| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Generic serial GNSS receiver driver |
| * |
| * Copyright (C) 2018 Johan Hovold <johan@kernel.org> |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/gnss.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sched.h> |
| #include <linux/serdev.h> |
| #include <linux/slab.h> |
| |
| #include "serial.h" |
| |
| static int gnss_serial_open(struct gnss_device *gdev) |
| { |
| struct gnss_serial *gserial = gnss_get_drvdata(gdev); |
| struct serdev_device *serdev = gserial->serdev; |
| int ret; |
| |
| ret = serdev_device_open(serdev); |
| if (ret) |
| return ret; |
| |
| serdev_device_set_baudrate(serdev, gserial->speed); |
| serdev_device_set_flow_control(serdev, false); |
| |
| ret = pm_runtime_get_sync(&serdev->dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(&serdev->dev); |
| goto err_close; |
| } |
| |
| return 0; |
| |
| err_close: |
| serdev_device_close(serdev); |
| |
| return ret; |
| } |
| |
| static void gnss_serial_close(struct gnss_device *gdev) |
| { |
| struct gnss_serial *gserial = gnss_get_drvdata(gdev); |
| struct serdev_device *serdev = gserial->serdev; |
| |
| serdev_device_close(serdev); |
| |
| pm_runtime_put(&serdev->dev); |
| } |
| |
| static int gnss_serial_write_raw(struct gnss_device *gdev, |
| const unsigned char *buf, size_t count) |
| { |
| struct gnss_serial *gserial = gnss_get_drvdata(gdev); |
| struct serdev_device *serdev = gserial->serdev; |
| int ret; |
| |
| /* write is only buffered synchronously */ |
| ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT); |
| if (ret < 0 || ret < count) |
| return ret; |
| |
| /* FIXME: determine if interrupted? */ |
| serdev_device_wait_until_sent(serdev, 0); |
| |
| return count; |
| } |
| |
| static const struct gnss_operations gnss_serial_gnss_ops = { |
| .open = gnss_serial_open, |
| .close = gnss_serial_close, |
| .write_raw = gnss_serial_write_raw, |
| }; |
| |
| static int gnss_serial_receive_buf(struct serdev_device *serdev, |
| const unsigned char *buf, size_t count) |
| { |
| struct gnss_serial *gserial = serdev_device_get_drvdata(serdev); |
| struct gnss_device *gdev = gserial->gdev; |
| |
| return gnss_insert_raw(gdev, buf, count); |
| } |
| |
| static const struct serdev_device_ops gnss_serial_serdev_ops = { |
| .receive_buf = gnss_serial_receive_buf, |
| .write_wakeup = serdev_device_write_wakeup, |
| }; |
| |
| static int gnss_serial_set_power(struct gnss_serial *gserial, |
| enum gnss_serial_pm_state state) |
| { |
| if (!gserial->ops || !gserial->ops->set_power) |
| return 0; |
| |
| return gserial->ops->set_power(gserial, state); |
| } |
| |
| /* |
| * FIXME: need to provide subdriver defaults or separate dt parsing from |
| * allocation. |
| */ |
| static int gnss_serial_parse_dt(struct serdev_device *serdev) |
| { |
| struct gnss_serial *gserial = serdev_device_get_drvdata(serdev); |
| struct device_node *node = serdev->dev.of_node; |
| u32 speed = 4800; |
| |
| of_property_read_u32(node, "current-speed", &speed); |
| |
| gserial->speed = speed; |
| |
| return 0; |
| } |
| |
| struct gnss_serial *gnss_serial_allocate(struct serdev_device *serdev, |
| size_t data_size) |
| { |
| struct gnss_serial *gserial; |
| struct gnss_device *gdev; |
| int ret; |
| |
| gserial = kzalloc(sizeof(*gserial) + data_size, GFP_KERNEL); |
| if (!gserial) |
| return ERR_PTR(-ENOMEM); |
| |
| gdev = gnss_allocate_device(&serdev->dev); |
| if (!gdev) { |
| ret = -ENOMEM; |
| goto err_free_gserial; |
| } |
| |
| gdev->ops = &gnss_serial_gnss_ops; |
