| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * S5P/EXYNOS4 SoC series camera host interface media device driver | |
| * | |
| * Copyright (C) 2011 - 2013 Samsung Electronics Co., Ltd. | |
| * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> | |
| */ | |
| #include <linux/bug.h> | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/device.h> | |
| #include <linux/errno.h> | |
| #include <linux/i2c.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_graph.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <media/v4l2-async.h> | |
| #include <media/v4l2-ctrls.h> | |
| #include <media/v4l2-fwnode.h> | |
| #include <media/media-device.h> | |
| #include <media/drv-intf/exynos-fimc.h> | |
| #include "media-dev.h" | |
| #include "fimc-core.h" | |
| #include "fimc-is.h" | |
| #include "fimc-lite.h" | |
| #include "mipi-csis.h" | |
| /* Set up image sensor subdev -> FIMC capture node notifications. */ | |
| static void __setup_sensor_notification(struct fimc_md *fmd, | |
| struct v4l2_subdev *sensor, | |
| struct v4l2_subdev *fimc_sd) | |
| { | |
| struct fimc_source_info *src_inf; | |
| struct fimc_sensor_info *md_si; | |
| unsigned long flags; | |
| src_inf = v4l2_get_subdev_hostdata(sensor); | |
| if (!src_inf || WARN_ON(fmd == NULL)) | |
| return; | |
| md_si = source_to_sensor_info(src_inf); | |
| spin_lock_irqsave(&fmd->slock, flags); | |
| md_si->host = v4l2_get_subdevdata(fimc_sd); | |
| spin_unlock_irqrestore(&fmd->slock, flags); | |
| } | |
| /** | |
| * fimc_pipeline_prepare - update pipeline information with subdevice pointers | |
| * @p: fimc pipeline | |
| * @me: media entity terminating the pipeline | |
| * | |
| * Caller holds the graph mutex. | |
| */ | |
| static void fimc_pipeline_prepare(struct fimc_pipeline *p, | |
| struct media_entity *me) | |
| { | |
| struct fimc_md *fmd = entity_to_fimc_mdev(me); | |
| struct v4l2_subdev *sd; | |
| struct v4l2_subdev *sensor = NULL; | |
| int i; | |
| for (i = 0; i < IDX_MAX; i++) | |
| p->subdevs[i] = NULL; | |
| while (1) { | |
| struct media_pad *pad = NULL; | |
| /* Find remote source pad */ | |
| for (i = 0; i < me->num_pads; i++) { | |
| struct media_pad *spad = &me->pads[i]; | |
| if (!(spad->flags & MEDIA_PAD_FL_SINK)) | |
| continue; | |
| pad = media_entity_remote_pad(spad); | |
| if (pad) | |
| break; | |
| } | |
| if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) | |
| break; | |
| sd = media_entity_to_v4l2_subdev(pad->entity); | |
| switch (sd->grp_id) { | |
| case GRP_ID_SENSOR: | |
| sensor = sd; | |
| fallthrough; | |
| case GRP_ID_FIMC_IS_SENSOR: | |
| p->subdevs[IDX_SENSOR] = sd; | |
| break; | |
| case GRP_ID_CSIS: | |
| p->subdevs[IDX_CSIS] = sd; | |
| break; | |
| case GRP_ID_FLITE: | |
| p->subdevs[IDX_FLITE] = sd; | |
| break; | |
| case GRP_ID_FIMC: | |
| p->subdevs[IDX_FIMC] = sd; | |
| break; | |
| case GRP_ID_FIMC_IS: | |
| p->subdevs[IDX_IS_ISP] = sd; | |
| break; | |
| default: | |
| break; | |
| } | |
| me = &sd->entity; | |
| if (me->num_pads == 1) | |
| break; | |
| } | |
| if (sensor && p->subdevs[IDX_FIMC]) | |
| __setup_sensor_notification(fmd, sensor, p->subdevs[IDX_FIMC]); | |
| } | |
| /** | |
| * __subdev_set_power - change power state of a single subdev | |
| * @sd: subdevice to change power state for | |
| * @on: 1 to enable power or 0 to disable | |
| * | |
| * Return result of s_power subdev operation or -ENXIO if sd argument | |
