| // SPDX-License-Identifier: GPL-2.0-only | |
| #include <linux/aperture.h> | |
| #include <linux/clk.h> | |
| #include <linux/minmax.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_clk.h> | |
| #include <linux/of_reserved_mem.h> | |
| #include <linux/overflow.h> | |
| #include <linux/platform_data/simplefb.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm.h> | |
| #include <linux/pm_domain.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <drm/clients/drm_client_setup.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_state_helper.h> | |
| #include <drm/drm_connector.h> | |
| #include <drm/drm_damage_helper.h> | |
| #include <drm/drm_device.h> | |
| #include <drm/drm_drv.h> | |
| #include <drm/drm_fbdev_shmem.h> | |
| #include <drm/drm_framebuffer.h> | |
| #include <drm/drm_gem_atomic_helper.h> | |
| #include <drm/drm_gem_framebuffer_helper.h> | |
| #include <drm/drm_gem_shmem_helper.h> | |
| #include <drm/drm_managed.h> | |
| #include <drm/drm_modeset_helper.h> | |
| #include <drm/drm_modeset_helper_vtables.h> | |
| #include <drm/drm_of.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include "drm_sysfb_helper.h" | |
| #define DRIVER_NAME "simpledrm" | |
| #define DRIVER_DESC "DRM driver for simple-framebuffer platform devices" | |
| #define DRIVER_MAJOR 1 | |
| #define DRIVER_MINOR 0 | |
| /* | |
| * Helpers for simplefb | |
| */ | |
| static const struct drm_format_info * | |
| simplefb_get_validated_format(struct drm_device *dev, const char *format_name) | |
| { | |
| static const struct simplefb_format formats[] = SIMPLEFB_FORMATS; | |
| const struct simplefb_format *fmt = formats; | |
| const struct simplefb_format *end = fmt + ARRAY_SIZE(formats); | |
| const struct drm_format_info *info; | |
| if (!format_name) { | |
| drm_err(dev, "simplefb: missing framebuffer format\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| while (fmt < end) { | |
| if (!strcmp(format_name, fmt->name)) { | |
| info = drm_format_info(fmt->fourcc); | |
| if (!info) | |
| return ERR_PTR(-EINVAL); | |
| return info; | |
| } | |
| ++fmt; | |
| } | |
| drm_err(dev, "simplefb: unknown framebuffer format %s\n", | |
| format_name); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| static int | |
| simplefb_get_width_pd(struct drm_device *dev, | |
| const struct simplefb_platform_data *pd) | |
| { | |
| return drm_sysfb_get_validated_int0(dev, "width", pd->width, U16_MAX); | |
| } | |
| static int | |
| simplefb_get_height_pd(struct drm_device *dev, | |
| const struct simplefb_platform_data *pd) | |
| { | |
| return drm_sysfb_get_validated_int0(dev, "height", pd->height, U16_MAX); | |
| } | |
| static int | |
| simplefb_get_stride_pd(struct drm_device *dev, | |
| const struct simplefb_platform_data *pd) | |
| { | |
| return drm_sysfb_get_validated_int(dev, "stride", pd->stride, INT_MAX); | |
| } | |
| static const struct drm_format_info * | |
| simplefb_get_format_pd(struct drm_device *dev, | |
| const struct simplefb_platform_data *pd) | |
| { | |
| return simplefb_get_validated_format(dev, pd->format); | |
| } | |
| static int | |
| simplefb_read_u32_of(struct drm_device *dev, struct device_node *of_node, | |
| const char *name, u32 *value) | |
| { | |
| int ret = of_property_read_u32(of_node, name, value); | |
| if (ret) | |
| drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n", | |
| name, ret); | |
| return ret; | |
| } | |
| static int | |
| simplefb_read_string_of(struct drm_device *dev, struct device_node *of_node, | |
| const char *name, const char **value) | |
| { | |
| int ret = of_property_read_string(of_node, name, value); | |
| if (ret) | |
| drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n", | |
