| /* | |
| * Board setup routines for the Buffalo Linkstation / Kurobox Platform. | |
| * | |
| * Copyright (C) 2006 G. Liakhovetski (g.liakhovetski@gmx.de) | |
| * | |
| * Based on sandpoint.c by Mark A. Greer | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of | |
| * any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/initrd.h> | |
| #include <linux/of_platform.h> | |
| #include <asm/time.h> | |
| #include <asm/prom.h> | |
| #include <asm/mpic.h> | |
| #include <asm/pci-bridge.h> | |
| #include "mpc10x.h" | |
| static const struct of_device_id of_bus_ids[] __initconst = { | |
| { .type = "soc", }, | |
| { .compatible = "simple-bus", }, | |
| {}, | |
| }; | |
| static int __init declare_of_platform_devices(void) | |
| { | |
| of_platform_bus_probe(NULL, of_bus_ids, NULL); | |
| return 0; | |
| } | |
| machine_device_initcall(linkstation, declare_of_platform_devices); | |
| static int __init linkstation_add_bridge(struct device_node *dev) | |
| { | |
| #ifdef CONFIG_PCI | |
| int len; | |
| struct pci_controller *hose; | |
| const int *bus_range; | |
| printk("Adding PCI host bridge %pOF\n", dev); | |
| bus_range = of_get_property(dev, "bus-range", &len); | |
| if (bus_range == NULL || len < 2 * sizeof(int)) | |
| printk(KERN_WARNING "Can't get bus-range for %pOF, assume" | |
| " bus 0\n", dev); | |
| hose = pcibios_alloc_controller(dev); | |
| if (hose == NULL) | |
| return -ENOMEM; | |
| hose->first_busno = bus_range ? bus_range[0] : 0; | |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; | |
| setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0); | |
| /* Interpret the "ranges" property */ | |
| /* This also maps the I/O region and sets isa_io/mem_base */ | |
| pci_process_bridge_OF_ranges(hose, dev, 1); | |
| #endif | |
| return 0; | |
| } | |
| static void __init linkstation_setup_arch(void) | |
| { | |
| printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); | |
| printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); | |
| } | |
| static void __init linkstation_setup_pci(void) | |
| { | |
| struct device_node *np; | |
| /* Lookup PCI host bridges */ | |
| for_each_compatible_node(np, "pci", "mpc10x-pci") | |
| linkstation_add_bridge(np); | |
| } | |
| /* | |
| * Interrupt setup and service. Interrupts on the linkstation come | |
| * from the four PCI slots plus onboard 8241 devices: I2C, DUART. | |
| */ | |
| static void __init linkstation_init_IRQ(void) | |
| { | |
| struct mpic *mpic; | |
| mpic = mpic_alloc(NULL, 0, 0, 4, 0, " EPIC "); | |
| BUG_ON(mpic == NULL); | |
| /* PCI IRQs */ | |
| mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); | |
| /* I2C */ | |
| mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); | |
| /* ttyS0, ttyS1 */ | |
| mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100); | |
| mpic_init(mpic); | |
| } | |
| extern void avr_uart_configure(void); | |
| extern void avr_uart_send(const char); | |
| static void __noreturn linkstation_restart(char *cmd) | |
| { | |
| local_irq_disable(); | |
| /* Reset system via AVR */ | |
| avr_uart_configure(); | |
| /* Send reboot command */ | |
| avr_uart_send('C'); | |
| for(;;) /* Spin until reset happens */ | |
| avr_uart_send('G'); /* "kick" */ | |
| } | |
| static void __noreturn linkstation_power_off(void) | |
| { | |
| local_irq_disable(); | |
| /* Power down system via AVR */ | |
| avr_uart_configure(); | |
| /* send shutdown command */ | |
| avr_uart_send('E'); | |
| for(;;) /* Spin until power-off happens */ | |
| avr_uart_send('G'); /* "kick" */ | |
| /* NOTREACHED */ | |
| } | |
| static void __noreturn linkstation_halt(void) | |
| { | |
| linkstation_power_off(); | |
| /* NOTREACHED */ | |
| } | |
| static void linkstation_show_cpuinfo(struct seq_file *m) | |
| { | |
| seq_printf(m, "vendor\t\t: Buffalo Technology\n"); | |
| seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n"); | |
| } | |
| static int __init linkstation_probe(void) | |
| { | |
| if (!of_machine_is_compatible("linkstation")) | |
| return 0; | |
| pm_power_off = linkstation_power_off; | |
| return 1; | |
| } | |
| define_machine(linkstation){ | |
| .name = "Buffalo Linkstation", | |
| .probe = linkstation_probe, | |
| .setup_arch = linkstation_setup_arch, | |
| .discover_phbs = linkstation_setup_pci, | |
| .init_IRQ = linkstation_init_IRQ, | |
| .show_cpuinfo = linkstation_show_cpuinfo, | |
| .get_irq = mpic_get_irq, | |
| .restart = linkstation_restart, | |
| .halt = linkstation_halt, | |
| .calibrate_decr = generic_calibrate_decr, | |
| }; |