| // SPDX-License-Identifier: GPL-2.0-only | |
| #include <linux/bitmap.h> | |
| #include <linux/bug.h> | |
| #include <linux/export.h> | |
| #include <linux/idr.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/xarray.h> | |
| /** | |
| * idr_alloc_u32() - Allocate an ID. | |
| * @idr: IDR handle. | |
| * @ptr: Pointer to be associated with the new ID. | |
| * @nextid: Pointer to an ID. | |
| * @max: The maximum ID to allocate (inclusive). | |
| * @gfp: Memory allocation flags. | |
| * | |
| * Allocates an unused ID in the range specified by @nextid and @max. | |
| * Note that @max is inclusive whereas the @end parameter to idr_alloc() | |
| * is exclusive. The new ID is assigned to @nextid before the pointer | |
| * is inserted into the IDR, so if @nextid points into the object pointed | |
| * to by @ptr, a concurrent lookup will not find an uninitialised ID. | |
| * | |
| * The caller should provide their own locking to ensure that two | |
| * concurrent modifications to the IDR are not possible. Read-only | |
| * accesses to the IDR may be done under the RCU read lock or may | |
| * exclude simultaneous writers. | |
| * | |
| * Return: 0 if an ID was allocated, -ENOMEM if memory allocation failed, | |
| * or -ENOSPC if no free IDs could be found. If an error occurred, | |
| * @nextid is unchanged. | |
| */ | |
| int idr_alloc_u32(struct idr *idr, void *ptr, u32 *nextid, | |
| unsigned long max, gfp_t gfp) | |
| { | |
| struct radix_tree_iter iter; | |
| void __rcu **slot; | |
| unsigned int base = idr->idr_base; | |
| unsigned int id = *nextid; | |
| if (WARN_ON_ONCE(!(idr->idr_rt.xa_flags & ROOT_IS_IDR))) | |
| idr->idr_rt.xa_flags |= IDR_RT_MARKER; | |
| if (max < base) | |
| return -ENOSPC; | |
| id = (id < base) ? 0 : id - base; | |
| radix_tree_iter_init(&iter, id); | |
| slot = idr_get_free(&idr->idr_rt, &iter, gfp, max - base); | |
| if (IS_ERR(slot)) | |
| return PTR_ERR(slot); | |
| *nextid = iter.index + base; | |
| /* there is a memory barrier inside radix_tree_iter_replace() */ | |
| radix_tree_iter_replace(&idr->idr_rt, &iter, slot, ptr); | |
| radix_tree_iter_tag_clear(&idr->idr_rt, &iter, IDR_FREE); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(idr_alloc_u32); | |
| /** | |
| * idr_alloc() - Allocate an ID. | |
| * @idr: IDR handle. | |
| * @ptr: Pointer to be associated with the new ID. | |
| * @start: The minimum ID (inclusive). | |
| * @end: The maximum ID (exclusive). | |
| * @gfp: Memory allocation flags. | |
| * | |
| * Allocates an unused ID in the range specified by @start and @end. If | |
| * @end is <= 0, it is treated as one larger than %INT_MAX. This allows | |
| * callers to use @start + N as @end as long as N is within integer range. | |
| * | |
| * The caller should provide their own locking to ensure that two | |
| * concurrent modifications to the IDR are not possible. Read-only | |
| * accesses to the IDR may be done under the RCU read lock or may | |
| * exclude simultaneous writers. | |
| * | |
| * Return: The newly allocated ID, -ENOMEM if memory allocation failed, | |
| * or -ENOSPC if no free IDs could be found. | |
| */ | |
| int idr_alloc(struct idr *idr, void *ptr, int start, int end, gfp_t gfp) | |