| * is NULL. Return 0 if the subdevice does not implement s_power. | |
| */ | |
| static int __subdev_set_power(struct v4l2_subdev *sd, int on) | |
| { | |
| int *use_count; | |
| int ret; | |
| if (sd == NULL) | |
| return -ENXIO; | |
| use_count = &sd->entity.use_count; | |
| if (on && (*use_count)++ > 0) | |
| return 0; | |
| else if (!on && (*use_count == 0 || --(*use_count) > 0)) | |
| return 0; | |
| ret = v4l2_subdev_call(sd, core, s_power, on); | |
| return ret != -ENOIOCTLCMD ? ret : 0; | |
| } | |
| /** | |
| * fimc_pipeline_s_power - change power state of all pipeline subdevs | |
| * @p: fimc device terminating the pipeline | |
| * @on: true to power on, false to power off | |
| * | |
| * Needs to be called with the graph mutex held. | |
| */ | |
| static int fimc_pipeline_s_power(struct fimc_pipeline *p, bool on) | |
| { | |
| static const u8 seq[2][IDX_MAX - 1] = { | |
| { IDX_IS_ISP, IDX_SENSOR, IDX_CSIS, IDX_FLITE }, | |
| { IDX_CSIS, IDX_FLITE, IDX_SENSOR, IDX_IS_ISP }, | |
| }; | |
| int i, ret = 0; | |
| if (p->subdevs[IDX_SENSOR] == NULL) | |
| return -ENXIO; | |
| for (i = 0; i < IDX_MAX - 1; i++) { | |
| unsigned int idx = seq[on][i]; | |
| ret = __subdev_set_power(p->subdevs[idx], on); | |
| if (ret < 0 && ret != -ENXIO) | |
| goto error; | |
| } | |
| return 0; | |
| error: | |
| for (; i >= 0; i--) { | |
| unsigned int idx = seq[on][i]; | |
| __subdev_set_power(p->subdevs[idx], !on); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * __fimc_pipeline_enable - enable power of all pipeline subdevs | |
| * and the sensor clock | |
| * @ep: video pipeline structure | |
| * @fmd: fimc media device | |
| * | |
| * Called with the graph mutex held. | |
| */ | |
| static int __fimc_pipeline_enable(struct exynos_media_pipeline *ep, | |
| struct fimc_md *fmd) | |
| { | |
| struct fimc_pipeline *p = to_fimc_pipeline(ep); | |
| int ret; | |
| /* Enable PXLASYNC clock if this pipeline includes FIMC-IS */ | |
| if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP]) { | |
| ret = clk_prepare_enable(fmd->wbclk[CLK_IDX_WB_B]); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| ret = fimc_pipeline_s_power(p, 1); | |
| if (!ret) | |
| return 0; | |
| if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP]) | |
| clk_disable_unprepare(fmd->wbclk[CLK_IDX_WB_B]); | |
| return ret; | |
| } | |
| /** | |
| * __fimc_pipeline_open - update the pipeline information, enable power | |
| * of all pipeline subdevs and the sensor clock | |
| * @ep: fimc device terminating the pipeline | |
| * @me: media entity to start graph walk with | |
| * @prepare: true to walk the current pipeline and acquire all subdevs | |
| * | |
| * Called with the graph mutex held. | |
| */ | |
| static int __fimc_pipeline_open(struct exynos_media_pipeline *ep, | |
| struct media_entity *me, bool prepare) | |
| { | |
| struct fimc_md *fmd = entity_to_fimc_mdev(me); | |
| struct fimc_pipeline *p = to_fimc_pipeline(ep); | |
| struct v4l2_subdev *sd; | |
| if (WARN_ON(p == NULL || me == NULL)) | |
| return -EINVAL; | |
| if (prepare) | |
| fimc_pipeline_prepare(p, me); | |
| sd = p->subdevs[IDX_SENSOR]; | |
| if (sd == NULL) { | |
| pr_warn("%s(): No sensor subdev\n", __func__); | |
| /* | |
| * Pipeline open cannot fail so as to make it possible | |
| * for the user space to configure the pipeline. | |
| */ | |
| return 0; | |
| } | |
| return __fimc_pipeline_enable(ep, fmd); | |
| } | |
| /** | |
