| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/kernel/reboot.c | |
| * | |
| * Copyright (C) 2013 Linus Torvalds | |
| */ | |
| #define pr_fmt(fmt) "reboot: " fmt | |
| #include <linux/atomic.h> | |
| #include <linux/ctype.h> | |
| #include <linux/export.h> | |
| #include <linux/kexec.h> | |
| #include <linux/kmod.h> | |
| #include <linux/kmsg_dump.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/reboot.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/suspend.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/uaccess.h> | |
| /* | |
| * this indicates whether you can reboot with ctrl-alt-del: the default is yes | |
| */ | |
| static int C_A_D = 1; | |
| struct pid __rcu *cad_pid; | |
| #if defined(CONFIG_ARM) | |
| #define DEFAULT_REBOOT_MODE = REBOOT_HARD | |
| #else | |
| #define DEFAULT_REBOOT_MODE | |
| #endif | |
| enum reboot_mode reboot_mode DEFAULT_REBOOT_MODE; | |
| EXPORT_SYMBOL_GPL(reboot_mode); | |
| enum reboot_mode panic_reboot_mode = REBOOT_UNDEFINED; | |
| static enum hw_protection_action hw_protection_action = HWPROT_ACT_SHUTDOWN; | |
| /* | |
| * This variable is used privately to keep track of whether or not | |
| * reboot_type is still set to its default value (i.e., reboot= hasn't | |
| * been set on the command line). This is needed so that we can | |
| * suppress DMI scanning for reboot quirks. Without it, it's | |
| * impossible to override a faulty reboot quirk without recompiling. | |
| */ | |
| int reboot_default = 1; | |
| int reboot_cpu; | |
| enum reboot_type reboot_type = BOOT_ACPI; | |
| int reboot_force; | |
| struct sys_off_handler { | |
| struct notifier_block nb; | |
| int (*sys_off_cb)(struct sys_off_data *data); | |
| void *cb_data; | |
| enum sys_off_mode mode; | |
| bool blocking; | |
| void *list; | |
| struct device *dev; | |
| }; | |
| /* | |
| * This variable is used to indicate if a halt was initiated instead of a | |
| * reboot when the reboot call was invoked with LINUX_REBOOT_CMD_POWER_OFF, but | |
| * the system cannot be powered off. This allowes kernel_halt() to notify users | |
| * of that. | |
| */ | |
| static bool poweroff_fallback_to_halt; | |
| /* | |
| * Temporary stub that prevents linkage failure while we're in process | |
| * of removing all uses of legacy pm_power_off() around the kernel. | |
| */ | |
| void __weak (*pm_power_off)(void); | |
| /* | |
| * Notifier list for kernel code which wants to be called | |
| * at shutdown. This is used to stop any idling DMA operations | |
| * and the like. | |
| */ | |
| static BLOCKING_NOTIFIER_HEAD(reboot_notifier_list); | |
| /** | |
| * emergency_restart - reboot the system | |
| * | |
| * Without shutting down any hardware or taking any locks | |
| * reboot the system. This is called when we know we are in | |
| * trouble so this is our best effort to reboot. This is | |
| * safe to call in interrupt context. | |
| */ | |
| void emergency_restart(void) | |
| { | |
| kmsg_dump(KMSG_DUMP_EMERG); | |
| system_state = SYSTEM_RESTART; | |
| machine_emergency_restart(); | |
| } | |
| EXPORT_SYMBOL_GPL(emergency_restart); | |
| void kernel_restart_prepare(char *cmd) | |
| { | |
| blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd); | |
| system_state = SYSTEM_RESTART; | |
| usermodehelper_disable(); | |
| device_shutdown(); | |
| } | |
| /** | |
| * register_reboot_notifier - Register function to be called at reboot time | |
| * @nb: Info about notifier function to be called | |
| * | |
| * Registers a function with the list of functions | |
| * to be called at reboot time. | |
| * | |
| * Currently always returns zero, as blocking_notifier_chain_register() | |
| * always returns zero. | |
| */ | |
| int register_reboot_notifier(struct notifier_block *nb) | |
| { | |
| return blocking_notifier_chain_register(&reboot_notifier_list, nb); | |
| } | |
| EXPORT_SYMBOL(register_reboot_notifier); | |
| /** | |
| * unregister_reboot_notifier - Unregister previously registered reboot notifier | |
| * @nb: Hook to be unregistered | |
| * | |
| * Unregisters a previously registered reboot | |
| * notifier function. | |
| * | |
| * Returns zero on success, or %-ENOENT on failure. | |
| */ | |
| int unregister_reboot_notifier(struct notifier_block *nb) | |
| { | |
| return blocking_notifier_chain_unregister(&reboot_notifier_list, nb); | |
| } | |
| EXPORT_SYMBOL(unregister_reboot_notifier); | |
| static void devm_unregister_reboot_notifier(struct device *dev, void *res) | |
| { | |
| WARN_ON(unregister_reboot_notifier(*(struct notifier_block **)res)); | |
| } | |
| int devm_register_reboot_notifier(struct device *dev, struct notifier_block *nb) | |
| { | |
| struct notifier_block **rcnb; | |
| int ret; | |
| rcnb = devres_alloc(devm_unregister_reboot_notifier, | |
| sizeof(*rcnb), GFP_KERNEL); | |
| if (!rcnb) | |
| return -ENOMEM; | |
| ret = register_reboot_notifier(nb); | |
| if (!ret) { | |
| *rcnb = nb; | |
| devres_add(dev, rcnb); | |
| } else { | |
| devres_free(rcnb); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(devm_register_reboot_notifier); | |
| /* | |
| * Notifier list for kernel code which wants to be called | |
| * to restart the system. | |
| */ | |
| static ATOMIC_NOTIFIER_HEAD(restart_handler_list); | |
| /** | |