| name, ret); | |
| return ret; | |
| } | |
| static int | |
| simplefb_get_width_of(struct drm_device *dev, struct device_node *of_node) | |
| { | |
| u32 width; | |
| int ret = simplefb_read_u32_of(dev, of_node, "width", &width); | |
| if (ret) | |
| return ret; | |
| return drm_sysfb_get_validated_int0(dev, "width", width, U16_MAX); | |
| } | |
| static int | |
| simplefb_get_height_of(struct drm_device *dev, struct device_node *of_node) | |
| { | |
| u32 height; | |
| int ret = simplefb_read_u32_of(dev, of_node, "height", &height); | |
| if (ret) | |
| return ret; | |
| return drm_sysfb_get_validated_int0(dev, "height", height, U16_MAX); | |
| } | |
| static int | |
| simplefb_get_stride_of(struct drm_device *dev, struct device_node *of_node) | |
| { | |
| u32 stride; | |
| int ret = simplefb_read_u32_of(dev, of_node, "stride", &stride); | |
| if (ret) | |
| return ret; | |
| return drm_sysfb_get_validated_int(dev, "stride", stride, INT_MAX); | |
| } | |
| static const struct drm_format_info * | |
| simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node) | |
| { | |
| const char *format; | |
| int ret = simplefb_read_string_of(dev, of_node, "format", &format); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| return simplefb_get_validated_format(dev, format); | |
| } | |
| static struct resource * | |
| simplefb_get_memory_of(struct drm_device *dev, struct device_node *of_node) | |
| { | |
| struct resource r, *res; | |
| int err; | |
| err = of_reserved_mem_region_to_resource(of_node, 0, &r); | |
| if (err) | |
| return NULL; | |
| res = devm_kmemdup(dev->dev, &r, sizeof(r), GFP_KERNEL); | |
| if (!res) | |
| return ERR_PTR(-ENOMEM); | |
| if (of_property_present(of_node, "reg")) | |
| drm_warn(dev, "preferring \"memory-region\" over \"reg\" property\n"); | |
| return res; | |
| } | |
| static int __simplefb_get_panel_size_mm_of(struct drm_device *dev, | |
| struct device_node *of_panel_node, | |
| const char *name) | |
| { | |
| int ret; | |
| u32 value; | |
| ret = of_property_read_u32(of_panel_node, name, &value); | |
| if (ret) { | |
| drm_dbg(dev, "simplefb: cannot parse panel %s: error %d\n", | |
| name, ret); | |
| return ret; | |
| } else if (value > U16_MAX) { | |
| drm_dbg(dev, "simplefb: panel %s of %u exceeds maximum value\n", | |
| name, value); | |
| return -EINVAL; | |
| } | |
| return value; | |
| } | |
| static int simplefb_get_panel_width_mm_of(struct drm_device *dev, | |
| struct device_node *of_panel_node) | |
| { | |
| return __simplefb_get_panel_size_mm_of(dev, of_panel_node, "width-mm"); | |
| } | |
| static int simplefb_get_panel_height_mm_of(struct drm_device *dev, | |
| struct device_node *of_panel_node) | |
| { | |
| return __simplefb_get_panel_size_mm_of(dev, of_panel_node, "height-mm"); | |
| } | |
| /* | |
| * Simple Framebuffer device | |
| */ | |
| struct simpledrm_device { | |
| struct drm_sysfb_device sysfb; | |
| /* clocks */ | |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK | |
| unsigned int clk_count; | |
| struct clk **clks; | |
| #endif | |
| /* regulators */ | |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR | |
| unsigned int regulator_count; | |
| struct regulator **regulators; | |
| #endif | |
| /* power-domains */ | |
| #if defined CONFIG_OF && defined CONFIG_PM_GENERIC_DOMAINS | |
| int pwr_dom_count; | |
| struct device **pwr_dom_devs; | |
| struct device_link **pwr_dom_links; | |
| #endif | |
| /* modesetting */ | |
| u32 formats[DRM_SYSFB_PLANE_NFORMATS(1)]; | |
| struct drm_plane primary_plane; | |
| struct drm_crtc crtc; | |
| struct drm_encoder encoder; | |
| struct drm_connector connector; | |
| }; | |
| /* | |
