| // SPDX-License-Identifier: (GPL-2.0+) |
| /* |
| * Copyright (C) 2015 DH electronics GmbH |
| * Copyright (C) 2018 Marek Vasut <marex@denx.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx6q-dhcom-som.dtsi" |
| |
| / { |
| model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)"; |
| compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| clk_ext_audio_codec: clock-codec { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| }; |
| |
| display_bl: display-bl { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; |
| brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; |
| default-brightness-level = <8>; |
| enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| lcd_display: disp0 { |
| compatible = "fsl,imx-parallel-display"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interface-pix-fmt = "rgb24"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_lcdif>; |
| status = "okay"; |
| |
| port@0 { |
| reg = <0>; |
| |
| lcd_display_in: endpoint { |
| remote-endpoint = <&ipu1_di0_disp0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| lcd_display_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |
| |
| panel { |
| compatible = "edt,etm0700g0edh6"; |
| ddc-i2c-bus = <&i2c2>; |
| backlight = <&display_bl>; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcd_display_out>; |
| }; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-sgtl5000"; |
| model = "imx-sgtl5000"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&sgtl5000>; |
| audio-routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "LINE_IN", "Line In Jack", |
| "Headphone Jack", "HP_OUT"; |
| mux-int-port = <1>; |
| mux-ext-port = <3>; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux_ext>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| status = "okay"; |
| }; |
| |
| &can2 { |
| status = "disabled"; |
| }; |
| |
| &hdmi { |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| sgtl5000: codec@a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| #sound-dai-cells = <0>; |
| clocks = <&clk_ext_audio_codec>; |
| VDDA-supply = <®_3p3v>; |
| VDDIO-supply = <&sw2_reg>; |
| }; |
| |
| touchscreen@38 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_touchscreen>; |
| compatible = "edt,edt-ft5406"; |
| reg = <0x38>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>; |
| |
| pinctrl_hog: hog-grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0 |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 |
| MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 |
| MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 |
| MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0 |
| MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0 |
| MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0 |
| MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0 |
| MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0 |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0 |
| MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0 |
| MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0 |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0 |
| MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0 |
| MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0 |
| MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0 |
| MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0 |
| MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0 |
| >; |
| }; |
| |
| pinctrl_audmux_ext: audmux-ext-grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| >; |
| }; |
| |
| pinctrl_enet_1G: enet-1G-grp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0 |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1 |
| MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_lcdif: ipu1-lcdif-grp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 |
| MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 |
| MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 |
| MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 |
| MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 |
| MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 |
| MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 |
| MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1-grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_touchscreen: touchscreen-grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pcie: pcie-grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 |
| >; |
| }; |
| }; |
| |
| &ipu1_di0_disp0 { |
| remote-endpoint = <&lcd_display_in>; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &sata { |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| status = "okay"; |
| }; |