| * register_restart_handler - Register function to be called to reset | |
| * the system | |
| * @nb: Info about handler function to be called | |
| * @nb->priority: Handler priority. Handlers should follow the | |
| * following guidelines for setting priorities. | |
| * 0: Restart handler of last resort, | |
| * with limited restart capabilities | |
| * 128: Default restart handler; use if no other | |
| * restart handler is expected to be available, | |
| * and/or if restart functionality is | |
| * sufficient to restart the entire system | |
| * 255: Highest priority restart handler, will | |
| * preempt all other restart handlers | |
| * | |
| * Registers a function with code to be called to restart the | |
| * system. | |
| * | |
| * Registered functions will be called from machine_restart as last | |
| * step of the restart sequence (if the architecture specific | |
| * machine_restart function calls do_kernel_restart - see below | |
| * for details). | |
| * Registered functions are expected to restart the system immediately. | |
| * If more than one function is registered, the restart handler priority | |
| * selects which function will be called first. | |
| * | |
| * Restart handlers are expected to be registered from non-architecture | |
| * code, typically from drivers. A typical use case would be a system | |
| * where restart functionality is provided through a watchdog. Multiple | |
| * restart handlers may exist; for example, one restart handler might | |
| * restart the entire system, while another only restarts the CPU. | |
| * In such cases, the restart handler which only restarts part of the | |
| * hardware is expected to register with low priority to ensure that | |
| * it only runs if no other means to restart the system is available. | |
| * | |
| * Currently always returns zero, as atomic_notifier_chain_register() | |
| * always returns zero. | |
| */ | |
| int register_restart_handler(struct notifier_block *nb) | |
| { | |
| return atomic_notifier_chain_register(&restart_handler_list, nb); | |
| } | |
| EXPORT_SYMBOL(register_restart_handler); | |
| /** | |
| * unregister_restart_handler - Unregister previously registered | |
| * restart handler | |
| * @nb: Hook to be unregistered | |
| * | |
| * Unregisters a previously registered restart handler function. | |
| * | |
| * Returns zero on success, or %-ENOENT on failure. | |
| */ | |
| int unregister_restart_handler(struct notifier_block *nb) | |
| { | |
| return atomic_notifier_chain_unregister(&restart_handler_list, nb); | |
| } | |
| EXPORT_SYMBOL(unregister_restart_handler); | |
| /** | |
| * do_kernel_restart - Execute kernel restart handler call chain | |
| * | |
| * @cmd: pointer to buffer containing command to execute for restart | |
| * or %NULL | |
| * | |
| * Calls functions registered with register_restart_handler. | |
| * | |
| * Expected to be called from machine_restart as last step of the restart | |
| * sequence. | |
| * | |
| * Restarts the system immediately if a restart handler function has been | |
| * registered. Otherwise does nothing. | |
| */ | |
| void do_kernel_restart(char *cmd) | |
| { | |
| atomic_notifier_call_chain(&restart_handler_list, reboot_mode, cmd); | |
| } | |
| void migrate_to_reboot_cpu(void) | |
| { | |
| /* The boot cpu is always logical cpu 0 */ | |
| int cpu = reboot_cpu; | |
| cpu_hotplug_disable(); | |
| /* Make certain the cpu I'm about to reboot on is online */ | |
| if (!cpu_online(cpu)) | |
| cpu = cpumask_first(cpu_online_mask); | |
| /* Prevent races with other tasks migrating this task */ | |
| current->flags |= PF_NO_SETAFFINITY; | |
| /* Make certain I only run on the appropriate processor */ | |
| set_cpus_allowed_ptr(current, cpumask_of(cpu)); | |
| } | |
| /* | |
| * Notifier list for kernel code which wants to be called | |
| * to prepare system for restart. | |
| */ | |
| static BLOCKING_NOTIFIER_HEAD(restart_prep_handler_list); | |
| static void do_kernel_restart_prepare(void) | |
| { | |
| blocking_notifier_call_chain(&restart_prep_handler_list, 0, NULL); | |
| } | |
| /** | |
| * kernel_restart - reboot the system | |
| * @cmd: pointer to buffer containing command to execute for restart | |
| * or %NULL | |
| * | |
| * Shutdown everything and perform a clean reboot. | |
| * This is not safe to call in interrupt context. | |
| */ | |
| void kernel_restart(char *cmd) | |
| { | |
| kernel_restart_prepare(cmd); | |
| do_kernel_restart_prepare(); | |
| migrate_to_reboot_cpu(); | |
| syscore_shutdown(); | |
| if (!cmd) | |
| pr_emerg("Restarting system\n"); | |
| else | |
| pr_emerg("Restarting system with command '%s'\n", cmd); | |
| kmsg_dump(KMSG_DUMP_SHUTDOWN); | |
| machine_restart(cmd); | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_restart); | |
| static void kernel_shutdown_prepare(enum system_states state) | |
| { | |
| blocking_notifier_call_chain(&reboot_notifier_list, | |
| (state == SYSTEM_HALT) ? SYS_HALT : SYS_POWER_OFF, NULL); | |
| system_state = state; | |
| usermodehelper_disable(); | |
| device_shutdown(); | |
| } | |
| /** | |
| * kernel_halt - halt the system | |
| * | |
| * Shutdown everything and perform a clean system halt. | |
| */ | |
| void kernel_halt(void) | |
| { | |
| kernel_shutdown_prepare(SYSTEM_HALT); | |
| migrate_to_reboot_cpu(); | |
