| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) | |
| * | |
| * RajeshwarR: Dec 11, 2007 | |
| * -- Added support for Inter Processor Interrupts | |
| * | |
| * Vineetg: Nov 1st, 2007 | |
| * -- Initial Write (Borrowed heavily from ARM) | |
| */ | |
| #include <linux/spinlock.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mm.h> | |
| #include <linux/cpu.h> | |
| #include <linux/irq.h> | |
| #include <linux/atomic.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/reboot.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/export.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/string.h> | |
| #include <asm/mach_desc.h> | |
| #include <asm/setup.h> | |
| #include <asm/smp.h> | |
| #include <asm/processor.h> | |
| #ifndef CONFIG_ARC_HAS_LLSC | |
| arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED; | |
| EXPORT_SYMBOL_GPL(smp_atomic_ops_lock); | |
| #endif | |
| struct plat_smp_ops __weak plat_smp_ops; | |
| /* XXX: per cpu ? Only needed once in early secondary boot */ | |
| struct task_struct *secondary_idle_tsk; | |
| static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask) | |
| { | |
| unsigned long dt_root = of_get_flat_dt_root(); | |
| const char *buf; | |
| int len; | |
| buf = of_get_flat_dt_prop(dt_root, name, &len); | |
| if (!buf || !memchr(buf, '\0', len)) | |
| return -EINVAL; | |
| if (cpulist_parse(buf, cpumask)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* | |
| * Read from DeviceTree and setup cpu possible mask. If there is no | |
| * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist. | |
| */ | |
| static void __init arc_init_cpu_possible(void) | |
| { | |
| struct cpumask cpumask; | |
| if (arc_get_cpu_map("possible-cpus", &cpumask)) { | |
| pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n", | |
| NR_CPUS); | |
| cpumask_setall(&cpumask); | |
| } | |
| if (!cpumask_test_cpu(0, &cpumask)) | |
| panic("Master cpu (cpu[0]) is missed in cpu possible mask!"); | |
| init_cpu_possible(&cpumask); | |
| } | |
| /* | |
| * Called from setup_arch() before calling setup_processor() | |
| * | |
| * - Initialise the CPU possible map early - this describes the CPUs | |
| * which may be present or become present in the system. | |
| * - Call early smp init hook. This can initialize a specific multi-core | |
| * IP which is say common to several platforms (hence not part of | |
| * platform specific int_early() hook) | |
| */ | |
| void __init smp_init_cpus(void) | |
| { | |
| arc_init_cpu_possible(); | |
| if (plat_smp_ops.init_early_smp) | |
| plat_smp_ops.init_early_smp(); | |
| } | |
| /* called from init ( ) => process 1 */ | |
| void __init smp_prepare_cpus(unsigned int max_cpus) | |
| { | |
| /* | |
| * if platform didn't set the present map already, do it now | |
| * boot cpu is set to present already by init/main.c | |
| */ | |
| if (num_present_cpus() <= 1) | |
| init_cpu_present(cpu_possible_mask); | |
| } | |
| void __init smp_cpus_done(unsigned int max_cpus) | |
| { | |
| } | |
| /* | |
| * Default smp boot helper for Run-on-reset case where all cores start off | |
| * together. Non-masters need to wait for Master to start running. | |
| * This is implemented using a flag in memory, which Non-masters spin-wait on. | |
| * Master sets it to cpu-id of core to "ungate" it. | |
| */ | |
| static volatile int wake_flag; | |
| #ifdef CONFIG_ISA_ARCOMPACT | |
| #define __boot_read(f) f | |
| #define __boot_write(f, v) f = v | |
| #else | |
| #define __boot_read(f) arc_read_uncached_32(&f) | |
| #define __boot_write(f, v) arc_write_uncached_32(&f, v) | |
| #endif | |
| static void arc_default_smp_cpu_kick(int cpu, unsigned long pc) | |
