| /* | |
| * net/tipc/msg.c: TIPC message header routines | |
| * | |
| * Copyright (c) 2000-2006, 2014-2015, Ericsson AB | |
| * Copyright (c) 2005, 2010-2011, Wind River Systems | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the names of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE | |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include <net/sock.h> | |
| #include "core.h" | |
| #include "msg.h" | |
| #include "addr.h" | |
| #include "name_table.h" | |
| #include "crypto.h" | |
| #define BUF_ALIGN(x) ALIGN(x, 4) | |
| #define MAX_FORWARD_SIZE 1024 | |
| #ifdef CONFIG_TIPC_CRYPTO | |
| #define BUF_HEADROOM ALIGN(((LL_MAX_HEADER + 48) + EHDR_MAX_SIZE), 16) | |
| #define BUF_OVERHEAD (BUF_HEADROOM + TIPC_AES_GCM_TAG_SIZE) | |
| #else | |
| #define BUF_HEADROOM (LL_MAX_HEADER + 48) | |
| #define BUF_OVERHEAD BUF_HEADROOM | |
| #endif | |
| const int one_page_mtu = PAGE_SIZE - SKB_DATA_ALIGN(BUF_OVERHEAD) - | |
| SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); | |
| /** | |
| * tipc_buf_acquire - creates a TIPC message buffer | |
| * @size: message size (including TIPC header) | |
| * @gfp: memory allocation flags | |
| * | |
| * Return: a new buffer with data pointers set to the specified size. | |
| * | |
| * NOTE: | |
| * Headroom is reserved to allow prepending of a data link header. | |
| * There may also be unrequested tailroom present at the buffer's end. | |
| */ | |
| struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp) | |
| { | |
| struct sk_buff *skb; | |
| skb = alloc_skb_fclone(BUF_OVERHEAD + size, gfp); | |
| if (skb) { | |
| skb_reserve(skb, BUF_HEADROOM); | |
| skb_put(skb, size); | |
| skb->next = NULL; | |
| } | |
| return skb; | |
| } | |
| void tipc_msg_init(u32 own_node, struct tipc_msg *m, u32 user, u32 type, | |
| u32 hsize, u32 dnode) | |
| { | |
| memset(m, 0, hsize); | |
| msg_set_version(m); | |
| msg_set_user(m, user); | |
| msg_set_hdr_sz(m, hsize); | |
| msg_set_size(m, hsize); | |
| msg_set_prevnode(m, own_node); | |
| msg_set_type(m, type); | |
| if (hsize > SHORT_H_SIZE) { | |
| msg_set_orignode(m, own_node); | |
| msg_set_destnode(m, dnode); | |
| } | |
| } | |
| struct sk_buff *tipc_msg_create(uint user, uint type, | |
| uint hdr_sz, uint data_sz, u32 dnode, | |
| u32 onode, u32 dport, u32 oport, int errcode) | |
| { | |
| struct tipc_msg *msg; | |
| struct sk_buff *buf; | |
| buf = tipc_buf_acquire(hdr_sz + data_sz, GFP_ATOMIC); | |
| if (unlikely(!buf)) | |
| return NULL; | |
| msg = buf_msg(buf); | |
| tipc_msg_init(onode, msg, user, type, hdr_sz, dnode); | |
| msg_set_size(msg, hdr_sz + data_sz); | |
| msg_set_origport(msg, oport); | |
| msg_set_destport(msg, dport); | |
| msg_set_errcode(msg, errcode); | |
| return buf; | |
| } | |
| /* tipc_buf_append(): Append a buffer to the fragment list of another buffer | |
| * @*headbuf: in: NULL for first frag, otherwise value returned from prev call | |
| * out: set when successful non-complete reassembly, otherwise NULL | |
| * @*buf: in: the buffer to append. Always defined | |
| * out: head buf after successful complete reassembly, otherwise NULL | |
| * Returns 1 when reassembly complete, otherwise 0 | |
