| // SPDX-License-Identifier: GPL-2.0+ | |
| // | |
| // extcon-max14577.c - MAX14577/77836 extcon driver to support MUIC | |
| // | |
| // Copyright (C) 2013,2014 Samsung Electronics | |
| // Chanwoo Choi <cw00.choi@samsung.com> | |
| // Krzysztof Kozlowski <krzk@kernel.org> | |
| #include <linux/devm-helpers.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mfd/max14577.h> | |
| #include <linux/mfd/max14577-private.h> | |
| #include <linux/extcon-provider.h> | |
| #define DELAY_MS_DEFAULT 17000 /* unit: millisecond */ | |
| enum max14577_muic_adc_debounce_time { | |
| ADC_DEBOUNCE_TIME_5MS = 0, | |
| ADC_DEBOUNCE_TIME_10MS, | |
| ADC_DEBOUNCE_TIME_25MS, | |
| ADC_DEBOUNCE_TIME_38_62MS, | |
| }; | |
| enum max14577_muic_status { | |
| MAX14577_MUIC_STATUS1 = 0, | |
| MAX14577_MUIC_STATUS2 = 1, | |
| MAX14577_MUIC_STATUS_END, | |
| }; | |
| /** | |
| * struct max14577_muic_irq | |
| * @irq: the index of irq list of MUIC device. | |
| * @name: the name of irq. | |
| * @virq: the virtual irq to use irq domain | |
| */ | |
| struct max14577_muic_irq { | |
| unsigned int irq; | |
| const char *name; | |
| unsigned int virq; | |
| }; | |
| static struct max14577_muic_irq max14577_muic_irqs[] = { | |
| { MAX14577_IRQ_INT1_ADC, "muic-ADC" }, | |
| { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" }, | |
| { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" }, | |
| { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, | |
| { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" }, | |
| { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, | |
| { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" }, | |
| { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, | |
| }; | |
| static struct max14577_muic_irq max77836_muic_irqs[] = { | |
| { MAX14577_IRQ_INT1_ADC, "muic-ADC" }, | |
| { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" }, | |
| { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" }, | |
| { MAX77836_IRQ_INT1_ADC1K, "muic-ADC1K" }, | |
| { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, | |
| { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" }, | |
| { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, | |
| { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" }, | |
| { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, | |
| { MAX77836_IRQ_INT2_VIDRM, "muic-VIDRM" }, | |
| }; | |
| struct max14577_muic_info { | |
| struct device *dev; | |
| struct max14577 *max14577; | |
| struct extcon_dev *edev; | |
| int prev_cable_type; | |
| int prev_chg_type; | |
| u8 status[MAX14577_MUIC_STATUS_END]; | |
| struct max14577_muic_irq *muic_irqs; | |
| unsigned int muic_irqs_num; | |
| bool irq_adc; | |
| bool irq_chg; | |
| struct work_struct irq_work; | |
| struct mutex mutex; | |
| /* | |
| * Use delayed workqueue to detect cable state and then | |
| * notify cable state to notifiee/platform through uevent. | |
| * After completing the booting of platform, the extcon provider | |
| * driver should notify cable state to upper layer. | |
| */ | |
| struct delayed_work wq_detcable; | |
| /* | |
| * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB | |
| * h/w path of COMP2/COMN1 on CONTROL1 register. | |
| */ | |
| int path_usb; | |
| int path_uart; | |
| }; | |
| enum max14577_muic_cable_group { | |
| MAX14577_CABLE_GROUP_ADC = 0, | |
| MAX14577_CABLE_GROUP_CHG, | |
| }; | |
| /* Define supported accessory type */ | |
| enum max14577_muic_acc_type { | |
| MAX14577_MUIC_ADC_GROUND = 0x0, | |
