| == MediaTek MT7622 pinctrl controller == |
| |
| Required properties for the root node: |
| - compatible: Should be one of the following |
| "mediatek,mt7622-pinctrl" for MT7622 SoC |
| "mediatek,mt7629-pinctrl" for MT7629 SoC |
| - reg: offset and length of the pinctrl space |
| |
| - gpio-controller: Marks the device node as a GPIO controller. |
| - #gpio-cells: Should be two. The first cell is the pin number and the |
| second is the GPIO flags. |
| |
| Optional properties: |
| - interrupt-controller : Marks the device node as an interrupt controller |
| |
| If the property interrupt-controller is defined, following property is required |
| - reg-names: A string describing the "reg" entries. Must contain "eint". |
| - interrupts : The interrupt output from the controller. |
| - #interrupt-cells: Should be two. |
| |
| Please refer to pinctrl-bindings.txt in this directory for details of the |
| common pinctrl bindings used by client devices, including the meaning of the |
| phrase "pin configuration node". |
| |
| MT7622 pin configuration nodes act as a container for an arbitrary number of |
| subnodes. Each of these subnodes represents some desired configuration for a |
| pin, a group, or a list of pins or groups. This configuration can include the |
| mux function to select on those pin(s)/group(s), and various pin configuration |
| parameters, such as pull-up, slew rate, etc. |
| |
| We support 2 types of configuration nodes. Those nodes can be either pinmux |
| nodes or pinconf nodes. Each configuration node can consist of multiple nodes |
| describing the pinmux and pinconf options. |
| |
| The name of each subnode doesn't matter as long as it is unique; all subnodes |
| should be enumerated and processed purely based on their content. |
| |
| == pinmux nodes content == |
| |
| The following generic properties as defined in pinctrl-bindings.txt are valid |
| to specify in a pinmux subnode: |
| |
| Required properties are: |
| - groups: An array of strings. Each string contains the name of a group. |
| Valid values for these names are listed below. |
| - function: A string containing the name of the function to mux to the |
| group. Valid values for function names are listed below. |
| |
| == pinconf nodes content == |
| |
| The following generic properties as defined in pinctrl-bindings.txt are valid |
| to specify in a pinconf subnode: |
| |
| Required properties are: |
| - pins: An array of strings. Each string contains the name of a pin. |
| Valid values for these names are listed below. |
| - groups: An array of strings. Each string contains the name of a group. |
| Valid values for these names are listed below. |
| |
| Optional properies are: |
| bias-disable, bias-pull, bias-pull-down, input-enable, |
| input-schmitt-enable, input-schmitt-disable, output-enable |
| output-low, output-high, drive-strength, slew-rate |
| |
| Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for |
| slower slew rate respectively. |
| Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA. |
| |
| The following specific properties as defined are valid to specify in a pinconf |
| subnode: |
| |
| Optional properties are: |
| - mediatek,tdsel: An integer describing the steps for output level shifter duty |
| cycle when asserted (high pulse width adjustment). Valid arguments are from 0 |
| to 15. |
| - mediatek,rdsel: An integer describing the steps for input level shifter duty |
| cycle when asserted (high pulse width adjustment). Valid arguments are from 0 |
| to 63. |
| |
| == Valid values for pins, function and groups on MT7622 == |
| |
| Valid values for pins are: |
| pins can be referenced via the pin names as the below table shown and the |
| related physical number is also put ahead of those names which helps cross |
| references to pins between groups to know whether pins assignment conflict |
| happens among devices try to acquire those available pins. |
| |
| Pin #: Valid values for pins |
| ----------------------------- |
| PIN 0: "GPIO_A" |
| PIN 1: "I2S1_IN" |
| PIN 2: "I2S1_OUT" |
| PIN 3: "I2S_BCLK" |
| PIN 4: "I2S_WS" |
| PIN 5: "I2S_MCLK" |
| PIN 6: "TXD0" |
| PIN 7: "RXD0" |
| PIN 8: "SPI_WP" |
| PIN 9: "SPI_HOLD" |
| PIN 10: "SPI_CLK" |
| PIN 11: "SPI_MOSI" |
| PIN 12: "SPI_MISO" |
| PIN 13: "SPI_CS" |
| PIN 14: "I2C_SDA" |
| PIN 15: "I2C_SCL" |
| PIN 16: "I2S2_IN" |
| PIN 17: "I2S3_IN" |
| PIN 18: "I2S4_IN" |
| PIN 19: "I2S2_OUT" |
| PIN 20: "I2S3_OUT" |
| PIN 21: "I2S4_OUT" |
| PIN 22: "GPIO_B" |
| PIN 23: "MDC" |
| PIN 24: "MDIO" |
| PIN 25: "G2_TXD0" |
| PIN 26: "G2_TXD1" |
| PIN 27: "G2_TXD2" |
| PIN 28: "G2_TXD3" |
| PIN 29: "G2_TXEN" |
| PIN 30: "G2_TXC" |
| PIN 31: "G2_RXD0" |
| PIN 32: "G2_RXD1" |
| PIN 33: "G2_RXD2" |
| PIN 34: "G2_RXD3" |
| PIN 35: "G2_RXDV" |
| PIN 36: "G2_RXC" |
| PIN 37: "NCEB" |
| PIN 38: "NWEB" |
| PIN 39: "NREB" |
| PIN 40: "NDL4" |
| PIN 41: "NDL5" |
| PIN 42: "NDL6" |
| PIN 43: "NDL7" |
| PIN 44: "NRB" |
| PIN 45: "NCLE" |
| PIN 46: "NALE" |
| PIN 47: "NDL0" |
| PIN 48: "NDL1" |
| PIN 49: "NDL2" |
| PIN 50: "NDL3" |
| PIN 51: "MDI_TP_P0" |
| PIN 52: "MDI_TN_P0" |
| PIN 53: "MDI_RP_P0" |
| PIN 54: "MDI_RN_P0" |
| PIN 55: "MDI_TP_P1" |
| PIN 56: "MDI_TN_P1" |
| PIN 57: "MDI_RP_P1" |
| PIN 58: "MDI_RN_P1" |
| PIN 59: "MDI_RP_P2" |
| PIN 60: "MDI_RN_P2" |
| PIN 61: "MDI_TP_P2" |
| PIN 62: "MDI_TN_P2" |
| PIN 63: "MDI_TP_P3" |
| PIN 64: "MDI_TN_P3" |
| PIN 65: "MDI_RP_P3" |
| PIN 66: "MDI_RN_P3" |
| PIN 67: "MDI_RP_P4" |
| PIN 68: "MDI_RN_P4" |
| PIN 69: "MDI_TP_P4" |
| PIN 70: "MDI_TN_P4" |
| PIN 71: "PMIC_SCL" |
| PIN 72: "PMIC_SDA" |
| PIN 73: "SPIC1_CLK" |
| PIN 74: "SPIC1_MOSI" |
| PIN 75: "SPIC1_MISO" |
| PIN 76: "SPIC1_CS" |
| PIN 77: "GPIO_D" |
| PIN 78: "WATCHDOG" |
| PIN 79: "RTS3_N" |
| PIN 80: "CTS3_N" |
| PIN 81: "TXD3" |