| */ | |
| int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) | |
| { | |
| struct sk_buff *head = *headbuf; | |
| struct sk_buff *frag = *buf; | |
| struct sk_buff *tail = NULL; | |
| struct tipc_msg *msg; | |
| u32 fragid; | |
| int delta; | |
| bool headstolen; | |
| if (!frag) | |
| goto err; | |
| msg = buf_msg(frag); | |
| fragid = msg_type(msg); | |
| frag->next = NULL; | |
| skb_pull(frag, msg_hdr_sz(msg)); | |
| if (fragid == FIRST_FRAGMENT) { | |
| if (unlikely(head)) | |
| goto err; | |
| if (skb_has_frag_list(frag) && __skb_linearize(frag)) | |
| goto err; | |
| *buf = NULL; | |
| frag = skb_unshare(frag, GFP_ATOMIC); | |
| if (unlikely(!frag)) | |
| goto err; | |
| head = *headbuf = frag; | |
| TIPC_SKB_CB(head)->tail = NULL; | |
| return 0; | |
| } | |
| if (!head) | |
| goto err; | |
| /* Either the input skb ownership is transferred to headskb | |
| * or the input skb is freed, clear the reference to avoid | |
| * bad access on error path. | |
| */ | |
| *buf = NULL; | |
| if (skb_try_coalesce(head, frag, &headstolen, &delta)) { | |
| kfree_skb_partial(frag, headstolen); | |
| } else { | |
| tail = TIPC_SKB_CB(head)->tail; | |
| if (!skb_has_frag_list(head)) | |
| skb_shinfo(head)->frag_list = frag; | |
| else | |
| tail->next = frag; | |
| head->truesize += frag->truesize; | |
| head->data_len += frag->len; | |
| head->len += frag->len; | |
| TIPC_SKB_CB(head)->tail = frag; | |
| } | |
| if (fragid == LAST_FRAGMENT) { | |
| TIPC_SKB_CB(head)->validated = 0; | |
| /* If the reassembled skb has been freed in | |
| * tipc_msg_validate() because of an invalid truesize, | |
| * then head will point to a newly allocated reassembled | |
| * skb, while *headbuf points to freed reassembled skb. | |
| * In such cases, correct *headbuf for freeing the newly | |
| * allocated reassembled skb later. | |
| */ | |
| if (unlikely(!tipc_msg_validate(&head))) { | |
| if (head != *headbuf) | |
| *headbuf = head; | |
| goto err; | |
| } | |
| *buf = head; | |
| TIPC_SKB_CB(head)->tail = NULL; | |
| *headbuf = NULL; | |
| return 1; | |
| } | |
| return 0; | |
| err: | |
| kfree_skb(*buf); | |
| kfree_skb(*headbuf); | |
| *buf = *headbuf = NULL; | |
| return 0; | |
| } | |
| /** | |
| * tipc_msg_append(): Append data to tail of an existing buffer queue | |
| * @_hdr: header to be used | |
| * @m: the data to be appended | |
| * @mss: max allowable size of buffer | |
| * @dlen: size of data to be appended | |
| * @txq: queue to append to | |
| * | |
| * Return: the number of 1k blocks appended or errno value | |
| */ | |
| int tipc_msg_append(struct tipc_msg *_hdr, struct msghdr *m, int dlen, | |
| int mss, struct sk_buff_head *txq) | |
| { | |
| struct sk_buff *skb; | |
| int accounted, total, curr; | |
| int mlen, cpy, rem = dlen; | |
| struct tipc_msg *hdr; | |
| skb = skb_peek_tail(txq); | |
| accounted = skb ? msg_blocks(buf_msg(skb)) : 0; | |
| total = accounted; | |
| do { | |
| if (!skb || skb->len >= mss) { | |
| skb = tipc_buf_acquire(mss, GFP_KERNEL); | |
| if (unlikely(!skb)) | |
| return -ENOMEM; | |
| skb_orphan(skb); | |
| skb_trim(skb, MIN_H_SIZE); | |