| { | |
| u32 id = start; | |
| int ret; | |
| if (WARN_ON_ONCE(start < 0)) | |
| return -EINVAL; | |
| ret = idr_alloc_u32(idr, ptr, &id, end > 0 ? end - 1 : INT_MAX, gfp); | |
| if (ret) | |
| return ret; | |
| return id; | |
| } | |
| EXPORT_SYMBOL_GPL(idr_alloc); | |
| /** | |
| * idr_alloc_cyclic() - Allocate an ID cyclically. | |
| * @idr: IDR handle. | |
| * @ptr: Pointer to be associated with the new ID. | |
| * @start: The minimum ID (inclusive). | |
| * @end: The maximum ID (exclusive). | |
| * @gfp: Memory allocation flags. | |
| * | |
| * Allocates an unused ID in the range specified by @start and @end. If | |
| * @end is <= 0, it is treated as one larger than %INT_MAX. This allows | |
| * callers to use @start + N as @end as long as N is within integer range. | |
| * The search for an unused ID will start at the last ID allocated and will | |
| * wrap around to @start if no free IDs are found before reaching @end. | |
| * | |
| * The caller should provide their own locking to ensure that two | |
| * concurrent modifications to the IDR are not possible. Read-only | |
| * accesses to the IDR may be done under the RCU read lock or may | |
| * exclude simultaneous writers. | |
| * | |
| * Return: The newly allocated ID, -ENOMEM if memory allocation failed, | |
| * or -ENOSPC if no free IDs could be found. | |
| */ | |
| int idr_alloc_cyclic(struct idr *idr, void *ptr, int start, int end, gfp_t gfp) | |
| { | |
| u32 id = idr->idr_next; | |
| int err, max = end > 0 ? end - 1 : INT_MAX; | |
| if ((int)id < start) | |
| id = start; | |
| err = idr_alloc_u32(idr, ptr, &id, max, gfp); | |
| if ((err == -ENOSPC) && (id > start)) { | |
| id = start; | |
| err = idr_alloc_u32(idr, ptr, &id, max, gfp); | |
| } | |
| if (err) | |
| return err; | |
| idr->idr_next = id + 1; | |
| return id; | |
| } | |
| EXPORT_SYMBOL(idr_alloc_cyclic); | |
| /** | |
| * idr_remove() - Remove an ID from the IDR. | |
| * @idr: IDR handle. | |
| * @id: Pointer ID. | |
| * | |
| * Removes this ID from the IDR. If the ID was not previously in the IDR, | |
| * this function returns %NULL. | |
| * | |
| * Since this function modifies the IDR, the caller should provide their | |
| * own locking to ensure that concurrent modification of the same IDR is | |
| * not possible. | |
| * | |
| * Return: The pointer formerly associated with this ID. | |
| */ | |
| void *idr_remove(struct idr *idr, unsigned long id) | |
| { | |
| return radix_tree_delete_item(&idr->idr_rt, id - idr->idr_base, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(idr_remove); | |
| /** | |
| * idr_find() - Return pointer for given ID. | |
| * @idr: IDR handle. | |
| * @id: Pointer ID. | |
| * | |
| * Looks up the pointer associated with this ID. A %NULL pointer may | |
| * indicate that @id is not allocated or that the %NULL pointer was | |
| * associated with this ID. | |
| * | |
| * This function can be called under rcu_read_lock(), given that the leaf | |
| * pointers lifetimes are correctly managed. | |
| * | |
| * Return: The pointer associated with this ID. | |
| */ | |
| void *idr_find(const struct idr *idr, unsigned long id) | |
| { | |
