param = MAX77620_SUSPEND_FPS_POWER_ON_SLOTS, |
| }, { |
| .property = "maxim,suspend-fps-power-down-slot", |
| .param = MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS, |
| }, |
| }; |
| |
| enum max77620_alternate_pinmux_option { |
| MAX77620_PINMUX_GPIO = 0, |
| MAX77620_PINMUX_LOW_POWER_MODE_CONTROL_IN = 1, |
| MAX77620_PINMUX_FLEXIBLE_POWER_SEQUENCER_OUT = 2, |
| MAX77620_PINMUX_32K_OUT1 = 3, |
| MAX77620_PINMUX_SD0_DYNAMIC_VOLTAGE_SCALING_IN = 4, |
| MAX77620_PINMUX_SD1_DYNAMIC_VOLTAGE_SCALING_IN = 5, |
| MAX77620_PINMUX_REFERENCE_OUT = 6, |
| }; |
| |
| struct max77620_pingroup { |
| const char *name; |
| const unsigned int pins[1]; |
| unsigned int npins; |
| enum max77620_alternate_pinmux_option alt_option; |
| }; |
| |
| struct max77620_pin_info { |
| enum max77620_pin_ppdrv drv_type; |
| }; |
| |
| struct max77620_fps_config { |
| int active_fps_src; |
| int active_power_up_slots; |
| int active_power_down_slots; |
| int suspend_fps_src; |
| int suspend_power_up_slots; |
| int suspend_power_down_slots; |
| }; |
| |
| struct max77620_pctrl_info { |
| struct device *dev; |
| struct pinctrl_dev *pctl; |
| struct regmap *rmap; |
| const struct max77620_pin_function *functions; |
| unsigned int num_functions; |
| const struct max77620_pingroup *pin_groups; |
| int num_pin_groups; |
| const struct pinctrl_pin_desc *pins; |
| unsigned int num_pins; |
| struct max77620_pin_info pin_info[MAX77620_PIN_NUM]; |
| struct max77620_fps_config fps_config[MAX77620_PIN_NUM]; |
| }; |
| |
| static const struct pinctrl_pin_desc max77620_pins_desc[] = { |
| PINCTRL_PIN(MAX77620_GPIO0, "gpio0"), |
| PINCTRL_PIN(MAX77620_GPIO1, "gpio1"), |
| PINCTRL_PIN(MAX77620_GPIO2, "gpio2"), |
| PINCTRL_PIN(MAX77620_GPIO3, "gpio3"), |
| PINCTRL_PIN(MAX77620_GPIO4, "gpio4"), |
| PINCTRL_PIN(MAX77620_GPIO5, "gpio5"), |
| PINCTRL_PIN(MAX77620_GPIO6, "gpio6"), |
| PINCTRL_PIN(MAX77620_GPIO7, "gpio7"), |
| }; |
| |
| static const char * const gpio_groups[] = { |
| "gpio0", |
| "gpio1", |
| "gpio2", |
| "gpio3", |
| "gpio4", |
| "gpio5", |
| "gpio6", |
| "gpio7", |
| }; |
| |
| #define FUNCTION_GROUP(fname, mux) \ |
| { \ |
| .name = fname, \ |
| .groups = gpio_groups, \ |
| .ngroups = ARRAY_SIZE(gpio_groups), \ |
| .mux_option = MAX77620_PINMUX_##mux, \ |
| } |
| |
| static const struct max77620_pin_function max77620_pin_function[] = { |
| FUNCTION_GROUP("gpio", GPIO), |
| FUNCTION_GROUP("lpm-control-in", LOW_POWER_MODE_CONTROL_IN), |
| FUNCTION_GROUP("fps-out", FLEXIBLE_POWER_SEQUENCER_OUT), |
| FUNCTION_GROUP("32k-out1", 32K_OUT1), |
| FUNCTION_GROUP("sd0-dvs-in", SD0_DYNAMIC_VOLTAGE_SCALING_IN), |
| FUNCTION_GROUP("sd1-dvs-in", SD1_DYNAMIC_VOLTAGE_SCALING_IN), |
| FUNCTION_GROUP("reference-out", REFERENCE_OUT), |
| }; |
| |
| #define MAX77620_PINGROUP(pg_name, pin_id, option) \ |
| { \ |
| .name = #pg_name, \ |
| .pins = {MAX77620_##pin_id}, \ |
| .npins = 1, \ |
| .alt_option = MAX77620_PINMUX_##option, \ |
| } |
| |
| static const struct max77620_pingroup max77620_pingroups[] = { |
| MAX77620_PINGROUP(gpio0, GPIO0, LOW_POWER_MODE_CONTROL_IN), |
| MAX77620_PINGROUP(gpio1, GPIO1, FLEXIBLE_POWER_SEQUENCER_OUT), |
| MAX77620_PINGROUP(gpio2, GPIO2, FLEXIBLE_POWER_SEQUENCER_OUT), |
| MAX77620_PINGROUP(gpio3, GPIO3, FLEXIBLE_POWER_SEQUENCER_OUT), |
| MAX77620_PINGROUP(gpio4, GPIO4, 32K_OUT1), |
| MAX77620_PINGROUP(gpio5, GPIO5, SD0_DYNAMIC_VOLTAGE_SCALING_IN), |
| MAX77620_PINGROUP(gpio6, GPIO6, SD1_DYNAMIC_VOLTAGE_SCALING_IN), |
| MAX77620_PINGROUP(gpio7, GPIO7, REFERENCE_OUT), |
