| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Marvell PXA25x family clocks |
| * |
| * Copyright (C) 2014 Robert Jarzmik |
| * |
| * Heavily inspired from former arch/arm/mach-pxa/pxa25x.c. |
| * |
| * For non-devicetree platforms. Once pxa is fully converted to devicetree, this |
| * should go away. |
| */ |
| #include <linux/clk-provider.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/soc/pxa/smemc.h> |
| |
| #include <dt-bindings/clock/pxa-clock.h> |
| #include "clk-pxa.h" |
| #include "clk-pxa2xx.h" |
| |
| #define KHz 1000 |
| #define MHz (1000 * 1000) |
| |
| enum { |
| PXA_CORE_RUN = 0, |
| PXA_CORE_TURBO, |
| }; |
| |
| #define PXA25x_CLKCFG(T) \ |
| (CLKCFG_FCS | \ |
| ((T) ? CLKCFG_TURBO : 0)) |
| #define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L) |
| |
| /* Define the refresh period in mSec for the SDRAM and the number of rows */ |
| #define SDRAM_TREF 64 /* standard 64ms SDRAM */ |
| |
| /* |
| * Various clock factors driven by the CCCR register. |
| */ |
| static void __iomem *clk_regs; |
| |
| /* Crystal Frequency to Memory Frequency Multiplier (L) */ |
| static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, }; |
| |
| /* Memory Frequency to Run Mode Frequency Multiplier (M) */ |
| static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 }; |
| |
| /* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */ |
| /* Note: we store the value N * 2 here. */ |
| static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 }; |
| |
| static const char * const get_freq_khz[] = { |
| "core", "run", "cpll", "memory" |
| }; |
| |
| static u32 mdrefr_dri(unsigned int freq_khz) |
| { |
| u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows(); |
| |
| return interval / 32; |
| } |
| |
| /* |
| * Get the clock frequency as reflected by CCCR and the turbo flag. |
| * We assume these values have been applied via a fcs. |
| * If info is not 0 we also display the current settings. |
| */ |
| unsigned int pxa25x_get_clk_frequency_khz(int info) |
| { |
| struct clk *clk; |
| unsigned long clks[5]; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(get_freq_khz); i++) { |
| clk = clk_get(NULL, get_freq_khz[i]); |
| if (IS_ERR(clk)) { |
| clks[i] = 0; |
| } else { |
| clks[i] = clk_get_rate(clk); |
| clk_put(clk); |
| } |
| } |
| |
| if (info) { |
| pr_info("Run Mode clock: %ld.%02ldMHz\n", |
| clks[1] / 1000000, (clks[1] % 1000000) / 10000); |
| pr_info("Turbo Mode clock: %ld.%02ldMHz\n", |
| clks[2] / 1000000, (clks[2] % 1000000) / 10000); |
| pr_info("Memory clock: %ld.%02ldMHz\n", |
| clks[3] / 1000000, (clks[3] % 1000000) / 10000); |
| } |
| |
| return (unsigned int)clks[0] / KHz; |
| } |
| |
| static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| unsigned long cccr = readl(clk_regs + CCCR); |
| unsigned int m = M_clk_mult[(cccr >> 5) & 0x03]; |
| |
| return parent_rate / m; |
| } |
| PARENTS(clk_pxa25x_memory) = { "run" }; |
| RATE_RO_OPS(clk_pxa25x_memory, "memory"); |
| |
| PARENTS(pxa25x_pbus95) = { "ppll_95_85mhz", "ppll_95_85mhz" }; |
| PARENTS(pxa25x_pbus147) = { "ppll_147_46mhz", "ppll_147_46mhz" }; |
| PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" }; |
| |
| #define PXA25X_CKEN(dev_id, con_id, parents, mult, div, \ |
| bit, is_lp, flags) \ |
| PXA_CKEN(dev_id, con_id, bit, parents, mult, div, mult, div, \ |
| is_lp, CKEN, CKEN_ ## bit, flags) |
| #define PXA25X_PBUS95_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ |
| PXA25X_CKEN(dev_id, con_id, pxa25x_pbus95_parents, mult_hp, \ |
| div_hp, bit, NULL, 0) |
| #define PXA25X_PBUS147_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)\ |
| PXA25X_CKEN(dev_id, con_id, pxa25x_pbus147_parents, mult_hp, \ |
| div_hp, bit, NULL, 0) |
