| // SPDX-License-Identifier: GPL-2.0-or-later | |
| #include "linux/virtio_pci.h" | |
| #include <linux/virtio_pci_legacy.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| /* | |
| * vp_legacy_probe: probe the legacy virtio pci device, note that the | |
| * caller is required to enable PCI device before calling this function. | |
| * @ldev: the legacy virtio-pci device | |
| * | |
| * Return 0 on succeed otherwise fail | |
| */ | |
| int vp_legacy_probe(struct virtio_pci_legacy_device *ldev) | |
| { | |
| struct pci_dev *pci_dev = ldev->pci_dev; | |
| int rc; | |
| /* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */ | |
| if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f) | |
| return -ENODEV; | |
| if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) | |
| return -ENODEV; | |
| rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); | |
| if (rc) { | |
| rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); | |
| } else { | |
| /* | |
| * The virtio ring base address is expressed as a 32-bit PFN, | |
| * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. | |
| */ | |
| dma_set_coherent_mask(&pci_dev->dev, | |
| DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); | |
| } | |
| if (rc) | |
| dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); | |
| rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy"); | |
| if (rc) | |
| return rc; | |
| ldev->ioaddr = pci_iomap(pci_dev, 0, 0); | |
| if (!ldev->ioaddr) { | |
| rc = -EIO; | |
| goto err_iomap; | |
| } | |
| ldev->isr = ldev->ioaddr + VIRTIO_PCI_ISR; | |
| ldev->id.vendor = pci_dev->subsystem_vendor; | |
| ldev->id.device = pci_dev->subsystem_device; | |
| return 0; | |
| err_iomap: | |
| pci_release_region(pci_dev, 0); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_probe); | |
| /* | |
| * vp_legacy_probe: remove and cleanup the legacy virtio pci device | |
| * @ldev: the legacy virtio-pci device | |
| */ | |
| void vp_legacy_remove(struct virtio_pci_legacy_device *ldev) | |
| { | |
| struct pci_dev *pci_dev = ldev->pci_dev; | |
| pci_iounmap(pci_dev, ldev->ioaddr); | |
| pci_release_region(pci_dev, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_remove); | |
| /* | |
| * vp_legacy_get_features - get features from device | |
| * @ldev: the legacy virtio-pci device | |
| * | |
| * Returns the features read from the device | |
| */ | |
| u64 vp_legacy_get_features(struct virtio_pci_legacy_device *ldev) | |
| { | |
| return ioread32(ldev->ioaddr + VIRTIO_PCI_HOST_FEATURES); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_get_features); | |
| /* | |
| * vp_legacy_get_driver_features - get driver features from device | |
| * @ldev: the legacy virtio-pci device | |
| * | |
| * Returns the driver features read from the device | |
| */ | |
| u64 vp_legacy_get_driver_features(struct virtio_pci_legacy_device *ldev) | |
| { | |
| return ioread32(ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_get_driver_features); | |
| /* | |
| * vp_legacy_set_features - set features to device | |
| * @ldev: the legacy virtio-pci device | |
| * @features: the features set to device | |
| */ | |
| void vp_legacy_set_features(struct virtio_pci_legacy_device *ldev, | |
| u32 features) | |
| { | |
| iowrite32(features, ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_set_features); | |
| /* | |
| * vp_legacy_get_status - get the device status | |
| * @ldev: the legacy virtio-pci device | |
| * | |
| * Returns the status read from device | |
| */ | |
| u8 vp_legacy_get_status(struct virtio_pci_legacy_device *ldev) | |
| { | |
| return ioread8(ldev->ioaddr + VIRTIO_PCI_STATUS); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_get_status); | |
| /* | |
| * vp_legacy_set_status - set status to device | |
| * @ldev: the legacy virtio-pci device | |
| * @status: the status set to device | |
| */ | |
| void vp_legacy_set_status(struct virtio_pci_legacy_device *ldev, | |
| u8 status) | |
| { | |
| iowrite8(status, ldev->ioaddr + VIRTIO_PCI_STATUS); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_set_status); | |
| /* | |
| * vp_legacy_queue_vector - set the MSIX vector for a specific virtqueue | |
| * @ldev: the legacy virtio-pci device | |
| * @index: queue index | |
| * @vector: the queue vector | |
| * | |
| * Returns the queue vector read from the device | |
| */ | |
| u16 vp_legacy_queue_vector(struct virtio_pci_legacy_device *ldev, | |
| u16 index, u16 vector) | |
| { | |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | |
| iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); | |
| /* Flush the write out to device */ | |
| return ioread16(ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_queue_vector); | |
| /* | |
| * vp_legacy_config_vector - set the vector for config interrupt | |
| * @ldev: the legacy virtio-pci device | |
| * @vector: the config vector | |
| * | |
| * Returns the config vector read from the device | |
| */ | |
| u16 vp_legacy_config_vector(struct virtio_pci_legacy_device *ldev, | |
| u16 vector) | |
| { | |
| /* Setup the vector used for configuration events */ | |
| iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); | |
| /* Verify we had enough resources to assign the vector */ | |
| /* Will also flush the write out to device */ | |
| return ioread16(ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_config_vector); | |
| /* | |
| * vp_legacy_set_queue_address - set the virtqueue address | |
| * @ldev: the legacy virtio-pci device | |
| * @index: the queue index | |
| * @queue_pfn: pfn of the virtqueue | |
| */ | |
| void vp_legacy_set_queue_address(struct virtio_pci_legacy_device *ldev, | |
| u16 index, u32 queue_pfn) | |
| { | |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | |
| iowrite32(queue_pfn, ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_set_queue_address); | |
| /* | |
| * vp_legacy_get_queue_enable - enable a virtqueue | |
| * @ldev: the legacy virtio-pci device | |
| * @index: the queue index | |
| * | |
| * Returns whether a virtqueue is enabled or not | |
| */ | |
| bool vp_legacy_get_queue_enable(struct virtio_pci_legacy_device *ldev, | |
| u16 index) | |
| { | |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | |
| return ioread32(ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_get_queue_enable); | |
| /* | |
| * vp_legacy_get_queue_size - get size for a virtqueue | |
| * @ldev: the legacy virtio-pci device | |
| * @index: the queue index | |
| * | |
| * Returns the size of the virtqueue | |
| */ | |
| u16 vp_legacy_get_queue_size(struct virtio_pci_legacy_device *ldev, | |
| u16 index) | |
| { | |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | |
| return ioread16(ldev->ioaddr + VIRTIO_PCI_QUEUE_NUM); | |
| } | |
| EXPORT_SYMBOL_GPL(vp_legacy_get_queue_size); | |
| MODULE_VERSION("0.1"); | |
| MODULE_DESCRIPTION("Legacy Virtio PCI Device"); | |
| MODULE_AUTHOR("Wu Zongyong <wuzongyong@linux.alibaba.com>"); | |
| MODULE_LICENSE("GPL"); |