| syscore_shutdown(); | |
| if (poweroff_fallback_to_halt) | |
| pr_emerg("Power off not available: System halted instead\n"); | |
| else | |
| pr_emerg("System halted\n"); | |
| kmsg_dump(KMSG_DUMP_SHUTDOWN); | |
| machine_halt(); | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_halt); | |
| /* | |
| * Notifier list for kernel code which wants to be called | |
| * to prepare system for power off. | |
| */ | |
| static BLOCKING_NOTIFIER_HEAD(power_off_prep_handler_list); | |
| /* | |
| * Notifier list for kernel code which wants to be called | |
| * to power off system. | |
| */ | |
| static ATOMIC_NOTIFIER_HEAD(power_off_handler_list); | |
| static int sys_off_notify(struct notifier_block *nb, | |
| unsigned long mode, void *cmd) | |
| { | |
| struct sys_off_handler *handler; | |
| struct sys_off_data data = {}; | |
| handler = container_of(nb, struct sys_off_handler, nb); | |
| data.cb_data = handler->cb_data; | |
| data.mode = mode; | |
| data.cmd = cmd; | |
| data.dev = handler->dev; | |
| return handler->sys_off_cb(&data); | |
| } | |
| static struct sys_off_handler platform_sys_off_handler; | |
| static struct sys_off_handler *alloc_sys_off_handler(int priority) | |
| { | |
| struct sys_off_handler *handler; | |
| gfp_t flags; | |
| /* | |
| * Platforms like m68k can't allocate sys_off handler dynamically | |
| * at the early boot time because memory allocator isn't available yet. | |
| */ | |
| if (priority == SYS_OFF_PRIO_PLATFORM) { | |
| handler = &platform_sys_off_handler; | |
| if (handler->cb_data) | |
| return ERR_PTR(-EBUSY); | |
| } else { | |
| if (system_state > SYSTEM_RUNNING) | |
| flags = GFP_ATOMIC; | |
| else | |
| flags = GFP_KERNEL; | |
| handler = kzalloc_obj(*handler, flags); | |
| if (!handler) | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| return handler; | |
| } | |
| static void free_sys_off_handler(struct sys_off_handler *handler) | |
| { | |
| if (handler == &platform_sys_off_handler) | |
| memset(handler, 0, sizeof(*handler)); | |
| else | |
| kfree(handler); | |
| } | |
| /** | |
| * register_sys_off_handler - Register sys-off handler | |
| * @mode: Sys-off mode | |
| * @priority: Handler priority | |
| * @callback: Callback function | |
| * @cb_data: Callback argument | |
| * | |
| * Registers system power-off or restart handler that will be invoked | |
| * at the step corresponding to the given sys-off mode. Handler's callback | |
| * should return NOTIFY_DONE to permit execution of the next handler in | |
| * the call chain or NOTIFY_STOP to break the chain (in error case for | |
| * example). | |
| * | |
| * Multiple handlers can be registered at the default priority level. | |
| * | |
| * Only one handler can be registered at the non-default priority level, | |
| * otherwise ERR_PTR(-EBUSY) is returned. | |
| * | |
| * Returns a new instance of struct sys_off_handler on success, or | |
| * an ERR_PTR()-encoded error code otherwise. | |
| */ | |
| struct sys_off_handler * | |
| register_sys_off_handler(enum sys_off_mode mode, | |
| int priority, | |
| int (*callback)(struct sys_off_data *data), | |
| void *cb_data) | |
| { | |
| struct sys_off_handler *handler; | |
| int err; | |
| handler = alloc_sys_off_handler(priority); | |
| if (IS_ERR(handler)) | |
| return handler; | |
| switch (mode) { | |
| case SYS_OFF_MODE_POWER_OFF_PREPARE: | |
| handler->list = &power_off_prep_handler_list; | |
| handler->blocking = true; | |
| break; | |
| case SYS_OFF_MODE_POWER_OFF: | |
| handler->list = &power_off_handler_list; | |
| break; | |
| case SYS_OFF_MODE_RESTART_PREPARE: | |
| handler->list = &restart_prep_handler_list; | |
| handler->blocking = true; | |
| break; | |
| case SYS_OFF_MODE_RESTART: | |
| handler->list = &restart_handler_list; | |
| break; | |
| default: | |
| free_sys_off_handler(handler); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| handler->nb.notifier_call = sys_off_notify; | |
| handler->nb.priority = priority; | |
| handler->sys_off_cb = callback; | |
| handler->cb_data = cb_data; | |
| handler->mode = mode; | |
| if (handler->blocking) { | |
| if (priority == SYS_OFF_PRIO_DEFAULT) | |
| err = blocking_notifier_chain_register(handler->list, | |
| &handler->nb); | |
| else | |
| err = blocking_notifier_chain_register_unique_prio(handler->list, | |
| &handler->nb); | |
| } else { | |
| if (priority == SYS_OFF_PRIO_DEFAULT) | |
| err = atomic_notifier_chain_register(handler->list, | |
| &handler->nb); | |
| else | |
| err = atomic_notifier_chain_register_unique_prio(handler->list, | |
| &handler->nb); | |
| } | |
| if (err) { | |
| free_sys_off_handler(handler); | |
| return ERR_PTR(err); | |
| } | |
| return handler; | |
| } | |
| EXPORT_SYMBOL_GPL(register_sys_off_handler); | |
| /** | |
| * unregister_sys_off_handler - Unregister sys-off handler | |
| * @handler: Sys-off handler | |
| * | |
| * Unregisters given sys-off handler. | |
| */ | |
| void unregister_sys_off_handler(struct sys_off_handler *handler) | |
| { | |
| int err; | |
| if (IS_ERR_OR_NULL(handler)) | |
| return; | |
| if (handler->blocking) | |
| err = blocking_notifier_chain_unregister(handler->list, | |
| &handler->nb); | |
| else | |
| err = atomic_notifier_chain_unregister(handler->list, | |
| &handler->nb); | |
| /* sanity check, shall never happen */ | |