| return radix_tree_lookup(&idr->idr_rt, id - idr->idr_base); | |
| } | |
| EXPORT_SYMBOL_GPL(idr_find); | |
| /** | |
| * idr_for_each() - Iterate through all stored pointers. | |
| * @idr: IDR handle. | |
| * @fn: Function to be called for each pointer. | |
| * @data: Data passed to callback function. | |
| * | |
| * The callback function will be called for each entry in @idr, passing | |
| * the ID, the entry and @data. | |
| * | |
| * If @fn returns anything other than %0, the iteration stops and that | |
| * value is returned from this function. | |
| * | |
| * idr_for_each() can be called concurrently with idr_alloc() and | |
| * idr_remove() if protected by RCU. Newly added entries may not be | |
| * seen and deleted entries may be seen, but adding and removing entries | |
| * will not cause other entries to be skipped, nor spurious ones to be seen. | |
| */ | |
| int idr_for_each(const struct idr *idr, | |
| int (*fn)(int id, void *p, void *data), void *data) | |
| { | |
| struct radix_tree_iter iter; | |
| void __rcu **slot; | |
| int base = idr->idr_base; | |
| radix_tree_for_each_slot(slot, &idr->idr_rt, &iter, 0) { | |
| int ret; | |
| unsigned long id = iter.index + base; | |
| if (WARN_ON_ONCE(id > INT_MAX)) | |
| break; | |
| ret = fn(id, rcu_dereference_raw(*slot), data); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(idr_for_each); | |
| /** | |
| * idr_get_next_ul() - Find next populated entry. | |
| * @idr: IDR handle. | |
| * @nextid: Pointer to an ID. | |
| * | |
| * Returns the next populated entry in the tree with an ID greater than | |
| * or equal to the value pointed to by @nextid. On exit, @nextid is updated | |
| * to the ID of the found value. To use in a loop, the value pointed to by | |
| * nextid must be incremented by the user. | |
| */ | |
| void *idr_get_next_ul(struct idr *idr, unsigned long *nextid) | |
| { | |
| struct radix_tree_iter iter; | |
| void __rcu **slot; | |
| void *entry = NULL; | |
| unsigned long base = idr->idr_base; | |
| unsigned long id = *nextid; | |
| id = (id < base) ? 0 : id - base; | |
| radix_tree_for_each_slot(slot, &idr->idr_rt, &iter, id) { | |
| entry = rcu_dereference_raw(*slot); | |
| if (!entry) | |
| continue; | |
| if (!xa_is_internal(entry)) | |
| break; | |
| if (slot != &idr->idr_rt.xa_head && !xa_is_retry(entry)) | |
| break; | |
| slot = radix_tree_iter_retry(&iter); | |
| } | |
| if (!slot) | |
| return NULL; | |
| *nextid = iter.index + base; | |
| return entry; | |
| } | |
| EXPORT_SYMBOL(idr_get_next_ul); | |
| /** | |
| * idr_get_next() - Find next populated entry. | |
| * @idr: IDR handle. | |
| * @nextid: Pointer to an ID. | |
| * | |
| * Returns the next populated entry in the tree with an ID greater than | |
| * or equal to the value pointed to by @nextid. On exit, @nextid is updated | |
| * to the ID of the found value. To use in a loop, the value pointed to by | |
| * nextid must be incremented by the user. | |
| */ | |
| void *idr_get_next(struct idr *idr, int *nextid) | |
| { | |
| unsigned long id = *nextid; | |
| void *entry = idr_get_next_ul(idr, &id); | |
| if (WARN_ON_ONCE(id > INT_MAX)) | |
| return NULL; | |
| *nextid = id; | |