| * __fimc_pipeline_close - disable the sensor clock and pipeline power | |
| * @ep: fimc device terminating the pipeline | |
| * | |
| * Disable power of all subdevs and turn the external sensor clock off. | |
| */ | |
| static int __fimc_pipeline_close(struct exynos_media_pipeline *ep) | |
| { | |
| struct fimc_pipeline *p = to_fimc_pipeline(ep); | |
| struct v4l2_subdev *sd = p ? p->subdevs[IDX_SENSOR] : NULL; | |
| struct fimc_md *fmd; | |
| int ret; | |
| if (sd == NULL) { | |
| pr_warn("%s(): No sensor subdev\n", __func__); | |
| return 0; | |
| } | |
| ret = fimc_pipeline_s_power(p, 0); | |
| fmd = entity_to_fimc_mdev(&sd->entity); | |
| /* Disable PXLASYNC clock if this pipeline includes FIMC-IS */ | |
| if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP]) | |
| clk_disable_unprepare(fmd->wbclk[CLK_IDX_WB_B]); | |
| return ret == -ENXIO ? 0 : ret; | |
| } | |
| /** | |
| * __fimc_pipeline_s_stream - call s_stream() on pipeline subdevs | |
| * @ep: video pipeline structure | |
| * @on: passed as the s_stream() callback argument | |
| */ | |
| static int __fimc_pipeline_s_stream(struct exynos_media_pipeline *ep, bool on) | |
| { | |
| static const u8 seq[2][IDX_MAX] = { | |
| { IDX_FIMC, IDX_SENSOR, IDX_IS_ISP, IDX_CSIS, IDX_FLITE }, | |
| { IDX_CSIS, IDX_FLITE, IDX_FIMC, IDX_SENSOR, IDX_IS_ISP }, | |
| }; | |
| struct fimc_pipeline *p = to_fimc_pipeline(ep); | |
| enum fimc_subdev_index sd_id; | |
| int i, ret = 0; | |
| if (p->subdevs[IDX_SENSOR] == NULL) { | |
| struct fimc_md *fmd; | |
| struct v4l2_subdev *sd = p->subdevs[IDX_CSIS]; | |
| if (!sd) | |
| sd = p->subdevs[IDX_FIMC]; | |
| if (!sd) { | |
| /* | |
| * If neither CSIS nor FIMC was set up, | |
| * it's impossible to have any sensors | |
| */ | |
| return -ENODEV; | |
| } | |
| fmd = entity_to_fimc_mdev(&sd->entity); | |
| if (!fmd->user_subdev_api) { | |
| /* | |
| * Sensor must be already discovered if we | |
| * aren't in the user_subdev_api mode | |
| */ | |
| return -ENODEV; | |
| } | |
| /* Get pipeline sink entity */ | |
| if (p->subdevs[IDX_FIMC]) | |
| sd_id = IDX_FIMC; | |
| else if (p->subdevs[IDX_IS_ISP]) | |
| sd_id = IDX_IS_ISP; | |
| else if (p->subdevs[IDX_FLITE]) | |
| sd_id = IDX_FLITE; | |
| else | |
| return -ENODEV; | |
| /* | |
| * Sensor could have been linked between open and STREAMON - | |
| * check if this is the case. | |
| */ | |
| fimc_pipeline_prepare(p, &p->subdevs[sd_id]->entity); | |
| if (p->subdevs[IDX_SENSOR] == NULL) | |
| return -ENODEV; | |
| ret = __fimc_pipeline_enable(ep, fmd); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| for (i = 0; i < IDX_MAX; i++) { | |
| unsigned int idx = seq[on][i]; | |
| ret = v4l2_subdev_call(p->subdevs[idx], video, s_stream, on); | |
| if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) | |
| goto error; | |
| } | |
| return 0; | |
| error: | |
| fimc_pipeline_s_power(p, !on); | |
| for (; i >= 0; i--) { | |
| unsigned int idx = seq[on][i]; | |
| v4l2_subdev_call(p->subdevs[idx], video, s_stream, !on); | |
| } | |
| return ret; | |
| } | |
| /* Media pipeline operations for the FIMC/FIMC-LITE video device driver */ | |
| static const struct exynos_media_pipeline_ops fimc_pipeline_ops = { | |
| .open = __fimc_pipeline_open, | |
| .close = __fimc_pipeline_close, | |
| .set_stream = __fimc_pipeline_s_stream, | |
| }; | |
| static struct exynos_media_pipeline *fimc_md_pipeline_create( | |
| struct fimc_md *fmd) | |
| { | |
| struct fimc_pipeline *p; | |