| #define PXA25X_OSC3_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ |
| PXA25X_CKEN(dev_id, con_id, pxa25x_osc3_parents, mult_hp, \ |
| div_hp, bit, NULL, 0) |
| |
| #define PXA25X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \ |
| PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ |
| CKEN, CKEN_ ## bit, 0) |
| #define PXA25X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \ |
| PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ |
| CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED) |
| |
| static struct desc_clk_cken pxa25x_clocks[] __initdata = { |
| PXA25X_PBUS95_CKEN("pxa2xx-mci.0", NULL, MMC, 1, 5, 0), |
| PXA25X_PBUS95_CKEN("pxa2xx-i2c.0", NULL, I2C, 1, 3, 0), |
| PXA25X_PBUS95_CKEN("pxa2xx-ir", "FICPCLK", FICP, 1, 2, 0), |
| PXA25X_PBUS95_CKEN("pxa25x-udc", NULL, USB, 1, 2, 5), |
| PXA25X_PBUS147_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 10, 1), |
| PXA25X_PBUS147_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 10, 1), |
| PXA25X_PBUS147_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 10, 1), |
| PXA25X_PBUS147_CKEN("pxa2xx-uart.3", NULL, HWUART, 1, 10, 1), |
| PXA25X_PBUS147_CKEN("pxa2xx-i2s", NULL, I2S, 1, 10, 0), |
| PXA25X_PBUS147_CKEN(NULL, "AC97CLK", AC97, 1, 12, 0), |
| PXA25X_OSC3_CKEN("pxa25x-ssp.0", NULL, SSP, 1, 1, 0), |
| PXA25X_OSC3_CKEN("pxa25x-nssp.1", NULL, NSSP, 1, 1, 0), |
| PXA25X_OSC3_CKEN("pxa25x-nssp.2", NULL, ASSP, 1, 1, 0), |
| PXA25X_OSC3_CKEN("pxa25x-pwm.0", NULL, PWM0, 1, 1, 0), |
| PXA25X_OSC3_CKEN("pxa25x-pwm.1", NULL, PWM1, 1, 1, 0), |
| |
| PXA25X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, clk_pxa25x_memory_parents, 0), |
| PXA25X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC, |
| clk_pxa25x_memory_parents, 0), |
| }; |
| |
| /* |
| * In this table, PXA25x_CCCR(N2, M, L) has the following meaning, where : |
| * - freq_cpll = n * m * L * 3.6864 MHz |
| * - n = N2 / 2 |
| * - m = 2^(M - 1), where 1 <= M <= 3 |
| * - l = L_clk_mult[L], ie. { 0, 27, 32, 36, 40, 45, 0, }[L] |
| */ |
| static struct pxa2xx_freq pxa25x_freqs[] = { |
| /* CPU MEMBUS CCCR DIV2 CCLKCFG */ |
| { 99532800, 99500, PXA25x_CCCR(2, 1, 1), 1, PXA25x_CLKCFG(1)}, |
| {199065600, 99500, PXA25x_CCCR(4, 1, 1), 0, PXA25x_CLKCFG(1)}, |
| {298598400, 99500, PXA25x_CCCR(3, 2, 1), 0, PXA25x_CLKCFG(1)}, |
| {398131200, 99500, PXA25x_CCCR(4, 2, 1), 0, PXA25x_CLKCFG(1)}, |
| }; |
| |
| static u8 clk_pxa25x_core_get_parent(struct clk_hw *hw) |
| { |
| unsigned long clkcfg; |
| unsigned int t; |
| |
| asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); |
| t = clkcfg & (1 << 0); |
| if (t) |
| return PXA_CORE_TURBO; |
| return PXA_CORE_RUN; |
| } |
| |
| static int clk_pxa25x_core_set_parent(struct clk_hw *hw, u8 index) |
| { |
| if (index > PXA_CORE_TURBO) |
| return -EINVAL; |
| |
| pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO); |
| |
| return 0; |
| } |
| |
| static int clk_pxa25x_core_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| return __clk_mux_determine_rate(hw, req); |
| } |
| |
| PARENTS(clk_pxa25x_core) = { "run", "cpll" }; |
| MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT); |
| |
| static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| unsigned long cccr = readl(clk_regs + CCCR); |
| unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07]; |
| |
| return (parent_rate / n2) * 2; |
| } |
| PARENTS(clk_pxa25x_run) = { "cpll" }; |
| RATE_RO_OPS(clk_pxa25x_run, "run"); |
| |
| static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| unsigned long clkcfg, cccr = readl(clk_regs + CCCR); |
| unsigned int l, m, n2, t; |
| |
| asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); |
| t = clkcfg & (1 << 0); |