| PIN 82: "RXD3" |
| PIN 83: "PERST0_N" |
| PIN 84: "PERST1_N" |
| PIN 85: "WLED_N" |
| PIN 86: "EPHY_LED0_N" |
| PIN 87: "AUXIN0" |
| PIN 88: "AUXIN1" |
| PIN 89: "AUXIN2" |
| PIN 90: "AUXIN3" |
| PIN 91: "TXD4" |
| PIN 92: "RXD4" |
| PIN 93: "RTS4_N" |
| PIN 94: "CST4_N" |
| PIN 95: "PWM1" |
| PIN 96: "PWM2" |
| PIN 97: "PWM3" |
| PIN 98: "PWM4" |
| PIN 99: "PWM5" |
| PIN 100: "PWM6" |
| PIN 101: "PWM7" |
| PIN 102: "GPIO_E" |
| |
| Valid values for function are: |
| "emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie", |
| "pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog" |
| |
| Valid values for groups are: |
| additional data is put followingly with valid value allowing us to know which |
| applicable function and which relevant pins (in pin#) are able applied for that |
| group. |
| |
| Valid value function pins (in pin#) |
| ------------------------------------------------------------------------- |
| "emmc" "emmc" 40, 41, 42, 43, 44, 45, |
| 47, 48, 49, 50 |
| "emmc_rst" "emmc" 37 |
| "esw" "eth" 51, 52, 53, 54, 55, 56, |
| 57, 58, 59, 60, 61, 62, |
| 63, 64, 65, 66, 67, 68, |
| 69, 70 |
| "esw_p0_p1" "eth" 51, 52, 53, 54, 55, 56, |
| 57, 58 |
| "esw_p2_p3_p4" "eth" 59, 60, 61, 62, 63, 64, |
| 65, 66, 67, 68, 69, 70 |
| "rgmii_via_esw" "eth" 59, 60, 61, 62, 63, 64, |
| 65, 66, 67, 68, 69, 70 |
| "rgmii_via_gmac1" "eth" 59, 60, 61, 62, 63, 64, |
| 65, 66, 67, 68, 69, 70 |
| "rgmii_via_gmac2" "eth" 25, 26, 27, 28, 29, 30, |
| 31, 32, 33, 34, 35, 36 |
| "mdc_mdio" "eth" 23, 24 |
| "i2c0" "i2c" 14, 15 |
| "i2c1_0" "i2c" 55, 56 |
| "i2c1_1" "i2c" 73, 74 |
| "i2c1_2" "i2c" 87, 88 |
| "i2c2_0" "i2c" 57, 58 |
| "i2c2_1" "i2c" 75, 76 |
| "i2c2_2" "i2c" 89, 90 |
| "i2s_in_mclk_bclk_ws" "i2s" 3, 4, 5 |
| "i2s1_in_data" "i2s" 1 |
| "i2s2_in_data" "i2s" 16 |
| "i2s3_in_data" "i2s" 17 |
| "i2s4_in_data" "i2s" 18 |
| "i2s_out_mclk_bclk_ws" "i2s" 3, 4, 5 |
| "i2s1_out_data" "i2s" 2 |
| "i2s2_out_data" "i2s" 19 |
| "i2s3_out_data" "i2s" 20 |
| "i2s4_out_data" "i2s" 21 |
| "ir_0_tx" "ir" 16 |
| "ir_1_tx" "ir" 59 |
| "ir_2_tx" "ir" 99 |
| "ir_0_rx" "ir" 17 |
| "ir_1_rx" "ir" 60 |
| "ir_2_rx" "ir" 100 |
| "ephy_leds" "led" 86, 91, 92, 93, 94 |
| "ephy0_led" "led" 86 |
| "ephy1_led" "led" 91 |
| "ephy2_led" "led" 92 |
| "ephy3_led" "led" 93 |
| "ephy4_led" "led" 94 |
| "wled" "led" 85 |
| "par_nand" "flash" 37, 38, 39, 40, 41, 42, |
| 43, 44, 45, 46, 47, 48, |
| 49, 50 |
| "snfi" "flash" 8, 9, 10, 11, 12, 13 |
| "spi_nor" "flash" 8, 9, 10, 11, 12, 13 |
| "pcie0_0_waken" "pcie" 14 |
| "pcie0_1_waken" "pcie" 79 |
| "pcie1_0_waken" "pcie" 14 |
| "pcie0_0_clkreq" "pcie" 15 |
| "pcie0_1_clkreq" "pcie" 80 |
| "pcie1_0_clkreq" "pcie" 15 |
| "pcie0_pad_perst" "pcie" 83 |
| "pcie1_pad_perst" "pcie" 84 |
| "pmic_bus" "pmic" 71, 72 |
| "pwm_ch1_0" "pwm" 51 |
| "pwm_ch1_1" "pwm" 73 |
| "pwm_ch1_2" "pwm" 95 |
| "pwm_ch2_0" "pwm" 52 |