| WARN_ON(err); | |
| free_sys_off_handler(handler); | |
| } | |
| EXPORT_SYMBOL_GPL(unregister_sys_off_handler); | |
| static void devm_unregister_sys_off_handler(void *data) | |
| { | |
| struct sys_off_handler *handler = data; | |
| unregister_sys_off_handler(handler); | |
| } | |
| /** | |
| * devm_register_sys_off_handler - Register sys-off handler | |
| * @dev: Device that registers handler | |
| * @mode: Sys-off mode | |
| * @priority: Handler priority | |
| * @callback: Callback function | |
| * @cb_data: Callback argument | |
| * | |
| * Registers resource-managed sys-off handler. | |
| * | |
| * Returns zero on success, or error code on failure. | |
| */ | |
| int devm_register_sys_off_handler(struct device *dev, | |
| enum sys_off_mode mode, | |
| int priority, | |
| int (*callback)(struct sys_off_data *data), | |
| void *cb_data) | |
| { | |
| struct sys_off_handler *handler; | |
| handler = register_sys_off_handler(mode, priority, callback, cb_data); | |
| if (IS_ERR(handler)) | |
| return PTR_ERR(handler); | |
| handler->dev = dev; | |
| return devm_add_action_or_reset(dev, devm_unregister_sys_off_handler, | |
| handler); | |
| } | |
| EXPORT_SYMBOL_GPL(devm_register_sys_off_handler); | |
| /** | |
| * devm_register_power_off_handler - Register power-off handler | |
| * @dev: Device that registers callback | |
| * @callback: Callback function | |
| * @cb_data: Callback's argument | |
| * | |
| * Registers resource-managed sys-off handler with a default priority | |
| * and using power-off mode. | |
| * | |
| * Returns zero on success, or error code on failure. | |
| */ | |
| int devm_register_power_off_handler(struct device *dev, | |
| int (*callback)(struct sys_off_data *data), | |
| void *cb_data) | |
| { | |
| return devm_register_sys_off_handler(dev, | |
| SYS_OFF_MODE_POWER_OFF, | |
| SYS_OFF_PRIO_DEFAULT, | |
| callback, cb_data); | |
| } | |
| EXPORT_SYMBOL_GPL(devm_register_power_off_handler); | |
| /** | |
| * devm_register_restart_handler - Register restart handler | |
| * @dev: Device that registers callback | |
| * @callback: Callback function | |
| * @cb_data: Callback's argument | |
| * | |
| * Registers resource-managed sys-off handler with a default priority | |
| * and using restart mode. | |
| * | |
| * Returns zero on success, or error code on failure. | |
| */ | |
| int devm_register_restart_handler(struct device *dev, | |
| int (*callback)(struct sys_off_data *data), | |
| void *cb_data) | |
| { | |
| return devm_register_sys_off_handler(dev, | |
| SYS_OFF_MODE_RESTART, | |
| SYS_OFF_PRIO_DEFAULT, | |
| callback, cb_data); | |
| } | |
| EXPORT_SYMBOL_GPL(devm_register_restart_handler); | |
| static struct sys_off_handler *platform_power_off_handler; | |
| static int platform_power_off_notify(struct sys_off_data *data) | |
| { | |
| void (*platform_power_power_off_cb)(void) = data->cb_data; | |
| platform_power_power_off_cb(); | |
| return NOTIFY_DONE; | |
| } | |
| /** | |
| * register_platform_power_off - Register platform-level power-off callback | |
| * @power_off: Power-off callback | |
| * | |
| * Registers power-off callback that will be called as last step | |
| * of the power-off sequence. This callback is expected to be invoked | |
| * for the last resort. Only one platform power-off callback is allowed | |
| * to be registered at a time. | |
| * | |
| * Returns zero on success, or error code on failure. | |
| */ | |
| int register_platform_power_off(void (*power_off)(void)) | |
| { | |
| struct sys_off_handler *handler; | |
| handler = register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, | |
| SYS_OFF_PRIO_PLATFORM, | |
| platform_power_off_notify, | |
| power_off); | |
| if (IS_ERR(handler)) | |
| return PTR_ERR(handler); | |
| platform_power_off_handler = handler; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(register_platform_power_off); | |
| /** | |
| * unregister_platform_power_off - Unregister platform-level power-off callback | |
| * @power_off: Power-off callback | |
| * | |
| * Unregisters previously registered platform power-off callback. | |
| */ | |
| void unregister_platform_power_off(void (*power_off)(void)) | |
| { | |
| if (platform_power_off_handler && | |
| platform_power_off_handler->cb_data == power_off) { | |
| unregister_sys_off_handler(platform_power_off_handler); | |
| platform_power_off_handler = NULL; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(unregister_platform_power_off); | |
| static int legacy_pm_power_off(struct sys_off_data *data) | |
| { | |
| if (pm_power_off) | |
| pm_power_off(); | |
| return NOTIFY_DONE; | |
| } | |
| static void do_kernel_power_off_prepare(void) | |
| { | |
| blocking_notifier_call_chain(&power_off_prep_handler_list, 0, NULL); | |
| } | |
| /** | |
| * do_kernel_power_off - Execute kernel power-off handler call chain | |
| * | |
| * Expected to be called as last step of the power-off sequence. | |
| * | |
| * Powers off the system immediately if a power-off handler function has | |
| * been registered. Otherwise does nothing. | |
| */ | |
| void do_kernel_power_off(void) | |
| { | |
| struct sys_off_handler *sys_off = NULL; | |
| /* | |
| * Register sys-off handlers for legacy PM callback. This allows | |
| * legacy PM callbacks temporary co-exist with the new sys-off API. | |