| return entry; | |
| } | |
| EXPORT_SYMBOL(idr_get_next); | |
| /** | |
| * idr_replace() - replace pointer for given ID. | |
| * @idr: IDR handle. | |
| * @ptr: New pointer to associate with the ID. | |
| * @id: ID to change. | |
| * | |
| * Replace the pointer registered with an ID and return the old value. | |
| * This function can be called under the RCU read lock concurrently with | |
| * idr_alloc() and idr_remove() (as long as the ID being removed is not | |
| * the one being replaced!). | |
| * | |
| * Returns: the old value on success. %-ENOENT indicates that @id was not | |
| * found. %-EINVAL indicates that @ptr was not valid. | |
| */ | |
| void *idr_replace(struct idr *idr, void *ptr, unsigned long id) | |
| { | |
| struct radix_tree_node *node; | |
| void __rcu **slot = NULL; | |
| void *entry; | |
| id -= idr->idr_base; | |
| entry = __radix_tree_lookup(&idr->idr_rt, id, &node, &slot); | |
| if (!slot || radix_tree_tag_get(&idr->idr_rt, id, IDR_FREE)) | |
| return ERR_PTR(-ENOENT); | |
| __radix_tree_replace(&idr->idr_rt, node, slot, ptr); | |
| return entry; | |
| } | |
| EXPORT_SYMBOL(idr_replace); | |
| /** | |
| * DOC: IDA description | |
| * | |
| * The IDA is an ID allocator which does not provide the ability to | |
| * associate an ID with a pointer. As such, it only needs to store one | |
| * bit per ID, and so is more space efficient than an IDR. To use an IDA, | |
| * define it using DEFINE_IDA() (or embed a &struct ida in a data structure, | |
| * then initialise it using ida_init()). To allocate a new ID, call | |
| * ida_alloc(), ida_alloc_min(), ida_alloc_max() or ida_alloc_range(). | |
| * To free an ID, call ida_free(). | |
| * | |
| * ida_destroy() can be used to dispose of an IDA without needing to | |
| * free the individual IDs in it. You can use ida_is_empty() to find | |
| * out whether the IDA has any IDs currently allocated. | |
| * | |
| * The IDA handles its own locking. It is safe to call any of the IDA | |
| * functions without synchronisation in your code. | |
| * | |
| * IDs are currently limited to the range [0-INT_MAX]. If this is an awkward | |
| * limitation, it should be quite straightforward to raise the maximum. | |
| */ | |
| /* | |
| * Developer's notes: | |
| * | |
| * The IDA uses the functionality provided by the XArray to store bitmaps in | |
| * each entry. The XA_FREE_MARK is only cleared when all bits in the bitmap | |
| * have been set. | |
| * | |
| * I considered telling the XArray that each slot is an order-10 node | |
| * and indexing by bit number, but the XArray can't allow a single multi-index | |
| * entry in the head, which would significantly increase memory consumption | |
| * for the IDA. So instead we divide the index by the number of bits in the | |
| * leaf bitmap before doing a radix tree lookup. | |
| * | |
| * As an optimisation, if there are only a few low bits set in any given | |
| * leaf, instead of allocating a 128-byte bitmap, we store the bits | |
| * as a value entry. Value entries never have the XA_FREE_MARK cleared | |
| * because we can always convert them into a bitmap entry. | |
| * | |
| * It would be possible to optimise further; once we've run out of a | |