| "pwm_ch2_1" "pwm" 74 |
| "pwm_ch2_2" "pwm" 96 |
| "pwm_ch3_0" "pwm" 53 |
| "pwm_ch3_1" "pwm" 75 |
| "pwm_ch3_2" "pwm" 97 |
| "pwm_ch4_0" "pwm" 54 |
| "pwm_ch4_1" "pwm" 67 |
| "pwm_ch4_2" "pwm" 76 |
| "pwm_ch4_3" "pwm" 98 |
| "pwm_ch5_0" "pwm" 68 |
| "pwm_ch5_1" "pwm" 77 |
| "pwm_ch5_2" "pwm" 99 |
| "pwm_ch6_0" "pwm" 69 |
| "pwm_ch6_1" "pwm" 78 |
| "pwm_ch6_2" "pwm" 81 |
| "pwm_ch6_3" "pwm" 100 |
| "pwm_ch7_0" "pwm" 70 |
| "pwm_ch7_1" "pwm" 82 |
| "pwm_ch7_2" "pwm" 101 |
| "sd_0" "sd" 16, 17, 18, 19, 20, 21 |
| "sd_1" "sd" 25, 26, 27, 28, 29, 30 |
| "spic0_0" "spi" 63, 64, 65, 66 |
| "spic0_1" "spi" 79, 80, 81, 82 |
| "spic1_0" "spi" 67, 68, 69, 70 |
| "spic1_1" "spi" 73, 74, 75, 76 |
| "spic2_0_wp_hold" "spi" 8, 9 |
| "spic2_0" "spi" 10, 11, 12, 13 |
| "tdm_0_out_mclk_bclk_ws" "tdm" 8, 9, 10 |
| "tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13 |
| "tdm_0_out_data" "tdm" 20 |
| "tdm_0_in_data" "tdm" 21 |
| "tdm_1_out_mclk_bclk_ws" "tdm" 57, 58, 59 |
| "tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62 |
| "tdm_1_out_data" "tdm" 55 |
| "tdm_1_in_data" "tdm" 56 |
| "uart0_0_tx_rx" "uart" 6, 7 |
| "uart1_0_tx_rx" "uart" 55, 56 |
| "uart1_0_rts_cts" "uart" 57, 58 |
| "uart1_1_tx_rx" "uart" 73, 74 |
| "uart1_1_rts_cts" "uart" 75, 76 |
| "uart2_0_tx_rx" "uart" 3, 4 |
| "uart2_0_rts_cts" "uart" 1, 2 |
| "uart2_1_tx_rx" "uart" 51, 52 |
| "uart2_1_rts_cts" "uart" 53, 54 |
| "uart2_2_tx_rx" "uart" 59, 60 |
| "uart2_2_rts_cts" "uart" 61, 62 |
| "uart2_3_tx_rx" "uart" 95, 96 |
| "uart3_0_tx_rx" "uart" 57, 58 |
| "uart3_1_tx_rx" "uart" 81, 82 |
| "uart3_1_rts_cts" "uart" 79, 80 |
| "uart4_0_tx_rx" "uart" 61, 62 |
| "uart4_1_tx_rx" "uart" 91, 92 |
| "uart4_1_rts_cts" "uart" 93, 94 |
| "uart4_2_tx_rx" "uart" 97, 98 |
| "uart4_2_rts_cts" "uart" 95, 96 |
| "watchdog" "watchdog" 78 |
| |
| |
| == Valid values for pins, function and groups on MT7629 == |
| |
| Pin #: Valid values for pins |
| ----------------------------- |
| PIN 0: "TOP_5G_CLK" |
| PIN 1: "TOP_5G_DATA" |
| PIN 2: "WF0_5G_HB0" |
| PIN 3: "WF0_5G_HB1" |
| PIN 4: "WF0_5G_HB2" |
| PIN 5: "WF0_5G_HB3" |
| PIN 6: "WF0_5G_HB4" |
| PIN 7: "WF0_5G_HB5" |
| PIN 8: "WF0_5G_HB6" |
| PIN 9: "XO_REQ" |
| PIN 10: "TOP_RST_N" |
| PIN 11: "SYS_WATCHDOG" |
| PIN 12: "EPHY_LED0_N_JTDO" |
| PIN 13: "EPHY_LED1_N_JTDI" |
| PIN 14: "EPHY_LED2_N_JTMS" |
| PIN 15: "EPHY_LED3_N_JTCLK" |
| PIN 16: "EPHY_LED4_N_JTRST_N" |
| PIN 17: "WF2G_LED_N" |
| PIN 18: "WF5G_LED_N" |
| PIN 19: "I2C_SDA" |
| PIN 20: "I2C_SCL" |
| PIN 21: "GPIO_9" |
| PIN 22: "GPIO_10" |
| PIN 23: "GPIO_11" |
| PIN 24: "GPIO_12" |
| PIN 25: "UART1_TXD" |
| PIN 26: "UART1_RXD" |
| PIN 27: "UART1_CTS" |
| PIN 28: "UART1_RTS" |
| PIN 29: "UART2_TXD" |
| PIN 30: "UART2_RXD" |
| PIN 31: "UART2_CTS" |
| PIN 32: "UART2_RTS" |
| PIN 33: "MDI_TP_P1" |
| PIN 34: "MDI_TN_P1" |
| PIN 35: "MDI_RP_P1" |
| PIN 36: "MDI_RN_P1" |
| PIN 37: "MDI_RP_P2" |