| hdr = buf_msg(skb); | |
| skb_copy_to_linear_data(skb, _hdr, MIN_H_SIZE); | |
| msg_set_hdr_sz(hdr, MIN_H_SIZE); | |
| msg_set_size(hdr, MIN_H_SIZE); | |
| __skb_queue_tail(txq, skb); | |
| total += 1; | |
| } | |
| hdr = buf_msg(skb); | |
| curr = msg_blocks(hdr); | |
| mlen = msg_size(hdr); | |
| cpy = min_t(size_t, rem, mss - mlen); | |
| if (cpy != copy_from_iter(skb->data + mlen, cpy, &m->msg_iter)) | |
| return -EFAULT; | |
| msg_set_size(hdr, mlen + cpy); | |
| skb_put(skb, cpy); | |
| rem -= cpy; | |
| total += msg_blocks(hdr) - curr; | |
| } while (rem > 0); | |
| return total - accounted; | |
| } | |
| /* tipc_msg_validate - validate basic format of received message | |
| * | |
| * This routine ensures a TIPC message has an acceptable header, and at least | |
| * as much data as the header indicates it should. The routine also ensures | |
| * that the entire message header is stored in the main fragment of the message | |
| * buffer, to simplify future access to message header fields. | |
| * | |
| * Note: Having extra info present in the message header or data areas is OK. | |
| * TIPC will ignore the excess, under the assumption that it is optional info | |
| * introduced by a later release of the protocol. | |
| */ | |
| bool tipc_msg_validate(struct sk_buff **_skb) | |
| { | |
| struct sk_buff *skb = *_skb; | |
| struct tipc_msg *hdr; | |
| int msz, hsz; | |
| /* Ensure that flow control ratio condition is satisfied */ | |
| if (unlikely(skb->truesize / buf_roundup_len(skb) >= 4)) { | |
| skb = skb_copy_expand(skb, BUF_HEADROOM, 0, GFP_ATOMIC); | |
| if (!skb) | |
| return false; | |
| kfree_skb(*_skb); | |
| *_skb = skb; | |
| } | |
| if (unlikely(TIPC_SKB_CB(skb)->validated)) | |
| return true; | |
| if (unlikely(!pskb_may_pull(skb, MIN_H_SIZE))) | |
| return false; | |
| hsz = msg_hdr_sz(buf_msg(skb)); | |
| if (unlikely(hsz < MIN_H_SIZE) || (hsz > MAX_H_SIZE)) | |
| return false; | |
| if (unlikely(!pskb_may_pull(skb, hsz))) | |
| return false; | |
| hdr = buf_msg(skb); | |
| if (unlikely(msg_version(hdr) != TIPC_VERSION)) | |
| return false; | |
| msz = msg_size(hdr); | |
| if (unlikely(msz < hsz)) | |
| return false; | |
| if (unlikely((msz - hsz) > TIPC_MAX_USER_MSG_SIZE)) | |
| return false; | |
| if (unlikely(skb->len < msz)) | |
| return false; | |
| TIPC_SKB_CB(skb)->validated = 1; | |
| return true; | |
| } | |
| /** | |
| * tipc_msg_fragment - build a fragment skb list for TIPC message | |
| * | |
| * @skb: TIPC message skb | |
| * @hdr: internal msg header to be put on the top of the fragments | |
| * @pktmax: max size of a fragment incl. the header | |
| * @frags: returned fragment skb list | |
| * | |
| * Return: 0 if the fragmentation is successful, otherwise: -EINVAL | |
| * or -ENOMEM | |
| */ | |
| int tipc_msg_fragment(struct sk_buff *skb, const struct tipc_msg *hdr, | |
| int pktmax, struct sk_buff_head *frags) | |
| { | |
| int pktno, nof_fragms, dsz, dmax, eat; | |
| struct tipc_msg *_hdr; | |
| struct sk_buff *_skb; | |
| u8 *data; | |
| /* Non-linear buffer? */ | |
| if (skb_linearize(skb)) | |
| return -ENOMEM; | |
| data = (u8 *)skb->data; | |
| dsz = msg_size(buf_msg(skb)); | |
