| /* | |
| * OMAP2plus display device setup / initialization. | |
| * | |
| * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ | |
| * Senthilvadivu Guruswamy | |
| * Sumit Semwal | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/io.h> | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/delay.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/slab.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/regmap.h> | |
| #include <linux/platform_data/omapdss.h> | |
| #include "omap_hwmod.h" | |
| #include "omap_device.h" | |
| #include "common.h" | |
| #include "soc.h" | |
| #include "iomap.h" | |
| #include "control.h" | |
| #include "display.h" | |
| #include "prm.h" | |
| #define DISPC_CONTROL 0x0040 | |
| #define DISPC_CONTROL2 0x0238 | |
| #define DISPC_CONTROL3 0x0848 | |
| #define DISPC_IRQSTATUS 0x0018 | |
| #define DSS_CONTROL 0x40 | |
| #define DSS_SDI_CONTROL 0x44 | |
| #define DSS_PLL_CONTROL 0x48 | |
| #define LCD_EN_MASK (0x1 << 0) | |
| #define DIGIT_EN_MASK (0x1 << 1) | |
| #define FRAMEDONE_IRQ_SHIFT 0 | |
| #define EVSYNC_EVEN_IRQ_SHIFT 2 | |
| #define EVSYNC_ODD_IRQ_SHIFT 3 | |
| #define FRAMEDONE2_IRQ_SHIFT 22 | |
| #define FRAMEDONE3_IRQ_SHIFT 30 | |
| #define FRAMEDONETV_IRQ_SHIFT 24 | |
| /* | |
| * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC | |
| * reset before deciding that something has gone wrong | |
| */ | |
| #define FRAMEDONE_IRQ_TIMEOUT 100 | |
| #if defined(CONFIG_FB_OMAP2) | |
| static struct platform_device omap_display_device = { | |
| .name = "omapdss", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = NULL, | |
| }, | |
| }; | |
| #define OMAP4_DSIPHY_SYSCON_OFFSET 0x78 | |
| static struct regmap *omap4_dsi_mux_syscon; | |
| static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) | |
| { | |
| u32 enable_mask, enable_shift; | |
| u32 pipd_mask, pipd_shift; | |
| u32 reg; | |
| int ret; | |
| if (dsi_id == 0) { | |
| enable_mask = OMAP4_DSI1_LANEENABLE_MASK; | |
| enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; | |
| pipd_mask = OMAP4_DSI1_PIPD_MASK; | |
| pipd_shift = OMAP4_DSI1_PIPD_SHIFT; | |
| } else if (dsi_id == 1) { | |
| enable_mask = OMAP4_DSI2_LANEENABLE_MASK; | |
| enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; | |
| pipd_mask = OMAP4_DSI2_PIPD_MASK; | |
| pipd_shift = OMAP4_DSI2_PIPD_SHIFT; | |
| } else { | |
| return -ENODEV; | |
| } | |
| ret = regmap_read(omap4_dsi_mux_syscon, | |
| OMAP4_DSIPHY_SYSCON_OFFSET, | |
| ®); | |
| if (ret) | |
| return ret; | |
| reg &= ~enable_mask; | |
| reg &= ~pipd_mask; | |
| reg |= (lanes << enable_shift) & enable_mask; | |
| reg |= (lanes << pipd_shift) & pipd_mask; | |
| regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg); | |
| return 0; | |
| } | |
| static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) | |
| { | |
| if (cpu_is_omap44xx()) | |
| return omap4_dsi_mux_pads(dsi_id, lane_mask); | |
| return 0; | |
| } | |
| static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) | |
| { | |
| if (cpu_is_omap44xx()) | |
| omap4_dsi_mux_pads(dsi_id, 0); | |
| } | |
| static enum omapdss_version __init omap_display_get_version(void) | |
| { | |
| if (cpu_is_omap24xx()) | |
| return OMAPDSS_VER_OMAP24xx; | |
| else if (cpu_is_omap3630()) | |
| return OMAPDSS_VER_OMAP3630; | |
| else if (cpu_is_omap34xx()) { | |
| if (soc_is_am35xx()) { | |
| return OMAPDSS_VER_AM35xx; | |
| } else { | |
| if (omap_rev() < OMAP3430_REV_ES3_0) | |
| return OMAPDSS_VER_OMAP34xx_ES1; | |
| else | |
| return OMAPDSS_VER_OMAP34xx_ES3; | |
| } | |
| } else if (omap_rev() == OMAP4430_REV_ES1_0) | |
| return OMAPDSS_VER_OMAP4430_ES1; | |