| * Hardware | |
| */ | |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK | |
| /* | |
| * Clock handling code. | |
| * | |
| * Here we handle the clocks property of our "simple-framebuffer" dt node. | |
| * This is necessary so that we can make sure that any clocks needed by | |
| * the display engine that the bootloader set up for us (and for which it | |
| * provided a simplefb dt node), stay up, for the life of the simplefb | |
| * driver. | |
| * | |
| * When the driver unloads, we cleanly disable, and then release the clocks. | |
| * | |
| * We only complain about errors here, no action is taken as the most likely | |
| * error can only happen due to a mismatch between the bootloader which set | |
| * up simplefb, and the clock definitions in the device tree. Chances are | |
| * that there are no adverse effects, and if there are, a clean teardown of | |
| * the fb probe will not help us much either. So just complain and carry on, | |
| * and hope that the user actually gets a working fb at the end of things. | |
| */ | |
| static void simpledrm_device_release_clocks(void *res) | |
| { | |
| struct simpledrm_device *sdev = res; | |
| unsigned int i; | |
| for (i = 0; i < sdev->clk_count; ++i) { | |
| if (sdev->clks[i]) { | |
| clk_disable_unprepare(sdev->clks[i]); | |
| clk_put(sdev->clks[i]); | |
| } | |
| } | |
| } | |
| static int simpledrm_device_init_clocks(struct simpledrm_device *sdev) | |
| { | |
| struct drm_device *dev = &sdev->sysfb.dev; | |
| struct platform_device *pdev = to_platform_device(dev->dev); | |
| struct device_node *of_node = pdev->dev.of_node; | |
| struct clk *clock; | |
| unsigned int i; | |
| int ret; | |
| if (dev_get_platdata(&pdev->dev) || !of_node) | |
| return 0; | |
| sdev->clk_count = of_clk_get_parent_count(of_node); | |
| if (!sdev->clk_count) | |
| return 0; | |
| sdev->clks = drmm_kzalloc(dev, sdev->clk_count * sizeof(sdev->clks[0]), | |
| GFP_KERNEL); | |
| if (!sdev->clks) | |
| return -ENOMEM; | |
| for (i = 0; i < sdev->clk_count; ++i) { | |
| clock = of_clk_get(of_node, i); | |
| if (IS_ERR(clock)) { | |
| ret = PTR_ERR(clock); | |
| if (ret == -EPROBE_DEFER) | |
| goto err; | |
| drm_err(dev, "clock %u not found: %d\n", i, ret); | |
| continue; | |
| } | |
| ret = clk_prepare_enable(clock); | |
| if (ret) { | |
| drm_err(dev, "failed to enable clock %u: %d\n", | |
| i, ret); | |
| clk_put(clock); | |
| continue; | |
| } | |
| sdev->clks[i] = clock; | |
| } | |
| return devm_add_action_or_reset(&pdev->dev, | |
| simpledrm_device_release_clocks, | |
| sdev); | |
| err: | |
| while (i) { | |
| --i; | |
| if (sdev->clks[i]) { | |
| clk_disable_unprepare(sdev->clks[i]); | |
| clk_put(sdev->clks[i]); | |
| } | |
| } | |
| return ret; | |
| } | |
| #else | |
| static int simpledrm_device_init_clocks(struct simpledrm_device *sdev) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR | |
| #define SUPPLY_SUFFIX "-supply" | |
| /* | |
| * Regulator handling code. | |
| * | |
| * Here we handle the num-supplies and vin*-supply properties of our | |
| * "simple-framebuffer" dt node. This is necessary so that we can make sure | |
| * that any regulators needed by the display hardware that the bootloader | |
| * set up for us (and for which it provided a simplefb dt node), stay up, | |
| * for the life of the simplefb driver. | |
| * | |
| * When the driver unloads, we cleanly disable, and then release the | |
| * regulators. | |
| * | |
| * We only complain about errors here, no action is taken as the most likely | |
| * error can only happen due to a mismatch between the bootloader which set | |
| * up simplefb, and the regulator definitions in the device tree. Chances are | |
| * that there are no adverse effects, and if there are, a clean teardown of | |
| * the fb probe will not help us much either. So just complain and carry on, | |
| * and hope that the user actually gets a working fb at the end of things. | |
| */ | |
| static void simpledrm_device_release_regulators(void *res) | |
| { | |
| struct simpledrm_device *sdev = res; | |
| unsigned int i; | |
| for (i = 0; i < sdev->regulator_count; ++i) { | |
| if (sdev->regulators[i]) { | |
| regulator_disable(sdev->regulators[i]); | |
| regulator_put(sdev->regulators[i]); | |
| } | |
| } | |
| } | |
| static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) | |
| { | |
| struct drm_device *dev = &sdev->sysfb.dev; | |
| struct platform_device *pdev = to_platform_device(dev->dev); | |
| struct device_node *of_node = pdev->dev.of_node; | |
| struct property *prop; | |
| struct regulator *regulator; | |
| const char *p; | |
| unsigned int count = 0, i = 0; | |
| int ret; | |
| if (dev_get_platdata(&pdev->dev) || !of_node) | |
| return 0; | |
| /* Count the number of regulator supplies */ | |
| for_each_property_of_node(of_node, prop) { | |
| p = strstr(prop->name, SUPPLY_SUFFIX); | |
| if (p && p != prop->name) | |
| ++count; | |
| } | |
| if (!count) | |
| return 0; | |
| sdev->regulators = drmm_kzalloc(dev, | |
| count * sizeof(sdev->regulators[0]), | |
| GFP_KERNEL); | |
| if (!sdev->regulators) | |
| return -ENOMEM; | |
| for_each_property_of_node(of_node, prop) { | |
| char name[32]; /* 32 is max size of property name */ | |
| size_t len; | |
| p = strstr(prop->name, SUPPLY_SUFFIX); | |
| if (!p || p == prop->name) | |
| continue; | |
| len = strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1; | |
| strscpy(name, prop->name, min(sizeof(name), len)); | |
| regulator = regulator_get_optional(&pdev->dev, name); | |
| if (IS_ERR(regulator)) { | |
| ret = PTR_ERR(regulator); | |
| if (ret == -EPROBE_DEFER) | |
| goto err; | |
| drm_err(dev, "regulator %s not found: %d\n", | |
| name, ret); | |
| continue; | |
| } | |
| ret = regulator_enable(regulator); | |
| if (ret) { | |
| drm_err(dev, "failed to enable regulator %u: %d\n", | |
| i, ret); | |
| regulator_put(regulator); | |
| continue; | |
| } | |
| sdev->regulators[i++] = regulator; | |
| } | |
| sdev->regulator_count = i; | |
| return devm_add_action_or_reset(&pdev->dev, | |
| simpledrm_device_release_regulators, | |
| sdev); | |
| err: | |
| while (i) { | |
| --i; | |
| if (sdev->regulators[i]) { | |
| regulator_disable(sdev->regulators[i]); | |
| regulator_put(sdev->regulators[i]); | |
| } | |
| } | |
| return ret; | |
| } | |
| #else | |
| static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| #if defined CONFIG_OF && defined CONFIG_PM_GENERIC_DOMAINS | |
| /* | |
| * Generic power domain handling code. | |
| * | |
| * Here we handle the power-domains properties of our "simple-framebuffer" | |
| * dt node. This is only necessary if there is more than one power-domain. | |
| * A single power-domains is handled automatically by the driver core. Multiple | |
| * power-domains have to be handled by drivers since the driver core can't know | |
| * the correct power sequencing. Power sequencing is not an issue for simpledrm | |
| * since the bootloader has put the power domains already in the correct state. | |
| * simpledrm has only to ensure they remain active for its lifetime. | |
| * | |
| * When the driver unloads, we detach from the power-domains. | |
| * | |
| * We only complain about errors here, no action is taken as the most likely | |
| * error can only happen due to a mismatch between the bootloader which set | |
| * up the "simple-framebuffer" dt node, and the PM domain providers in the | |
| * device tree. Chances are that there are no adverse effects, and if there are, | |
| * a clean teardown of the fb probe will not help us much either. So just | |
| * complain and carry on, and hope that the user actually gets a working fb at | |
| * the end of things. | |
| */ | |
| static void simpledrm_device_detach_genpd(void *res) | |
| { | |
| int i; | |
| struct simpledrm_device *sdev = res; | |
| if (sdev->pwr_dom_count <= 1) | |
| return; | |
| for (i = sdev->pwr_dom_count - 1; i >= 0; i--) { | |
| if (sdev->pwr_dom_links[i]) | |
| device_link_del(sdev->pwr_dom_links[i]); | |
| if (!IS_ERR_OR_NULL(sdev->pwr_dom_devs[i])) | |
| dev_pm_domain_detach(sdev->pwr_dom_devs[i], true); | |
| } | |
| } | |
| static int simpledrm_device_attach_genpd(struct simpledrm_device *sdev) | |
| { | |
| struct device *dev = sdev->sysfb.dev.dev; | |
| int i; | |
| sdev->pwr_dom_count = of_count_phandle_with_args(dev->of_node, "power-domains", | |
| "#power-domain-cells"); | |
| /* | |
| * Single power-domain devices are handled by driver core nothing to do | |
| * here. The same for device nodes without "power-domains" property. | |
| */ | |
| if (sdev->pwr_dom_count <= 1) | |
| return 0; | |
| sdev->pwr_dom_devs = devm_kcalloc(dev, sdev->pwr_dom_count, | |
| sizeof(*sdev->pwr_dom_devs), | |
| GFP_KERNEL); | |
| if (!sdev->pwr_dom_devs) | |
| return -ENOMEM; | |
| sdev->pwr_dom_links = devm_kcalloc(dev, sdev->pwr_dom_count, | |
| sizeof(*sdev->pwr_dom_links), | |
| GFP_KERNEL); | |
| if (!sdev->pwr_dom_links) | |
| return -ENOMEM; | |
| for (i = 0; i < sdev->pwr_dom_count; i++) { | |
| sdev->pwr_dom_devs[i] = dev_pm_domain_attach_by_id(dev, i); | |
| if (IS_ERR(sdev->pwr_dom_devs[i])) { | |
| int ret = PTR_ERR(sdev->pwr_dom_devs[i]); | |
| if (ret == -EPROBE_DEFER) { | |
| simpledrm_device_detach_genpd(sdev); | |
| return ret; | |
| } | |
| drm_warn(&sdev->sysfb.dev, | |
| "pm_domain_attach_by_id(%u) failed: %d\n", i, ret); | |
| continue; | |
| } | |
| sdev->pwr_dom_links[i] = device_link_add(dev, | |
| sdev->pwr_dom_devs[i], | |
| DL_FLAG_STATELESS | | |
| DL_FLAG_PM_RUNTIME | | |
| DL_FLAG_RPM_ACTIVE); | |
| if (!sdev->pwr_dom_links[i]) | |
| drm_warn(&sdev->sysfb.dev, "failed to link power-domain %d\n", i); | |
| } | |
| return devm_add_action_or_reset(dev, simpledrm_device_detach_genpd, sdev); | |
| } | |
| #else | |
| static int simpledrm_device_attach_genpd(struct simpledrm_device *sdev) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * Modesetting | |
| */ | |
| static const u64 simpledrm_primary_plane_format_modifiers[] = { | |
| DRM_SYSFB_PLANE_FORMAT_MODIFIERS, | |
| }; | |
| static const struct drm_plane_helper_funcs simpledrm_primary_plane_helper_funcs = { | |
| DRM_SYSFB_PLANE_HELPER_FUNCS, | |
| }; | |
| static const struct drm_plane_funcs simpledrm_primary_plane_funcs = { | |
| DRM_SYSFB_PLANE_FUNCS, | |
| .destroy = drm_plane_cleanup, | |
| }; | |
| static const struct drm_crtc_helper_funcs simpledrm_crtc_helper_funcs = { | |
| DRM_SYSFB_CRTC_HELPER_FUNCS, | |
| }; | |
| static const struct drm_crtc_funcs simpledrm_crtc_funcs = { | |
| DRM_SYSFB_CRTC_FUNCS, | |
| .destroy = drm_crtc_cleanup, | |
| }; | |
| static const struct drm_encoder_funcs simpledrm_encoder_funcs = { | |
| .destroy = drm_encoder_cleanup, | |
| }; | |
| static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs = { | |
| DRM_SYSFB_CONNECTOR_HELPER_FUNCS, | |
| }; | |
| static const struct drm_connector_funcs simpledrm_connector_funcs = { | |
| DRM_SYSFB_CONNECTOR_FUNCS, | |
| .destroy = drm_connector_cleanup, | |
| }; | |
| static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = { | |
| DRM_SYSFB_MODE_CONFIG_FUNCS, | |
| }; | |
| /* | |
| * Init / Cleanup | |
| */ | |
| static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, | |
| struct platform_device *pdev) | |
| { | |
| const struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev); | |
| struct device_node *of_node = pdev->dev.of_node; | |
| struct simpledrm_device *sdev; | |
| struct drm_sysfb_device *sysfb; | |
| struct drm_device *dev; | |
| int width, height, stride; | |
| u16 width_mm = 0, height_mm = 0; | |
| struct device_node *panel_node; | |
| enum drm_panel_orientation orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; | |
| const struct drm_format_info *format; | |
| u64 size; | |
| struct resource *res, *mem = NULL; | |
| struct drm_plane *primary_plane; | |
| struct drm_crtc *crtc; | |
| struct drm_encoder *encoder; | |
| struct drm_connector *connector; | |
| unsigned long max_width, max_height; | |
| size_t nformats; | |
| int ret; | |
| sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device, sysfb.dev); | |
| if (IS_ERR(sdev)) | |
| return ERR_CAST(sdev); | |
| sysfb = &sdev->sysfb; | |
| dev = &sysfb->dev; | |
| platform_set_drvdata(pdev, sdev); | |
| /* | |
| * Hardware settings | |
| */ | |
| ret = simpledrm_device_init_clocks(sdev); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = simpledrm_device_init_regulators(sdev); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = simpledrm_device_attach_genpd(sdev); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| if (pd) { | |
| width = simplefb_get_width_pd(dev, pd); | |
| if (width < 0) | |
| return ERR_PTR(width); | |
| height = simplefb_get_height_pd(dev, pd); | |
| if (height < 0) | |
| return ERR_PTR(height); | |
| stride = simplefb_get_stride_pd(dev, pd); | |
| if (stride < 0) | |
| return ERR_PTR(stride); | |
| format = simplefb_get_format_pd(dev, pd); | |
| if (IS_ERR(format)) | |
| return ERR_CAST(format); | |
| } else if (of_node) { | |
| width = simplefb_get_width_of(dev, of_node); | |
| if (width < 0) | |
| return ERR_PTR(width); | |
| height = simplefb_get_height_of(dev, of_node); | |
| if (height < 0) | |
| return ERR_PTR(height); | |
| stride = simplefb_get_stride_of(dev, of_node); | |
| if (stride < 0) | |
| return ERR_PTR(stride); | |
| format = simplefb_get_format_of(dev, of_node); | |
| if (IS_ERR(format)) | |
| return ERR_CAST(format); | |
| mem = simplefb_get_memory_of(dev, of_node); | |
| if (IS_ERR(mem)) | |
| return ERR_CAST(mem); | |
| panel_node = of_parse_phandle(of_node, "panel", 0); | |
| if (panel_node) { | |
| /* | |
| * Ignore errors from parsing the physical panel | |
| * size. Using the pre-initialized sizes of 0 will | |
| * make drm_sysfb_mode() calculate a default physical | |
| * size based on a resolution of 96 dpi. | |
| */ | |
| ret = simplefb_get_panel_width_mm_of(dev, panel_node); | |
| if (ret > 0) | |
| width_mm = ret; | |
| ret = simplefb_get_panel_height_mm_of(dev, panel_node); | |
| if (ret > 0) | |
| height_mm = ret; | |
| /* | |
| * Ignore errors from parsing the panel orientation. With | |
| * the orientation initialized to UNKNOWN, the connector | |
| * helpers will do the right thing. | |
| */ | |
| drm_of_get_panel_orientation(panel_node, &orientation); | |
| of_node_put(panel_node); | |
| } | |
| } else { | |
| drm_err(dev, "no simplefb configuration found\n"); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| if (!stride) { | |
| u64 pitch = drm_format_info_min_pitch(format, 0, width); | |
| if (drm_WARN_ON(dev, !pitch)) { | |
| return ERR_PTR(-EINVAL); /* driver bug */ | |
| } else if (pitch > INT_MAX) { | |
| drm_warn(dev, "stride of %llu exceeds maximum\n", pitch); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| stride = pitch; | |
| } | |
| if (check_mul_overflow(height, stride, &size)) { | |
| drm_err(dev, "framebuffer size exceeds maximum\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| if (ALIGN(size, PAGE_SIZE) < PAGE_SIZE) { | |
| drm_err(dev, "page-aligned framebuffer exceeds maximum\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| sysfb->fb_mode = drm_sysfb_mode(width, height, width_mm, height_mm); | |
| sysfb->fb_format = format; | |
| sysfb->fb_pitch = stride; | |
| drm_dbg(dev, "display mode={" DRM_MODE_FMT "}\n", DRM_MODE_ARG(&sysfb->fb_mode)); | |
| drm_dbg(dev, "framebuffer format=%p4cc, size=%dx%d, stride=%d byte\n", | |
| &format->format, width, height, stride); | |
| /* | |
| * Memory management | |
| */ | |
| if (mem) { | |
| void *screen_base; | |
| ret = devm_aperture_acquire_for_platform_device(pdev, mem->start, | |
| resource_size(mem)); | |
| if (ret) { | |
| drm_err(dev, "could not acquire memory range %pr: %d\n", mem, ret); | |
| return ERR_PTR(ret); | |
| } | |
| drm_dbg(dev, "using system memory framebuffer at %pr\n", mem); | |
| if (size > resource_size(mem)) { | |
| drm_err(dev, | |
| "framebuffer size of %llu exceeds memory range %pr\n", | |
| size, mem); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| screen_base = devm_memremap(dev->dev, mem->start, resource_size(mem), MEMREMAP_WC); | |
| if (IS_ERR(screen_base)) | |
| return screen_base; | |
| iosys_map_set_vaddr(&sysfb->fb_addr, screen_base); | |
| } else { | |
| void __iomem *screen_base; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) | |
| return ERR_PTR(-EINVAL); | |
| ret = devm_aperture_acquire_for_platform_device(pdev, res->start, | |
| resource_size(res)); | |
| if (ret) { | |
| drm_err(dev, "could not acquire memory range %pr: %d\n", res, ret); | |
| return ERR_PTR(ret); | |
| } | |
| drm_dbg(dev, "using I/O memory framebuffer at %pr\n", res); | |
| mem = devm_request_mem_region(&pdev->dev, res->start, resource_size(res), | |
| drv->name); | |
| if (!mem) { | |
| /* | |
| * We cannot make this fatal. Sometimes this comes from magic | |
| * spaces our resource handlers simply don't know about. Use | |
| * the I/O-memory resource as-is and try to map that instead. | |
| */ | |
| drm_warn(dev, "could not acquire memory region %pr\n", res); | |
| mem = res; | |
| } | |
| if (size > resource_size(mem)) { | |
| drm_err(dev, | |
| "framebuffer size of %llu exceeds memory range %pr\n", | |
| size, mem); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| screen_base = devm_ioremap_wc(&pdev->dev, mem->start, resource_size(mem)); | |
| if (!screen_base) | |
| return ERR_PTR(-ENOMEM); | |
| iosys_map_set_vaddr_iomem(&sysfb->fb_addr, screen_base); | |
| } | |
| /* | |
| * Modesetting | |
| */ | |
| ret = drmm_mode_config_init(dev); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| max_width = max_t(unsigned long, width, DRM_SHADOW_PLANE_MAX_WIDTH); | |
| max_height = max_t(unsigned long, height, DRM_SHADOW_PLANE_MAX_HEIGHT); | |
| dev->mode_config.min_width = width; | |
| dev->mode_config.max_width = max_width; | |
| dev->mode_config.min_height = height; | |
| dev->mode_config.max_height = max_height; | |
| dev->mode_config.preferred_depth = format->depth; | |
| dev->mode_config.funcs = &simpledrm_mode_config_funcs; | |
| /* Primary plane */ | |
| nformats = drm_sysfb_build_fourcc_list(dev, &format->format, 1, | |
| sdev->formats, ARRAY_SIZE(sdev->formats)); | |
| primary_plane = &sdev->primary_plane; | |
| ret = drm_universal_plane_init(dev, primary_plane, 0, &simpledrm_primary_plane_funcs, | |
| sdev->formats, nformats, | |
| simpledrm_primary_plane_format_modifiers, | |
| DRM_PLANE_TYPE_PRIMARY, NULL); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| drm_plane_helper_add(primary_plane, &simpledrm_primary_plane_helper_funcs); | |
| drm_plane_enable_fb_damage_clips(primary_plane); | |
| /* CRTC */ | |
| crtc = &sdev->crtc; | |
| ret = drm_crtc_init_with_planes(dev, crtc, primary_plane, NULL, | |
| &simpledrm_crtc_funcs, NULL); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| drm_crtc_helper_add(crtc, &simpledrm_crtc_helper_funcs); | |
| /* Encoder */ | |
| encoder = &sdev->encoder; | |
| ret = drm_encoder_init(dev, encoder, &simpledrm_encoder_funcs, | |
| DRM_MODE_ENCODER_NONE, NULL); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| encoder->possible_crtcs = drm_crtc_mask(crtc); | |
| /* Connector */ | |
| connector = &sdev->connector; | |
| ret = drm_connector_init(dev, connector, &simpledrm_connector_funcs, | |
| DRM_MODE_CONNECTOR_Unknown); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| drm_connector_helper_add(connector, &simpledrm_connector_helper_funcs); | |
| drm_connector_set_panel_orientation_with_quirk(connector, orientation, | |
| width, height); | |
| ret = drm_connector_attach_encoder(connector, encoder); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| drm_mode_config_reset(dev); | |
| return sdev; | |
| } | |
| /* | |
| * DRM driver | |
| */ | |
| DEFINE_DRM_GEM_FOPS(simpledrm_fops); | |
| static struct drm_driver simpledrm_driver = { | |
| DRM_GEM_SHMEM_DRIVER_OPS, | |
| DRM_FBDEV_SHMEM_DRIVER_OPS, | |
| .name = DRIVER_NAME, | |
| .desc = DRIVER_DESC, | |
| .major = DRIVER_MAJOR, | |
| .minor = DRIVER_MINOR, | |
| .driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET, | |
| .fops = &simpledrm_fops, | |
| }; | |
| /* | |
| * Platform driver | |
| */ | |
| static int simpledrm_pm_suspend(struct device *dev) | |
| { | |
| struct simpledrm_device *sdev = dev_get_drvdata(dev); | |
| struct drm_device *drm = &sdev->sysfb.dev; | |
| return drm_mode_config_helper_suspend(drm); | |
| } | |
| static int simpledrm_pm_resume(struct device *dev) | |
| { | |
| struct simpledrm_device *sdev = dev_get_drvdata(dev); | |
| struct drm_device *drm = &sdev->sysfb.dev; | |
| return drm_mode_config_helper_resume(drm); | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(simpledrm_pm_ops, simpledrm_pm_suspend, simpledrm_pm_resume); | |
| static int simpledrm_probe(struct platform_device *pdev) | |
| { | |
| struct simpledrm_device *sdev; | |
| struct drm_sysfb_device *sysfb; | |
| struct drm_device *dev; | |
| int ret; | |
| sdev = simpledrm_device_create(&simpledrm_driver, pdev); | |
| if (IS_ERR(sdev)) | |
| return PTR_ERR(sdev); | |
| sysfb = &sdev->sysfb; | |
| dev = &sysfb->dev; | |
| ret = drm_dev_register(dev, 0); | |
| if (ret) | |
| return ret; | |
| drm_client_setup(dev, sdev->sysfb.fb_format); | |
| return 0; | |
| } | |
| static void simpledrm_remove(struct platform_device *pdev) | |
| { | |
| struct simpledrm_device *sdev = platform_get_drvdata(pdev); | |
| struct drm_device *dev = &sdev->sysfb.dev; | |
| drm_dev_unplug(dev); | |
| } | |
| static const struct of_device_id simpledrm_of_match_table[] = { | |
| { .compatible = "simple-framebuffer", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, simpledrm_of_match_table); | |
| static struct platform_driver simpledrm_platform_driver = { | |
| .driver = { | |
| .name = "simple-framebuffer", /* connect to sysfb */ | |
| .of_match_table = simpledrm_of_match_table, | |
| .pm = pm_sleep_ptr(&simpledrm_pm_ops), | |
| }, | |
| .probe = simpledrm_probe, | |
| .remove = simpledrm_remove, | |
| }; | |
| module_platform_driver(simpledrm_platform_driver); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL v2"); |