| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/arch/arm/mach-pxa/saar.c | |
| * | |
| * Support for the Marvell PXA930 Handheld Platform (aka SAAR) | |
| * | |
| * Copyright (C) 2007-2008 Marvell International Ltd. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/gpio.h> | |
| #include <linux/delay.h> | |
| #include <linux/fb.h> | |
| #include <linux/i2c.h> | |
| #include <linux/platform_data/i2c-pxa.h> | |
| #include <linux/smc91x.h> | |
| #include <linux/mfd/da903x.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <linux/mtd/onenand.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <asm/mach/flash.h> | |
| #include "pxa930.h" | |
| #include <linux/platform_data/video-pxafb.h> | |
| #include "devices.h" | |
| #include "generic.h" | |
| #define GPIO_LCD_RESET (16) | |
| /* SAAR MFP configurations */ | |
| static mfp_cfg_t saar_mfp_cfg[] __initdata = { | |
| /* LCD */ | |
| GPIO23_LCD_DD0, | |
| GPIO24_LCD_DD1, | |
| GPIO25_LCD_DD2, | |
| GPIO26_LCD_DD3, | |
| GPIO27_LCD_DD4, | |
| GPIO28_LCD_DD5, | |
| GPIO29_LCD_DD6, | |
| GPIO44_LCD_DD7, | |
| GPIO21_LCD_CS, | |
| GPIO22_LCD_VSYNC, | |
| GPIO17_LCD_FCLK_RD, | |
| GPIO18_LCD_LCLK_A0, | |
| GPIO19_LCD_PCLK_WR, | |
| GPIO16_GPIO, /* LCD reset */ | |
| /* Ethernet */ | |
| DF_nCS1_nCS3, | |
| GPIO97_GPIO, | |
| /* DFI */ | |
| DF_INT_RnB_ND_INT_RnB, | |
| DF_nRE_nOE_ND_nRE, | |
| DF_nWE_ND_nWE, | |
| DF_CLE_nOE_ND_CLE, | |
| DF_nADV1_ALE_ND_ALE, | |
| DF_nADV2_ALE_nCS3, | |
| DF_nCS0_ND_nCS0, | |
| DF_IO0_ND_IO0, | |
| DF_IO1_ND_IO1, | |
| DF_IO2_ND_IO2, | |
| DF_IO3_ND_IO3, | |
| DF_IO4_ND_IO4, | |
| DF_IO5_ND_IO5, | |
| DF_IO6_ND_IO6, | |
| DF_IO7_ND_IO7, | |
| DF_IO8_ND_IO8, | |
| DF_IO9_ND_IO9, | |
| DF_IO10_ND_IO10, | |
| DF_IO11_ND_IO11, | |
| DF_IO12_ND_IO12, | |
| DF_IO13_ND_IO13, | |
| DF_IO14_ND_IO14, | |
| DF_IO15_ND_IO15, | |
| }; | |
| #define SAAR_ETH_PHYS (0x14000000) | |
| static struct resource smc91x_resources[] = { | |
| [0] = { | |
| .start = (SAAR_ETH_PHYS + 0x300), | |
| .end = (SAAR_ETH_PHYS + 0xfffff), | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| [1] = { | |
| .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), | |
| .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), | |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, | |
| } | |
| }; | |
| static struct smc91x_platdata saar_smc91x_info = { | |
| .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, | |
| }; | |
| static struct platform_device smc91x_device = { | |
| .name = "smc91x", | |
| .id = 0, | |
| .num_resources = ARRAY_SIZE(smc91x_resources), | |
| .resource = smc91x_resources, | |
| .dev = { | |
| .platform_data = &saar_smc91x_info, | |
| }, | |
| }; | |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) | |
| static uint16_t lcd_power_on[] = { | |
| /* single frame */ | |
| SMART_CMD_NOOP, | |
| SMART_CMD(0x00), | |
| SMART_DELAY(0), | |
| SMART_CMD_NOOP, | |
| SMART_CMD(0x00), | |
| SMART_DELAY(0), | |
| SMART_CMD_NOOP, | |
| SMART_CMD(0x00), | |
| SMART_DELAY(0), | |
| SMART_CMD_NOOP, | |
| SMART_CMD(0x00), | |
| SMART_DELAY(10), | |
| /* calibration control */ | |
| SMART_CMD(0x00), | |
| SMART_CMD(0xA4), | |
| SMART_DAT(0x80), | |
| SMART_DAT(0x01), | |
| SMART_DELAY(150), | |
| /*Power-On Init sequence*/ | |
| SMART_CMD(0x00), /* output ctrl */ | |
| SMART_CMD(0x01), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* wave ctrl */ | |
| SMART_CMD(0x02), | |
| SMART_DAT(0x07), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x03), /* entry mode */ | |
| SMART_DAT(0xD0), | |
| SMART_DAT(0x30), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x08), /* display ctrl 2 */ | |
| SMART_DAT(0x08), | |
| SMART_DAT(0x08), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x09), /* display ctrl 3 */ | |
| SMART_DAT(0x04), | |