| gnss_set_drvdata(gdev, gserial); |
| |
| gserial->serdev = serdev; |
| gserial->gdev = gdev; |
| |
| serdev_device_set_drvdata(serdev, gserial); |
| serdev_device_set_client_ops(serdev, &gnss_serial_serdev_ops); |
| |
| ret = gnss_serial_parse_dt(serdev); |
| if (ret) |
| goto err_put_device; |
| |
| return gserial; |
| |
| err_put_device: |
| gnss_put_device(gserial->gdev); |
| err_free_gserial: |
| kfree(gserial); |
| |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(gnss_serial_allocate); |
| |
| void gnss_serial_free(struct gnss_serial *gserial) |
| { |
| gnss_put_device(gserial->gdev); |
| kfree(gserial); |
| } |
| EXPORT_SYMBOL_GPL(gnss_serial_free); |
| |
| int gnss_serial_register(struct gnss_serial *gserial) |
| { |
| struct serdev_device *serdev = gserial->serdev; |
| int ret; |
| |
| if (IS_ENABLED(CONFIG_PM)) { |
| pm_runtime_enable(&serdev->dev); |
| } else { |
| ret = gnss_serial_set_power(gserial, GNSS_SERIAL_ACTIVE); |
| if (ret < 0) |
| return ret; |
| } |
| |
| ret = gnss_register_device(gserial->gdev); |
| if (ret) |
| goto err_disable_rpm; |
| |
| return 0; |
| |
| err_disable_rpm: |
| if (IS_ENABLED(CONFIG_PM)) |
| pm_runtime_disable(&serdev->dev); |
| else |
| gnss_serial_set_power(gserial, GNSS_SERIAL_OFF); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(gnss_serial_register); |
| |
| void gnss_serial_deregister(struct gnss_serial *gserial) |
| { |
| struct serdev_device *serdev = gserial->serdev; |
| |
| gnss_deregister_device(gserial->gdev); |
| |
| if (IS_ENABLED(CONFIG_PM)) |
| pm_runtime_disable(&serdev->dev); |
| else |
| gnss_serial_set_power(gserial, GNSS_SERIAL_OFF); |
| } |
| EXPORT_SYMBOL_GPL(gnss_serial_deregister); |
| |
| #ifdef CONFIG_PM |
| static int gnss_serial_runtime_suspend(struct device *dev) |
| { |
| struct gnss_serial *gserial = dev_get_drvdata(dev); |
| |
| return gnss_serial_set_power(gserial, GNSS_SERIAL_STANDBY); |
| } |
| |
| static int gnss_serial_runtime_resume(struct device *dev) |
| { |
| struct gnss_serial *gserial = dev_get_drvdata(dev); |
| |
| return gnss_serial_set_power(gserial, GNSS_SERIAL_ACTIVE); |
| } |
| #endif /* CONFIG_PM */ |
| |
| static int gnss_serial_prepare(struct device *dev) |
| { |
| if (pm_runtime_suspended(dev)) |
| return 1; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int gnss_serial_suspend(struct device *dev) |
| { |
| struct gnss_serial *gserial = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| /* |
| * FIXME: serdev currently lacks support for managing the underlying |
| * device's wakeup settings. A workaround would be to close the serdev |
| * device here if it is open. |
| */ |
| |
| if (!pm_runtime_suspended(dev)) |
| ret = gnss_serial_set_power(gserial, GNSS_SERIAL_STANDBY); |
| |
| return ret; |
| } |
| |
| static int gnss_serial_resume(struct device *dev) |
| { |
| struct gnss_serial *gserial = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| if (!pm_runtime_suspended(dev)) |
| ret = gnss_serial_set_power(gserial, GNSS_SERIAL_ACTIVE); |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| const struct dev_pm_ops gnss_serial_pm_ops = { |
| .prepare = gnss_serial_prepare, |
| SET_SYSTEM_SLEEP_PM_OPS(gnss_serial_suspend, gnss_serial_resume) |
| SET_RUNTIME_PM_OPS(gnss_serial_runtime_suspend, gnss_serial_runtime_resume, NULL) |
| }; |
| EXPORT_SYMBOL_GPL(gnss_serial_pm_ops); |
| |
| MODULE_AUTHOR("Johan Hovold <johan@kernel.org>"); |
| MODULE_DESCRIPTION("Generic serial GNSS receiver driver"); |
| MODULE_LICENSE("GPL v2"); |