| * | |
| * TODO: Remove legacy handlers once all legacy PM users will be | |
| * switched to the sys-off based APIs. | |
| */ | |
| if (pm_power_off) | |
| sys_off = register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, | |
| SYS_OFF_PRIO_DEFAULT, | |
| legacy_pm_power_off, NULL); | |
| atomic_notifier_call_chain(&power_off_handler_list, 0, NULL); | |
| unregister_sys_off_handler(sys_off); | |
| } | |
| /** | |
| * kernel_can_power_off - check whether system can be powered off | |
| * | |
| * Returns true if power-off handler is registered and system can be | |
| * powered off, false otherwise. | |
| */ | |
| bool kernel_can_power_off(void) | |
| { | |
| return !atomic_notifier_call_chain_is_empty(&power_off_handler_list) || | |
| pm_power_off; | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_can_power_off); | |
| /** | |
| * kernel_power_off - power_off the system | |
| * | |
| * Shutdown everything and perform a clean system power_off. | |
| */ | |
| void kernel_power_off(void) | |
| { | |
| kernel_shutdown_prepare(SYSTEM_POWER_OFF); | |
| do_kernel_power_off_prepare(); | |
| migrate_to_reboot_cpu(); | |
| syscore_shutdown(); | |
| pr_emerg("Power down\n"); | |
| pr_flush(1000, true); | |
| kmsg_dump(KMSG_DUMP_SHUTDOWN); | |
| machine_power_off(); | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_power_off); | |
| DEFINE_MUTEX(system_transition_mutex); | |
| /* | |
| * Reboot system call: for obvious reasons only root may call it, | |
| * and even root needs to set up some magic numbers in the registers | |
| * so that some mistake won't make this reboot the whole machine. | |
| * You can also set the meaning of the ctrl-alt-del-key here. | |
| * | |
| * reboot doesn't sync: do that yourself before calling this. | |
| */ | |
| SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, | |
| void __user *, arg) | |
| { | |
| struct pid_namespace *pid_ns = task_active_pid_ns(current); | |
| char buffer[256]; | |
| int ret = 0; | |
| /* We only trust the superuser with rebooting the system. */ | |
| if (!ns_capable(pid_ns->user_ns, CAP_SYS_BOOT)) | |
| return -EPERM; | |
| /* For safety, we require "magic" arguments. */ | |
| if (magic1 != LINUX_REBOOT_MAGIC1 || | |
| (magic2 != LINUX_REBOOT_MAGIC2 && | |
| magic2 != LINUX_REBOOT_MAGIC2A && | |
| magic2 != LINUX_REBOOT_MAGIC2B && | |
| magic2 != LINUX_REBOOT_MAGIC2C)) | |
| return -EINVAL; | |
| /* | |
| * If pid namespaces are enabled and the current task is in a child | |
| * pid_namespace, the command is handled by reboot_pid_ns() which will | |
| * call do_exit(). | |
| */ | |
| ret = reboot_pid_ns(pid_ns, cmd); | |
| if (ret) | |
| return ret; | |
| /* Instead of trying to make the power_off code look like | |
| * halt when pm_power_off is not set do it the easy way. | |
| */ | |
| if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !kernel_can_power_off()) { | |
| poweroff_fallback_to_halt = true; | |
| cmd = LINUX_REBOOT_CMD_HALT; | |
| } | |
| mutex_lock(&system_transition_mutex); | |
| switch (cmd) { | |
| case LINUX_REBOOT_CMD_RESTART: | |
| kernel_restart(NULL); | |
| break; | |
| case LINUX_REBOOT_CMD_CAD_ON: | |
| C_A_D = 1; | |
| break; | |
| case LINUX_REBOOT_CMD_CAD_OFF: | |
| C_A_D = 0; | |
| break; | |
| case LINUX_REBOOT_CMD_HALT: | |
| kernel_halt(); | |
| do_exit(0); | |
| case LINUX_REBOOT_CMD_POWER_OFF: | |
| kernel_power_off(); | |
| do_exit(0); | |
| break; | |
| case LINUX_REBOOT_CMD_RESTART2: | |
| ret = strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1); | |
| if (ret < 0) { | |
| ret = -EFAULT; | |
| break; | |
| } | |
| buffer[sizeof(buffer) - 1] = '\0'; | |
| kernel_restart(buffer); | |
| break; | |
| #ifdef CONFIG_KEXEC_CORE | |
| case LINUX_REBOOT_CMD_KEXEC: | |
| ret = kernel_kexec(); | |
| break; | |
| #endif | |
| #ifdef CONFIG_HIBERNATION | |
| case LINUX_REBOOT_CMD_SW_SUSPEND: | |
| ret = hibernate(); | |
| break; | |
| #endif | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| mutex_unlock(&system_transition_mutex); | |
| return ret; | |
| } | |
| static void deferred_cad(struct work_struct *dummy) | |
| { | |
| kernel_restart(NULL); | |
| } | |
| /* | |
| * This function gets called by ctrl-alt-del - ie the keyboard interrupt. | |
| * As it's called within an interrupt, it may NOT sync: the only choice | |
| * is whether to reboot at once, or just ignore the ctrl-alt-del. | |
| */ | |
| void ctrl_alt_del(void) | |
| { | |
| static DECLARE_WORK(cad_work, deferred_cad); | |
| if (C_A_D) | |
| schedule_work(&cad_work); | |
| else | |
| kill_cad_pid(SIGINT, 1); | |
| } | |
| #define POWEROFF_CMD_PATH_LEN 256 | |
| static char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff"; | |
| static const char reboot_cmd[] = "/sbin/reboot"; | |
| static int run_cmd(const char *cmd) | |
| { | |
| char **argv; | |
| static char *envp[] = { | |
| "HOME=/", | |
| "PATH=/sbin:/bin:/usr/sbin:/usr/bin", | |
| NULL | |
| }; | |
| int ret; | |
| argv = argv_split(GFP_KERNEL, cmd, NULL); | |
| if (argv) { | |
| ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC); | |
| argv_free(argv); | |
| } else { | |
| ret = -ENOMEM; | |
| } | |
| return ret; | |
| } | |
| static int __orderly_reboot(void) | |
| { | |
| int ret; | |
| ret = run_cmd(reboot_cmd); | |