| MAX14577_MUIC_ADC_SEND_END_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S1_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S2_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S3_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S4_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S5_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S6_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S7_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S8_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S9_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S10_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S11_BUTTON, | |
| MAX14577_MUIC_ADC_REMOTE_S12_BUTTON, | |
| MAX14577_MUIC_ADC_RESERVED_ACC_1, | |
| MAX14577_MUIC_ADC_RESERVED_ACC_2, | |
| MAX14577_MUIC_ADC_RESERVED_ACC_3, | |
| MAX14577_MUIC_ADC_RESERVED_ACC_4, | |
| MAX14577_MUIC_ADC_RESERVED_ACC_5, | |
| MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2, | |
| MAX14577_MUIC_ADC_PHONE_POWERED_DEV, | |
| MAX14577_MUIC_ADC_TTY_CONVERTER, | |
| MAX14577_MUIC_ADC_UART_CABLE, | |
| MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG, | |
| MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF, | |
| MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON, | |
| MAX14577_MUIC_ADC_AV_CABLE_NOLOAD, | |
| MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG, | |
| MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF, | |
| MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON, | |
| MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1, /* with Remote and Simple Ctrl */ | |
| MAX14577_MUIC_ADC_OPEN, | |
| }; | |
| static const unsigned int max14577_extcon_cable[] = { | |
| EXTCON_USB, | |
| EXTCON_CHG_USB_SDP, | |
| EXTCON_CHG_USB_DCP, | |
| EXTCON_CHG_USB_FAST, | |
| EXTCON_CHG_USB_SLOW, | |
| EXTCON_CHG_USB_CDP, | |
| EXTCON_JIG, | |
| EXTCON_NONE, | |
| }; | |
| /* | |
| * max14577_muic_set_debounce_time - Set the debounce time of ADC | |
| * @info: the instance including private data of max14577 MUIC | |
| * @time: the debounce time of ADC | |
| */ | |
| static int max14577_muic_set_debounce_time(struct max14577_muic_info *info, | |
| enum max14577_muic_adc_debounce_time time) | |
| { | |
| u8 ret; | |
| switch (time) { | |
| case ADC_DEBOUNCE_TIME_5MS: | |
| case ADC_DEBOUNCE_TIME_10MS: | |
| case ADC_DEBOUNCE_TIME_25MS: | |
| case ADC_DEBOUNCE_TIME_38_62MS: | |
| ret = max14577_update_reg(info->max14577->regmap, | |
| MAX14577_MUIC_REG_CONTROL3, | |
| CTRL3_ADCDBSET_MASK, | |
| time << CTRL3_ADCDBSET_SHIFT); | |
| if (ret) { | |
| dev_err(info->dev, "failed to set ADC debounce time\n"); | |
| return ret; | |
| } | |
| break; | |
| default: | |
| dev_err(info->dev, "invalid ADC debounce time\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| }; | |
| /* | |
| * max14577_muic_set_path - Set hardware line according to attached cable | |
| * @info: the instance including private data of max14577 MUIC | |
| * @value: the path according to attached cable | |
| * @attached: the state of cable (true:attached, false:detached) | |
| * | |
| * The max14577 MUIC device share outside H/W line among a varity of cables | |
| * so, this function set internal path of H/W line according to the type of | |
| * attached cable. | |
| */ | |
| static int max14577_muic_set_path(struct max14577_muic_info *info, | |
| u8 val, bool attached) | |
| { | |
| u8 ctrl1, ctrl2 = 0; | |
| int ret; | |
| /* Set open state to path before changing hw path */ | |
| ret = max14577_update_reg(info->max14577->regmap, | |
| MAX14577_MUIC_REG_CONTROL1, | |
| CLEAR_IDBEN_MICEN_MASK, CTRL1_SW_OPEN); | |
| if (ret < 0) { | |
| dev_err(info->dev, "failed to update MUIC register\n"); | |
| return ret; | |
| } | |