| else if (omap_rev() == OMAP4430_REV_ES2_0 || | |
| omap_rev() == OMAP4430_REV_ES2_1 || | |
| omap_rev() == OMAP4430_REV_ES2_2) | |
| return OMAPDSS_VER_OMAP4430_ES2; | |
| else if (cpu_is_omap44xx()) | |
| return OMAPDSS_VER_OMAP4; | |
| else if (soc_is_omap54xx()) | |
| return OMAPDSS_VER_OMAP5; | |
| else if (soc_is_am43xx()) | |
| return OMAPDSS_VER_AM43xx; | |
| else if (soc_is_dra7xx()) | |
| return OMAPDSS_VER_DRA7xx; | |
| else | |
| return OMAPDSS_VER_UNKNOWN; | |
| } | |
| static int __init omapdss_init_fbdev(void) | |
| { | |
| static struct omap_dss_board_info board_data = { | |
| .dsi_enable_pads = omap_dsi_enable_pads, | |
| .dsi_disable_pads = omap_dsi_disable_pads, | |
| }; | |
| struct device_node *node; | |
| int r; | |
| board_data.version = omap_display_get_version(); | |
| if (board_data.version == OMAPDSS_VER_UNKNOWN) { | |
| pr_err("DSS not supported on this SoC\n"); | |
| return -ENODEV; | |
| } | |
| omap_display_device.dev.platform_data = &board_data; | |
| r = platform_device_register(&omap_display_device); | |
| if (r < 0) { | |
| pr_err("Unable to register omapdss device\n"); | |
| return r; | |
| } | |
| /* create vrfb device */ | |
| r = omap_init_vrfb(); | |
| if (r < 0) { | |
| pr_err("Unable to register omapvrfb device\n"); | |
| return r; | |
| } | |
| /* create FB device */ | |
| r = omap_init_fb(); | |
| if (r < 0) { | |
| pr_err("Unable to register omapfb device\n"); | |
| return r; | |
| } | |
| /* create V4L2 display device */ | |
| r = omap_init_vout(); | |
| if (r < 0) { | |
| pr_err("Unable to register omap_vout device\n"); | |
| return r; | |
| } | |
| /* add DSI info for omap4 */ | |
| node = of_find_node_by_name(NULL, "omap4_padconf_global"); | |
| if (node) | |
| omap4_dsi_mux_syscon = syscon_node_to_regmap(node); | |
| return 0; | |
| } | |
| static const char * const omapdss_compat_names[] __initconst = { | |
| "ti,omap2-dss", | |
| "ti,omap3-dss", | |
| "ti,omap4-dss", | |
| "ti,omap5-dss", | |
| "ti,dra7-dss", | |
| }; | |
| static struct device_node * __init omapdss_find_dss_of_node(void) | |
| { | |
| struct device_node *node; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { | |
| node = of_find_compatible_node(NULL, NULL, | |
| omapdss_compat_names[i]); | |
| if (node) | |
| return node; | |
| } | |
| return NULL; | |
| } | |
| static int __init omapdss_init_of(void) | |
| { | |
| int r; | |
| struct device_node *node; | |
| struct platform_device *pdev; | |
| /* only create dss helper devices if dss is enabled in the .dts */ | |
| node = omapdss_find_dss_of_node(); | |
| if (!node) | |
| return 0; | |
| if (!of_device_is_available(node)) { | |
| of_node_put(node); | |
| return 0; | |
| } | |
| pdev = of_find_device_by_node(node); | |
| if (!pdev) { | |
| pr_err("Unable to find DSS platform device\n"); | |
| return -ENODEV; | |
| } | |
| r = of_platform_populate(node, NULL, NULL, &pdev->dev); | |
| if (r) { | |
| pr_err("Unable to populate DSS submodule devices\n"); | |
| put_device(&pdev->dev); | |
| return r; | |
| } | |
| return omapdss_init_fbdev(); | |
| } | |
| omap_device_initcall(omapdss_init_of); | |
| #endif /* CONFIG_FB_OMAP2 */ | |
| static void dispc_disable_outputs(void) | |
| { | |
| u32 v, irq_mask = 0; | |
| bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; | |
| int i; | |
| struct omap_dss_dispc_dev_attr *da; | |
| struct omap_hwmod *oh; | |
| oh = omap_hwmod_lookup("dss_dispc"); | |
| if (!oh) { | |
| WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); | |
| return; | |
| } | |
| if (!oh->dev_attr) { | |
| pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); | |