| if (ret) { | |
| pr_warn("Failed to start orderly reboot: forcing the issue\n"); | |
| emergency_sync(); | |
| kernel_restart(NULL); | |
| } | |
| return ret; | |
| } | |
| static int __orderly_poweroff(bool force) | |
| { | |
| int ret; | |
| ret = run_cmd(poweroff_cmd); | |
| if (ret && force) { | |
| pr_warn("Failed to start orderly shutdown: forcing the issue\n"); | |
| /* | |
| * I guess this should try to kick off some daemon to sync and | |
| * poweroff asap. Or not even bother syncing if we're doing an | |
| * emergency shutdown? | |
| */ | |
| emergency_sync(); | |
| kernel_power_off(); | |
| } | |
| return ret; | |
| } | |
| static bool poweroff_force; | |
| static void poweroff_work_func(struct work_struct *work) | |
| { | |
| __orderly_poweroff(poweroff_force); | |
| } | |
| static DECLARE_WORK(poweroff_work, poweroff_work_func); | |
| /** | |
| * orderly_poweroff - Trigger an orderly system poweroff | |
| * @force: force poweroff if command execution fails | |
| * | |
| * This may be called from any context to trigger a system shutdown. | |
| * If the orderly shutdown fails, it will force an immediate shutdown. | |
| */ | |
| void orderly_poweroff(bool force) | |
| { | |
| if (force) /* do not override the pending "true" */ | |
| poweroff_force = true; | |
| schedule_work(&poweroff_work); | |
| } | |
| EXPORT_SYMBOL_GPL(orderly_poweroff); | |
| static void reboot_work_func(struct work_struct *work) | |
| { | |
| __orderly_reboot(); | |
| } | |
| static DECLARE_WORK(reboot_work, reboot_work_func); | |
| /** | |
| * orderly_reboot - Trigger an orderly system reboot | |
| * | |
| * This may be called from any context to trigger a system reboot. | |
| * If the orderly reboot fails, it will force an immediate reboot. | |
| */ | |
| void orderly_reboot(void) | |
| { | |
| schedule_work(&reboot_work); | |
| } | |
| EXPORT_SYMBOL_GPL(orderly_reboot); | |
| static const char *hw_protection_action_str(enum hw_protection_action action) | |
| { | |
| switch (action) { | |
| case HWPROT_ACT_SHUTDOWN: | |
| return "shutdown"; | |
| case HWPROT_ACT_REBOOT: | |
| return "reboot"; | |
| default: | |
| return "undefined"; | |
| } | |
| } | |
| static enum hw_protection_action hw_failure_emergency_action; | |
| /** | |
| * hw_failure_emergency_action_func - emergency action work after a known delay | |
| * @work: work_struct associated with the emergency action function | |
| * | |
| * This function is called in very critical situations to force | |
| * a kernel poweroff or reboot after a configurable timeout value. | |
| */ | |
| static void hw_failure_emergency_action_func(struct work_struct *work) | |
| { | |
| const char *action_str = hw_protection_action_str(hw_failure_emergency_action); | |
| pr_emerg("Hardware protection timed-out. Trying forced %s\n", | |
| action_str); | |
| /* | |
| * We have reached here after the emergency action waiting period has | |
| * expired. This means orderly_poweroff/reboot has not been able to | |
| * shut off the system for some reason. | |
| * | |
| * Try to shut off the system immediately if possible | |
| */ | |
| if (hw_failure_emergency_action == HWPROT_ACT_REBOOT) | |
| kernel_restart(NULL); | |
| else | |
| kernel_power_off(); | |
| /* | |
| * Worst of the worst case trigger emergency restart | |
| */ | |
| pr_emerg("Hardware protection %s failed. Trying emergency restart\n", | |
| action_str); | |
| emergency_restart(); | |
| } | |
| static DECLARE_DELAYED_WORK(hw_failure_emergency_action_work, | |
| hw_failure_emergency_action_func); | |
| /** | |
| * hw_failure_emergency_schedule - Schedule an emergency system shutdown or reboot | |
| * | |
| * @action: The hardware protection action to be taken | |
| * @action_delay_ms: Time in milliseconds to elapse before triggering action | |
| * | |
| * This may be called from any critical situation to trigger a system shutdown | |
| * or reboot after a given period of time. | |
| * If time is negative this is not scheduled. | |
| */ | |
| static void hw_failure_emergency_schedule(enum hw_protection_action action, | |
| int action_delay_ms) | |
| { | |
| if (action_delay_ms <= 0) | |
| return; | |
| hw_failure_emergency_action = action; | |
| schedule_delayed_work(&hw_failure_emergency_action_work, | |
| msecs_to_jiffies(action_delay_ms)); | |
| } | |
| /** | |
| * __hw_protection_trigger - Trigger an emergency system shutdown or reboot | |
| * | |
| * @reason: Reason of emergency shutdown or reboot to be printed. | |
| * @ms_until_forced: Time to wait for orderly shutdown or reboot before | |
| * triggering it. Negative value disables the forced | |
| * shutdown or reboot. | |
| * @action: The hardware protection action to be taken. | |
| * | |
| * Initiate an emergency system shutdown or reboot in order to protect | |
| * hardware from further damage. Usage examples include a thermal protection. | |
| * NOTE: The request is ignored if protection shutdown or reboot is already | |
| * pending even if the previous request has given a large timeout for forced | |
| * shutdown/reboot. | |
| */ | |
| void __hw_protection_trigger(const char *reason, int ms_until_forced, | |
| enum hw_protection_action action) | |
| { | |
| static atomic_t allow_proceed = ATOMIC_INIT(1); | |
| if (action == HWPROT_ACT_DEFAULT) | |