| dmax = pktmax - INT_H_SIZE; | |
| if (dsz <= dmax || !dmax) | |
| return -EINVAL; | |
| nof_fragms = dsz / dmax + 1; | |
| for (pktno = 1; pktno <= nof_fragms; pktno++) { | |
| if (pktno < nof_fragms) | |
| eat = dmax; | |
| else | |
| eat = dsz % dmax; | |
| /* Allocate a new fragment */ | |
| _skb = tipc_buf_acquire(INT_H_SIZE + eat, GFP_ATOMIC); | |
| if (!_skb) | |
| goto error; | |
| skb_orphan(_skb); | |
| __skb_queue_tail(frags, _skb); | |
| /* Copy header & data to the fragment */ | |
| skb_copy_to_linear_data(_skb, hdr, INT_H_SIZE); | |
| skb_copy_to_linear_data_offset(_skb, INT_H_SIZE, data, eat); | |
| data += eat; | |
| /* Update the fragment's header */ | |
| _hdr = buf_msg(_skb); | |
| msg_set_fragm_no(_hdr, pktno); | |
| msg_set_nof_fragms(_hdr, nof_fragms); | |
| msg_set_size(_hdr, INT_H_SIZE + eat); | |
| } | |
| return 0; | |
| error: | |
| __skb_queue_purge(frags); | |
| __skb_queue_head_init(frags); | |
| return -ENOMEM; | |
| } | |
| /** | |
| * tipc_msg_build - create buffer chain containing specified header and data | |
| * @mhdr: Message header, to be prepended to data | |
| * @m: User message | |
| * @offset: buffer offset for fragmented messages (FIXME) | |
| * @dsz: Total length of user data | |
| * @pktmax: Max packet size that can be used | |
| * @list: Buffer or chain of buffers to be returned to caller | |
| * | |
| * Note that the recursive call we are making here is safe, since it can | |
| * logically go only one further level down. | |
| * | |
| * Return: message data size or errno: -ENOMEM, -EFAULT | |
| */ | |
| int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, int offset, | |
| int dsz, int pktmax, struct sk_buff_head *list) | |
| { | |
| int mhsz = msg_hdr_sz(mhdr); | |
| struct tipc_msg pkthdr; | |
| int msz = mhsz + dsz; | |
| int pktrem = pktmax; | |
| struct sk_buff *skb; | |
| int drem = dsz; | |
| int pktno = 1; | |
| char *pktpos; | |
| int pktsz; | |
| int rc; | |
| msg_set_size(mhdr, msz); | |
| /* No fragmentation needed? */ | |
| if (likely(msz <= pktmax)) { | |
| skb = tipc_buf_acquire(msz, GFP_KERNEL); | |
| /* Fall back to smaller MTU if node local message */ | |
| if (unlikely(!skb)) { | |
| if (pktmax != MAX_MSG_SIZE) | |
| return -ENOMEM; | |
| rc = tipc_msg_build(mhdr, m, offset, dsz, | |
| one_page_mtu, list); | |
| if (rc != dsz) | |
| return rc; | |
| if (tipc_msg_assemble(list)) | |
| return dsz; | |
| return -ENOMEM; | |
| } | |
| skb_orphan(skb); | |
| __skb_queue_tail(list, skb); | |
| skb_copy_to_linear_data(skb, mhdr, mhsz); | |
| pktpos = skb->data + mhsz; | |
| if (copy_from_iter_full(pktpos, dsz, &m->msg_iter)) | |
| return dsz; | |
| rc = -EFAULT; | |
| goto error; | |
| } | |
| /* Prepare reusable fragment header */ | |
| tipc_msg_init(msg_prevnode(mhdr), &pkthdr, MSG_FRAGMENTER, | |
| FIRST_FRAGMENT, INT_H_SIZE, msg_destnode(mhdr)); | |
| msg_set_size(&pkthdr, pktmax); | |
| msg_set_fragm_no(&pkthdr, pktno); | |
| msg_set_importance(&pkthdr, msg_importance(mhdr)); | |
| /* Prepare first fragment */ | |
| skb = tipc_buf_acquire(pktmax, GFP_KERNEL); | |
| if (!skb) | |
| return -ENOMEM; | |
| skb_orphan(skb); | |
