| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * mpc7448_hpc2.c | |
| * | |
| * Board setup routines for the Freescale mpc7448hpc2(taiga) platform | |
| * | |
| * Author: Jacob Pan | |
| * jacob.pan@freescale.com | |
| * Author: Xianghua Xiao | |
| * x.xiao@freescale.com | |
| * Maintainer: Roy Zang <tie-fei.zang@freescale.com> | |
| * Add Flat Device Tree support fot mpc7448hpc2 board | |
| * | |
| * Copyright 2004-2006 Freescale Semiconductor, Inc. | |
| */ | |
| #include <linux/stddef.h> | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/console.h> | |
| #include <linux/extable.h> | |
| #include <linux/delay.h> | |
| #include <linux/irq.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/root_dev.h> | |
| #include <linux/serial.h> | |
| #include <linux/tty.h> | |
| #include <linux/serial_core.h> | |
| #include <asm/time.h> | |
| #include <asm/machdep.h> | |
| #include <asm/prom.h> | |
| #include <asm/udbg.h> | |
| #include <asm/tsi108.h> | |
| #include <asm/pci-bridge.h> | |
| #include <asm/reg.h> | |
| #include <mm/mmu_decl.h> | |
| #include <asm/tsi108_pci.h> | |
| #include <asm/tsi108_irq.h> | |
| #include <asm/mpic.h> | |
| #undef DEBUG | |
| #ifdef DEBUG | |
| #define DBG(fmt...) do { printk(fmt); } while(0) | |
| #else | |
| #define DBG(fmt...) do { } while(0) | |
| #endif | |
| #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000 | |
| int mpc7448_hpc2_exclude_device(struct pci_controller *hose, | |
| u_char bus, u_char devfn) | |
| { | |
| if (bus == 0 && PCI_SLOT(devfn) == 0) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| else | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| static void __init mpc7448_hpc2_setup_pci(void) | |
| { | |
| #ifdef CONFIG_PCI | |
| struct device_node *np; | |
| if (ppc_md.progress) | |
| ppc_md.progress("mpc7448_hpc2_setup_pci():set_bridge", 0); | |
| /* setup PCI host bridge */ | |
| for_each_compatible_node(np, "pci", "tsi108-pci") | |
| tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0); | |
| ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; | |
| if (ppc_md.progress) | |
| ppc_md.progress("tsi108: resources set", 0x100); | |
| #endif | |
| } | |
| static void __init mpc7448_hpc2_setup_arch(void) | |
| { | |
| tsi108_csr_vir_base = get_vir_csrbase(); | |
| printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); | |
| printk(KERN_INFO | |
| "Jointly ported by Freescale and Tundra Semiconductor\n"); | |
| printk(KERN_INFO | |
| "Enabling L2 cache then enabling the HID0 prefetch engine.\n"); | |
| } | |
| /* | |
| * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come | |
| * from the four external INT pins, PCI interrupts are routed via | |
| * PCI interrupt control registers, it generates internal IRQ23 | |
| * | |
| * Interrupt routing on the Taiga Board: | |
| * TSI108:PB_INT[0] -> CPU0:INT# | |
| * TSI108:PB_INT[1] -> CPU0:MCP# | |
| * TSI108:PB_INT[2] -> N/C | |
| * TSI108:PB_INT[3] -> N/C | |
| */ | |
| static void __init mpc7448_hpc2_init_IRQ(void) | |
| { | |
| struct mpic *mpic; | |
| #ifdef CONFIG_PCI | |
| unsigned int cascade_pci_irq; | |
| struct device_node *tsi_pci; | |
| struct device_node *cascade_node = NULL; | |
| #endif | |
| mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | | |
| MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, | |
| 24, 0, | |
| "Tsi108_PIC"); | |
| BUG_ON(mpic == NULL); | |
| mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); | |
| mpic_init(mpic); | |
| #ifdef CONFIG_PCI | |
| tsi_pci = of_find_node_by_type(NULL, "pci"); | |
| if (tsi_pci == NULL) { | |
| printk("%s: No tsi108 pci node found !\n", __func__); | |
| return; | |
| } | |
| cascade_node = of_find_node_by_type(NULL, "pic-router"); | |
| if (cascade_node == NULL) { | |
| printk("%s: No tsi108 pci cascade node found !\n", __func__); | |
| return; | |
| } | |
| cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); | |
| DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, | |
| (u32) cascade_pci_irq); | |
| tsi108_pci_int_init(cascade_node); | |
| irq_set_handler_data(cascade_pci_irq, mpic); | |
| irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); | |
| #endif | |
| /* Configure MPIC outputs to CPU0 */ | |
| tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); | |
| } | |
| void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) | |
| { | |
| seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); | |
| } | |
| static void __noreturn mpc7448_hpc2_restart(char *cmd) | |
| { | |
| local_irq_disable(); | |
| /* Set exception prefix high - to the firmware */ | |
| mtmsr(mfmsr() | MSR_IP); | |
| isync(); | |
| for (;;) ; /* Spin until reset happens */ | |
| } | |
| /* | |
| * Called very early, device-tree isn't unflattened | |
| */ | |
| static int __init mpc7448_hpc2_probe(void) | |
| { | |
| if (!of_machine_is_compatible("mpc74xx")) | |
| return 0; | |
| return 1; | |
| } | |
| static int mpc7448_machine_check_exception(struct pt_regs *regs) | |
| { | |
| const struct exception_table_entry *entry; | |
| /* Are we prepared to handle this fault */ | |
| if ((entry = search_exception_tables(regs->nip)) != NULL) { | |
| tsi108_clear_pci_cfg_error(); | |
| regs->msr |= MSR_RI; | |
| regs->nip = extable_fixup(entry); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| define_machine(mpc7448_hpc2){ | |
| .name = "MPC7448 HPC2", | |
| .probe = mpc7448_hpc2_probe, | |
| .setup_arch = mpc7448_hpc2_setup_arch, | |
| .discover_phbs = mpc7448_hpc2_setup_pci, | |
| .init_IRQ = mpc7448_hpc2_init_IRQ, | |
| .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, | |
| .get_irq = mpic_get_irq, | |
| .restart = mpc7448_hpc2_restart, | |
| .calibrate_decr = generic_calibrate_decr, | |
| .machine_check_exception= mpc7448_machine_check_exception, | |
| .progress = udbg_progress, | |
| }; |