| action = hw_protection_action; | |
| pr_emerg("HARDWARE PROTECTION %s (%s)\n", | |
| hw_protection_action_str(action), reason); | |
| /* Shutdown should be initiated only once. */ | |
| if (!atomic_dec_and_test(&allow_proceed)) | |
| return; | |
| /* | |
| * Queue a backup emergency shutdown in the event of | |
| * orderly_poweroff failure | |
| */ | |
| hw_failure_emergency_schedule(action, ms_until_forced); | |
| if (action == HWPROT_ACT_REBOOT) | |
| orderly_reboot(); | |
| else | |
| orderly_poweroff(true); | |
| } | |
| EXPORT_SYMBOL_GPL(__hw_protection_trigger); | |
| static bool hw_protection_action_parse(const char *str, | |
| enum hw_protection_action *action) | |
| { | |
| if (sysfs_streq(str, "shutdown")) | |
| *action = HWPROT_ACT_SHUTDOWN; | |
| else if (sysfs_streq(str, "reboot")) | |
| *action = HWPROT_ACT_REBOOT; | |
| else | |
| return false; | |
| return true; | |
| } | |
| static int __init hw_protection_setup(char *str) | |
| { | |
| hw_protection_action_parse(str, &hw_protection_action); | |
| return 1; | |
| } | |
| __setup("hw_protection=", hw_protection_setup); | |
| #ifdef CONFIG_SYSFS | |
| static ssize_t hw_protection_show(struct kobject *kobj, | |
| struct kobj_attribute *attr, char *buf) | |
| { | |
| return sysfs_emit(buf, "%s\n", | |
| hw_protection_action_str(hw_protection_action)); | |
| } | |
| static ssize_t hw_protection_store(struct kobject *kobj, | |
| struct kobj_attribute *attr, const char *buf, | |
| size_t count) | |
| { | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| if (!hw_protection_action_parse(buf, &hw_protection_action)) | |
| return -EINVAL; | |
| return count; | |
| } | |
| static struct kobj_attribute hw_protection_attr = __ATTR_RW(hw_protection); | |
| #endif | |
| static int __init reboot_setup(char *str) | |
| { | |
| for (;;) { | |
| enum reboot_mode *mode; | |
| /* | |
| * Having anything passed on the command line via | |
| * reboot= will cause us to disable DMI checking | |
| * below. | |
| */ | |
| reboot_default = 0; | |
| if (!strncmp(str, "panic_", 6)) { | |
| mode = &panic_reboot_mode; | |
| str += 6; | |
| } else { | |
| mode = &reboot_mode; | |
| } | |
| switch (*str) { | |
| case 'w': | |
| *mode = REBOOT_WARM; | |
| break; | |
| case 'c': | |
| *mode = REBOOT_COLD; | |
| break; | |
| case 'h': | |
| *mode = REBOOT_HARD; | |
| break; | |
| case 's': | |
| /* | |
| * reboot_cpu is s[mp]#### with #### being the processor | |
| * to be used for rebooting. Skip 's' or 'smp' prefix. | |
| */ | |
| str += str[1] == 'm' && str[2] == 'p' ? 3 : 1; | |
| if (isdigit(str[0])) { | |
| int cpu = simple_strtoul(str, NULL, 0); | |
| if (cpu >= num_possible_cpus()) { | |
| pr_err("Ignoring the CPU number in reboot= option. " | |
| "CPU %d exceeds possible cpu number %d\n", | |
| cpu, num_possible_cpus()); | |
| break; | |
| } | |
| reboot_cpu = cpu; | |
| } else | |
| *mode = REBOOT_SOFT; | |
| break; | |
| case 'g': | |
| *mode = REBOOT_GPIO; | |
| break; | |
| case 'b': | |
| case 'a': | |
| case 'k': | |
| case 't': | |
| case 'e': | |
| case 'p': | |
| reboot_type = *str; | |
| break; | |
| case 'f': | |
| reboot_force = 1; | |
| break; | |
| } | |
| str = strchr(str, ','); | |
| if (str) | |
| str++; | |
| else | |
| break; | |
| } | |
| return 1; | |
| } | |
| __setup("reboot=", reboot_setup); | |
| #ifdef CONFIG_SYSFS | |
| #define REBOOT_COLD_STR "cold" | |
| #define REBOOT_WARM_STR "warm" | |
| #define REBOOT_HARD_STR "hard" | |
| #define REBOOT_SOFT_STR "soft" | |
| #define REBOOT_GPIO_STR "gpio" | |
| #define REBOOT_UNDEFINED_STR "undefined" | |
| #define BOOT_TRIPLE_STR "triple" | |
| #define BOOT_KBD_STR "kbd" | |
| #define BOOT_BIOS_STR "bios" | |
| #define BOOT_ACPI_STR "acpi" | |
| #define BOOT_EFI_STR "efi" | |
| #define BOOT_PCI_STR "pci" | |
| static ssize_t mode_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) | |
| { | |
| const char *val; | |
| switch (reboot_mode) { | |
| case REBOOT_COLD: | |
| val = REBOOT_COLD_STR; | |
| break; | |
| case REBOOT_WARM: | |
| val = REBOOT_WARM_STR; | |
| break; | |
| case REBOOT_HARD: | |
| val = REBOOT_HARD_STR; | |
| break; | |
| case REBOOT_SOFT: | |
| val = REBOOT_SOFT_STR; | |
| break; | |
| case REBOOT_GPIO: | |
| val = REBOOT_GPIO_STR; | |
| break; | |
| default: | |
| val = REBOOT_UNDEFINED_STR; | |
| } | |
| return sysfs_emit(buf, "%s\n", val); | |
| } | |
| static ssize_t mode_store(struct kobject *kobj, struct kobj_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| if (!capable(CAP_SYS_BOOT)) | |
| return -EPERM; | |
| if (!strncmp(buf, REBOOT_COLD_STR, strlen(REBOOT_COLD_STR))) | |
| reboot_mode = REBOOT_COLD; | |
| else if (!strncmp(buf, REBOOT_WARM_STR, strlen(REBOOT_WARM_STR))) | |
| reboot_mode = REBOOT_WARM; | |
| else if (!strncmp(buf, REBOOT_HARD_STR, strlen(REBOOT_HARD_STR))) | |
| reboot_mode = REBOOT_HARD; | |
| else if (!strncmp(buf, REBOOT_SOFT_STR, strlen(REBOOT_SOFT_STR))) | |
| reboot_mode = REBOOT_SOFT; | |
| else if (!strncmp(buf, REBOOT_GPIO_STR, strlen(REBOOT_GPIO_STR))) | |
| reboot_mode = REBOOT_GPIO; | |
| else | |
| return -EINVAL; | |
| reboot_default = 0; | |
| return count; | |
| } | |
| static struct kobj_attribute reboot_mode_attr = __ATTR_RW(mode); | |
| #ifdef CONFIG_X86 | |