| PIN 38: "MDI_RN_P2" |
| PIN 39: "MDI_TP_P2" |
| PIN 40: "MDI_TN_P2" |
| PIN 41: "MDI_TP_P3" |
| PIN 42: "MDI_TN_P3" |
| PIN 43: "MDI_RP_P3" |
| PIN 44: "MDI_RN_P3" |
| PIN 45: "MDI_RP_P4" |
| PIN 46: "MDI_RN_P4" |
| PIN 47: "MDI_TP_P4" |
| PIN 48: "MDI_TN_P4" |
| PIN 49: "SMI_MDC" |
| PIN 50: "SMI_MDIO" |
| PIN 51: "PCIE_PERESET_N" |
| PIN 52: "PWM_0" |
| PIN 53: "GPIO_0" |
| PIN 54: "GPIO_1" |
| PIN 55: "GPIO_2" |
| PIN 56: "GPIO_3" |
| PIN 57: "GPIO_4" |
| PIN 58: "GPIO_5" |
| PIN 59: "GPIO_6" |
| PIN 60: "GPIO_7" |
| PIN 61: "GPIO_8" |
| PIN 62: "SPI_CLK" |
| PIN 63: "SPI_CS" |
| PIN 64: "SPI_MOSI" |
| PIN 65: "SPI_MISO" |
| PIN 66: "SPI_WP" |
| PIN 67: "SPI_HOLD" |
| PIN 68: "UART0_TXD" |
| PIN 69: "UART0_RXD" |
| PIN 70: "TOP_2G_CLK" |
| PIN 71: "TOP_2G_DATA" |
| PIN 72: "WF0_2G_HB0" |
| PIN 73: "WF0_2G_HB1" |
| PIN 74: "WF0_2G_HB2" |
| PIN 75: "WF0_2G_HB3" |
| PIN 76: "WF0_2G_HB4" |
| PIN 77: "WF0_2G_HB5" |
| PIN 78: "WF0_2G_HB6" |
| |
| Valid values for function are: |
| "eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart", |
| "watchdog", "wifi" |
| |
| Valid values for groups are: |
| Valid value function pins (in pin#) |
| ---------------------------------------------------------------- |
| "mdc_mdio" "eth" 23, 24 |
| "i2c_0" "i2c" 19, 20 |
| "i2c_1" "i2c" 53, 54 |
| "ephy_leds" "led" 12, 13, 14, 15, 16, |
| 17, 18 |
| "ephy0_led" "led" 12 |
| "ephy1_led" "led" 13 |
| "ephy2_led" "led" 14 |
| "ephy3_led" "led" 15 |
| "ephy4_led" "led" 16 |
| "wf2g_led" "led" 17 |
| "wf5g_led" "led" 18 |
| "snfi" "flash" 62, 63, 64, 65, 66, 67 |
| "spi_nor" "flash" 62, 63, 64, 65, 66, 67 |
| "pcie_pereset" "pcie" 51 |
| "pcie_wake" "pcie" 55 |
| "pcie_clkreq" "pcie" 56 |
| "pwm_0" "pwm" 52 |
| "pwm_1" "pwm" 61 |
| "spi_0" "spi" 21, 22, 23, 24 |
| "spi_1" "spi" 62, 63, 64, 65 |
| "spi_wp" "spi" 66 |
| "spi_hold" "spi" 67 |
| "uart0_txd_rxd" "uart" 68, 69 |
| "uart1_0_txd_rxd" "uart" 25, 26 |
| "uart1_0_cts_rts" "uart" 27, 28 |
| "uart1_1_txd_rxd" "uart" 53, 54 |
| "uart1_1_cts_rts" "uart" 55, 56 |
| "uart2_0_txd_rxd" "uart" 29, 30 |
| "uart2_0_cts_rts" "uart" 31, 32 |
| "uart2_1_txd_rxd" "uart" 57, 58 |
| "uart2_1_cts_rts" "uart" 59, 60 |
| "watchdog" "watchdog" 11 |
| "wf0_2g" "wifi" 70, 71, 72, 73, 74, |
| 75, 76, 77, 78 |
| "wf0_5g" "wifi" 0, 1, 2, 3, 4, 5, 6, |
| 7, 8, 9, 10 |
| |
| Example: |
| |
| pio: pinctrl@10211000 { |
| compatible = "mediatek,mt7622-pinctrl"; |
| reg = <0 0x10211000 0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| pinctrl_eth_default: eth-default { |
| mux-mdio { |
| groups = "mdc_mdio"; |
| function = "eth"; |
| drive-strength = <12>; |
| }; |
| |
| mux-gmac2 { |
| groups = "gmac2"; |
| function = "eth"; |
| drive-strength = <12>; |
| }; |
| |
| mux-esw { |
| groups = "esw"; |
| function = "eth"; |
| drive-strength = <8>; |
| }; |
| |
| conf-mdio { |
| pins = "MDC"; |
| bias-pull-up; |
| }; |
| }; |
| }; |