| SMART_DAT(0x2F), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x0A), /* display ctrl 4 */ | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x08), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x0D), /* Frame Marker position */ | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x08), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x60), /* Driver output control */ | |
| SMART_DAT(0x27), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x61), /* Base image display control */ | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x01), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x30), /* Y settings 30h-3Dh */ | |
| SMART_DAT(0x07), | |
| SMART_DAT(0x07), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x31), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x07), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x32), /* Timing(3), ASW HOLD=0.5CLK */ | |
| SMART_DAT(0x04), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x33), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */ | |
| SMART_DAT(0x03), | |
| SMART_DAT(0x03), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x34), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x35), | |
| SMART_DAT(0x02), | |
| SMART_DAT(0x05), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x36), | |
| SMART_DAT(0x1F), | |
| SMART_DAT(0x1F), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x37), | |
| SMART_DAT(0x07), | |
| SMART_DAT(0x07), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x38), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x07), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x39), | |
| SMART_DAT(0x04), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x3A), | |
| SMART_DAT(0x03), | |
| SMART_DAT(0x03), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x3B), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x3C), | |
| SMART_DAT(0x02), | |
| SMART_DAT(0x05), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x3D), | |
| SMART_DAT(0x1F), | |
| SMART_DAT(0x1F), | |
| SMART_CMD(0x00), /* Display control 1 */ | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x01), | |
| SMART_CMD(0x00), /* Power control 5 */ | |
| SMART_CMD(0x17), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x01), | |
| SMART_CMD(0x00), /* Power control 1 */ | |
| SMART_CMD(0x10), | |
| SMART_DAT(0x10), | |
| SMART_DAT(0xB0), | |
| SMART_CMD(0x00), /* Power control 2 */ | |
| SMART_CMD(0x11), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x30), | |
| SMART_CMD(0x00), /* Power control 3 */ | |
| SMART_CMD(0x12), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x9E), | |
| SMART_CMD(0x00), /* Power control 4 */ | |
| SMART_CMD(0x13), | |
| SMART_DAT(0x17), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* Power control 3 */ | |
| SMART_CMD(0x12), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0xBE), | |
| SMART_DELAY(100), | |
| /* display mode : 240*320 */ | |
| SMART_CMD(0x00), /* RAM address set(H) 0*/ | |
| SMART_CMD(0x20), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* RAM address set(V) 4*/ | |
| SMART_CMD(0x21), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* Start of Window RAM address set(H) 8*/ | |
| SMART_CMD(0x50), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* End of Window RAM address set(H) 12*/ | |
| SMART_CMD(0x51), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0xEF), | |
| SMART_CMD(0x00), /* Start of Window RAM address set(V) 16*/ | |
| SMART_CMD(0x52), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* End of Window RAM address set(V) 20*/ | |
| SMART_CMD(0x53), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x3F), | |
| SMART_CMD(0x00), /* Panel interface control 1 */ | |
| SMART_CMD(0x90), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x1A), | |
| SMART_CMD(0x00), /* Panel interface control 2 */ | |
| SMART_CMD(0x92), | |
| SMART_DAT(0x04), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* Panel interface control 3 */ | |