| if (attached) | |
| ctrl1 = val; | |
| else | |
| ctrl1 = CTRL1_SW_OPEN; | |
| ret = max14577_update_reg(info->max14577->regmap, | |
| MAX14577_MUIC_REG_CONTROL1, | |
| CLEAR_IDBEN_MICEN_MASK, ctrl1); | |
| if (ret < 0) { | |
| dev_err(info->dev, "failed to update MUIC register\n"); | |
| return ret; | |
| } | |
| if (attached) | |
| ctrl2 |= CTRL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ | |
| else | |
| ctrl2 |= CTRL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ | |
| ret = max14577_update_reg(info->max14577->regmap, | |
| MAX14577_REG_CONTROL2, | |
| CTRL2_LOWPWR_MASK | CTRL2_CPEN_MASK, ctrl2); | |
| if (ret < 0) { | |
| dev_err(info->dev, "failed to update MUIC register\n"); | |
| return ret; | |
| } | |
| dev_dbg(info->dev, | |
| "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", | |
| ctrl1, ctrl2, attached ? "attached" : "detached"); | |
| return 0; | |
| } | |
| /* | |
| * max14577_muic_get_cable_type - Return cable type and check cable state | |
| * @info: the instance including private data of max14577 MUIC | |
| * @group: the path according to attached cable | |
| * @attached: store cable state and return | |
| * | |
| * This function check the cable state either attached or detached, | |
| * and then divide precise type of cable according to cable group. | |
| * - max14577_CABLE_GROUP_ADC | |
| * - max14577_CABLE_GROUP_CHG | |
| */ | |
| static int max14577_muic_get_cable_type(struct max14577_muic_info *info, | |
| enum max14577_muic_cable_group group, bool *attached) | |
| { | |
| int cable_type = 0; | |
| int adc; | |
| int chg_type; | |
| switch (group) { | |
| case MAX14577_CABLE_GROUP_ADC: | |
| /* | |
| * Read ADC value to check cable type and decide cable state | |
| * according to cable type | |
| */ | |
| adc = info->status[MAX14577_MUIC_STATUS1] & STATUS1_ADC_MASK; | |
| adc >>= STATUS1_ADC_SHIFT; | |
| /* | |
| * Check current cable state/cable type and store cable type | |
| * (info->prev_cable_type) for handling cable when cable is | |
| * detached. | |
| */ | |
| if (adc == MAX14577_MUIC_ADC_OPEN) { | |
| *attached = false; | |
| cable_type = info->prev_cable_type; | |
| info->prev_cable_type = MAX14577_MUIC_ADC_OPEN; | |
| } else { | |
| *attached = true; | |
| cable_type = info->prev_cable_type = adc; | |
| } | |
| break; | |
| case MAX14577_CABLE_GROUP_CHG: | |
| /* | |
| * Read charger type to check cable type and decide cable state | |
| * according to type of charger cable. | |
| */ | |
| chg_type = info->status[MAX14577_MUIC_STATUS2] & | |
| STATUS2_CHGTYP_MASK; | |
| chg_type >>= STATUS2_CHGTYP_SHIFT; | |
| if (chg_type == MAX14577_CHARGER_TYPE_NONE) { | |
| *attached = false; | |
| cable_type = info->prev_chg_type; | |
| info->prev_chg_type = MAX14577_CHARGER_TYPE_NONE; | |
| } else { | |
| *attached = true; | |
| /* | |
| * Check current cable state/cable type and store cable | |
| * type(info->prev_chg_type) for handling cable when | |
| * charger cable is detached. | |
| */ | |
| cable_type = info->prev_chg_type = chg_type; | |
| } | |
| break; | |
| default: | |
| dev_err(info->dev, "Unknown cable group (%d)\n", group); | |
| cable_type = -EINVAL; | |
| break; | |
| } | |
| return cable_type; | |
| } | |
| static int max14577_muic_jig_handler(struct max14577_muic_info *info, | |
| int cable_type, bool attached) | |
| { | |
| int ret = 0; | |
| u8 path = CTRL1_SW_OPEN; | |
| dev_dbg(info->dev, | |
| "external connector is %s (adc:0x%02x)\n", | |
| attached ? "attached" : "detached", cable_type); | |
| switch (cable_type) { | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */ | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */ | |
| /* PATH:AP_USB */ | |
| path = CTRL1_SW_USB; | |
| break; | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */ | |
| /* PATH:AP_UART */ | |
| path = CTRL1_SW_UART; | |
| break; | |
| default: | |
| dev_err(info->dev, "failed to detect %s jig cable\n", | |
| attached ? "attached" : "detached"); | |
| return -EINVAL; | |
| } | |
| ret = max14577_muic_set_path(info, path, attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_JIG, attached); | |
| return 0; | |
| } | |
| static int max14577_muic_adc_handler(struct max14577_muic_info *info) | |
| { | |
| int cable_type; | |
| bool attached; | |
| int ret = 0; | |
| /* Check accessory state which is either detached or attached */ | |
| cable_type = max14577_muic_get_cable_type(info, | |
| MAX14577_CABLE_GROUP_ADC, &attached); | |
| dev_dbg(info->dev, | |
| "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", | |
| attached ? "attached" : "detached", cable_type, | |
| info->prev_cable_type); | |
| switch (cable_type) { | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: | |
| /* JIG */ | |
| ret = max14577_muic_jig_handler(info, cable_type, attached); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case MAX14577_MUIC_ADC_GROUND: | |
| case MAX14577_MUIC_ADC_SEND_END_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S1_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S2_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S3_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S4_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S5_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S6_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S7_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S8_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S9_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S10_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S11_BUTTON: | |
| case MAX14577_MUIC_ADC_REMOTE_S12_BUTTON: | |
| case MAX14577_MUIC_ADC_RESERVED_ACC_1: | |
| case MAX14577_MUIC_ADC_RESERVED_ACC_2: | |
| case MAX14577_MUIC_ADC_RESERVED_ACC_3: | |
| case MAX14577_MUIC_ADC_RESERVED_ACC_4: | |
| case MAX14577_MUIC_ADC_RESERVED_ACC_5: | |
| case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2: | |
| case MAX14577_MUIC_ADC_PHONE_POWERED_DEV: | |
| case MAX14577_MUIC_ADC_TTY_CONVERTER: | |
| case MAX14577_MUIC_ADC_UART_CABLE: | |
| case MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG: | |
| case MAX14577_MUIC_ADC_AV_CABLE_NOLOAD: | |
| case MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG: | |
| case MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON: | |
| case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1: | |
| /* | |
| * This accessory isn't used in general case if it is specially | |
| * needed to detect additional accessory, should implement | |
| * proper operation when this accessory is attached/detached. | |
| */ | |
| dev_info(info->dev, | |
| "accessory is %s but it isn't used (adc:0x%x)\n", | |
| attached ? "attached" : "detached", cable_type); | |
| return -EAGAIN; | |
| default: | |
| dev_err(info->dev, | |
| "failed to detect %s accessory (adc:0x%x)\n", | |
| attached ? "attached" : "detached", cable_type); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int max14577_muic_chg_handler(struct max14577_muic_info *info) | |
| { | |
| int chg_type; | |
| bool attached; | |
| int ret = 0; | |
| chg_type = max14577_muic_get_cable_type(info, | |
| MAX14577_CABLE_GROUP_CHG, &attached); | |
| dev_dbg(info->dev, | |
| "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", | |