| { | |
| BUG_ON(cpu == 0); | |
| __boot_write(wake_flag, cpu); | |
| } | |
| void arc_platform_smp_wait_to_boot(int cpu) | |
| { | |
| /* for halt-on-reset, we've waited already */ | |
| if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET)) | |
| return; | |
| while (__boot_read(wake_flag) != cpu) | |
| ; | |
| __boot_write(wake_flag, 0); | |
| } | |
| const char *arc_platform_smp_cpuinfo(void) | |
| { | |
| return plat_smp_ops.info ? : ""; | |
| } | |
| /* | |
| * The very first "C" code executed by secondary | |
| * Called from asm stub in head.S | |
| * "current"/R25 already setup by low level boot code | |
| */ | |
| void start_kernel_secondary(void) | |
| { | |
| struct mm_struct *mm = &init_mm; | |
| unsigned int cpu = smp_processor_id(); | |
| /* MMU, Caches, Vector Table, Interrupts etc */ | |
| setup_processor(); | |
| mmget(mm); | |
| mmgrab(mm); | |
| current->active_mm = mm; | |
| cpumask_set_cpu(cpu, mm_cpumask(mm)); | |
| /* Some SMP H/w setup - for each cpu */ | |
| if (plat_smp_ops.init_per_cpu) | |
| plat_smp_ops.init_per_cpu(cpu); | |
| if (machine_desc->init_per_cpu) | |
| machine_desc->init_per_cpu(cpu); | |
| notify_cpu_starting(cpu); | |
| set_cpu_online(cpu, true); | |
| pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); | |
| local_irq_enable(); | |
| cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); | |
| } | |
| /* | |
| * Called from kernel_init( ) -> smp_init( ) - for each CPU | |
| * | |
| * At this point, Secondary Processor is "HALT"ed: | |
| * -It booted, but was halted in head.S | |
| * -It was configured to halt-on-reset | |
| * So need to wake it up. | |
| * | |
| * Essential requirements being where to run from (PC) and stack (SP) | |
| */ | |
| int __cpu_up(unsigned int cpu, struct task_struct *idle) | |
| { | |
| unsigned long wait_till; | |
| secondary_idle_tsk = idle; | |
| pr_info("Idle Task [%d] %p", cpu, idle); | |
| pr_info("Trying to bring up CPU%u ...\n", cpu); | |
| if (plat_smp_ops.cpu_kick) | |
| plat_smp_ops.cpu_kick(cpu, | |
| (unsigned long)first_lines_of_secondary); | |
| else | |
| arc_default_smp_cpu_kick(cpu, (unsigned long)NULL); | |
| /* wait for 1 sec after kicking the secondary */ | |
| wait_till = jiffies + HZ; | |
| while (time_before(jiffies, wait_till)) { | |
| if (cpu_online(cpu)) | |
| break; | |
| } | |
| if (!cpu_online(cpu)) { | |
| pr_info("Timeout: CPU%u FAILED to come up !!!\n", cpu); | |
| return -1; | |
| } | |
| secondary_idle_tsk = NULL; | |
| return 0; | |
| } | |
| /*****************************************************************************/ | |
| /* Inter Processor Interrupt Handling */ | |
| /*****************************************************************************/ | |
| enum ipi_msg_type { | |
| IPI_EMPTY = 0, | |
| IPI_RESCHEDULE = 1, | |
| IPI_CALL_FUNC, | |
| IPI_CPU_STOP, | |
| }; | |
| /* | |
| * In arches with IRQ for each msg type (above), receiver can use IRQ-id to | |
| * figure out what msg was sent. For those which don't (ARC has dedicated IPI | |
| * IRQ), the msg-type needs to be conveyed via per-cpu data | |
| */ | |
| static DEFINE_PER_CPU(unsigned long, ipi_data); | |
| static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg) | |
| { | |
| unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu); | |
| unsigned long old, new; | |
| unsigned long flags; | |
| pr_debug("%d Sending msg [%d] to %d\n", smp_processor_id(), msg, cpu); | |
| local_irq_save(flags); | |
| /* | |
| * Atomically write new msg bit (in case others are writing too), | |
| * and read back old value | |
| */ | |
| do { | |
| new = old = *ipi_data_ptr; | |
| new |= 1U << msg; | |