| SMART_CMD(0x93), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x05), | |
| SMART_DELAY(20), | |
| }; | |
| static uint16_t lcd_panel_on[] = { | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x21), | |
| SMART_DELAY(1), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x61), | |
| SMART_DELAY(100), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x73), | |
| SMART_DELAY(1), | |
| }; | |
| static uint16_t lcd_panel_off[] = { | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x72), | |
| SMART_DELAY(40), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x01), | |
| SMART_DELAY(1), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x07), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_DELAY(1), | |
| }; | |
| static uint16_t lcd_power_off[] = { | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x10), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x80), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x11), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x60), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x12), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0xAE), | |
| SMART_DELAY(40), | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x10), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| }; | |
| static uint16_t update_framedata[] = { | |
| /* set display ram: 240*320 */ | |
| SMART_CMD(0x00), /* RAM address set(H) 0*/ | |
| SMART_CMD(0x20), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* RAM address set(V) 4*/ | |
| SMART_CMD(0x21), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */ | |
| SMART_CMD(0x50), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */ | |
| SMART_CMD(0x51), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0xEF), | |
| SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */ | |
| SMART_CMD(0x52), | |
| SMART_DAT(0x00), | |
| SMART_DAT(0x00), | |
| SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */ | |
| SMART_CMD(0x53), | |
| SMART_DAT(0x01), | |
| SMART_DAT(0x3F), | |
| /* wait for vsync cmd before transferring frame data */ | |
| SMART_CMD_WAIT_FOR_VSYNC, | |
| /* write ram */ | |
| SMART_CMD(0x00), | |
| SMART_CMD(0x22), | |
| /* write frame data */ | |
| SMART_CMD_WRITE_FRAME, | |
| }; | |
| static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var) | |
| { | |
| static int pin_requested = 0; | |
| struct fb_info *info = container_of(var, struct fb_info, var); | |
| int err; | |
| if (!pin_requested) { | |
| err = gpio_request(GPIO_LCD_RESET, "lcd reset"); | |
| if (err) { | |
| pr_err("failed to request gpio for LCD reset\n"); | |
| return; | |
| } | |
| gpio_direction_output(GPIO_LCD_RESET, 0); | |
| pin_requested = 1; | |
| } | |
| if (on) { | |
| gpio_set_value(GPIO_LCD_RESET, 0); msleep(100); | |
| gpio_set_value(GPIO_LCD_RESET, 1); msleep(10); | |
| pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on)); | |
| pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on)); | |
| } else { | |
| pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off)); | |
| pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off)); | |
| } | |
| err = pxafb_smart_flush(info); | |
| if (err) | |
| pr_err("%s: timed out\n", __func__); | |
| } | |
| static void ltm022a97a_update(struct fb_info *info) | |
| { | |
| pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata)); | |
| pxafb_smart_flush(info); | |
| } | |
| static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = { | |
| [0] = { | |
| .xres = 240, | |
| .yres = 320, | |
| .bpp = 16, | |
| .a0csrd_set_hld = 30, | |
| .a0cswr_set_hld = 30, | |
| .wr_pulse_width = 30, | |
| .rd_pulse_width = 30, | |
| .op_hold_time = 30, | |
| .cmd_inh_time = 60, | |
| /* L_LCLK_A0 and L_LCLK_RD active low */ | |
| .sync = FB_SYNC_HOR_HIGH_ACT | | |
| FB_SYNC_VERT_HIGH_ACT, | |
| }, | |
| }; | |
| static struct pxafb_mach_info saar_lcd_info = { | |
