|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * Setup platform devices needed by the Freescale multi-port host | 
|  | * and/or dual-role USB controller modules based on the description | 
|  | * in flat device tree. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/fsl_devices.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/dma-mapping.h> | 
|  |  | 
|  | struct fsl_usb2_dev_data { | 
|  | char *dr_mode;		/* controller mode */ | 
|  | char *drivers[3];	/* drivers to instantiate for this mode */ | 
|  | enum fsl_usb2_operating_modes op_mode;	/* operating mode */ | 
|  | }; | 
|  |  | 
|  | static struct fsl_usb2_dev_data dr_mode_data[] = { | 
|  | { | 
|  | .dr_mode = "host", | 
|  | .drivers = { "fsl-ehci", NULL, NULL, }, | 
|  | .op_mode = FSL_USB2_DR_HOST, | 
|  | }, | 
|  | { | 
|  | .dr_mode = "otg", | 
|  | .drivers = { "fsl-usb2-otg", "fsl-ehci", "fsl-usb2-udc", }, | 
|  | .op_mode = FSL_USB2_DR_OTG, | 
|  | }, | 
|  | { | 
|  | .dr_mode = "peripheral", | 
|  | .drivers = { "fsl-usb2-udc", NULL, NULL, }, | 
|  | .op_mode = FSL_USB2_DR_DEVICE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np) | 
|  | { | 
|  | const unsigned char *prop; | 
|  | int i; | 
|  |  | 
|  | prop = of_get_property(np, "dr_mode", NULL); | 
|  | if (prop) { | 
|  | for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) { | 
|  | if (!strcmp(prop, dr_mode_data[i].dr_mode)) | 
|  | return &dr_mode_data[i]; | 
|  | } | 
|  | } | 
|  | pr_warn("%pOF: Invalid 'dr_mode' property, fallback to host mode\n", | 
|  | np); | 
|  | return &dr_mode_data[0]; /* mode not specified, use host */ | 
|  | } | 
|  |  | 
|  | static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) | 
|  | { | 
|  | if (!phy_type) | 
|  | return FSL_USB2_PHY_NONE; | 
|  | if (!strcasecmp(phy_type, "ulpi")) | 
|  | return FSL_USB2_PHY_ULPI; | 
|  | if (!strcasecmp(phy_type, "utmi")) | 
|  | return FSL_USB2_PHY_UTMI; | 
|  | if (!strcasecmp(phy_type, "utmi_wide")) | 
|  | return FSL_USB2_PHY_UTMI_WIDE; | 
|  | if (!strcasecmp(phy_type, "utmi_dual")) | 
|  | return FSL_USB2_PHY_UTMI_DUAL; | 
|  | if (!strcasecmp(phy_type, "serial")) | 
|  | return FSL_USB2_PHY_SERIAL; | 
|  |  | 
|  | return FSL_USB2_PHY_NONE; | 
|  | } | 
|  |  | 
|  | static struct platform_device *fsl_usb2_device_register( | 
|  | struct platform_device *ofdev, | 
|  | struct fsl_usb2_platform_data *pdata, | 
|  | const char *name, int id) | 
|  | { | 
|  | struct platform_device *pdev; | 
|  | const struct resource *res = ofdev->resource; | 
|  | unsigned int num = ofdev->num_resources; | 
|  | int retval; | 
|  |  | 
|  | pdev = platform_device_alloc(name, id); | 
|  | if (!pdev) { | 
|  | retval = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | pdev->dev.parent = &ofdev->dev; | 
|  |  | 
|  | pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask; | 
|  |  | 
|  | if (!pdev->dev.dma_mask) { | 
|  | pdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask; | 
|  | } else { | 
|  | retval = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); | 
|  | if (retval) | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | retval = platform_device_add_data(pdev, pdata, sizeof(*pdata)); | 
|  | if (retval) | 
|  | goto error; | 
|  |  | 
|  | if (num) { | 
|  | retval = platform_device_add_resources(pdev, res, num); | 
|  | if (retval) | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | retval = platform_device_add(pdev); | 
|  | if (retval) | 
|  | goto error; | 
|  |  | 
|  | return pdev; | 
|  |  | 
|  | error: | 
|  | platform_device_put(pdev); | 
|  | return ERR_PTR(retval); | 
|  | } | 
|  |  | 
|  | static const struct of_device_id fsl_usb2_mph_dr_of_match[]; | 
|  |  | 
|  | static enum fsl_usb2_controller_ver usb_get_ver_info(struct device_node *np) | 
|  | { | 
|  | enum fsl_usb2_controller_ver ver = FSL_USB_VER_NONE; | 
|  |  | 
|  | /* | 
|  | * returns 1 for usb controller version 1.6 | 
|  | * returns 2 for usb controller version 2.2 | 
|  | * returns 3 for usb controller version 2.4 | 
|  | * returns 4 for usb controller version 2.5 | 
|  | * returns 0 otherwise | 