| attached ? "attached" : "detached", | |
| chg_type, info->prev_chg_type); | |
| switch (chg_type) { | |
| case MAX14577_CHARGER_TYPE_USB: | |
| /* PATH:AP_USB */ | |
| ret = max14577_muic_set_path(info, info->path_usb, attached); | |
| if (ret < 0) | |
| return ret; | |
| extcon_set_state_sync(info->edev, EXTCON_USB, attached); | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, | |
| attached); | |
| break; | |
| case MAX14577_CHARGER_TYPE_DEDICATED_CHG: | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, | |
| attached); | |
| break; | |
| case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT: | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, | |
| attached); | |
| break; | |
| case MAX14577_CHARGER_TYPE_SPECIAL_500MA: | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, | |
| attached); | |
| break; | |
| case MAX14577_CHARGER_TYPE_SPECIAL_1A: | |
| extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, | |
| attached); | |
| break; | |
| case MAX14577_CHARGER_TYPE_NONE: | |
| case MAX14577_CHARGER_TYPE_DEAD_BATTERY: | |
| break; | |
| default: | |
| dev_err(info->dev, | |
| "failed to detect %s accessory (chg_type:0x%x)\n", | |
| attached ? "attached" : "detached", chg_type); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void max14577_muic_irq_work(struct work_struct *work) | |
| { | |
| struct max14577_muic_info *info = container_of(work, | |
| struct max14577_muic_info, irq_work); | |
| int ret = 0; | |
| if (!info->edev) | |
| return; | |
| mutex_lock(&info->mutex); | |
| ret = max14577_bulk_read(info->max14577->regmap, | |
| MAX14577_MUIC_REG_STATUS1, info->status, 2); | |
| if (ret) { | |
| dev_err(info->dev, "failed to read MUIC register\n"); | |
| mutex_unlock(&info->mutex); | |
| return; | |
| } | |
| if (info->irq_adc) { | |
| ret = max14577_muic_adc_handler(info); | |
| info->irq_adc = false; | |
| } | |
| if (info->irq_chg) { | |
| ret = max14577_muic_chg_handler(info); | |
| info->irq_chg = false; | |
| } | |
| if (ret < 0) | |
| dev_err(info->dev, "failed to handle MUIC interrupt\n"); | |
| mutex_unlock(&info->mutex); | |
| } | |
| /* | |
| * Sets irq_adc or irq_chg in max14577_muic_info and returns 1. | |
| * Returns 0 if irq_type does not match registered IRQ for this device type. | |
| */ | |
| static int max14577_parse_irq(struct max14577_muic_info *info, int irq_type) | |
| { | |
| switch (irq_type) { | |
| case MAX14577_IRQ_INT1_ADC: | |
| case MAX14577_IRQ_INT1_ADCLOW: | |
| case MAX14577_IRQ_INT1_ADCERR: | |
| /* | |
| * Handle all of accessory except for | |
| * type of charger accessory. | |
| */ | |
| info->irq_adc = true; | |
| return 1; | |
| case MAX14577_IRQ_INT2_CHGTYP: | |
| case MAX14577_IRQ_INT2_CHGDETRUN: | |
| case MAX14577_IRQ_INT2_DCDTMR: | |
| case MAX14577_IRQ_INT2_DBCHG: | |
| case MAX14577_IRQ_INT2_VBVOLT: | |
| /* Handle charger accessory */ | |
| info->irq_chg = true; | |
| return 1; | |
| default: | |
| return 0; | |
| } | |
| } | |
| /* | |
| * Sets irq_adc or irq_chg in max14577_muic_info and returns 1. | |
| * Returns 0 if irq_type does not match registered IRQ for this device type. | |
| */ | |
| static int max77836_parse_irq(struct max14577_muic_info *info, int irq_type) | |
| { | |
| /* First check common max14577 interrupts */ | |
| if (max14577_parse_irq(info, irq_type)) | |
| return 1; | |
| switch (irq_type) { | |
| case MAX77836_IRQ_INT1_ADC1K: | |
| info->irq_adc = true; | |
| return 1; | |
| case MAX77836_IRQ_INT2_VIDRM: | |
| /* Handle charger accessory */ | |
| info->irq_chg = true; | |
| return 1; | |
| default: | |
| return 0; | |
| } | |
| } | |
