| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * cx18 buffer queues | |
| * | |
| * Derived from ivtv-queue.c | |
| * | |
| * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> | |
| * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net> | |
| */ | |
| #include "cx18-driver.h" | |
| #include "cx18-queue.h" | |
| #include "cx18-streams.h" | |
| #include "cx18-scb.h" | |
| #include "cx18-io.h" | |
| void cx18_buf_swap(struct cx18_buffer *buf) | |
| { | |
| int i; | |
| for (i = 0; i < buf->bytesused; i += 4) | |
| swab32s((u32 *)(buf->buf + i)); | |
| } | |
| void _cx18_mdl_swap(struct cx18_mdl *mdl) | |
| { | |
| struct cx18_buffer *buf; | |
| list_for_each_entry(buf, &mdl->buf_list, list) { | |
| if (buf->bytesused == 0) | |
| break; | |
| cx18_buf_swap(buf); | |
| } | |
| } | |
| void cx18_queue_init(struct cx18_queue *q) | |
| { | |
| INIT_LIST_HEAD(&q->list); | |
| atomic_set(&q->depth, 0); | |
| q->bytesused = 0; | |
| } | |
| struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl, | |
| struct cx18_queue *q, int to_front) | |
| { | |
| /* clear the mdl if it is not to be enqueued to the full queue */ | |
| if (q != &s->q_full) { | |
| mdl->bytesused = 0; | |
| mdl->readpos = 0; | |
| mdl->m_flags = 0; | |
| mdl->skipped = 0; | |
| mdl->curr_buf = NULL; | |
| } | |
| /* q_busy is restricted to a max buffer count imposed by firmware */ | |
| if (q == &s->q_busy && | |
| atomic_read(&q->depth) >= CX18_MAX_FW_MDLS_PER_STREAM) | |
| q = &s->q_free; | |
| spin_lock(&q->lock); | |
| if (to_front) | |
| list_add(&mdl->list, &q->list); /* LIFO */ | |
| else | |
| list_add_tail(&mdl->list, &q->list); /* FIFO */ | |
| q->bytesused += mdl->bytesused - mdl->readpos; | |
| atomic_inc(&q->depth); | |
| spin_unlock(&q->lock); | |
| return q; | |
| } | |
| struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) | |
| { | |
| struct cx18_mdl *mdl = NULL; | |
| spin_lock(&q->lock); | |
| if (!list_empty(&q->list)) { | |
| mdl = list_first_entry(&q->list, struct cx18_mdl, list); | |
| list_del_init(&mdl->list); | |
| q->bytesused -= mdl->bytesused - mdl->readpos; | |
| mdl->skipped = 0; | |
| atomic_dec(&q->depth); | |
| } | |
| spin_unlock(&q->lock); | |
| return mdl; | |
| } | |
| static void _cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s, | |
| struct cx18_mdl *mdl) | |
| { | |
| struct cx18_buffer *buf; | |
| u32 buf_size = s->buf_size; | |
| u32 bytesused = mdl->bytesused; | |
| list_for_each_entry(buf, &mdl->buf_list, list) { | |
| buf->readpos = 0; | |
| if (bytesused >= buf_size) { | |
| buf->bytesused = buf_size; | |
| bytesused -= buf_size; | |
| } else { | |
| buf->bytesused = bytesused; | |
| bytesused = 0; | |
| } | |
| cx18_buf_sync_for_cpu(s, buf); | |
| } | |
| } | |
| static inline void cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s, | |
| struct cx18_mdl *mdl) | |
| { | |
| struct cx18_buffer *buf; | |
| if (list_is_singular(&mdl->buf_list)) { | |
| buf = list_first_entry(&mdl->buf_list, struct cx18_buffer, | |
| list); | |
| buf->bytesused = mdl->bytesused; | |
| buf->readpos = 0; | |
| cx18_buf_sync_for_cpu(s, buf); | |
| } else { | |
| _cx18_mdl_update_bufs_for_cpu(s, mdl); | |