|  | */ | 
|  | if (of_device_is_compatible(np, "fsl-usb2-dr")) { | 
|  | if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6")) | 
|  | ver = FSL_USB_VER_1_6; | 
|  | else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) | 
|  | ver = FSL_USB_VER_2_2; | 
|  | else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.4")) | 
|  | ver = FSL_USB_VER_2_4; | 
|  | else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.5")) | 
|  | ver = FSL_USB_VER_2_5; | 
|  | else /* for previous controller versions */ | 
|  | ver = FSL_USB_VER_OLD; | 
|  |  | 
|  | if (ver > FSL_USB_VER_NONE) | 
|  | return ver; | 
|  | } | 
|  |  | 
|  | if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr")) | 
|  | return FSL_USB_VER_OLD; | 
|  |  | 
|  | if (of_device_is_compatible(np, "fsl-usb2-mph")) { | 
|  | if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) | 
|  | ver = FSL_USB_VER_1_6; | 
|  | else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2")) | 
|  | ver = FSL_USB_VER_2_2; | 
|  | else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.4")) | 
|  | ver = FSL_USB_VER_2_4; | 
|  | else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.5")) | 
|  | ver = FSL_USB_VER_2_5; | 
|  | else /* for previous controller versions */ | 
|  | ver = FSL_USB_VER_OLD; | 
|  | } | 
|  |  | 
|  | return ver; | 
|  | } | 
|  |  | 
|  | static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) | 
|  | { | 
|  | struct device_node *np = ofdev->dev.of_node; | 
|  | struct platform_device *usb_dev; | 
|  | struct fsl_usb2_platform_data data, *pdata; | 
|  | struct fsl_usb2_dev_data *dev_data; | 
|  | const struct of_device_id *match; | 
|  | const unsigned char *prop; | 
|  | static unsigned int idx; | 
|  | int i; | 
|  |  | 
|  | if (!of_device_is_available(np)) | 
|  | return -ENODEV; | 
|  |  | 
|  | match = of_match_device(fsl_usb2_mph_dr_of_match, &ofdev->dev); | 
|  | if (!match) | 
|  | return -ENODEV; | 
|  |  | 
|  | pdata = &data; | 
|  | if (match->data) | 
|  | memcpy(pdata, match->data, sizeof(data)); | 
|  | else | 
|  | memset(pdata, 0, sizeof(data)); | 
|  |  | 
|  | dev_data = get_dr_mode_data(np); | 
|  |  | 
|  | if (of_device_is_compatible(np, "fsl-usb2-mph")) { | 
|  | if (of_get_property(np, "port0", NULL)) | 
|  | pdata->port_enables |= FSL_USB2_PORT0_ENABLED; | 
|  |  | 
|  | if (of_get_property(np, "port1", NULL)) | 
|  | pdata->port_enables |= FSL_USB2_PORT1_ENABLED; | 
|  |  | 
|  | pdata->operating_mode = FSL_USB2_MPH_HOST; | 
|  | } else { | 
|  | if (of_get_property(np, "fsl,invert-drvvbus", NULL)) | 
|  | pdata->invert_drvvbus = 1; | 
|  |  | 
|  | if (of_get_property(np, "fsl,invert-pwr-fault", NULL)) | 
|  | pdata->invert_pwr_fault = 1; | 
|  |  | 
|  | /* setup mode selected in the device tree */ | 
|  | pdata->operating_mode = dev_data->op_mode; | 
|  | } | 
|  |  | 
|  | prop = of_get_property(np, "phy_type", NULL); | 
|  | pdata->phy_mode = determine_usb_phy(prop); | 
|  | pdata->controller_ver = usb_get_ver_info(np); | 
|  |  | 
|  | /* Activate Erratum by reading property in device tree */ | 
|  | pdata->has_fsl_erratum_a007792 = | 
|  | of_property_read_bool(np, "fsl,usb-erratum-a007792"); | 
|  | pdata->has_fsl_erratum_a005275 = | 
|  | of_property_read_bool(np, "fsl,usb-erratum-a005275"); | 
|  | pdata->has_fsl_erratum_a005697 = | 
|  | of_property_read_bool(np, "fsl,usb_erratum-a005697"); | 
|  | pdata->has_fsl_erratum_a006918 = | 
|  | of_property_read_bool(np, "fsl,usb_erratum-a006918"); | 
|  | pdata->has_fsl_erratum_14 = | 
|  | of_property_read_bool(np, "fsl,usb_erratum-14"); | 
|  |  | 
|  | /* | 
|  | * Determine whether phy_clk_valid needs to be checked | 
|  | * by reading property in device tree | 
|  | */ | 
|  | pdata->check_phy_clk_valid = | 
|  | of_property_read_bool(np, "phy-clk-valid"); | 
|  |  | 
|  | if (pdata->have_sysif_regs) { | 
|  | if (pdata->controller_ver == FSL_USB_VER_NONE) { | 
|  | dev_warn(&ofdev->dev, "Could not get controller version\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) { | 
|  | if (!dev_data->drivers[i]) | 
|  | continue; | 
