| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2021, Linaro Limited |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| #include <sound/pcm_params.h> |
| #include "q6dsp-lpass-ports.h" |
| #include "audioreach.h" |
| #include "q6apm.h" |
| |
| #define AUDIOREACH_BE_PCM_BASE 16 |
| |
| struct q6apm_lpass_dai_data { |
| struct q6apm_graph *graph[APM_PORT_MAX]; |
| bool is_port_started[APM_PORT_MAX]; |
| struct audioreach_module_config module_config[APM_PORT_MAX]; |
| }; |
| |
| static int q6dma_set_channel_map(struct snd_soc_dai *dai, |
| unsigned int tx_num, unsigned int *tx_ch_mask, |
| unsigned int rx_num, unsigned int *rx_ch_mask) |
| { |
| |
| struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; |
| int ch_mask; |
| |
| switch (dai->id) { |
| case WSA_CODEC_DMA_TX_0: |
| case WSA_CODEC_DMA_TX_1: |
| case WSA_CODEC_DMA_TX_2: |
| case VA_CODEC_DMA_TX_0: |
| case VA_CODEC_DMA_TX_1: |
| case VA_CODEC_DMA_TX_2: |
| case TX_CODEC_DMA_TX_0: |
| case TX_CODEC_DMA_TX_1: |
| case TX_CODEC_DMA_TX_2: |
| case TX_CODEC_DMA_TX_3: |
| case TX_CODEC_DMA_TX_4: |
| case TX_CODEC_DMA_TX_5: |
| if (!tx_ch_mask) { |
| dev_err(dai->dev, "tx slot not found\n"); |
| return -EINVAL; |
| } |
| |
| if (tx_num > AR_PCM_MAX_NUM_CHANNEL) { |
| dev_err(dai->dev, "invalid tx num %d\n", |
| tx_num); |
| return -EINVAL; |
| } |
| ch_mask = *tx_ch_mask; |
| |
| break; |
| case WSA_CODEC_DMA_RX_0: |
| case WSA_CODEC_DMA_RX_1: |
| case RX_CODEC_DMA_RX_0: |
| case RX_CODEC_DMA_RX_1: |
| case RX_CODEC_DMA_RX_2: |
| case RX_CODEC_DMA_RX_3: |
| case RX_CODEC_DMA_RX_4: |
| case RX_CODEC_DMA_RX_5: |
| case RX_CODEC_DMA_RX_6: |
| case RX_CODEC_DMA_RX_7: |
| /* rx */ |
| if (!rx_ch_mask) { |
| dev_err(dai->dev, "rx slot not found\n"); |
| return -EINVAL; |
| } |
| if (rx_num > APM_PORT_MAX_AUDIO_CHAN_CNT) { |
| dev_err(dai->dev, "invalid rx num %d\n", |
| rx_num); |
| return -EINVAL; |
| } |
| ch_mask = *rx_ch_mask; |
| |
| break; |
| default: |
| dev_err(dai->dev, "%s: invalid dai id 0x%x\n", |
| __func__, dai->id); |
| return -EINVAL; |
| } |
| |
| cfg->active_channels_mask = ch_mask; |
| |
| return 0; |
| } |
| |
| static int q6dma_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) |
| { |
| struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; |
| |
| cfg->bit_width = params_width(params); |
| cfg->sample_rate = params_rate(params); |
| cfg->num_channels = params_channels(params); |
| |
| return 0; |
| } |
| |
| static void q6apm_lpass_dai_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) |
| { |
| struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| int rc; |
| |
| if (!dai_data->is_port_started[dai->id]) |
| return; |
| rc = q6apm_graph_stop(dai_data->graph[dai->id]); |
| if (rc < 0) |
| dev_err(dai->dev, "fail to close APM port (%d)\n", rc); |
| |
| q6apm_graph_close(dai_data->graph[dai->id]); |
| dai_data->is_port_started[dai->id] = false; |
| } |
| |
| static int q6apm_lpass_dai_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) |
| { |
| struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; |
| struct q6apm_graph *graph; |
| int graph_id = dai->id; |
| int rc; |
| |
| if (dai_data->is_port_started[dai->id]) { |
| q6apm_graph_stop(dai_data->graph[dai->id]); |
| dai_data->is_port_started[dai->id] = false; |
| } |
| |
| /** |
| * It is recommend to load DSP with source graph first and then sink |
| * graph, so sequence for playback and capture will be different |
| */ |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id); |
| if (IS_ERR(graph)) { |