| * single 128-byte bitmap, we currently switch to a 576-byte node, put | |
| * the 128-byte bitmap in the first entry and then start allocating extra | |
| * 128-byte entries. We could instead use the 512 bytes of the node's | |
| * data as a bitmap before moving to that scheme. I do not believe this | |
| * is a worthwhile optimisation; Rasmus Villemoes surveyed the current | |
| * users of the IDA and almost none of them use more than 1024 entries. | |
| * Those that do use more than the 8192 IDs that the 512 bytes would | |
| * provide. | |
| * | |
| * The IDA always uses a lock to alloc/free. If we add a 'test_bit' | |
| * equivalent, it will still need locking. Going to RCU lookup would require | |
| * using RCU to free bitmaps, and that's not trivial without embedding an | |
| * RCU head in the bitmap, which adds a 2-pointer overhead to each 128-byte | |
| * bitmap, which is excessive. | |
| */ | |
| /** | |
| * ida_alloc_range() - Allocate an unused ID. | |
| * @ida: IDA handle. | |
| * @min: Lowest ID to allocate. | |
| * @max: Highest ID to allocate. | |
| * @gfp: Memory allocation flags. | |
| * | |
| * Allocate an ID between @min and @max, inclusive. The allocated ID will | |
| * not exceed %INT_MAX, even if @max is larger. | |
| * | |
| * Context: Any context. It is safe to call this function without | |
| * locking in your code. | |
| * Return: The allocated ID, or %-ENOMEM if memory could not be allocated, | |
| * or %-ENOSPC if there are no free IDs. | |
| */ | |
| int ida_alloc_range(struct ida *ida, unsigned int min, unsigned int max, | |
| gfp_t gfp) | |
| { | |
| XA_STATE(xas, &ida->xa, min / IDA_BITMAP_BITS); | |
| unsigned bit = min % IDA_BITMAP_BITS; | |
| unsigned long flags; | |
| struct ida_bitmap *bitmap, *alloc = NULL; | |
| if ((int)min < 0) | |
| return -ENOSPC; | |
| if ((int)max < 0) | |
| max = INT_MAX; | |
| retry: | |
| xas_lock_irqsave(&xas, flags); | |
| next: | |
| bitmap = xas_find_marked(&xas, max / IDA_BITMAP_BITS, XA_FREE_MARK); | |
| if (xas.xa_index > min / IDA_BITMAP_BITS) | |
| bit = 0; | |
| if (xas.xa_index * IDA_BITMAP_BITS + bit > max) | |
| goto nospc; | |
| if (xa_is_value(bitmap)) { | |
| unsigned long tmp = xa_to_value(bitmap); | |
| if (bit < BITS_PER_XA_VALUE) { | |
| bit = find_next_zero_bit(&tmp, BITS_PER_XA_VALUE, bit); | |
| if (xas.xa_index * IDA_BITMAP_BITS + bit > max) | |
| goto nospc; | |
| if (bit < BITS_PER_XA_VALUE) { | |
| tmp |= 1UL << bit; | |
| xas_store(&xas, xa_mk_value(tmp)); | |
| goto out; | |
| } | |
| } | |
| bitmap = alloc; | |
| if (!bitmap) | |
| bitmap = kzalloc_obj(*bitmap, GFP_NOWAIT); | |
| if (!bitmap) | |
| goto alloc; | |
| bitmap->bitmap[0] = tmp; | |
| xas_store(&xas, bitmap); | |
| if (xas_error(&xas)) { | |
| bitmap->bitmap[0] = 0; | |
| goto out; | |
| } | |
| } | |
| if (bitmap) { | |
| bit = find_next_zero_bit(bitmap->bitmap, IDA_BITMAP_BITS, bit); | |
| if (xas.xa_index * IDA_BITMAP_BITS + bit > max) | |
| goto nospc; | |
| if (bit == IDA_BITMAP_BITS) | |
| goto next; | |
| __set_bit(bit, bitmap->bitmap); | |
| if (bitmap_full(bitmap->bitmap, IDA_BITMAP_BITS)) | |
| xas_clear_mark(&xas, XA_FREE_MARK); | |
| } else { | |