| } | |
| } | |
| struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id, | |
| u32 bytesused) | |
| { | |
| struct cx18 *cx = s->cx; | |
| struct cx18_mdl *mdl; | |
| struct cx18_mdl *tmp; | |
| struct cx18_mdl *ret = NULL; | |
| LIST_HEAD(sweep_up); | |
| /* | |
| * We don't have to acquire multiple q locks here, because we are | |
| * serialized by the single threaded work handler. | |
| * MDLs from the firmware will thus remain in order as | |
| * they are moved from q_busy to q_full or to the dvb ring buffer. | |
| */ | |
| spin_lock(&s->q_busy.lock); | |
| list_for_each_entry_safe(mdl, tmp, &s->q_busy.list, list) { | |
| /* | |
| * We should find what the firmware told us is done, | |
| * right at the front of the queue. If we don't, we likely have | |
| * missed an mdl done message from the firmware. | |
| * Once we skip an mdl repeatedly, relative to the size of | |
| * q_busy, we have high confidence we've missed it. | |
| */ | |
| if (mdl->id != id) { | |
| mdl->skipped++; | |
| if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) { | |
| /* mdl must have fallen out of rotation */ | |
| CX18_WARN("Skipped %s, MDL %d, %d times - it must have dropped out of rotation\n", | |
| s->name, mdl->id, | |
| mdl->skipped); | |
| /* Sweep it up to put it back into rotation */ | |
| list_move_tail(&mdl->list, &sweep_up); | |
| atomic_dec(&s->q_busy.depth); | |
| } | |
| continue; | |
| } | |
| /* | |
| * We pull the desired mdl off of the queue here. Something | |
| * will have to put it back on a queue later. | |
| */ | |
| list_del_init(&mdl->list); | |
| atomic_dec(&s->q_busy.depth); | |
| ret = mdl; | |
| break; | |
| } | |
| spin_unlock(&s->q_busy.lock); | |
| /* | |
| * We found the mdl for which we were looking. Get it ready for | |
| * the caller to put on q_full or in the dvb ring buffer. | |
| */ | |
| if (ret != NULL) { | |
| ret->bytesused = bytesused; | |
| ret->skipped = 0; | |
| /* 0'ed readpos, m_flags & curr_buf when mdl went on q_busy */ | |
| cx18_mdl_update_bufs_for_cpu(s, ret); | |
| if (s->type != CX18_ENC_STREAM_TYPE_TS) | |
| set_bit(CX18_F_M_NEED_SWAP, &ret->m_flags); | |
| } | |
| /* Put any mdls the firmware is ignoring back into normal rotation */ | |
| list_for_each_entry_safe(mdl, tmp, &sweep_up, list) { | |
| list_del_init(&mdl->list); | |
| cx18_enqueue(s, mdl, &s->q_free); | |
| } | |
| return ret; | |
| } | |
| /* Move all mdls of a queue, while flushing the mdl */ | |
| static void cx18_queue_flush(struct cx18_stream *s, | |
| struct cx18_queue *q_src, struct cx18_queue *q_dst) | |
| { | |
| struct cx18_mdl *mdl; | |
| /* It only makes sense to flush to q_free or q_idle */ | |
| if (q_src == q_dst || q_dst == &s->q_full || q_dst == &s->q_busy) | |
| return; | |
| spin_lock(&q_src->lock); | |
| spin_lock(&q_dst->lock); | |
| while (!list_empty(&q_src->list)) { | |
| mdl = list_first_entry(&q_src->list, struct cx18_mdl, list); | |
| list_move_tail(&mdl->list, &q_dst->list); | |
| mdl->bytesused = 0; | |
| mdl->readpos = 0; | |
| mdl->m_flags = 0; | |
| mdl->skipped = 0; | |
| mdl->curr_buf = NULL; | |
| atomic_inc(&q_dst->depth); | |
| } | |
| cx18_queue_init(q_src); | |