| dev_err(dai->dev, "Failed to open graph (%d)\n", graph_id); |
| rc = PTR_ERR(graph); |
| return rc; |
| } |
| dai_data->graph[graph_id] = graph; |
| } |
| |
| cfg->direction = substream->stream; |
| rc = q6apm_graph_media_format_pcm(dai_data->graph[dai->id], cfg); |
| |
| if (rc) { |
| dev_err(dai->dev, "Failed to set media format %d\n", rc); |
| return rc; |
| } |
| |
| rc = q6apm_graph_prepare(dai_data->graph[dai->id]); |
| if (rc) { |
| dev_err(dai->dev, "Failed to prepare Graph %d\n", rc); |
| return rc; |
| } |
| |
| rc = q6apm_graph_start(dai_data->graph[dai->id]); |
| if (rc < 0) { |
| dev_err(dai->dev, "fail to start APM port %x\n", dai->id); |
| return rc; |
| } |
| dai_data->is_port_started[dai->id] = true; |
| |
| return 0; |
| } |
| |
| static int q6apm_lpass_dai_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) |
| { |
| struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct q6apm_graph *graph; |
| int graph_id = dai->id; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { |
| graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id); |
| if (IS_ERR(graph)) { |
| dev_err(dai->dev, "Failed to open graph (%d)\n", graph_id); |
| return PTR_ERR(graph); |
| } |
| dai_data->graph[graph_id] = graph; |
| } |
| |
| return 0; |
| } |
| |
| static int q6i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; |
| |
| cfg->fmt = fmt; |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops q6dma_ops = { |
| .prepare = q6apm_lpass_dai_prepare, |
| .startup = q6apm_lpass_dai_startup, |
| .shutdown = q6apm_lpass_dai_shutdown, |
| .set_channel_map = q6dma_set_channel_map, |
| .hw_params = q6dma_hw_params, |
| }; |
| |
| static const struct snd_soc_dai_ops q6i2s_ops = { |
| .prepare = q6apm_lpass_dai_prepare, |
| .startup = q6apm_lpass_dai_startup, |
| .shutdown = q6apm_lpass_dai_shutdown, |
| .set_channel_map = q6dma_set_channel_map, |
| .hw_params = q6dma_hw_params, |
| .set_fmt = q6i2s_set_fmt, |
| }; |
| |
| static const struct snd_soc_component_driver q6apm_lpass_dai_component = { |
| .name = "q6apm-be-dai-component", |
| .of_xlate_dai_name = q6dsp_audio_ports_of_xlate_dai_name, |
| .be_pcm_base = AUDIOREACH_BE_PCM_BASE, |
| .use_dai_pcm_id = true, |
| }; |
| |
| static int q6apm_lpass_dai_dev_probe(struct platform_device *pdev) |
| { |
| struct q6dsp_audio_port_dai_driver_config cfg; |
| struct q6apm_lpass_dai_data *dai_data; |
| struct snd_soc_dai_driver *dais; |
| struct device *dev = &pdev->dev; |
| int num_dais; |
| |
| dai_data = devm_kzalloc(dev, sizeof(*dai_data), GFP_KERNEL); |
| if (!dai_data) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, dai_data); |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| cfg.q6i2s_ops = &q6i2s_ops; |
| cfg.q6dma_ops = &q6dma_ops; |
| dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais); |
| |
| return devm_snd_soc_register_component(dev, &q6apm_lpass_dai_component, dais, num_dais); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id q6apm_lpass_dai_device_id[] = { |
| { .compatible = "qcom,q6apm-lpass-dais" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, q6apm_lpass_dai_device_id); |
| #endif |
| |
| static struct platform_driver q6apm_lpass_dai_platform_driver = { |
| .driver = { |
| .name = "q6apm-lpass-dais", |
| .of_match_table = of_match_ptr(q6apm_lpass_dai_device_id), |
| }, |
| .probe = q6apm_lpass_dai_dev_probe, |
| }; |
| module_platform_driver(q6apm_lpass_dai_platform_driver); |
| |
| MODULE_DESCRIPTION("AUDIOREACH APM LPASS dai driver"); |
| MODULE_LICENSE("GPL"); |