| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * max1619.c - Part of lm_sensors, Linux kernel modules for hardware | 
 |  *             monitoring | 
 |  * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net> | 
 |  *                         Jean Delvare <jdelvare@suse.de> | 
 |  * | 
 |  * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. | 
 |  * It reports up to two temperatures (its own plus up to | 
 |  * one external one). Complete datasheet can be | 
 |  * obtained from Maxim's website at: | 
 |  *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/sysfs.h> | 
 |  | 
 | static const unsigned short normal_i2c[] = { | 
 | 	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; | 
 |  | 
 | /* | 
 |  * The MAX1619 registers | 
 |  */ | 
 |  | 
 | #define MAX1619_REG_R_MAN_ID		0xFE | 
 | #define MAX1619_REG_R_CHIP_ID		0xFF | 
 | #define MAX1619_REG_R_CONFIG		0x03 | 
 | #define MAX1619_REG_W_CONFIG		0x09 | 
 | #define MAX1619_REG_R_CONVRATE		0x04 | 
 | #define MAX1619_REG_W_CONVRATE		0x0A | 
 | #define MAX1619_REG_R_STATUS		0x02 | 
 | #define MAX1619_REG_R_LOCAL_TEMP	0x00 | 
 | #define MAX1619_REG_R_REMOTE_TEMP	0x01 | 
 | #define MAX1619_REG_R_REMOTE_HIGH	0x07 | 
 | #define MAX1619_REG_W_REMOTE_HIGH	0x0D | 
 | #define MAX1619_REG_R_REMOTE_LOW	0x08 | 
 | #define MAX1619_REG_W_REMOTE_LOW	0x0E | 
 | #define MAX1619_REG_R_REMOTE_CRIT	0x10 | 
 | #define MAX1619_REG_W_REMOTE_CRIT	0x12 | 
 | #define MAX1619_REG_R_TCRIT_HYST	0x11 | 
 | #define MAX1619_REG_W_TCRIT_HYST	0x13 | 
 |  | 
 | /* | 
 |  * Conversions | 
 |  */ | 
 |  | 
 | static int temp_from_reg(int val) | 
 | { | 
 | 	return (val & 0x80 ? val-0x100 : val) * 1000; | 
 | } | 
 |  | 
 | static int temp_to_reg(int val) | 
 | { | 
 | 	return (val < 0 ? val+0x100*1000 : val) / 1000; | 
 | } | 
 |  | 
 | enum temp_index { | 
 | 	t_input1 = 0, | 
 | 	t_input2, | 
 | 	t_low2, | 
 | 	t_high2, | 
 | 	t_crit2, | 
 | 	t_hyst2, | 
 | 	t_num_regs | 
 | }; | 
 |  | 
 | /* | 
 |  * Client data (each client gets its own) | 
 |  */ | 
 |  | 
 | struct max1619_data { | 
 | 	struct i2c_client *client; | 
 | 	struct mutex update_lock; | 
 | 	char valid; /* zero until following fields are valid */ | 
 | 	unsigned long last_updated; /* in jiffies */ | 
 |  | 
 | 	/* registers values */ | 
 | 	u8 temp[t_num_regs];	/* index with enum temp_index */ | 
 | 	u8 alarms; | 
 | }; | 
 |  | 
 | static const u8 regs_read[t_num_regs] = { | 
 | 	[t_input1] = MAX1619_REG_R_LOCAL_TEMP, | 
 | 	[t_input2] = MAX1619_REG_R_REMOTE_TEMP, | 
 | 	[t_low2] = MAX1619_REG_R_REMOTE_LOW, | 
 | 	[t_high2] = MAX1619_REG_R_REMOTE_HIGH, | 
 | 	[t_crit2] = MAX1619_REG_R_REMOTE_CRIT, | 
 | 	[t_hyst2] = MAX1619_REG_R_TCRIT_HYST, | 
 | }; | 
 |  | 
 | static const u8 regs_write[t_num_regs] = { | 
 | 	[t_low2] = MAX1619_REG_W_REMOTE_LOW, | 
 | 	[t_high2] = MAX1619_REG_W_REMOTE_HIGH, | 
 | 	[t_crit2] = MAX1619_REG_W_REMOTE_CRIT, | 
 | 	[t_hyst2] = MAX1619_REG_W_TCRIT_HYST, | 
 | }; | 
 |  | 
 | static struct max1619_data *max1619_update_device(struct device *dev) | 
 | { | 
 | 	struct max1619_data *data = dev_get_drvdata(dev); | 
 | 	struct i2c_client *client = data->client; | 
 | 	int config, i; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { | 
 | 		dev_dbg(&client->dev, "Updating max1619 data.\n"); | 
 | 		for (i = 0; i < t_num_regs; i++) | 
 | 			data->temp[i] = i2c_smbus_read_byte_data(client, | 
 | 					regs_read[i]); | 
 | 		data->alarms = i2c_smbus_read_byte_data(client, | 
 | 					MAX1619_REG_R_STATUS); | 
 | 		/* If OVERT polarity is low, reverse alarm bit */ | 
 | 		config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | 
 | 		if (!(config & 0x20)) | 
 | 			data->alarms ^= 0x02; | 
 |  | 
 | 		data->last_updated = jiffies; | 
 | 		data->valid = 1; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return data; | 
 | } | 
 |  | 
 | /* | 
 |  * Sysfs stuff | 
 |  */ | 
 |  | 
 | static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, | 
 | 			 char *buf) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
 | 	struct max1619_data *data = max1619_update_device(dev); | 
 |  | 
 | 	return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index])); | 
 | } | 
 |  | 
 | static ssize_t temp_store(struct device *dev, | 
 | 			  struct device_attribute *devattr, const char *buf, | 
 | 			  size_t count) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
 | 	struct max1619_data *data = dev_get_drvdata(dev); | 
 | 	struct i2c_client *client = data->client; | 
 | 	long val; | 
 | 	int err = kstrtol(buf, 10, &val); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 | 	data->temp[attr->index] = temp_to_reg(val); | 
 | 	i2c_smbus_write_byte_data(client, regs_write[attr->index], | 
 | 				  data->temp[attr->index]); | 
 | 	mutex_unlock(&data->update_lock); | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, | 