| static irqreturn_t max14577_muic_irq_handler(int irq, void *data) | |
| { | |
| struct max14577_muic_info *info = data; | |
| int i, irq_type = -1; | |
| bool irq_parsed; | |
| /* | |
| * We may be called multiple times for different nested IRQ-s. | |
| * Including changes in INT1_ADC and INT2_CGHTYP at once. | |
| * However we only need to know whether it was ADC, charger | |
| * or both interrupts so decode IRQ and turn on proper flags. | |
| */ | |
| for (i = 0; i < info->muic_irqs_num; i++) | |
| if (irq == info->muic_irqs[i].virq) | |
| irq_type = info->muic_irqs[i].irq; | |
| switch (info->max14577->dev_type) { | |
| case MAXIM_DEVICE_TYPE_MAX77836: | |
| irq_parsed = max77836_parse_irq(info, irq_type); | |
| break; | |
| case MAXIM_DEVICE_TYPE_MAX14577: | |
| default: | |
| irq_parsed = max14577_parse_irq(info, irq_type); | |
| break; | |
| } | |
| if (!irq_parsed) { | |
| dev_err(info->dev, "muic interrupt: irq %d occurred, skipped\n", | |
| irq_type); | |
| return IRQ_HANDLED; | |
| } | |
| schedule_work(&info->irq_work); | |
| return IRQ_HANDLED; | |
| } | |
| static int max14577_muic_detect_accessory(struct max14577_muic_info *info) | |
| { | |
| int ret = 0; | |
| int adc; | |
| int chg_type; | |
| bool attached; | |
| mutex_lock(&info->mutex); | |
| /* Read STATUSx register to detect accessory */ | |
| ret = max14577_bulk_read(info->max14577->regmap, | |
| MAX14577_MUIC_REG_STATUS1, info->status, 2); | |
| if (ret) { | |
| dev_err(info->dev, "failed to read MUIC register\n"); | |
| mutex_unlock(&info->mutex); | |
| return ret; | |
| } | |
| adc = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC, | |
| &attached); | |
| if (attached && adc != MAX14577_MUIC_ADC_OPEN) { | |
| ret = max14577_muic_adc_handler(info); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot detect accessory\n"); | |
| mutex_unlock(&info->mutex); | |
| return ret; | |
| } | |
| } | |
| chg_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_CHG, | |
| &attached); | |
| if (attached && chg_type != MAX14577_CHARGER_TYPE_NONE) { | |
| ret = max14577_muic_chg_handler(info); | |
| if (ret < 0) { | |
| dev_err(info->dev, "Cannot detect charger accessory\n"); | |
| mutex_unlock(&info->mutex); | |
| return ret; | |
| } | |
| } | |
| mutex_unlock(&info->mutex); | |
| return 0; | |
| } | |
| static void max14577_muic_detect_cable_wq(struct work_struct *work) | |
| { | |
| struct max14577_muic_info *info = container_of(to_delayed_work(work), | |
| struct max14577_muic_info, wq_detcable); | |
| max14577_muic_detect_accessory(info); | |
| } | |
| static int max14577_muic_probe(struct platform_device *pdev) | |
| { | |
| struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent); | |
| struct max14577_muic_info *info; | |
| int delay_jiffies; | |
| int cable_type; | |
| bool attached; | |
| int ret; | |
| int i; | |
| u8 id; | |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| info->dev = &pdev->dev; | |
| info->max14577 = max14577; | |
| platform_set_drvdata(pdev, info); | |
| mutex_init(&info->mutex); | |
| ret = devm_work_autocancel(&pdev->dev, &info->irq_work, | |
| max14577_muic_irq_work); | |
| if (ret) | |
| return ret; | |
| switch (max14577->dev_type) { | |
| case MAXIM_DEVICE_TYPE_MAX77836: | |
| info->muic_irqs = max77836_muic_irqs; | |
| info->muic_irqs_num = ARRAY_SIZE(max77836_muic_irqs); | |
| break; | |
| case MAXIM_DEVICE_TYPE_MAX14577: | |
| default: | |
| info->muic_irqs = max14577_muic_irqs; | |
| info->muic_irqs_num = ARRAY_SIZE(max14577_muic_irqs); | |
| } | |
| /* Support irq domain for max14577 MUIC device */ | |
| for (i = 0; i < info->muic_irqs_num; i++) { | |