| spin_unlock(&q_src->lock); | |
| spin_unlock(&q_dst->lock); | |
| } | |
| void cx18_flush_queues(struct cx18_stream *s) | |
| { | |
| cx18_queue_flush(s, &s->q_busy, &s->q_free); | |
| cx18_queue_flush(s, &s->q_full, &s->q_free); | |
| } | |
| /* | |
| * Note, s->buf_pool is not protected by a lock, | |
| * the stream better not have *anything* going on when calling this | |
| */ | |
| void cx18_unload_queues(struct cx18_stream *s) | |
| { | |
| struct cx18_queue *q_idle = &s->q_idle; | |
| struct cx18_mdl *mdl; | |
| struct cx18_buffer *buf; | |
| /* Move all MDLS to q_idle */ | |
| cx18_queue_flush(s, &s->q_busy, q_idle); | |
| cx18_queue_flush(s, &s->q_full, q_idle); | |
| cx18_queue_flush(s, &s->q_free, q_idle); | |
| /* Reset MDL id's and move all buffers back to the stream's buf_pool */ | |
| spin_lock(&q_idle->lock); | |
| list_for_each_entry(mdl, &q_idle->list, list) { | |
| while (!list_empty(&mdl->buf_list)) { | |
| buf = list_first_entry(&mdl->buf_list, | |
| struct cx18_buffer, list); | |
| list_move_tail(&buf->list, &s->buf_pool); | |
| buf->bytesused = 0; | |
| buf->readpos = 0; | |
| } | |
| mdl->id = s->mdl_base_idx; /* reset id to a "safe" value */ | |
| /* all other mdl fields were cleared by cx18_queue_flush() */ | |
| } | |
| spin_unlock(&q_idle->lock); | |
| } | |
| /* | |
| * Note, s->buf_pool is not protected by a lock, | |
| * the stream better not have *anything* going on when calling this | |
| */ | |
| void cx18_load_queues(struct cx18_stream *s) | |
| { | |
| struct cx18 *cx = s->cx; | |
| struct cx18_mdl *mdl; | |
| struct cx18_buffer *buf; | |
| int mdl_id; | |
| int i; | |
| u32 partial_buf_size; | |
| /* | |
| * Attach buffers to MDLs, give the MDLs ids, and add MDLs to q_free | |
| * Excess MDLs are left on q_idle | |
| * Excess buffers are left in buf_pool and/or on an MDL in q_idle | |
| */ | |
| mdl_id = s->mdl_base_idx; | |
| for (mdl = cx18_dequeue(s, &s->q_idle), i = s->bufs_per_mdl; | |
| mdl != NULL && i == s->bufs_per_mdl; | |
| mdl = cx18_dequeue(s, &s->q_idle)) { | |
| mdl->id = mdl_id; | |
| for (i = 0; i < s->bufs_per_mdl; i++) { | |
| if (list_empty(&s->buf_pool)) | |
| break; | |
| buf = list_first_entry(&s->buf_pool, struct cx18_buffer, | |
| list); | |
| list_move_tail(&buf->list, &mdl->buf_list); | |
| /* update the firmware's MDL array with this buffer */ | |
| cx18_writel(cx, buf->dma_handle, | |
| &cx->scb->cpu_mdl[mdl_id + i].paddr); | |
| cx18_writel(cx, s->buf_size, | |
| &cx->scb->cpu_mdl[mdl_id + i].length); | |
| } | |
| if (i == s->bufs_per_mdl) { | |
| /* | |
| * The encoder doesn't honor s->mdl_size. So in the | |
| * case of a non-integral number of buffers to meet | |
| * mdl_size, we lie about the size of the last buffer | |
| * in the MDL to get the encoder to really only send | |
| * us mdl_size bytes per MDL transfer. | |
| */ | |
| partial_buf_size = s->mdl_size % s->buf_size; | |
| if (partial_buf_size) { | |
| cx18_writel(cx, partial_buf_size, | |
| &cx->scb->cpu_mdl[mdl_id + i - 1].length); | |
| } | |
| cx18_enqueue(s, mdl, &s->q_free); | |
| } else { | |
| /* Not enough buffers for this MDL; we won't use it */ | |
| cx18_push(s, mdl, &s->q_idle); | |