| __skb_queue_tail(list, skb); | |
| pktpos = skb->data; | |
| skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE); | |
| pktpos += INT_H_SIZE; | |
| pktrem -= INT_H_SIZE; | |
| skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz); | |
| pktpos += mhsz; | |
| pktrem -= mhsz; | |
| do { | |
| if (drem < pktrem) | |
| pktrem = drem; | |
| if (!copy_from_iter_full(pktpos, pktrem, &m->msg_iter)) { | |
| rc = -EFAULT; | |
| goto error; | |
| } | |
| drem -= pktrem; | |
| if (!drem) | |
| break; | |
| /* Prepare new fragment: */ | |
| if (drem < (pktmax - INT_H_SIZE)) | |
| pktsz = drem + INT_H_SIZE; | |
| else | |
| pktsz = pktmax; | |
| skb = tipc_buf_acquire(pktsz, GFP_KERNEL); | |
| if (!skb) { | |
| rc = -ENOMEM; | |
| goto error; | |
| } | |
| skb_orphan(skb); | |
| __skb_queue_tail(list, skb); | |
| msg_set_type(&pkthdr, FRAGMENT); | |
| msg_set_size(&pkthdr, pktsz); | |
| msg_set_fragm_no(&pkthdr, ++pktno); | |
| skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE); | |
| pktpos = skb->data + INT_H_SIZE; | |
| pktrem = pktsz - INT_H_SIZE; | |
| } while (1); | |
| msg_set_type(buf_msg(skb), LAST_FRAGMENT); | |
| return dsz; | |
| error: | |
| __skb_queue_purge(list); | |
| __skb_queue_head_init(list); | |
| return rc; | |
| } | |
| /** | |
| * tipc_msg_bundle - Append contents of a buffer to tail of an existing one | |
| * @bskb: the bundle buffer to append to | |
| * @msg: message to be appended | |
| * @max: max allowable size for the bundle buffer | |
| * | |
| * Return: "true" if bundling has been performed, otherwise "false" | |
| */ | |
| static bool tipc_msg_bundle(struct sk_buff *bskb, struct tipc_msg *msg, | |
| u32 max) | |
| { | |
| struct tipc_msg *bmsg = buf_msg(bskb); | |
| u32 msz, bsz, offset, pad; | |
| msz = msg_size(msg); | |
| bsz = msg_size(bmsg); | |
| offset = BUF_ALIGN(bsz); | |
| pad = offset - bsz; | |
| if (unlikely(skb_tailroom(bskb) < (pad + msz))) | |
| return false; | |
| if (unlikely(max < (offset + msz))) | |
| return false; | |
| skb_put(bskb, pad + msz); | |
| skb_copy_to_linear_data_offset(bskb, offset, msg, msz); | |
| msg_set_size(bmsg, offset + msz); | |
| msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1); | |
| return true; | |
| } | |
| /** | |
| * tipc_msg_try_bundle - Try to bundle a new message to the last one | |
| * @tskb: the last/target message to which the new one will be appended | |
| * @skb: the new message skb pointer | |
| * @mss: max message size (header inclusive) | |
| * @dnode: destination node for the message | |
| * @new_bundle: if this call made a new bundle or not | |
| * | |
| * Return: "true" if the new message skb is potential for bundling this time or | |
| * later, in the case a bundling has been done this time, the skb is consumed | |
| * (the skb pointer = NULL). | |
| * Otherwise, "false" if the skb cannot be bundled at all. | |
| */ | |
| bool tipc_msg_try_bundle(struct sk_buff *tskb, struct sk_buff **skb, u32 mss, | |
| u32 dnode, bool *new_bundle) | |
| { | |
| struct tipc_msg *msg, *inner, *outer; | |
| u32 tsz; | |
| /* First, check if the new buffer is suitable for bundling */ | |
| msg = buf_msg(*skb); | |
