| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| // |
| // Copyright (c) 2018 BayLibre, SAS. |
| // Author: Jerome Brunet <jbrunet@baylibre.com> |
| |
| #include <linux/clk.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dai.h> |
| |
| #include "axg-fifo.h" |
| |
| /* |
| * This file implements the platform operations common to the playback and |
| * capture frontend DAI. The logic behind this two types of fifo is very |
| * similar but some difference exist. |
| * These differences are handled in the respective DAI drivers |
| */ |
| |
| static struct snd_pcm_hardware axg_fifo_hw = { |
| .info = (SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_PAUSE | |
| SNDRV_PCM_INFO_NO_PERIOD_WAKEUP), |
| .formats = AXG_FIFO_FORMATS, |
| .rate_min = 5512, |
| .rate_max = 192000, |
| .channels_min = 1, |
| .channels_max = AXG_FIFO_CH_MAX, |
| .period_bytes_min = AXG_FIFO_BURST, |
| .period_bytes_max = UINT_MAX, |
| .periods_min = 2, |
| .periods_max = UINT_MAX, |
| |
| /* No real justification for this */ |
| .buffer_bytes_max = 1 * 1024 * 1024, |
| }; |
| |
| static struct snd_soc_dai *axg_fifo_dai(struct snd_pcm_substream *ss) |
| { |
| struct snd_soc_pcm_runtime *rtd = ss->private_data; |
| |
| return asoc_rtd_to_cpu(rtd, 0); |
| } |
| |
| static struct axg_fifo *axg_fifo_data(struct snd_pcm_substream *ss) |
| { |
| struct snd_soc_dai *dai = axg_fifo_dai(ss); |
| |
| return snd_soc_dai_get_drvdata(dai); |
| } |
| |
| static struct device *axg_fifo_dev(struct snd_pcm_substream *ss) |
| { |
| struct snd_soc_dai *dai = axg_fifo_dai(ss); |
| |
| return dai->dev; |
| } |
| |
| static void __dma_enable(struct axg_fifo *fifo, bool enable) |
| { |
| regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_DMA_EN, |
| enable ? CTRL0_DMA_EN : 0); |
| } |
| |
| int axg_fifo_pcm_trigger(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss, int cmd) |
| { |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| __dma_enable(fifo, true); |
| break; |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| case SNDRV_PCM_TRIGGER_STOP: |
| __dma_enable(fifo, false); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_trigger); |
| |
| snd_pcm_uframes_t axg_fifo_pcm_pointer(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss) |
| { |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| struct snd_pcm_runtime *runtime = ss->runtime; |
| unsigned int addr; |
| |
| regmap_read(fifo->map, FIFO_STATUS2, &addr); |
| |
| return bytes_to_frames(runtime, addr - (unsigned int)runtime->dma_addr); |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_pointer); |
| |
| int axg_fifo_pcm_hw_params(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_pcm_runtime *runtime = ss->runtime; |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| unsigned int burst_num, period, threshold, irq_en; |
| dma_addr_t end_ptr; |
| |
| period = params_period_bytes(params); |
| |
| /* Setup dma memory pointers */ |
| end_ptr = runtime->dma_addr + runtime->dma_bytes - AXG_FIFO_BURST; |
| regmap_write(fifo->map, FIFO_START_ADDR, runtime->dma_addr); |
| regmap_write(fifo->map, FIFO_FINISH_ADDR, end_ptr); |
| |
| /* Setup interrupt periodicity */ |
| burst_num = period / AXG_FIFO_BURST; |
| regmap_write(fifo->map, FIFO_INT_ADDR, burst_num); |
| |
| /* |
| * Start the fifo request on the smallest of the following: |
| * - Half the fifo size |
| * - Half the period size |
| */ |
| threshold = min(period / 2, fifo->depth / 2); |
| |
| /* |
| * With the threshold in bytes, register value is: |