| } | |
| mdl_id += i; | |
| } | |
| } | |
| void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl) | |
| { | |
| int dma = s->dma; | |
| u32 buf_size = s->buf_size; | |
| struct pci_dev *pci_dev = s->cx->pci_dev; | |
| struct cx18_buffer *buf; | |
| list_for_each_entry(buf, &mdl->buf_list, list) | |
| pci_dma_sync_single_for_device(pci_dev, buf->dma_handle, | |
| buf_size, dma); | |
| } | |
| int cx18_stream_alloc(struct cx18_stream *s) | |
| { | |
| struct cx18 *cx = s->cx; | |
| int i; | |
| if (s->buffers == 0) | |
| return 0; | |
| CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%d.%02d kB total)\n", | |
| s->name, s->buffers, s->buf_size, | |
| s->buffers * s->buf_size / 1024, | |
| (s->buffers * s->buf_size * 100 / 1024) % 100); | |
| if (((char __iomem *)&cx->scb->cpu_mdl[cx->free_mdl_idx + s->buffers] - | |
| (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) { | |
| unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE - | |
| ((char __iomem *)cx->scb->cpu_mdl)); | |
| CX18_ERR("Too many buffers, cannot fit in SCB area\n"); | |
| CX18_ERR("Max buffers = %zu\n", | |
| bufsz / sizeof(struct cx18_mdl_ent)); | |
| return -ENOMEM; | |
| } | |
| s->mdl_base_idx = cx->free_mdl_idx; | |
| /* allocate stream buffers and MDLs */ | |
| for (i = 0; i < s->buffers; i++) { | |
| struct cx18_mdl *mdl; | |
| struct cx18_buffer *buf; | |
| /* 1 MDL per buffer to handle the worst & also default case */ | |
| mdl = kzalloc(sizeof(struct cx18_mdl), GFP_KERNEL|__GFP_NOWARN); | |
| if (mdl == NULL) | |
| break; | |
| buf = kzalloc(sizeof(struct cx18_buffer), | |
| GFP_KERNEL|__GFP_NOWARN); | |
| if (buf == NULL) { | |
| kfree(mdl); | |
| break; | |
| } | |
| buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN); | |
| if (buf->buf == NULL) { | |
| kfree(mdl); | |
| kfree(buf); | |
| break; | |
| } | |
| INIT_LIST_HEAD(&mdl->list); | |
| INIT_LIST_HEAD(&mdl->buf_list); | |
| mdl->id = s->mdl_base_idx; /* a somewhat safe value */ | |
| cx18_enqueue(s, mdl, &s->q_idle); | |
| INIT_LIST_HEAD(&buf->list); | |
| buf->dma_handle = pci_map_single(s->cx->pci_dev, | |
| buf->buf, s->buf_size, s->dma); | |
| cx18_buf_sync_for_cpu(s, buf); | |
| list_add_tail(&buf->list, &s->buf_pool); | |
| } | |
| if (i == s->buffers) { | |
| cx->free_mdl_idx += s->buffers; | |
| return 0; | |
| } | |
| CX18_ERR("Couldn't allocate buffers for %s stream\n", s->name); | |
| cx18_stream_free(s); | |
| return -ENOMEM; | |
| } | |
| void cx18_stream_free(struct cx18_stream *s) | |
| { | |
| struct cx18_mdl *mdl; | |
| struct cx18_buffer *buf; | |
| struct cx18 *cx = s->cx; | |
| CX18_DEBUG_INFO("Deallocating buffers for %s stream\n", s->name); | |
| /* move all buffers to buf_pool and all MDLs to q_idle */ | |
| cx18_unload_queues(s); | |
| /* empty q_idle */ | |
| while ((mdl = cx18_dequeue(s, &s->q_idle))) | |
| kfree(mdl); | |
| /* empty buf_pool */ | |
| while (!list_empty(&s->buf_pool)) { | |
| buf = list_first_entry(&s->buf_pool, struct cx18_buffer, list); | |
| list_del_init(&buf->list); | |
| pci_unmap_single(s->cx->pci_dev, buf->dma_handle, | |
| s->buf_size, s->dma); | |
| kfree(buf->buf); | |
| kfree(buf); | |
| } | |
| } |