| l = L_clk_mult[(cccr >> 0) & 0x1f]; |
| m = M_clk_mult[(cccr >> 5) & 0x03]; |
| n2 = N2_clk_mult[(cccr >> 7) & 0x07]; |
| |
| return m * l * n2 * parent_rate / 2; |
| } |
| |
| static int clk_pxa25x_cpll_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| return pxa2xx_determine_rate(req, pxa25x_freqs, |
| ARRAY_SIZE(pxa25x_freqs)); |
| } |
| |
| static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| int i; |
| |
| pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate); |
| for (i = 0; i < ARRAY_SIZE(pxa25x_freqs); i++) |
| if (pxa25x_freqs[i].cpll == rate) |
| break; |
| |
| if (i >= ARRAY_SIZE(pxa25x_freqs)) |
| return -EINVAL; |
| |
| pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, clk_regs + CCCR); |
| |
| return 0; |
| } |
| PARENTS(clk_pxa25x_cpll) = { "osc_3_6864mhz" }; |
| RATE_OPS(clk_pxa25x_cpll, "cpll"); |
| |
| static void __init pxa25x_register_core(void) |
| { |
| clkdev_pxa_register(CLK_NONE, "cpll", NULL, |
| clk_register_clk_pxa25x_cpll()); |
| clkdev_pxa_register(CLK_NONE, "run", NULL, |
| clk_register_clk_pxa25x_run()); |
| clkdev_pxa_register(CLK_CORE, "core", NULL, |
| clk_register_clk_pxa25x_core()); |
| } |
| |
| static void __init pxa25x_register_plls(void) |
| { |
| clk_register_fixed_rate(NULL, "osc_3_6864mhz", NULL, |
| CLK_GET_RATE_NOCACHE, 3686400); |
| clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL, |
| clk_register_fixed_rate(NULL, "osc_32_768khz", NULL, |
| CLK_GET_RATE_NOCACHE, |
| 32768)); |
| clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0); |
| clk_register_fixed_factor(NULL, "ppll_95_85mhz", "osc_3_6864mhz", |
| 0, 26, 1); |
| clk_register_fixed_factor(NULL, "ppll_147_46mhz", "osc_3_6864mhz", |
| 0, 40, 1); |
| } |
| |
| static void __init pxa25x_base_clocks_init(void) |
| { |
| pxa25x_register_plls(); |
| pxa25x_register_core(); |
| clkdev_pxa_register(CLK_NONE, "system_bus", NULL, |
| clk_register_clk_pxa25x_memory()); |
| } |
| |
| #define DUMMY_CLK(_con_id, _dev_id, _parent) \ |
| { .con_id = _con_id, .dev_id = _dev_id, .parent = _parent } |
| struct dummy_clk { |
| const char *con_id; |
| const char *dev_id; |
| const char *parent; |
| }; |
| static struct dummy_clk dummy_clks[] __initdata = { |
| DUMMY_CLK(NULL, "pxa25x-gpio", "osc_32_768khz"), |
| DUMMY_CLK(NULL, "pxa26x-gpio", "osc_32_768khz"), |
| DUMMY_CLK("GPIO11_CLK", NULL, "osc_3_6864mhz"), |
| DUMMY_CLK("GPIO12_CLK", NULL, "osc_32_768khz"), |
| DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"), |
| DUMMY_CLK("OSTIMER0", NULL, "osc_3_6864mhz"), |
| DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"), |
| }; |
| |
| static void __init pxa25x_dummy_clocks_init(void) |
| { |
| struct clk *clk; |
| struct dummy_clk *d; |
| const char *name; |
| int i; |
| |
| /* |
| * All pinctrl logic has been wiped out of the clock driver, especially |
| * for gpio11 and gpio12 outputs. Machine code should ensure proper pin |
| * control (ie. pxa2xx_mfp_config() invocation). |
| */ |
| for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) { |
| d = &dummy_clks[i]; |
| name = d->dev_id ? d->dev_id : d->con_id; |
| clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1); |
| clk_register_clkdev(clk, d->con_id, d->dev_id); |
| } |
| } |
| |
| int __init pxa25x_clocks_init(void __iomem *regs) |
| { |
| clk_regs = regs; |
| pxa25x_base_clocks_init(); |
| pxa25x_dummy_clocks_init(); |
| return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks), clk_regs); |
| } |
| |
| static void __init pxa25x_dt_clocks_init(struct device_node *np) |
| { |
| pxa25x_clocks_init(ioremap(0x41300000ul, 0x10)); |
| clk_pxa_dt_common_init(np); |
| } |
| CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks", |
| pxa25x_dt_clocks_init); |