| } while (cmpxchg(ipi_data_ptr, old, new) != old); | |
| /* | |
| * Call the platform specific IPI kick function, but avoid if possible: | |
| * Only do so if there's no pending msg from other concurrent sender(s). | |
| * Otherwise, receiver will see this msg as well when it takes the | |
| * IPI corresponding to that msg. This is true, even if it is already in | |
| * IPI handler, because !@old means it has not yet dequeued the msg(s) | |
| * so @new msg can be a free-loader | |
| */ | |
| if (plat_smp_ops.ipi_send && !old) | |
| plat_smp_ops.ipi_send(cpu); | |
| local_irq_restore(flags); | |
| } | |
| static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg) | |
| { | |
| unsigned int cpu; | |
| for_each_cpu(cpu, callmap) | |
| ipi_send_msg_one(cpu, msg); | |
| } | |
| void arch_smp_send_reschedule(int cpu) | |
| { | |
| ipi_send_msg_one(cpu, IPI_RESCHEDULE); | |
| } | |
| void smp_send_stop(void) | |
| { | |
| struct cpumask targets; | |
| cpumask_copy(&targets, cpu_online_mask); | |
| cpumask_clear_cpu(smp_processor_id(), &targets); | |
| ipi_send_msg(&targets, IPI_CPU_STOP); | |
| } | |
| void arch_send_call_function_single_ipi(int cpu) | |
| { | |
| ipi_send_msg_one(cpu, IPI_CALL_FUNC); | |
| } | |
| void arch_send_call_function_ipi_mask(const struct cpumask *mask) | |
| { | |
| ipi_send_msg(mask, IPI_CALL_FUNC); | |
| } | |
| /* | |
| * ipi_cpu_stop - handle IPI from smp_send_stop() | |
| */ | |
| static void ipi_cpu_stop(void) | |
| { | |
| machine_halt(); | |
| } | |
| static inline int __do_IPI(unsigned long msg) | |
| { | |
| int rc = 0; | |
| switch (msg) { | |
| case IPI_RESCHEDULE: | |
| scheduler_ipi(); | |
| break; | |
| case IPI_CALL_FUNC: | |
| generic_smp_call_function_interrupt(); | |
| break; | |
| case IPI_CPU_STOP: | |
| ipi_cpu_stop(); | |
| break; | |
| default: | |
| rc = 1; | |
| } | |
| return rc; | |
| } | |
| /* | |
| * arch-common ISR to handle for inter-processor interrupts | |
| * Has hooks for platform specific IPI | |
| */ | |
| static irqreturn_t do_IPI(int irq, void *dev_id) | |
| { | |
| unsigned long pending; | |
| unsigned long __maybe_unused copy; | |
| pr_debug("IPI [%ld] received on cpu %d\n", | |
| *this_cpu_ptr(&ipi_data), smp_processor_id()); | |
| if (plat_smp_ops.ipi_clear) | |
| plat_smp_ops.ipi_clear(irq); | |
| /* | |
| * "dequeue" the msg corresponding to this IPI (and possibly other | |
| * piggybacked msg from elided IPIs: see ipi_send_msg_one() above) | |
| */ | |
| copy = pending = xchg(this_cpu_ptr(&ipi_data), 0); | |
| do { | |
| unsigned long msg = __ffs(pending); | |
| int rc; | |
| rc = __do_IPI(msg); | |
| if (rc) | |
| pr_info("IPI with bogus msg %ld in %ld\n", msg, copy); | |
| pending &= ~(1U << msg); | |
| } while (pending); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * API called by platform code to hookup arch-common ISR to their IPI IRQ | |
| * | |
| * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map | |
| * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise | |
| * request_percpu_irq() below will fail | |
| */ | |
| static DEFINE_PER_CPU(int, ipi_dev); | |
| int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq) | |
| { | |
| int *dev = per_cpu_ptr(&ipi_dev, cpu); | |
| unsigned int virq = irq_find_mapping(NULL, hwirq); | |
| if (!virq) | |
| panic("Cannot find virq for root domain and hwirq=%lu", hwirq); | |
| /* Boot cpu calls request, all call enable */ | |
| if (!cpu) { | |
| int rc; | |
| rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev); | |
| if (rc) | |
| panic("Percpu IRQ request failed for %u\n", virq); | |
| } | |
| enable_percpu_irq(virq, 0); | |
| return 0; | |
| } |