| }; |
| |
| static int max77620_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return mpci->num_pin_groups; |
| } |
| |
| static const char *max77620_pinctrl_get_group_name( |
| struct pinctrl_dev *pctldev, unsigned int group) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return mpci->pin_groups[group].name; |
| } |
| |
| static int max77620_pinctrl_get_group_pins( |
| struct pinctrl_dev *pctldev, unsigned int group, |
| const unsigned int **pins, unsigned int *num_pins) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| |
| *pins = mpci->pin_groups[group].pins; |
| *num_pins = mpci->pin_groups[group].npins; |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops max77620_pinctrl_ops = { |
| .get_groups_count = max77620_pinctrl_get_groups_count, |
| .get_group_name = max77620_pinctrl_get_group_name, |
| .get_group_pins = max77620_pinctrl_get_group_pins, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, |
| .dt_free_map = pinctrl_utils_free_map, |
| }; |
| |
| static int max77620_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return mpci->num_functions; |
| } |
| |
| static const char *max77620_pinctrl_get_func_name(struct pinctrl_dev *pctldev, |
| unsigned int function) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return mpci->functions[function].name; |
| } |
| |
| static int max77620_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, |
| unsigned int function, |
| const char * const **groups, |
| unsigned int * const num_groups) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| |
| *groups = mpci->functions[function].groups; |
| *num_groups = mpci->functions[function].ngroups; |
| |
| return 0; |
| } |
| |
| static int max77620_pinctrl_enable(struct pinctrl_dev *pctldev, |
| unsigned int function, unsigned int group) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| u8 val; |
| int ret; |
| |
| if (function == MAX77620_PINMUX_GPIO) { |
| val = 0; |
| } else if (function == mpci->pin_groups[group].alt_option) { |
| val = 1 << group; |
| } else { |
| dev_err(mpci->dev, "GPIO %u doesn't have function %u\n", |
| group, function); |
| return -EINVAL; |
| } |
| ret = regmap_update_bits(mpci->rmap, MAX77620_REG_AME_GPIO, |
| BIT(group), val); |
| if (ret < 0) |
| dev_err(mpci->dev, "REG AME GPIO update failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct pinmux_ops max77620_pinmux_ops = { |
| .get_functions_count = max77620_pinctrl_get_funcs_count, |
| .get_function_name = max77620_pinctrl_get_func_name, |
| .get_function_groups = max77620_pinctrl_get_func_groups, |
| .set_mux = max77620_pinctrl_enable, |
| }; |
| |
| static int max77620_pinconf_get(struct pinctrl_dev *pctldev, |
| unsigned int pin, unsigned long *config) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| struct device *dev = mpci->dev; |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| unsigned int val; |
| int arg = 0; |
| int ret; |
| |
| switch (param) { |
| case PIN_CONFIG_DRIVE_OPEN_DRAIN: |
| if (mpci->pin_info[pin].drv_type == MAX77620_PIN_OD_DRV) |
| arg = 1; |
| break; |
| |
| case PIN_CONFIG_DRIVE_PUSH_PULL: |
| if (mpci->pin_info[pin].drv_type == MAX77620_PIN_PP_DRV) |
| arg = 1; |
| break; |
| |
| case PIN_CONFIG_BIAS_PULL_UP: |
| ret = regmap_read(mpci->rmap, MAX77620_REG_PUE_GPIO, &val); |
| if (ret < 0) { |
| dev_err(dev, "Reg PUE_GPIO read failed: %d\n", ret); |
| return ret; |
| } |
| if (val & BIT(pin)) |
| arg = 1; |
| break; |