 | 			   char *buf) | 
 | { | 
 | 	struct max1619_data *data = max1619_update_device(dev); | 
 | 	return sprintf(buf, "%d\n", data->alarms); | 
 | } | 
 |  | 
 | static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, | 
 | 			  char *buf) | 
 | { | 
 | 	int bitnr = to_sensor_dev_attr(attr)->index; | 
 | 	struct max1619_data *data = max1619_update_device(dev); | 
 | 	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); | 
 | } | 
 |  | 
 | static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, t_input2); | 
 | static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, t_low2); | 
 | static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, t_high2); | 
 | static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, t_crit2); | 
 | static SENSOR_DEVICE_ATTR_RW(temp2_crit_hyst, temp, t_hyst2); | 
 |  | 
 | static DEVICE_ATTR_RO(alarms); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 1); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4); | 
 |  | 
 | static struct attribute *max1619_attrs[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_min.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_max.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_crit.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | 
 |  | 
 | 	&dev_attr_alarms.attr, | 
 | 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_fault.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 | ATTRIBUTE_GROUPS(max1619); | 
 |  | 
 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | static int max1619_detect(struct i2c_client *client, | 
 | 			  struct i2c_board_info *info) | 
 | { | 
 | 	struct i2c_adapter *adapter = client->adapter; | 
 | 	u8 reg_config, reg_convrate, reg_status, man_id, chip_id; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* detection */ | 
 | 	reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | 
 | 	reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE); | 
 | 	reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS); | 
 | 	if ((reg_config & 0x03) != 0x00 | 
 | 	 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) { | 
 | 		dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n", | 
 | 			client->addr); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* identification */ | 
 | 	man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID); | 
 | 	chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID); | 
 | 	if (man_id != 0x4D || chip_id != 0x04) { | 
 | 		dev_info(&adapter->dev, | 
 | 			 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n", | 
 | 			 man_id, chip_id); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	strlcpy(info->type, "max1619", I2C_NAME_SIZE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void max1619_init_client(struct i2c_client *client) | 
 | { | 
 | 	u8 config; | 
 |  | 
 | 	/* | 
 | 	 * Start the conversions. | 
 | 	 */ | 
 | 	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, | 
 | 				  5); /* 2 Hz */ | 
 | 	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | 
 | 	if (config & 0x40) | 
 | 		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, | 
 | 					  config & 0xBF); /* run */ | 
 | } | 
 |  | 
 | static int max1619_probe(struct i2c_client *new_client) | 
 | { | 
 | 	struct max1619_data *data; | 
 | 	struct device *hwmon_dev; | 
 |  | 
 | 	data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data), | 
 | 			    GFP_KERNEL); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	data->client = new_client; | 
 | 	mutex_init(&data->update_lock); | 
 |  | 
 | 	/* Initialize the MAX1619 chip */ | 
 | 	max1619_init_client(new_client); | 
 |  | 
 | 	hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev, | 
 | 							   new_client->name, | 
 | 							   data, | 
 | 							   max1619_groups); | 
 | 	return PTR_ERR_OR_ZERO(hwmon_dev); | 
 | } | 
 |  | 
 | static const struct i2c_device_id max1619_id[] = { | 
 | 	{ "max1619", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, max1619_id); | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id max1619_of_match[] = { | 
 | 	{ .compatible = "maxim,max1619", }, | 
 | 	{}, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(of, max1619_of_match); | 
 | #endif | 
 |  | 
 | static struct i2c_driver max1619_driver = { | 
 | 	.class		= I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name	= "max1619", | 
 | 		.of_match_table = of_match_ptr(max1619_of_match), | 
 | 	}, | 
 | 	.probe_new	= max1619_probe, | 
 | 	.id_table	= max1619_id, | 
 | 	.detect		= max1619_detect, | 
 | 	.address_list	= normal_i2c, | 
 | }; | 
 |  | 
 | module_i2c_driver(max1619_driver); | 
 |  | 
 | MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>"); | 
 | MODULE_DESCRIPTION("MAX1619 sensor driver"); | 
 | MODULE_LICENSE("GPL"); |