| # SPDX-License-Identifier: GPL-2.0 | |
| # | |
| # Copyright 2009 Simtec Electronics | |
| source "arch/arm/mach-s3c/Kconfig.s3c24xx" | |
| source "arch/arm/mach-s3c/Kconfig.s3c64xx" | |
| config PLAT_SAMSUNG | |
| bool | |
| depends on PLAT_S3C24XX || ARCH_S3C64XX | |
| default y | |
| select GENERIC_IRQ_CHIP | |
| select NO_IOPORT_MAP | |
| select SOC_SAMSUNG | |
| help | |
| Base platform code for all Samsung SoC based systems | |
| config SAMSUNG_PM | |
| bool | |
| depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX) | |
| default y | |
| help | |
| Base platform power management code for samsung code | |
| if PLAT_SAMSUNG | |
| menu "Samsung Common options" | |
| # boot configurations | |
| comment "Boot options" | |
| config S3C_LOWLEVEL_UART_PORT | |
| int "S3C UART to use for low-level messages" | |
| depends on ARCH_S3C64XX | |
| default 0 | |
| help | |
| Choice of which UART port to use for the low-level messages, | |
| such as the `Uncompressing...` at start time. The value of | |
| this configuration should be between zero and two. The port | |
| must have been initialised by the boot-loader before use. | |
| config SAMSUNG_ATAGS | |
| def_bool n | |
| depends on ATAGS | |
| help | |
| This option enables ATAGS based boot support code for | |
| Samsung platforms, including static platform devices, legacy | |
| clock, timer and interrupt initialization, etc. | |
| Platforms that support only DT based boot need not to select | |
| this option. | |
| if SAMSUNG_ATAGS | |
| config S3C_GPIO_SPACE | |
| int "Space between gpio banks" | |
| default 0 | |
| help | |
| Add a number of spare GPIO entries between each bank for debugging | |
| purposes. This allows any problems where an counter overflows from | |
| one bank to another to be caught, at the expense of using a little | |
| more memory. | |
| config S3C_GPIO_TRACK | |
| bool | |
| help | |
| Internal configuration option to enable the s3c specific gpio | |
| chip tracking if the platform requires it. | |
| # ADC driver | |
| config S3C_ADC | |
| bool "ADC common driver support" | |
| depends on !ARCH_MULTIPLATFORM | |
| help | |
| Core support for the ADC block found in the Samsung SoC systems | |
| for drivers such as the touchscreen and hwmon to use to share | |
| this resource. | |
| # device definitions to compile in | |
| config S3C_DEV_HSMMC | |
| bool | |
| help | |
| Compile in platform device definitions for HSMMC code | |
| config S3C_DEV_HSMMC1 | |
| bool | |
| help | |
| Compile in platform device definitions for HSMMC channel 1 | |
| config S3C_DEV_HSMMC2 | |
| bool | |
| help | |
| Compile in platform device definitions for HSMMC channel 2 | |
| config S3C_DEV_HSMMC3 | |
| bool | |
| help | |
| Compile in platform device definitions for HSMMC channel 3 | |
| config S3C_DEV_HWMON | |
| bool | |
| help | |
| Compile in platform device definitions for HWMON | |
| config S3C_DEV_I2C1 | |
| bool | |
| help | |
| Compile in platform device definitions for I2C channel 1 | |
| config S3C_DEV_I2C2 | |
| bool | |
| help | |
| Compile in platform device definitions for I2C channel 2 | |
| config S3C_DEV_I2C3 | |
| bool | |
| help | |
| Compile in platform device definition for I2C controller 3 | |
| config S3C_DEV_I2C4 | |
| bool | |
| help | |
| Compile in platform device definition for I2C controller 4 | |
| config S3C_DEV_I2C5 | |
| bool | |
| help | |
| Compile in platform device definition for I2C controller 5 | |
| config S3C_DEV_I2C6 | |
| bool | |
| help | |
| Compile in platform device definition for I2C controller 6 | |
| config S3C_DEV_I2C7 | |
| bool | |
| help | |
| Compile in platform device definition for I2C controller 7 | |
| config S3C_DEV_FB | |
| bool | |
| help | |
| Compile in platform device definition for framebuffer | |
| config S3C_DEV_USB_HOST | |
| bool | |
| help | |
| Compile in platform device definition for USB host. | |
| config S3C_DEV_USB_HSOTG | |
| bool | |
| help | |
| Compile in platform device definition for USB high-speed OtG | |
| config S3C_DEV_WDT | |
| bool | |
| default y if ARCH_S3C24XX | |
| help | |
| Compile in platform device definition for Watchdog Timer | |
| config S3C_DEV_NAND | |
| bool | |
| help | |
| Compile in platform device definition for NAND controller | |
| config S3C_DEV_ONENAND | |
| bool | |
| help | |
| Compile in platform device definition for OneNAND controller | |
| config S3C_DEV_RTC | |
| bool | |
| help | |
| Compile in platform device definition for RTC | |
| config SAMSUNG_DEV_ADC | |
| bool | |
| help | |
| Compile in platform device definition for ADC controller | |
| config SAMSUNG_DEV_IDE | |
| bool | |
| help | |
| Compile in platform device definitions for IDE | |
| config S3C64XX_DEV_SPI0 | |
| bool | |
| help | |
| Compile in platform device definitions for S3C64XX's type | |
| SPI controller 0 | |
| config S3C64XX_DEV_SPI1 | |
| bool | |
| help | |
| Compile in platform device definitions for S3C64XX's type | |
| SPI controller 1 | |
| config S3C64XX_DEV_SPI2 | |
| bool | |
| help | |
| Compile in platform device definitions for S3C64XX's type | |
| SPI controller 2 | |
| config SAMSUNG_DEV_TS | |
| bool | |
| help | |
| Common in platform device definitions for touchscreen device | |
| config SAMSUNG_DEV_KEYPAD | |
| bool | |
| help | |
| Compile in platform device definitions for keypad | |
| config SAMSUNG_DEV_PWM | |
| bool | |
| default y if ARCH_S3C24XX | |
| help | |
| Compile in platform device definition for PWM Timer | |
| config S3C24XX_PWM | |
| bool "PWM device support" | |
| select PWM | |
| select PWM_SAMSUNG | |
| help | |
| Support for exporting the PWM timer blocks via the pwm device | |
| system | |
| config GPIO_SAMSUNG | |
| def_bool y | |
| config SAMSUNG_PM_GPIO | |
| bool | |
| default y if GPIO_SAMSUNG && PM | |
| help | |
| Include legacy GPIO power management code for platforms not using | |
| pinctrl-samsung driver. | |
| endif | |
| config SAMSUNG_WAKEMASK | |
| bool | |
| depends on PM | |
| help | |
| Compile support for wakeup-mask controls found on the S3C6400 | |
| and above. This code allows a set of interrupt to wakeup-mask | |
| mappings. See <plat/wakeup-mask.h> | |
| endmenu | |
| endif |