| if (msg_user(msg) == MSG_FRAGMENTER) | |
| return false; | |
| if (msg_user(msg) == TUNNEL_PROTOCOL) | |
| return false; | |
| if (msg_user(msg) == BCAST_PROTOCOL) | |
| return false; | |
| if (mss <= INT_H_SIZE + msg_size(msg)) | |
| return false; | |
| /* Ok, but the last/target buffer can be empty? */ | |
| if (unlikely(!tskb)) | |
| return true; | |
| /* Is it a bundle already? Try to bundle the new message to it */ | |
| if (msg_user(buf_msg(tskb)) == MSG_BUNDLER) { | |
| *new_bundle = false; | |
| goto bundle; | |
| } | |
| /* Make a new bundle of the two messages if possible */ | |
| tsz = msg_size(buf_msg(tskb)); | |
| if (unlikely(mss < BUF_ALIGN(INT_H_SIZE + tsz) + msg_size(msg))) | |
| return true; | |
| if (unlikely(pskb_expand_head(tskb, INT_H_SIZE, mss - tsz - INT_H_SIZE, | |
| GFP_ATOMIC))) | |
| return true; | |
| inner = buf_msg(tskb); | |
| skb_push(tskb, INT_H_SIZE); | |
| outer = buf_msg(tskb); | |
| tipc_msg_init(msg_prevnode(inner), outer, MSG_BUNDLER, 0, INT_H_SIZE, | |
| dnode); | |
| msg_set_importance(outer, msg_importance(inner)); | |
| msg_set_size(outer, INT_H_SIZE + tsz); | |
| msg_set_msgcnt(outer, 1); | |
| *new_bundle = true; | |
| bundle: | |
| if (likely(tipc_msg_bundle(tskb, msg, mss))) { | |
| consume_skb(*skb); | |
| *skb = NULL; | |
| } | |
| return true; | |
| } | |
| /** | |
| * tipc_msg_extract(): extract bundled inner packet from buffer | |
| * @skb: buffer to be extracted from. | |
| * @iskb: extracted inner buffer, to be returned | |
| * @pos: position in outer message of msg to be extracted. | |
| * Returns position of next msg. | |
| * Consumes outer buffer when last packet extracted | |
| * Return: true when there is an extracted buffer, otherwise false | |
| */ | |
| bool tipc_msg_extract(struct sk_buff *skb, struct sk_buff **iskb, int *pos) | |
| { | |
| struct tipc_msg *hdr, *ihdr; | |
| int imsz; | |
| *iskb = NULL; | |
| if (unlikely(skb_linearize(skb))) | |
| goto none; | |
| hdr = buf_msg(skb); | |
| if (unlikely(*pos > (msg_data_sz(hdr) - MIN_H_SIZE))) | |
| goto none; | |
| ihdr = (struct tipc_msg *)(msg_data(hdr) + *pos); | |
| imsz = msg_size(ihdr); | |
| if ((*pos + imsz) > msg_data_sz(hdr)) | |
| goto none; | |
| *iskb = tipc_buf_acquire(imsz, GFP_ATOMIC); | |
| if (!*iskb) | |
| goto none; | |
| skb_copy_to_linear_data(*iskb, ihdr, imsz); | |
| if (unlikely(!tipc_msg_validate(iskb))) | |
| goto none; | |
| *pos += BUF_ALIGN(imsz); | |
| return true; | |
| none: | |
| kfree_skb(skb); | |
| kfree_skb(*iskb); | |
| *iskb = NULL; | |
| return false; | |
| } | |
| /** | |
| * tipc_msg_reverse(): swap source and destination addresses and add error code | |
| * @own_node: originating node id for reversed message | |
| * @skb: buffer containing message to be reversed; will be consumed | |
| * @err: error code to be set in message, if any | |
| * Replaces consumed buffer with new one when successful | |
| * Return: true if success, otherwise false | |
| */ | |
| bool tipc_msg_reverse(u32 own_node, struct sk_buff **skb, int err) | |
| { | |
| struct sk_buff *_skb = *skb; | |
| struct tipc_msg *_hdr, *hdr; | |
| int hlen, dlen; | |
| if (skb_linearize(_skb)) | |