| return; | |
| } | |
| da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; | |
| /* store value of LCDENABLE and DIGITENABLE bits */ | |
| v = omap_hwmod_read(oh, DISPC_CONTROL); | |
| lcd_en = v & LCD_EN_MASK; | |
| digit_en = v & DIGIT_EN_MASK; | |
| /* store value of LCDENABLE for LCD2 */ | |
| if (da->manager_count > 2) { | |
| v = omap_hwmod_read(oh, DISPC_CONTROL2); | |
| lcd2_en = v & LCD_EN_MASK; | |
| } | |
| /* store value of LCDENABLE for LCD3 */ | |
| if (da->manager_count > 3) { | |
| v = omap_hwmod_read(oh, DISPC_CONTROL3); | |
| lcd3_en = v & LCD_EN_MASK; | |
| } | |
| if (!(lcd_en | digit_en | lcd2_en | lcd3_en)) | |
| return; /* no managers currently enabled */ | |
| /* | |
| * If any manager was enabled, we need to disable it before | |
| * DSS clocks are disabled or DISPC module is reset | |
| */ | |
| if (lcd_en) | |
| irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; | |
| if (digit_en) { | |
| if (da->has_framedonetv_irq) { | |
| irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; | |
| } else { | |
| irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | | |
| 1 << EVSYNC_ODD_IRQ_SHIFT; | |
| } | |
| } | |
| if (lcd2_en) | |
| irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; | |
| if (lcd3_en) | |
| irq_mask |= 1 << FRAMEDONE3_IRQ_SHIFT; | |
| /* | |
| * clear any previous FRAMEDONE, FRAMEDONETV, | |
| * EVSYNC_EVEN/ODD, FRAMEDONE2 or FRAMEDONE3 interrupts | |
| */ | |
| omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); | |
| /* disable LCD and TV managers */ | |
| v = omap_hwmod_read(oh, DISPC_CONTROL); | |
| v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); | |
| omap_hwmod_write(v, oh, DISPC_CONTROL); | |
| /* disable LCD2 manager */ | |
| if (da->manager_count > 2) { | |
| v = omap_hwmod_read(oh, DISPC_CONTROL2); | |
| v &= ~LCD_EN_MASK; | |
| omap_hwmod_write(v, oh, DISPC_CONTROL2); | |
| } | |
| /* disable LCD3 manager */ | |
| if (da->manager_count > 3) { | |
| v = omap_hwmod_read(oh, DISPC_CONTROL3); | |
| v &= ~LCD_EN_MASK; | |
| omap_hwmod_write(v, oh, DISPC_CONTROL3); | |
| } | |
| i = 0; | |
| while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != | |
| irq_mask) { | |
| i++; | |
| if (i > FRAMEDONE_IRQ_TIMEOUT) { | |
| pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); | |
| break; | |
| } | |
| mdelay(1); | |
| } | |
| } | |
| int omap_dss_reset(struct omap_hwmod *oh) | |
| { | |
| struct omap_hwmod_opt_clk *oc; | |
| int c = 0; | |
| int i, r; | |
| if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { | |
| pr_err("dss_core: hwmod data doesn't contain reset data\n"); | |
| return -EINVAL; | |
| } | |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) | |
| clk_prepare_enable(oc->_clk); | |
| dispc_disable_outputs(); | |
| /* clear SDI registers */ | |
| if (cpu_is_omap3430()) { | |
| omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); | |
| omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); | |
| } | |
| /* | |
| * clear DSS_CONTROL register to switch DSS clock sources to | |
| * PRCM clock, if any | |
| */ | |
| omap_hwmod_write(0x0, oh, DSS_CONTROL); | |
| omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) | |
| & SYSS_RESETDONE_MASK), | |
| MAX_MODULE_SOFTRESET_WAIT, c); | |
| if (c == MAX_MODULE_SOFTRESET_WAIT) | |
| pr_warn("dss_core: waiting for reset to finish failed\n"); | |
| else | |
| pr_debug("dss_core: softreset done\n"); | |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) | |
| clk_disable_unprepare(oc->_clk); | |
| r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; | |
| return r; | |
| } |