| * V = (threshold / burst) - 1 |
| */ |
| threshold /= AXG_FIFO_BURST; |
| regmap_field_write(fifo->field_threshold, |
| threshold ? threshold - 1 : 0); |
| |
| /* Enable irq if necessary */ |
| irq_en = runtime->no_period_wakeup ? 0 : FIFO_INT_COUNT_REPEAT; |
| regmap_update_bits(fifo->map, FIFO_CTRL0, |
| CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT), |
| CTRL0_INT_EN(irq_en)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_hw_params); |
| |
| int g12a_fifo_pcm_hw_params(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss, |
| struct snd_pcm_hw_params *params) |
| { |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| struct snd_pcm_runtime *runtime = ss->runtime; |
| int ret; |
| |
| ret = axg_fifo_pcm_hw_params(component, ss, params); |
| if (ret) |
| return ret; |
| |
| /* Set the initial memory address of the DMA */ |
| regmap_write(fifo->map, FIFO_INIT_ADDR, runtime->dma_addr); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(g12a_fifo_pcm_hw_params); |
| |
| int axg_fifo_pcm_hw_free(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss) |
| { |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| |
| /* Disable the block count irq */ |
| regmap_update_bits(fifo->map, FIFO_CTRL0, |
| CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT), 0); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_hw_free); |
| |
| static void axg_fifo_ack_irq(struct axg_fifo *fifo, u8 mask) |
| { |
| regmap_update_bits(fifo->map, FIFO_CTRL1, |
| CTRL1_INT_CLR(FIFO_INT_MASK), |
| CTRL1_INT_CLR(mask)); |
| |
| /* Clear must also be cleared */ |
| regmap_update_bits(fifo->map, FIFO_CTRL1, |
| CTRL1_INT_CLR(FIFO_INT_MASK), |
| 0); |
| } |
| |
| static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id) |
| { |
| struct snd_pcm_substream *ss = dev_id; |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| unsigned int status; |
| |
| regmap_read(fifo->map, FIFO_STATUS1, &status); |
| |
| status = STATUS1_INT_STS(status) & FIFO_INT_MASK; |
| if (status & FIFO_INT_COUNT_REPEAT) |
| snd_pcm_period_elapsed(ss); |
| else |
| dev_dbg(axg_fifo_dev(ss), "unexpected irq - STS 0x%02x\n", |
| status); |
| |
| /* Ack irqs */ |
| axg_fifo_ack_irq(fifo, status); |
| |
| return IRQ_RETVAL(status); |
| } |
| |
| int axg_fifo_pcm_open(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss) |
| { |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| struct device *dev = axg_fifo_dev(ss); |
| int ret; |
| |
| snd_soc_set_runtime_hwparams(ss, &axg_fifo_hw); |
| |
| /* |
| * Make sure the buffer and period size are multiple of the FIFO |
| * burst |
| */ |
| ret = snd_pcm_hw_constraint_step(ss->runtime, 0, |
| SNDRV_PCM_HW_PARAM_BUFFER_BYTES, |
| AXG_FIFO_BURST); |
| if (ret) |
| return ret; |
| |
| ret = snd_pcm_hw_constraint_step(ss->runtime, 0, |
| SNDRV_PCM_HW_PARAM_PERIOD_BYTES, |
| AXG_FIFO_BURST); |
| if (ret) |
| return ret; |
| |
| ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0, |
| dev_name(dev), ss); |
| if (ret) |
| return ret; |
| |
| /* Enable pclk to access registers and clock the fifo ip */ |
| ret = clk_prepare_enable(fifo->pclk); |
| if (ret) |
| goto free_irq; |
| |
| /* Setup status2 so it reports the memory pointer */ |
| regmap_update_bits(fifo->map, FIFO_CTRL1, |
| CTRL1_STATUS2_SEL_MASK, |
| CTRL1_STATUS2_SEL(STATUS2_SEL_DDR_READ)); |
| |
| /* Make sure the dma is initially disabled */ |
| __dma_enable(fifo, false); |
| |
| /* Disable irqs until params are ready */ |
| regmap_update_bits(fifo->map, FIFO_CTRL0, |