| |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| ret = regmap_read(mpci->rmap, MAX77620_REG_PDE_GPIO, &val); |
| if (ret < 0) { |
| dev_err(dev, "Reg PDE_GPIO read failed: %d\n", ret); |
| return ret; |
| } |
| if (val & BIT(pin)) |
| arg = 1; |
| break; |
| |
| default: |
| dev_err(dev, "Properties not supported\n"); |
| return -ENOTSUPP; |
| } |
| |
| *config = pinconf_to_config_packed(param, (u16)arg); |
| |
| return 0; |
| } |
| |
| static int max77620_get_default_fps(struct max77620_pctrl_info *mpci, |
| int addr, int *fps) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(mpci->rmap, addr, &val); |
| if (ret < 0) { |
| dev_err(mpci->dev, "Reg PUE_GPIO read failed: %d\n", ret); |
| return ret; |
| } |
| *fps = (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT; |
| |
| return 0; |
| } |
| |
| static int max77620_set_fps_param(struct max77620_pctrl_info *mpci, |
| int pin, int param) |
| { |
| struct max77620_fps_config *fps_config = &mpci->fps_config[pin]; |
| int addr, ret; |
| int param_val; |
| int mask, shift; |
| |
| if ((pin < MAX77620_GPIO1) || (pin > MAX77620_GPIO3)) |
| return 0; |
| |
| addr = MAX77620_REG_FPS_GPIO1 + pin - 1; |
| switch (param) { |
| case MAX77620_ACTIVE_FPS_SOURCE: |
| case MAX77620_SUSPEND_FPS_SOURCE: |
| mask = MAX77620_FPS_SRC_MASK; |
| shift = MAX77620_FPS_SRC_SHIFT; |
| param_val = fps_config->active_fps_src; |
| if (param == MAX77620_SUSPEND_FPS_SOURCE) |
| param_val = fps_config->suspend_fps_src; |
| break; |
| |
| case MAX77620_ACTIVE_FPS_POWER_ON_SLOTS: |
| case MAX77620_SUSPEND_FPS_POWER_ON_SLOTS: |
| mask = MAX77620_FPS_PU_PERIOD_MASK; |
| shift = MAX77620_FPS_PU_PERIOD_SHIFT; |
| param_val = fps_config->active_power_up_slots; |
| if (param == MAX77620_SUSPEND_FPS_POWER_ON_SLOTS) |
| param_val = fps_config->suspend_power_up_slots; |
| break; |
| |
| case MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS: |
| case MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS: |
| mask = MAX77620_FPS_PD_PERIOD_MASK; |
| shift = MAX77620_FPS_PD_PERIOD_SHIFT; |
| param_val = fps_config->active_power_down_slots; |
| if (param == MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS) |
| param_val = fps_config->suspend_power_down_slots; |
| break; |
| |
| default: |
| dev_err(mpci->dev, "Invalid parameter %d for pin %d\n", |
| param, pin); |
| return -EINVAL; |
| } |
| |
| if (param_val < 0) |
| return 0; |
| |
| ret = regmap_update_bits(mpci->rmap, addr, mask, param_val << shift); |
| if (ret < 0) |
| dev_err(mpci->dev, "Reg 0x%02x update failed %d\n", addr, ret); |
| |
| return ret; |
| } |
| |
| static int max77620_pinconf_set(struct pinctrl_dev *pctldev, |
| unsigned int pin, unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct max77620_pctrl_info *mpci = pinctrl_dev_get_drvdata(pctldev); |
| struct device *dev = mpci->dev; |
| struct max77620_fps_config *fps_config; |
| int param; |
| u32 param_val; |
| unsigned int val; |
| unsigned int pu_val; |
| unsigned int pd_val; |
| int addr, ret; |
| int i; |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| param_val = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_DRIVE_OPEN_DRAIN: |
| val = param_val ? 0 : 1; |
| ret = regmap_update_bits(mpci->rmap, |
| MAX77620_REG_GPIO0 + pin, |
| MAX77620_CNFG_GPIO_DRV_MASK, |
| val); |
| if (ret) |
| goto report_update_failure; |
| |
| mpci->pin_info[pin].drv_type = val ? |
| MAX77620_PIN_PP_DRV : MAX77620_PIN_OD_DRV; |
| break; |
| |
| case PIN_CONFIG_DRIVE_PUSH_PULL: |
| val = param_val ? 1 : 0; |
| ret = regmap_update_bits(mpci->rmap, |
| MAX77620_REG_GPIO0 + pin, |
| MAX77620_CNFG_GPIO_DRV_MASK, |
| val); |
| if (ret) |
| goto report_update_failure; |
| |
| mpci->pin_info[pin].drv_type = val ? |
| MAX77620_PIN_PP_DRV : MAX77620_PIN_OD_DRV; |
| break; |
| |
| case MAX77620_ACTIVE_FPS_SOURCE: |
| case MAX77620_ACTIVE_FPS_POWER_ON_SLOTS: |
| case MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS: |
| if ((pin < MAX77620_GPIO1) || (pin > MAX77620_GPIO3)) |
| return -EINVAL; |
| |
| fps_config = &mpci->fps_config[pin]; |
| |
| if ((param == MAX77620_ACTIVE_FPS_SOURCE) && |
| (param_val == MAX77620_FPS_SRC_DEF)) { |
| addr = MAX77620_REG_FPS_GPIO1 + pin - 1; |
| ret = max77620_get_default_fps( |
| mpci, addr, |
| &fps_config->active_fps_src); |
| if (ret < 0) |
| return ret; |
| break; |
| } |
| |
| if (param == MAX77620_ACTIVE_FPS_SOURCE) |
| fps_config->active_fps_src = param_val; |
| else if (param == MAX77620_ACTIVE_FPS_POWER_ON_SLOTS) |
| fps_config->active_power_up_slots = param_val; |
| else |
| fps_config->active_power_down_slots = param_val; |
| |
| ret = max77620_set_fps_param(mpci, pin, param); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case MAX77620_SUSPEND_FPS_SOURCE: |
| case MAX77620_SUSPEND_FPS_POWER_ON_SLOTS: |
| case MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS: |
| if ((pin < MAX77620_GPIO1) || (pin > MAX77620_GPIO3)) |
| return -EINVAL; |
| |
| fps_config = &mpci->fps_config[pin]; |
| |
| if ((param == MAX77620_SUSPEND_FPS_SOURCE) && |
| (param_val == MAX77620_FPS_SRC_DEF)) { |
| addr = MAX77620_REG_FPS_GPIO1 + pin - 1; |
| ret = max77620_get_default_fps( |
| mpci, addr, |
| &fps_config->suspend_fps_src); |
| if (ret < 0) |
| return ret; |
| break; |
| } |
| |
| if (param == MAX77620_SUSPEND_FPS_SOURCE) |
| fps_config->suspend_fps_src = param_val; |
| else if (param == MAX77620_SUSPEND_FPS_POWER_ON_SLOTS) |
| fps_config->suspend_power_up_slots = param_val; |
| else |
| fps_config->suspend_power_down_slots = |
| param_val; |
| break; |
| |
| case PIN_CONFIG_BIAS_PULL_UP: |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| pu_val = (param == PIN_CONFIG_BIAS_PULL_UP) ? |
| BIT(pin) : 0; |
| pd_val = (param == PIN_CONFIG_BIAS_PULL_DOWN) ? |
| BIT(pin) : 0; |
| |
| ret = regmap_update_bits(mpci->rmap, |
| MAX77620_REG_PUE_GPIO, |
| BIT(pin), pu_val); |
| if (ret < 0) { |
| dev_err(dev, "PUE_GPIO update failed: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(mpci->rmap, |
| MAX77620_REG_PDE_GPIO, |
| BIT(pin), pd_val); |
| if (ret < 0) { |
| dev_err(dev, "PDE_GPIO update failed: %d\n", |
| ret); |
| return ret; |
| } |
| break; |
| |
| default: |
| dev_err(dev, "Properties not supported\n"); |
| return -ENOTSUPP; |
| } |
| } |
| |
| return 0; |
| |
| report_update_failure: |
| dev_err(dev, "Reg 0x%02x update failed %d\n", |
| MAX77620_REG_GPIO0 + pin, ret); |
| return ret; |
| } |
| |
| static const struct pinconf_ops max77620_pinconf_ops = { |
| .pin_config_get = max77620_pinconf_get, |
| .pin_config_set = max77620_pinconf_set, |
| }; |
| |
| static struct pinctrl_desc max77620_pinctrl_desc = { |
| .pctlops = &max77620_pinctrl_ops, |
| .pmxops = &max77620_pinmux_ops, |
| .confops = &max77620_pinconf_ops, |
| }; |
| |
| static int max77620_pinctrl_probe(struct platform_device *pdev) |
| { |
| struct max77620_chip *max77620 = dev_get_drvdata(pdev->dev.parent); |
| struct max77620_pctrl_info *mpci; |
| int i; |
| |
| device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent)); |
| |
| mpci = devm_kzalloc(&pdev->dev, sizeof(*mpci), GFP_KERNEL); |