| if (bit < BITS_PER_XA_VALUE) { | |
| bitmap = xa_mk_value(1UL << bit); | |
| } else { | |
| bitmap = alloc; | |
| if (!bitmap) | |
| bitmap = kzalloc_obj(*bitmap, GFP_NOWAIT); | |
| if (!bitmap) | |
| goto alloc; | |
| __set_bit(bit, bitmap->bitmap); | |
| } | |
| xas_store(&xas, bitmap); | |
| } | |
| out: | |
| xas_unlock_irqrestore(&xas, flags); | |
| if (xas_nomem(&xas, gfp)) { | |
| xas.xa_index = min / IDA_BITMAP_BITS; | |
| bit = min % IDA_BITMAP_BITS; | |
| goto retry; | |
| } | |
| if (bitmap != alloc) | |
| kfree(alloc); | |
| if (xas_error(&xas)) | |
| return xas_error(&xas); | |
| return xas.xa_index * IDA_BITMAP_BITS + bit; | |
| alloc: | |
| xas_unlock_irqrestore(&xas, flags); | |
| alloc = kzalloc_obj(*bitmap, gfp); | |
| if (!alloc) | |
| return -ENOMEM; | |
| xas_set(&xas, min / IDA_BITMAP_BITS); | |
| bit = min % IDA_BITMAP_BITS; | |
| goto retry; | |
| nospc: | |
| xas_unlock_irqrestore(&xas, flags); | |
| kfree(alloc); | |
| return -ENOSPC; | |
| } | |
| EXPORT_SYMBOL(ida_alloc_range); | |
| /** | |
| * ida_find_first_range - Get the lowest used ID. | |
| * @ida: IDA handle. | |
| * @min: Lowest ID to get. | |
| * @max: Highest ID to get. | |
| * | |
| * Get the lowest used ID between @min and @max, inclusive. The returned | |
| * ID will not exceed %INT_MAX, even if @max is larger. | |
| * | |
| * Context: Any context. Takes and releases the xa_lock. | |
| * Return: The lowest used ID, or errno if no used ID is found. | |
| */ | |
| int ida_find_first_range(struct ida *ida, unsigned int min, unsigned int max) | |
| { | |
| unsigned long index = min / IDA_BITMAP_BITS; | |
| unsigned int offset = min % IDA_BITMAP_BITS; | |
| unsigned long *addr, size, bit; | |
| unsigned long tmp = 0; | |
| unsigned long flags; | |
| void *entry; | |
| int ret; | |
| if ((int)min < 0) | |
| return -EINVAL; | |
| if ((int)max < 0) | |
| max = INT_MAX; | |
| xa_lock_irqsave(&ida->xa, flags); | |
| entry = xa_find(&ida->xa, &index, max / IDA_BITMAP_BITS, XA_PRESENT); | |
| if (!entry) { | |
| ret = -ENOENT; | |
| goto err_unlock; | |
| } | |
| if (index > min / IDA_BITMAP_BITS) | |
| offset = 0; | |
| if (index * IDA_BITMAP_BITS + offset > max) { | |
| ret = -ENOENT; | |
| goto err_unlock; | |
| } | |
| if (xa_is_value(entry)) { | |
| tmp = xa_to_value(entry); | |
| addr = &tmp; | |
| size = BITS_PER_XA_VALUE; | |
| } else { | |
| addr = ((struct ida_bitmap *)entry)->bitmap; | |
| size = IDA_BITMAP_BITS; | |
| } | |
| bit = find_next_bit(addr, size, offset); | |
| xa_unlock_irqrestore(&ida->xa, flags); | |
| if (bit == size || | |
| index * IDA_BITMAP_BITS + bit > max) | |
| return -ENOENT; | |
| return index * IDA_BITMAP_BITS + bit; | |
| err_unlock: | |
| xa_unlock_irqrestore(&ida->xa, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ida_find_first_range); | |
| /** | |
| * ida_free() - Release an allocated ID. | |
| * @ida: IDA handle. | |
| * @id: Previously allocated ID. | |
| * | |
| * Context: Any context. It is safe to call this function without | |
| * locking in your code. | |
| */ | |
| void ida_free(struct ida *ida, unsigned int id) | |
| { | |
| XA_STATE(xas, &ida->xa, id / IDA_BITMAP_BITS); | |