| CTRL0_INT_EN(FIFO_INT_MASK), 0); |
| |
| /* Clear any pending interrupt */ |
| axg_fifo_ack_irq(fifo, FIFO_INT_MASK); |
| |
| /* Take memory arbitror out of reset */ |
| ret = reset_control_deassert(fifo->arb); |
| if (ret) |
| goto free_clk; |
| |
| return 0; |
| |
| free_clk: |
| clk_disable_unprepare(fifo->pclk); |
| free_irq: |
| free_irq(fifo->irq, ss); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_open); |
| |
| int axg_fifo_pcm_close(struct snd_soc_component *component, |
| struct snd_pcm_substream *ss) |
| { |
| struct axg_fifo *fifo = axg_fifo_data(ss); |
| int ret; |
| |
| /* Put the memory arbitror back in reset */ |
| ret = reset_control_assert(fifo->arb); |
| |
| /* Disable fifo ip and register access */ |
| clk_disable_unprepare(fifo->pclk); |
| |
| /* remove IRQ */ |
| free_irq(fifo->irq, ss); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_close); |
| |
| int axg_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd, unsigned int type) |
| { |
| struct snd_card *card = rtd->card->snd_card; |
| size_t size = axg_fifo_hw.buffer_bytes_max; |
| |
| snd_pcm_set_managed_buffer(rtd->pcm->streams[type].substream, |
| SNDRV_DMA_TYPE_DEV, card->dev, |
| size, size); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_pcm_new); |
| |
| static const struct regmap_config axg_fifo_regmap_cfg = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = FIFO_CTRL2, |
| }; |
| |
| int axg_fifo_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct axg_fifo_match_data *data; |
| struct axg_fifo *fifo; |
| void __iomem *regs; |
| int ret; |
| |
| data = of_device_get_match_data(dev); |
| if (!data) { |
| dev_err(dev, "failed to match device\n"); |
| return -ENODEV; |
| } |
| |
| fifo = devm_kzalloc(dev, sizeof(*fifo), GFP_KERNEL); |
| if (!fifo) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, fifo); |
| |
| regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| fifo->map = devm_regmap_init_mmio(dev, regs, &axg_fifo_regmap_cfg); |
| if (IS_ERR(fifo->map)) { |
| dev_err(dev, "failed to init regmap: %ld\n", |
| PTR_ERR(fifo->map)); |
| return PTR_ERR(fifo->map); |
| } |
| |
| fifo->pclk = devm_clk_get(dev, NULL); |
| if (IS_ERR(fifo->pclk)) |
| return dev_err_probe(dev, PTR_ERR(fifo->pclk), "failed to get pclk\n"); |
| |
| fifo->arb = devm_reset_control_get_exclusive(dev, NULL); |
| if (IS_ERR(fifo->arb)) |
| return dev_err_probe(dev, PTR_ERR(fifo->arb), "failed to get arb reset\n"); |
| |
| fifo->irq = of_irq_get(dev->of_node, 0); |
| if (fifo->irq <= 0) { |
| dev_err(dev, "failed to get irq: %d\n", fifo->irq); |
| return fifo->irq; |
| } |
| |
| fifo->field_threshold = |
| devm_regmap_field_alloc(dev, fifo->map, data->field_threshold); |
| if (IS_ERR(fifo->field_threshold)) |
| return PTR_ERR(fifo->field_threshold); |
| |
| ret = of_property_read_u32(dev->of_node, "amlogic,fifo-depth", |
| &fifo->depth); |
| if (ret) { |
| /* Error out for anything but a missing property */ |
| if (ret != -EINVAL) |
| return ret; |
| /* |
| * If the property is missing, it might be because of an old |
| * DT. In such case, assume the smallest known fifo depth |
| */ |
| fifo->depth = 256; |
| dev_warn(dev, "fifo depth not found, assume %u bytes\n", |
| fifo->depth); |
| } |
| |
| return devm_snd_soc_register_component(dev, data->component_drv, |
| data->dai_drv, 1); |
| } |
| EXPORT_SYMBOL_GPL(axg_fifo_probe); |
| |
| MODULE_DESCRIPTION("Amlogic AXG/G12A fifo driver"); |
| MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |