| // SPDX-License-Identifier: GPL-2.0-or-later | |
| // | |
| // Copyright (C) 2018 ROHM Semiconductors | |
| // | |
| // RTC driver for ROHM BD71828 and BD71815 PMIC | |
| #include <linux/bcd.h> | |
| #include <linux/mfd/rohm-bd71815.h> | |
| #include <linux/mfd/rohm-bd71828.h> | |
| #include <linux/mfd/rohm-bd72720.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/rtc.h> | |
| /* | |
| * On BD71828 and BD71815 the ALM0 MASK is 14 bytes after the ALM0 | |
| * block start | |
| */ | |
| #define BD718XX_ALM_EN_OFFSET 14 | |
| /* | |
| * We read regs RTC_SEC => RTC_YEAR | |
| * this struct is ordered according to chip registers. | |
| * Keep it u8 only (or packed) to avoid padding issues. | |
| */ | |
| struct bd70528_rtc_day { | |
| u8 sec; | |
| u8 min; | |
| u8 hour; | |
| } __packed; | |
| struct bd70528_rtc_data { | |
| struct bd70528_rtc_day time; | |
| u8 week; | |
| u8 day; | |
| u8 month; | |
| u8 year; | |
| } __packed; | |
| struct bd71828_rtc_alm { | |
| struct bd70528_rtc_data alm0; | |
| struct bd70528_rtc_data alm1; | |
| u8 alm_mask; | |
| u8 alm1_mask; | |
| } __packed; | |
| struct bd70528_rtc { | |
| struct rohm_regmap_dev *parent; | |
| struct regmap *regmap; | |
| struct device *dev; | |
| u8 reg_time_start; | |
| u8 bd718xx_alm_block_start; | |
| }; | |
| static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d) | |
| { | |
| d->sec &= ~BD70528_MASK_RTC_SEC; | |
| d->min &= ~BD70528_MASK_RTC_MINUTE; | |
| d->hour &= ~BD70528_MASK_RTC_HOUR; | |
| d->sec |= bin2bcd(t->tm_sec); | |
| d->min |= bin2bcd(t->tm_min); | |
| d->hour |= bin2bcd(t->tm_hour); | |
| } | |
| static inline void tm2rtc(struct rtc_time *t, struct bd70528_rtc_data *r) | |
| { | |
| r->day &= ~BD70528_MASK_RTC_DAY; | |
| r->week &= ~BD70528_MASK_RTC_WEEK; | |
| r->month &= ~BD70528_MASK_RTC_MONTH; | |
| /* | |
| * PM and 24H bits are not used by Wake - thus we clear them | |
| * here and not in tmday2rtc() which is also used by wake. | |
| */ | |
| r->time.hour &= ~(BD70528_MASK_RTC_HOUR_PM | BD70528_MASK_RTC_HOUR_24H); | |
| tmday2rtc(t, &r->time); | |
| /* | |
| * We do always set time in 24H mode. | |
| */ | |
| r->time.hour |= BD70528_MASK_RTC_HOUR_24H; | |
| r->day |= bin2bcd(t->tm_mday); | |
| r->week |= bin2bcd(t->tm_wday); | |
| r->month |= bin2bcd(t->tm_mon + 1); | |
| r->year = bin2bcd(t->tm_year - 100); | |
| } | |
| static inline void rtc2tm(struct bd70528_rtc_data *r, struct rtc_time *t) | |
| { | |
| t->tm_sec = bcd2bin(r->time.sec & BD70528_MASK_RTC_SEC); | |
| t->tm_min = bcd2bin(r->time.min & BD70528_MASK_RTC_MINUTE); | |
| t->tm_hour = bcd2bin(r->time.hour & BD70528_MASK_RTC_HOUR); | |
| /* | |
| * If RTC is in 12H mode, then bit BD70528_MASK_RTC_HOUR_PM | |
| * is not BCD value but tells whether it is AM or PM | |
| */ | |
| if (!(r->time.hour & BD70528_MASK_RTC_HOUR_24H)) { | |
| t->tm_hour %= 12; | |
| if (r->time.hour & BD70528_MASK_RTC_HOUR_PM) | |
| t->tm_hour += 12; | |
| } | |
| t->tm_mday = bcd2bin(r->day & BD70528_MASK_RTC_DAY); | |
| t->tm_mon = bcd2bin(r->month & BD70528_MASK_RTC_MONTH) - 1; | |
| t->tm_year = 100 + bcd2bin(r->year & BD70528_MASK_RTC_YEAR); | |
| t->tm_wday = bcd2bin(r->week & BD70528_MASK_RTC_WEEK); | |
| } | |
| static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a) | |
| { | |
| int ret; | |
| struct bd71828_rtc_alm alm; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm, | |
| sizeof(alm)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read alarm regs\n"); | |
| return ret; | |
| } | |
| tm2rtc(&a->time, &alm.alm0); | |
| if (!a->enabled) | |
| alm.alm_mask &= ~BD70528_MASK_ALM_EN; | |
| else | |
| alm.alm_mask |= BD70528_MASK_ALM_EN; | |
| ret = regmap_bulk_write(r->regmap, r->bd718xx_alm_block_start, &alm, | |
| sizeof(alm)); | |
| if (ret) | |
| dev_err(dev, "Failed to set alarm time\n"); | |
| return ret; | |
| } | |
| static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a) | |
| { | |
| int ret; | |
| struct bd71828_rtc_alm alm; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm, | |
| sizeof(alm)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read alarm regs\n"); | |
| return ret; | |
| } | |
| rtc2tm(&alm.alm0, &a->time); | |
| a->time.tm_mday = -1; | |
| a->time.tm_mon = -1; | |
| a->time.tm_year = -1; | |
| a->enabled = !!(alm.alm_mask & BD70528_MASK_ALM_EN); | |
| a->pending = 0; | |
| return 0; | |
| } | |
| static int bd71828_set_time(struct device *dev, struct rtc_time *t) | |
| { | |
| int ret; | |
| struct bd70528_rtc_data rtc_data; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, | |
| sizeof(rtc_data)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read RTC time registers\n"); | |
| return ret; | |
| } | |
| tm2rtc(t, &rtc_data); | |
| ret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data, | |
| sizeof(rtc_data)); | |
| if (ret) | |
| dev_err(dev, "Failed to set RTC time\n"); | |
| return ret; | |
| } | |
| static int bd70528_get_time(struct device *dev, struct rtc_time *t) | |
| { | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| struct bd70528_rtc_data rtc_data; | |
| int ret; | |
| /* read the RTC date and time registers all at once */ | |
| ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, | |
| sizeof(rtc_data)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read RTC time (err %d)\n", ret); | |
| return ret; | |
| } | |
| rtc2tm(&rtc_data, t); | |
| return 0; | |
| } | |
| static int bd71828_alm_enable(struct device *dev, unsigned int enabled) | |
| { | |
| int ret; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| unsigned int enableval = BD70528_MASK_ALM_EN; | |
| if (!enabled) | |
| enableval = 0; | |
| ret = regmap_update_bits(r->regmap, r->bd718xx_alm_block_start + | |
| BD718XX_ALM_EN_OFFSET, BD70528_MASK_ALM_EN, | |
| enableval); | |
| if (ret) | |
| dev_err(dev, "Failed to change alarm state\n"); | |
| return ret; | |
| } | |
| static const struct rtc_class_ops bd71828_rtc_ops = { | |
| .read_time = bd70528_get_time, | |
| .set_time = bd71828_set_time, | |
| .read_alarm = bd71828_read_alarm, | |
| .set_alarm = bd71828_set_alarm, | |
| .alarm_irq_enable = bd71828_alm_enable, | |
| }; | |
| static irqreturn_t alm_hndlr(int irq, void *data) | |
| { | |
| struct rtc_device *rtc = data; | |
| rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF | RTC_PF); | |
| return IRQ_HANDLED; | |
| } | |
| static int bd70528_probe(struct platform_device *pdev) | |
| { | |
| struct bd70528_rtc *bd_rtc; | |
| const struct rtc_class_ops *rtc_ops; | |
| int ret; | |
| struct rtc_device *rtc; | |
| int irq; | |
| unsigned int hr; | |
| u8 hour_reg; | |
| enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; | |
| bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL); | |
| if (!bd_rtc) | |
| return -ENOMEM; | |
| bd_rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL); | |
| if (!bd_rtc->regmap) { | |
| dev_err(&pdev->dev, "No regmap\n"); | |
| return -EINVAL; | |
| } | |
| bd_rtc->dev = &pdev->dev; | |
| rtc_ops = &bd71828_rtc_ops; | |
| switch (chip) { | |
| case ROHM_CHIP_TYPE_BD71815: | |
| bd_rtc->reg_time_start = BD71815_REG_RTC_START; | |
| /* | |
| * See also BD718XX_ALM_EN_OFFSET: | |
| * This works for BD71828, BD71815, and BD72720 as they all | |
| * have same offset between the ALM0 start and the ALM0_MASK. | |
| * If new ICs are to be added this requires proper check as | |
| * the ALM0_MASK is not located at the end of ALM0 block - | |
| * but after all ALM blocks. If amount of ALMs differ, the | |
| * offset to enable/disable is likely to be incorrect and | |
| * enable/disable must be given as own reg address here. | |
| */ | |
| bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START; | |
| hour_reg = BD71815_REG_HOUR; | |
| break; | |
| case ROHM_CHIP_TYPE_BD71828: | |
| bd_rtc->reg_time_start = BD71828_REG_RTC_START; | |
| bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START; | |
| hour_reg = BD71828_REG_RTC_HOUR; | |
| break; | |
| case ROHM_CHIP_TYPE_BD72720: | |
| bd_rtc->reg_time_start = BD72720_REG_RTC_START; | |
| bd_rtc->bd718xx_alm_block_start = BD72720_REG_RTC_ALM_START; | |
| hour_reg = BD72720_REG_RTC_HOUR; | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "Unknown chip\n"); | |
| return -ENOENT; | |
| } | |
| irq = platform_get_irq_byname(pdev, "bd70528-rtc-alm-0"); | |
| if (irq < 0) | |
| return irq; | |
| platform_set_drvdata(pdev, bd_rtc); | |
| ret = regmap_read(bd_rtc->regmap, hour_reg, &hr); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to reag RTC clock\n"); | |
| return ret; | |
| } | |
| if (!(hr & BD70528_MASK_RTC_HOUR_24H)) { | |
| struct rtc_time t; | |
| ret = rtc_ops->read_time(&pdev->dev, &t); | |
| if (!ret) | |
| ret = rtc_ops->set_time(&pdev->dev, &t); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "Setting 24H clock for RTC failed\n"); | |
| return ret; | |
| } | |
| } | |
| device_set_wakeup_capable(&pdev->dev, true); | |
| device_wakeup_enable(&pdev->dev); | |
| rtc = devm_rtc_allocate_device(&pdev->dev); | |
| if (IS_ERR(rtc)) { | |
| dev_err(&pdev->dev, "RTC device creation failed\n"); | |
| return PTR_ERR(rtc); | |
| } | |
| rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; | |
| rtc->range_max = RTC_TIMESTAMP_END_2099; | |
| rtc->ops = rtc_ops; | |
| /* Request alarm IRQ prior to registerig the RTC */ | |
| ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, &alm_hndlr, | |
| IRQF_ONESHOT, "bd70528-rtc", rtc); | |
| if (ret) | |
| return ret; | |
| return devm_rtc_register_device(rtc); | |
| } | |
| static const struct platform_device_id bd718x7_rtc_id[] = { | |
| { .name = "bd71828-rtc", .driver_data = ROHM_CHIP_TYPE_BD71828 }, | |
| { .name = "bd71815-rtc", .driver_data = ROHM_CHIP_TYPE_BD71815 }, | |
| { .name = "bd72720-rtc", .driver_data = ROHM_CHIP_TYPE_BD72720 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id); | |
| static struct platform_driver bd70528_rtc = { | |
| .driver = { | |
| .name = "bd70528-rtc" | |
| }, | |
| .probe = bd70528_probe, | |
| .id_table = bd718x7_rtc_id, | |
| }; | |
| module_platform_driver(bd70528_rtc); | |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); | |
| MODULE_DESCRIPTION("ROHM BD71828 and BD71815 PMIC RTC driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:bd70528-rtc"); |