| static ssize_t force_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) | |
| { | |
| return sysfs_emit(buf, "%d\n", reboot_force); | |
| } | |
| static ssize_t force_store(struct kobject *kobj, struct kobj_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| bool res; | |
| if (!capable(CAP_SYS_BOOT)) | |
| return -EPERM; | |
| if (kstrtobool(buf, &res)) | |
| return -EINVAL; | |
| reboot_default = 0; | |
| reboot_force = res; | |
| return count; | |
| } | |
| static struct kobj_attribute reboot_force_attr = __ATTR_RW(force); | |
| static ssize_t type_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) | |
| { | |
| const char *val; | |
| switch (reboot_type) { | |
| case BOOT_TRIPLE: | |
| val = BOOT_TRIPLE_STR; | |
| break; | |
| case BOOT_KBD: | |
| val = BOOT_KBD_STR; | |
| break; | |
| case BOOT_BIOS: | |
| val = BOOT_BIOS_STR; | |
| break; | |
| case BOOT_ACPI: | |
| val = BOOT_ACPI_STR; | |
| break; | |
| case BOOT_EFI: | |
| val = BOOT_EFI_STR; | |
| break; | |
| case BOOT_CF9_FORCE: | |
| val = BOOT_PCI_STR; | |
| break; | |
| default: | |
| val = REBOOT_UNDEFINED_STR; | |
| } | |
| return sysfs_emit(buf, "%s\n", val); | |
| } | |
| static ssize_t type_store(struct kobject *kobj, struct kobj_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| if (!capable(CAP_SYS_BOOT)) | |
| return -EPERM; | |
| if (!strncmp(buf, BOOT_TRIPLE_STR, strlen(BOOT_TRIPLE_STR))) | |
| reboot_type = BOOT_TRIPLE; | |
| else if (!strncmp(buf, BOOT_KBD_STR, strlen(BOOT_KBD_STR))) | |
| reboot_type = BOOT_KBD; | |
| else if (!strncmp(buf, BOOT_BIOS_STR, strlen(BOOT_BIOS_STR))) | |
| reboot_type = BOOT_BIOS; | |
| else if (!strncmp(buf, BOOT_ACPI_STR, strlen(BOOT_ACPI_STR))) | |
| reboot_type = BOOT_ACPI; | |
| else if (!strncmp(buf, BOOT_EFI_STR, strlen(BOOT_EFI_STR))) | |
| reboot_type = BOOT_EFI; | |
| else if (!strncmp(buf, BOOT_PCI_STR, strlen(BOOT_PCI_STR))) | |
| reboot_type = BOOT_CF9_FORCE; | |
| else | |
| return -EINVAL; | |
| reboot_default = 0; | |
| return count; | |
| } | |
| static struct kobj_attribute reboot_type_attr = __ATTR_RW(type); | |
| #endif | |
| #ifdef CONFIG_SMP | |
| static ssize_t cpu_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) | |
| { | |
| return sysfs_emit(buf, "%d\n", reboot_cpu); | |
| } | |
| static ssize_t cpu_store(struct kobject *kobj, struct kobj_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int cpunum; | |
| int rc; | |
| if (!capable(CAP_SYS_BOOT)) | |
| return -EPERM; | |
| rc = kstrtouint(buf, 0, &cpunum); | |
| if (rc) | |
| return rc; | |
| if (cpunum >= num_possible_cpus()) | |
| return -ERANGE; | |
| reboot_default = 0; | |
| reboot_cpu = cpunum; | |
| return count; | |
| } | |
| static struct kobj_attribute reboot_cpu_attr = __ATTR_RW(cpu); | |
| #endif | |
| static struct attribute *reboot_attrs[] = { | |
| &hw_protection_attr.attr, | |
| &reboot_mode_attr.attr, | |
| #ifdef CONFIG_X86 | |
| &reboot_force_attr.attr, | |
| &reboot_type_attr.attr, | |
| #endif | |
| #ifdef CONFIG_SMP | |
| &reboot_cpu_attr.attr, | |
| #endif | |
| NULL, | |
| }; | |
| #ifdef CONFIG_SYSCTL | |
| static int proc_do_cad_pid(const struct ctl_table *table, int write, void *buffer, | |
| size_t *lenp, loff_t *ppos) | |
| { | |
| struct ctl_table tmp_table = *table; | |
| struct pid *new_pid; | |
| struct pid *old_pid; | |
| pid_t tmp_pid; | |
| int r; | |
| rcu_read_lock(); | |
| tmp_pid = pid_vnr(rcu_dereference(cad_pid)); | |
| rcu_read_unlock(); | |
| tmp_table.data = &tmp_pid; | |
| r = proc_dointvec(&tmp_table, write, buffer, lenp, ppos); | |
| if (r || !write) | |
| return r; | |
| new_pid = find_get_pid(tmp_pid); | |
| if (!new_pid) | |
| return -ESRCH; | |
| old_pid = unrcu_pointer(xchg(&cad_pid, RCU_INITIALIZER(new_pid))); | |
| /* | |
| * Wait for cad_pid readers before put_pid(). We cannot use | |
| * call_rcu() here because free_pid() already owns pid->rcu. | |
| */ | |
| synchronize_rcu(); | |
| put_pid(old_pid); | |
| return 0; | |
| } | |
| static const struct ctl_table kern_reboot_table[] = { | |
| { | |
| .procname = "poweroff_cmd", | |
| .data = &poweroff_cmd, | |
| .maxlen = POWEROFF_CMD_PATH_LEN, | |
| .mode = 0644, | |
| .proc_handler = proc_dostring, | |
| }, | |
| { | |
| .procname = "ctrl-alt-del", | |
| .data = &C_A_D, | |
| .maxlen = sizeof(int), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec, | |
| }, | |
| { | |
| .procname = "cad_pid", | |
| .maxlen = sizeof(int), | |
| .mode = 0600, | |
| .proc_handler = proc_do_cad_pid, | |
| }, | |
| }; | |
| static void __init kernel_reboot_sysctls_init(void) | |
| { | |
| register_sysctl_init("kernel", kern_reboot_table); | |
| } | |
| #else | |
| #define kernel_reboot_sysctls_init() do { } while (0) | |
| #endif /* CONFIG_SYSCTL */ | |
| static const struct attribute_group reboot_attr_group = { | |
| .attrs = reboot_attrs, | |
| }; | |
| static int __init reboot_ksysfs_init(void) | |
| { | |
| struct kobject *reboot_kobj; | |
| int ret; | |
| reboot_kobj = kobject_create_and_add("reboot", kernel_kobj); | |
| if (!reboot_kobj) | |
| return -ENOMEM; | |
| ret = sysfs_create_group(reboot_kobj, &reboot_attr_group); | |
| if (ret) { | |
| kobject_put(reboot_kobj); | |
| return ret; | |
| } | |
| kernel_reboot_sysctls_init(); | |
| return 0; | |
| } | |
| late_initcall(reboot_ksysfs_init); | |
| #endif |