| struct max14577_muic_irq *muic_irq = &info->muic_irqs[i]; | |
| int virq = 0; | |
| virq = regmap_irq_get_virq(max14577->irq_data, muic_irq->irq); | |
| if (virq <= 0) | |
| return -EINVAL; | |
| muic_irq->virq = virq; | |
| ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, | |
| max14577_muic_irq_handler, | |
| IRQF_NO_SUSPEND, | |
| muic_irq->name, info); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "failed: irq request (IRQ: %d, error :%d)\n", | |
| muic_irq->irq, ret); | |
| return ret; | |
| } | |
| } | |
| /* Initialize extcon device */ | |
| info->edev = devm_extcon_dev_allocate(&pdev->dev, | |
| max14577_extcon_cable); | |
| if (IS_ERR(info->edev)) { | |
| dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); | |
| return PTR_ERR(info->edev); | |
| } | |
| ret = devm_extcon_dev_register(&pdev->dev, info->edev); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to register extcon device\n"); | |
| return ret; | |
| } | |
| /* Default h/w line path */ | |
| info->path_usb = CTRL1_SW_USB; | |
| info->path_uart = CTRL1_SW_UART; | |
| delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); | |
| /* Set initial path for UART when JIG is connected to get serial logs */ | |
| ret = max14577_bulk_read(info->max14577->regmap, | |
| MAX14577_MUIC_REG_STATUS1, info->status, 2); | |
| if (ret) { | |
| dev_err(info->dev, "Cannot read STATUS registers\n"); | |
| return ret; | |
| } | |
| cable_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC, | |
| &attached); | |
| if (attached && cable_type == MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF) | |
| max14577_muic_set_path(info, info->path_uart, true); | |
| /* Check revision number of MUIC device*/ | |
| ret = max14577_read_reg(info->max14577->regmap, | |
| MAX14577_REG_DEVICEID, &id); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed to read revision number\n"); | |
| return ret; | |
| } | |
| dev_info(info->dev, "device ID : 0x%x\n", id); | |
| /* Set ADC debounce time */ | |
| max14577_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); | |
| /* | |
| * Detect accessory after completing the initialization of platform | |
| * | |
| * - Use delayed workqueue to detect cable state and then | |
| * notify cable state to notifiee/platform through uevent. | |
| * After completing the booting of platform, the extcon provider | |
| * driver should notify cable state to upper layer. | |
| */ | |
| INIT_DELAYED_WORK(&info->wq_detcable, max14577_muic_detect_cable_wq); | |
| queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, | |
| delay_jiffies); | |
| return ret; | |
| } | |
| static const struct platform_device_id max14577_muic_id[] = { | |
| { "max14577-muic", MAXIM_DEVICE_TYPE_MAX14577, }, | |
| { "max77836-muic", MAXIM_DEVICE_TYPE_MAX77836, }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(platform, max14577_muic_id); | |
| static const struct of_device_id of_max14577_muic_dt_match[] = { | |
| { .compatible = "maxim,max14577-muic", | |
| .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, }, | |
| { .compatible = "maxim,max77836-muic", | |
| .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, of_max14577_muic_dt_match); | |
| static struct platform_driver max14577_muic_driver = { | |
| .driver = { | |
| .name = "max14577-muic", | |
| .of_match_table = of_max14577_muic_dt_match, | |
| }, | |
| .probe = max14577_muic_probe, | |
| .id_table = max14577_muic_id, | |
| }; | |
| module_platform_driver(max14577_muic_driver); | |
| MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver"); | |
| MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:extcon-max14577"); |