| .modes = toshiba_ltm022a97a_modes, | |
| .num_modes = 1, | |
| .lcd_conn = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL, | |
| .pxafb_lcd_power = ltm022a97a_lcd_power, | |
| .smart_update = ltm022a97a_update, | |
| }; | |
| static void __init saar_init_lcd(void) | |
| { | |
| pxa_set_fb_info(NULL, &saar_lcd_info); | |
| } | |
| #else | |
| static inline void saar_init_lcd(void) {} | |
| #endif | |
| #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) | |
| static struct da9034_backlight_pdata saar_da9034_backlight = { | |
| .output_current = 4, /* 4mA */ | |
| }; | |
| static struct da903x_subdev_info saar_da9034_subdevs[] = { | |
| [0] = { | |
| .name = "da903x-backlight", | |
| .id = DA9034_ID_WLED, | |
| .platform_data = &saar_da9034_backlight, | |
| }, | |
| }; | |
| static struct da903x_platform_data saar_da9034_info = { | |
| .num_subdevs = ARRAY_SIZE(saar_da9034_subdevs), | |
| .subdevs = saar_da9034_subdevs, | |
| }; | |
| static struct i2c_board_info saar_i2c_info[] = { | |
| [0] = { | |
| .type = "da9034", | |
| .addr = 0x34, | |
| .platform_data = &saar_da9034_info, | |
| .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), | |
| }, | |
| }; | |
| static void __init saar_init_i2c(void) | |
| { | |
| pxa_set_i2c_info(NULL); | |
| i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info)); | |
| } | |
| #else | |
| static inline void saar_init_i2c(void) {} | |
| #endif | |
| #if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) | |
| static struct mtd_partition saar_onenand_partitions[] = { | |
| { | |
| .name = "bootloader", | |
| .offset = 0, | |
| .size = SZ_1M, | |
| .mask_flags = MTD_WRITEABLE, | |
| }, { | |
| .name = "reserved", | |
| .offset = MTDPART_OFS_APPEND, | |
| .size = SZ_128K, | |
| .mask_flags = MTD_WRITEABLE, | |
| }, { | |
| .name = "reserved", | |
| .offset = MTDPART_OFS_APPEND, | |
| .size = SZ_8M, | |
| .mask_flags = MTD_WRITEABLE, | |
| }, { | |
| .name = "kernel", | |
| .offset = MTDPART_OFS_APPEND, | |
| .size = (SZ_2M + SZ_1M), | |
| .mask_flags = 0, | |
| }, { | |
| .name = "filesystem", | |
| .offset = MTDPART_OFS_APPEND, | |
| .size = SZ_32M + SZ_16M, | |
| .mask_flags = 0, | |
| } | |
| }; | |
| static struct onenand_platform_data saar_onenand_info = { | |
| .parts = saar_onenand_partitions, | |
| .nr_parts = ARRAY_SIZE(saar_onenand_partitions), | |
| }; | |
| #define SMC_CS0_PHYS_BASE (0x10000000) | |
| static struct resource saar_resource_onenand[] = { | |
| [0] = { | |
| .start = SMC_CS0_PHYS_BASE, | |
| .end = SMC_CS0_PHYS_BASE + SZ_1M, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| }; | |
| static struct platform_device saar_device_onenand = { | |
| .name = "onenand-flash", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &saar_onenand_info, | |
| }, | |
| .resource = saar_resource_onenand, | |
| .num_resources = ARRAY_SIZE(saar_resource_onenand), | |
| }; | |
| static void __init saar_init_onenand(void) | |
| { | |
| platform_device_register(&saar_device_onenand); | |
| } | |
| #else | |
| static void __init saar_init_onenand(void) {} | |
| #endif | |
| static void __init saar_init(void) | |
| { | |
| /* initialize MFP configurations */ | |
| pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg)); | |
| pxa_set_ffuart_info(NULL); | |
| pxa_set_btuart_info(NULL); | |
| pxa_set_stuart_info(NULL); | |
| platform_device_register(&smc91x_device); | |
| saar_init_onenand(); | |
| saar_init_i2c(); | |
| saar_init_lcd(); | |
| } | |
| MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") | |
| /* Maintainer: Eric Miao <eric.miao@marvell.com> */ | |
| .atag_offset = 0x100, | |
| .map_io = pxa3xx_map_io, | |
| .nr_irqs = PXA_NR_IRQS, | |
| .init_irq = pxa3xx_init_irq, | |
| .handle_irq = pxa3xx_handle_irq, | |
| .init_time = pxa_timer_init, | |
| .init_machine = saar_init, | |
| .restart = pxa_restart, | |
| MACHINE_END |