| unsigned bit = id % IDA_BITMAP_BITS; | |
| struct ida_bitmap *bitmap; | |
| unsigned long flags; | |
| if ((int)id < 0) | |
| return; | |
| xas_lock_irqsave(&xas, flags); | |
| bitmap = xas_load(&xas); | |
| if (xa_is_value(bitmap)) { | |
| unsigned long v = xa_to_value(bitmap); | |
| if (bit >= BITS_PER_XA_VALUE) | |
| goto err; | |
| if (!(v & (1UL << bit))) | |
| goto err; | |
| v &= ~(1UL << bit); | |
| if (!v) | |
| goto delete; | |
| xas_store(&xas, xa_mk_value(v)); | |
| } else { | |
| if (!bitmap || !test_bit(bit, bitmap->bitmap)) | |
| goto err; | |
| __clear_bit(bit, bitmap->bitmap); | |
| xas_set_mark(&xas, XA_FREE_MARK); | |
| if (bitmap_empty(bitmap->bitmap, IDA_BITMAP_BITS)) { | |
| kfree(bitmap); | |
| delete: | |
| xas_store(&xas, NULL); | |
| } | |
| } | |
| xas_unlock_irqrestore(&xas, flags); | |
| return; | |
| err: | |
| xas_unlock_irqrestore(&xas, flags); | |
| WARN(1, "ida_free called for id=%d which is not allocated.\n", id); | |
| } | |
| EXPORT_SYMBOL(ida_free); | |
| /** | |
| * ida_destroy() - Free all IDs. | |
| * @ida: IDA handle. | |
| * | |
| * Calling this function frees all IDs and releases all resources used | |
| * by an IDA. When this call returns, the IDA is empty and can be reused | |
| * or freed. If the IDA is already empty, there is no need to call this | |
| * function. | |
| * | |
| * Context: Any context. It is safe to call this function without | |
| * locking in your code. | |
| */ | |
| void ida_destroy(struct ida *ida) | |
| { | |
| XA_STATE(xas, &ida->xa, 0); | |
| struct ida_bitmap *bitmap; | |
| unsigned long flags; | |
| xas_lock_irqsave(&xas, flags); | |
| xas_for_each(&xas, bitmap, ULONG_MAX) { | |
| if (!xa_is_value(bitmap)) | |
| kfree(bitmap); | |
| xas_store(&xas, NULL); | |
| } | |
| xas_unlock_irqrestore(&xas, flags); | |
| } | |
| EXPORT_SYMBOL(ida_destroy); | |
| #ifndef __KERNEL__ | |
| extern void xa_dump_index(unsigned long index, unsigned int shift); | |
| #define IDA_CHUNK_SHIFT ilog2(IDA_BITMAP_BITS) | |
| static void ida_dump_entry(void *entry, unsigned long index) | |
| { | |
| unsigned long i; | |
| if (!entry) | |
| return; | |
| if (xa_is_node(entry)) { | |
| struct xa_node *node = xa_to_node(entry); | |
| unsigned int shift = node->shift + IDA_CHUNK_SHIFT + | |
| XA_CHUNK_SHIFT; | |
| xa_dump_index(index * IDA_BITMAP_BITS, shift); | |
| xa_dump_node(node); | |
| for (i = 0; i < XA_CHUNK_SIZE; i++) | |
| ida_dump_entry(node->slots[i], | |
| index | (i << node->shift)); | |
| } else if (xa_is_value(entry)) { | |
| xa_dump_index(index * IDA_BITMAP_BITS, ilog2(BITS_PER_LONG)); | |
| pr_cont("value: data %lx [%px]\n", xa_to_value(entry), entry); | |
| } else { | |
| struct ida_bitmap *bitmap = entry; | |
| xa_dump_index(index * IDA_BITMAP_BITS, IDA_CHUNK_SHIFT); | |
| pr_cont("bitmap: %p data", bitmap); | |
| for (i = 0; i < IDA_BITMAP_LONGS; i++) | |
| pr_cont(" %lx", bitmap->bitmap[i]); | |
| pr_cont("\n"); | |
| } | |
| } | |
| static void ida_dump(struct ida *ida) | |
| { | |
| struct xarray *xa = &ida->xa; | |
| pr_debug("ida: %p node %p free %d\n", ida, xa->xa_head, | |
| xa->xa_flags >> ROOT_TAG_SHIFT); | |
| ida_dump_entry(xa->xa_head, 0); | |
| } | |
| #endif |