| goto exit; | |
| _hdr = buf_msg(_skb); | |
| dlen = min_t(uint, msg_data_sz(_hdr), MAX_FORWARD_SIZE); | |
| hlen = msg_hdr_sz(_hdr); | |
| if (msg_dest_droppable(_hdr)) | |
| goto exit; | |
| if (msg_errcode(_hdr)) | |
| goto exit; | |
| /* Never return SHORT header */ | |
| if (hlen == SHORT_H_SIZE) | |
| hlen = BASIC_H_SIZE; | |
| /* Don't return data along with SYN+, - sender has a clone */ | |
| if (msg_is_syn(_hdr) && err == TIPC_ERR_OVERLOAD) | |
| dlen = 0; | |
| /* Allocate new buffer to return */ | |
| *skb = tipc_buf_acquire(hlen + dlen, GFP_ATOMIC); | |
| if (!*skb) | |
| goto exit; | |
| memcpy((*skb)->data, _skb->data, msg_hdr_sz(_hdr)); | |
| memcpy((*skb)->data + hlen, msg_data(_hdr), dlen); | |
| /* Build reverse header in new buffer */ | |
| hdr = buf_msg(*skb); | |
| msg_set_hdr_sz(hdr, hlen); | |
| msg_set_errcode(hdr, err); | |
| msg_set_non_seq(hdr, 0); | |
| msg_set_origport(hdr, msg_destport(_hdr)); | |
| msg_set_destport(hdr, msg_origport(_hdr)); | |
| msg_set_destnode(hdr, msg_prevnode(_hdr)); | |
| msg_set_prevnode(hdr, own_node); | |
| msg_set_orignode(hdr, own_node); | |
| msg_set_size(hdr, hlen + dlen); | |
| skb_orphan(_skb); | |
| kfree_skb(_skb); | |
| return true; | |
| exit: | |
| kfree_skb(_skb); | |
| *skb = NULL; | |
| return false; | |
| } | |
| bool tipc_msg_skb_clone(struct sk_buff_head *msg, struct sk_buff_head *cpy) | |
| { | |
| struct sk_buff *skb, *_skb; | |
| skb_queue_walk(msg, skb) { | |
| _skb = skb_clone(skb, GFP_ATOMIC); | |
| if (!_skb) { | |
| __skb_queue_purge(cpy); | |
| pr_err_ratelimited("Failed to clone buffer chain\n"); | |
| return false; | |
| } | |
| __skb_queue_tail(cpy, _skb); | |
| } | |
| return true; | |
| } | |
| /** | |
| * tipc_msg_lookup_dest(): try to find new destination for named message | |
| * @net: pointer to associated network namespace | |
| * @skb: the buffer containing the message. | |
| * @err: error code to be used by caller if lookup fails | |
| * Does not consume buffer | |
| * Return: true if a destination is found, false otherwise | |
| */ | |
| bool tipc_msg_lookup_dest(struct net *net, struct sk_buff *skb, int *err) | |
| { | |
| struct tipc_msg *msg = buf_msg(skb); | |
| u32 scope = msg_lookup_scope(msg); | |
| u32 self = tipc_own_addr(net); | |
| u32 inst = msg_nameinst(msg); | |
| struct tipc_socket_addr sk; | |
| struct tipc_uaddr ua; | |
| if (!msg_isdata(msg)) | |
| return false; | |
| if (!msg_named(msg)) | |
| return false; | |
| if (msg_errcode(msg)) | |
| return false; | |
| *err = TIPC_ERR_NO_NAME; | |
| if (skb_linearize(skb)) | |
| return false; | |
| msg = buf_msg(skb); | |
| if (msg_reroute_cnt(msg)) | |
| return false; | |
| tipc_uaddr(&ua, TIPC_SERVICE_RANGE, scope, | |
| msg_nametype(msg), inst, inst); | |
| sk.node = tipc_scope2node(net, scope); | |
| if (!tipc_nametbl_lookup_anycast(net, &ua, &sk)) | |
| return false; | |
| msg_incr_reroute_cnt(msg); | |
| if (sk.node != self) | |
| msg_set_prevnode(msg, self); | |
| msg_set_destnode(msg, sk.node); | |
| msg_set_destport(msg, sk.ref); | |
| *err = TIPC_OK; | |
| return true; | |
| } | |
| /* tipc_msg_assemble() - assemble chain of fragments into one message | |