| if (!mpci) |
| return -ENOMEM; |
| |
| mpci->dev = &pdev->dev; |
| mpci->rmap = max77620->rmap; |
| |
| mpci->pins = max77620_pins_desc; |
| mpci->num_pins = ARRAY_SIZE(max77620_pins_desc); |
| mpci->functions = max77620_pin_function; |
| mpci->num_functions = ARRAY_SIZE(max77620_pin_function); |
| mpci->pin_groups = max77620_pingroups; |
| mpci->num_pin_groups = ARRAY_SIZE(max77620_pingroups); |
| platform_set_drvdata(pdev, mpci); |
| |
| max77620_pinctrl_desc.name = dev_name(&pdev->dev); |
| max77620_pinctrl_desc.pins = max77620_pins_desc; |
| max77620_pinctrl_desc.npins = ARRAY_SIZE(max77620_pins_desc); |
| max77620_pinctrl_desc.num_custom_params = |
| ARRAY_SIZE(max77620_cfg_params); |
| max77620_pinctrl_desc.custom_params = max77620_cfg_params; |
| |
| for (i = 0; i < MAX77620_PIN_NUM; ++i) { |
| mpci->fps_config[i].active_fps_src = -1; |
| mpci->fps_config[i].active_power_up_slots = -1; |
| mpci->fps_config[i].active_power_down_slots = -1; |
| mpci->fps_config[i].suspend_fps_src = -1; |
| mpci->fps_config[i].suspend_power_up_slots = -1; |
| mpci->fps_config[i].suspend_power_down_slots = -1; |
| } |
| |
| mpci->pctl = devm_pinctrl_register(&pdev->dev, &max77620_pinctrl_desc, |
| mpci); |
| if (IS_ERR(mpci->pctl)) { |
| dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); |
| return PTR_ERR(mpci->pctl); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int max77620_suspend_fps_param[] = { |
| MAX77620_SUSPEND_FPS_SOURCE, |
| MAX77620_SUSPEND_FPS_POWER_ON_SLOTS, |
| MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS, |
| }; |
| |
| static int max77620_active_fps_param[] = { |
| MAX77620_ACTIVE_FPS_SOURCE, |
| MAX77620_ACTIVE_FPS_POWER_ON_SLOTS, |
| MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS, |
| }; |
| |
| static int max77620_pinctrl_suspend(struct device *dev) |
| { |
| struct max77620_pctrl_info *mpci = dev_get_drvdata(dev); |
| int pin, p; |
| |
| for (pin = 0; pin < MAX77620_PIN_NUM; ++pin) { |
| if ((pin < MAX77620_GPIO1) || (pin > MAX77620_GPIO3)) |
| continue; |
| for (p = 0; p < 3; ++p) |
| max77620_set_fps_param( |
| mpci, pin, max77620_suspend_fps_param[p]); |
| } |
| |
| return 0; |
| }; |
| |
| static int max77620_pinctrl_resume(struct device *dev) |
| { |
| struct max77620_pctrl_info *mpci = dev_get_drvdata(dev); |
| int pin, p; |
| |
| for (pin = 0; pin < MAX77620_PIN_NUM; ++pin) { |
| if ((pin < MAX77620_GPIO1) || (pin > MAX77620_GPIO3)) |
| continue; |
| for (p = 0; p < 3; ++p) |
| max77620_set_fps_param( |
| mpci, pin, max77620_active_fps_param[p]); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops max77620_pinctrl_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS( |
| max77620_pinctrl_suspend, max77620_pinctrl_resume) |
| }; |
| |
| static const struct platform_device_id max77620_pinctrl_devtype[] = { |
| { .name = "max77620-pinctrl", }, |
| { .name = "max20024-pinctrl", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(platform, max77620_pinctrl_devtype); |
| |
| static struct platform_driver max77620_pinctrl_driver = { |
| .driver = { |
| .name = "max77620-pinctrl", |
| .pm = &max77620_pinctrl_pm_ops, |
| }, |
| .probe = max77620_pinctrl_probe, |
| .id_table = max77620_pinctrl_devtype, |
| }; |
| |
| module_platform_driver(max77620_pinctrl_driver); |
| |
| MODULE_DESCRIPTION("MAX77620/MAX20024 pin control driver"); |
| MODULE_AUTHOR("Chaitanya Bandi<bandik@nvidia.com>"); |
| MODULE_AUTHOR("Laxman Dewangan<ldewangan@nvidia.com>"); |
| MODULE_LICENSE("GPL v2"); |