|  | usb_dev = fsl_usb2_device_register(ofdev, pdata, | 
|  | dev_data->drivers[i], idx); | 
|  | if (IS_ERR(usb_dev)) { | 
|  | dev_err(&ofdev->dev, "Can't register usb device\n"); | 
|  | return PTR_ERR(usb_dev); | 
|  | } | 
|  | } | 
|  | idx++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __unregister_subdev(struct device *dev, void *d) | 
|  | { | 
|  | platform_device_unregister(to_platform_device(dev)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev) | 
|  | { | 
|  | device_for_each_child(&ofdev->dev, NULL, __unregister_subdev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_MPC512x | 
|  |  | 
|  | #define USBGENCTRL		0x200		/* NOTE: big endian */ | 
|  | #define GC_WU_INT_CLR		(1 << 5)	/* Wakeup int clear */ | 
|  | #define GC_ULPI_SEL		(1 << 4)	/* ULPI i/f select (usb0 only)*/ | 
|  | #define GC_PPP			(1 << 3)	/* Inv. Port Power Polarity */ | 
|  | #define GC_PFP			(1 << 2)	/* Inv. Power Fault Polarity */ | 
|  | #define GC_WU_ULPI_EN		(1 << 1)	/* Wakeup on ULPI event */ | 
|  | #define GC_WU_IE		(1 << 1)	/* Wakeup interrupt enable */ | 
|  |  | 
|  | #define ISIPHYCTRL		0x204		/* NOTE: big endian */ | 
|  | #define PHYCTRL_PHYE		(1 << 4)	/* On-chip UTMI PHY enable */ | 
|  | #define PHYCTRL_BSENH		(1 << 3)	/* Bit Stuff Enable High */ | 
|  | #define PHYCTRL_BSEN		(1 << 2)	/* Bit Stuff Enable */ | 
|  | #define PHYCTRL_LSFE		(1 << 1)	/* Line State Filter Enable */ | 
|  | #define PHYCTRL_PXE		(1 << 0)	/* PHY oscillator enable */ | 
|  |  | 
|  | int fsl_usb2_mpc5121_init(struct platform_device *pdev) | 
|  | { | 
|  | struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); | 
|  | struct clk *clk; | 
|  | int err; | 
|  |  | 
|  | clk = devm_clk_get(pdev->dev.parent, "ipg"); | 
|  | if (IS_ERR(clk)) { | 
|  | dev_err(&pdev->dev, "failed to get clk\n"); | 
|  | return PTR_ERR(clk); | 
|  | } | 
|  | err = clk_prepare_enable(clk); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "failed to enable clk\n"); | 
|  | return err; | 
|  | } | 
|  | pdata->clk = clk; | 
|  |  | 
|  | if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) { | 
|  | u32 reg = 0; | 
|  |  | 
|  | if (pdata->invert_drvvbus) | 
|  | reg |= GC_PPP; | 
|  |  | 
|  | if (pdata->invert_pwr_fault) | 
|  | reg |= GC_PFP; | 
|  |  | 
|  | out_be32(pdata->regs + ISIPHYCTRL, PHYCTRL_PHYE | PHYCTRL_PXE); | 
|  | out_be32(pdata->regs + USBGENCTRL, reg); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void fsl_usb2_mpc5121_exit(struct platform_device *pdev) | 
|  | { | 
|  | struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); | 
|  |  | 
|  | pdata->regs = NULL; | 
|  |  | 
|  | if (pdata->clk) | 
|  | clk_disable_unprepare(pdata->clk); | 
|  | } | 
|  |  | 
|  | static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { | 
|  | .big_endian_desc = 1, | 
|  | .big_endian_mmio = 1, | 
|  | .es = 1, | 
|  | .have_sysif_regs = 0, | 
|  | .le_setup_buf = 1, | 
|  | .init = fsl_usb2_mpc5121_init, | 
|  | .exit = fsl_usb2_mpc5121_exit, | 
|  | }; | 
|  | #endif /* CONFIG_PPC_MPC512x */ | 
|  |  | 
|  | static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = { | 
|  | .have_sysif_regs = 1, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id fsl_usb2_mph_dr_of_match[] = { | 
|  | { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, }, | 
|  | { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, }, | 
|  | #ifdef CONFIG_PPC_MPC512x | 
|  | { .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, }, | 
|  | #endif | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, fsl_usb2_mph_dr_of_match); | 
|  |  | 
|  | static struct platform_driver fsl_usb2_mph_dr_driver = { | 
|  | .driver = { | 
|  | .name = "fsl-usb2-mph-dr", | 
|  | .of_match_table = fsl_usb2_mph_dr_of_match, | 
|  | }, | 
|  | .probe	= fsl_usb2_mph_dr_of_probe, | 
|  | .remove	= fsl_usb2_mph_dr_of_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(fsl_usb2_mph_dr_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("FSL MPH DR OF devices driver"); | 
|  | MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); | 
|  | MODULE_LICENSE("GPL"); |