| */ | |
| bool tipc_msg_assemble(struct sk_buff_head *list) | |
| { | |
| struct sk_buff *skb, *tmp = NULL; | |
| if (skb_queue_len(list) == 1) | |
| return true; | |
| while ((skb = __skb_dequeue(list))) { | |
| skb->next = NULL; | |
| if (tipc_buf_append(&tmp, &skb)) { | |
| __skb_queue_tail(list, skb); | |
| return true; | |
| } | |
| if (!tmp) | |
| break; | |
| } | |
| __skb_queue_purge(list); | |
| __skb_queue_head_init(list); | |
| pr_warn("Failed do assemble buffer\n"); | |
| return false; | |
| } | |
| /* tipc_msg_reassemble() - clone a buffer chain of fragments and | |
| * reassemble the clones into one message | |
| */ | |
| bool tipc_msg_reassemble(struct sk_buff_head *list, struct sk_buff_head *rcvq) | |
| { | |
| struct sk_buff *skb, *_skb; | |
| struct sk_buff *frag = NULL; | |
| struct sk_buff *head = NULL; | |
| int hdr_len; | |
| /* Copy header if single buffer */ | |
| if (skb_queue_len(list) == 1) { | |
| skb = skb_peek(list); | |
| hdr_len = skb_headroom(skb) + msg_hdr_sz(buf_msg(skb)); | |
| _skb = __pskb_copy(skb, hdr_len, GFP_ATOMIC); | |
| if (!_skb) | |
| return false; | |
| __skb_queue_tail(rcvq, _skb); | |
| return true; | |
| } | |
| /* Clone all fragments and reassemble */ | |
| skb_queue_walk(list, skb) { | |
| frag = skb_clone(skb, GFP_ATOMIC); | |
| if (!frag) | |
| goto error; | |
| frag->next = NULL; | |
| if (tipc_buf_append(&head, &frag)) | |
| break; | |
| if (!head) | |
| goto error; | |
| } | |
| __skb_queue_tail(rcvq, frag); | |
| return true; | |
| error: | |
| pr_warn("Failed do clone local mcast rcv buffer\n"); | |
| kfree_skb(head); | |
| return false; | |
| } | |
| bool tipc_msg_pskb_copy(u32 dst, struct sk_buff_head *msg, | |
| struct sk_buff_head *cpy) | |
| { | |
| struct sk_buff *skb, *_skb; | |
| skb_queue_walk(msg, skb) { | |
| _skb = pskb_copy(skb, GFP_ATOMIC); | |
| if (!_skb) { | |
| __skb_queue_purge(cpy); | |
| return false; | |
| } | |
| msg_set_destnode(buf_msg(_skb), dst); | |
| __skb_queue_tail(cpy, _skb); | |
| } | |
| return true; | |
| } | |
| /* tipc_skb_queue_sorted(); sort pkt into list according to sequence number | |
| * @list: list to be appended to | |
| * @seqno: sequence number of buffer to add | |
| * @skb: buffer to add | |
| */ | |
| bool __tipc_skb_queue_sorted(struct sk_buff_head *list, u16 seqno, | |
| struct sk_buff *skb) | |
| { | |
| struct sk_buff *_skb, *tmp; | |
| if (skb_queue_empty(list) || less(seqno, buf_seqno(skb_peek(list)))) { | |
| __skb_queue_head(list, skb); | |
| return true; | |
| } | |
| if (more(seqno, buf_seqno(skb_peek_tail(list)))) { | |
| __skb_queue_tail(list, skb); | |
| return true; | |
| } | |
| skb_queue_walk_safe(list, _skb, tmp) { | |
| if (more(seqno, buf_seqno(_skb))) | |
| continue; | |
| if (seqno == buf_seqno(_skb)) | |
| break; | |
| __skb_queue_before(list, _skb, skb); | |
| return true; | |
| } | |
| kfree_skb(skb); | |
| return false; | |
| } | |
| void tipc_skb_reject(struct net *net, int err, struct sk_buff *skb, | |
| struct sk_buff_head *xmitq) | |
| { | |
| if (tipc_msg_reverse(tipc_own_addr(net), &skb, err)) | |
| __skb_queue_tail(xmitq, skb); | |
| } |