| p = kzalloc(sizeof(*p), GFP_KERNEL); | |
| if (!p) | |
| return NULL; | |
| list_add_tail(&p->list, &fmd->pipelines); | |
| p->ep.ops = &fimc_pipeline_ops; | |
| return &p->ep; | |
| } | |
| static void fimc_md_pipelines_free(struct fimc_md *fmd) | |
| { | |
| while (!list_empty(&fmd->pipelines)) { | |
| struct fimc_pipeline *p; | |
| p = list_entry(fmd->pipelines.next, typeof(*p), list); | |
| list_del(&p->list); | |
| kfree(p); | |
| } | |
| } | |
| static int fimc_md_parse_one_endpoint(struct fimc_md *fmd, | |
| struct device_node *ep) | |
| { | |
| int index = fmd->num_sensors; | |
| struct fimc_source_info *pd = &fmd->sensor[index].pdata; | |
| struct device_node *rem, *np; | |
| struct v4l2_async_subdev *asd; | |
| struct v4l2_fwnode_endpoint endpoint = { .bus_type = 0 }; | |
| int ret; | |
| ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &endpoint); | |
| if (ret) { | |
| of_node_put(ep); | |
| return ret; | |
| } | |
| if (WARN_ON(endpoint.base.port == 0) || index >= FIMC_MAX_SENSORS) { | |
| of_node_put(ep); | |
| return -EINVAL; | |
| } | |
| pd->mux_id = (endpoint.base.port - 1) & 0x1; | |
| rem = of_graph_get_remote_port_parent(ep); | |
| if (rem == NULL) { | |
| v4l2_info(&fmd->v4l2_dev, "Remote device at %pOF not found\n", | |
| ep); | |
| of_node_put(ep); | |
| return 0; | |
| } | |
| if (fimc_input_is_parallel(endpoint.base.port)) { | |
| if (endpoint.bus_type == V4L2_MBUS_PARALLEL) | |
| pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_601; | |
| else | |
| pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_656; | |
| pd->flags = endpoint.bus.parallel.flags; | |
| } else if (fimc_input_is_mipi_csi(endpoint.base.port)) { | |
| /* | |
| * MIPI CSI-2: only input mux selection and | |
| * the sensor's clock frequency is needed. | |
| */ | |
| pd->sensor_bus_type = FIMC_BUS_TYPE_MIPI_CSI2; | |
| } else { | |
| v4l2_err(&fmd->v4l2_dev, "Wrong port id (%u) at node %pOF\n", | |
| endpoint.base.port, rem); | |
| } | |
| /* | |
| * For FIMC-IS handled sensors, that are placed under i2c-isp device | |
| * node, FIMC is connected to the FIMC-IS through its ISP Writeback | |
| * input. Sensors are attached to the FIMC-LITE hostdata interface | |
| * directly or through MIPI-CSIS, depending on the external media bus | |
| * used. This needs to be handled in a more reliable way, not by just | |
| * checking parent's node name. | |
| */ | |
| np = of_get_parent(rem); | |
| of_node_put(rem); | |
| if (of_node_name_eq(np, "i2c-isp")) | |
| pd->fimc_bus_type = FIMC_BUS_TYPE_ISP_WRITEBACK; | |
| else | |
| pd->fimc_bus_type = pd->sensor_bus_type; | |
| of_node_put(np); | |
| if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor))) { | |
| of_node_put(ep); | |
| return -EINVAL; | |
| } | |
| asd = v4l2_async_notifier_add_fwnode_remote_subdev( | |
| &fmd->subdev_notifier, of_fwnode_handle(ep), | |
| struct v4l2_async_subdev); | |
| of_node_put(ep); | |
| if (IS_ERR(asd)) | |
| return PTR_ERR(asd); | |
| fmd->sensor[index].asd = asd; | |
| fmd->num_sensors++; | |
| return 0; | |
| } | |
| /* Parse port node and register as a sub-device any sensor specified there. */ | |
| static int fimc_md_parse_port_node(struct fimc_md *fmd, | |
| struct device_node *port) | |
| { | |
| struct device_node *ep; | |
| int ret; | |
| for_each_child_of_node(port, ep) { | |
| ret = fimc_md_parse_one_endpoint(fmd, ep); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /* Register all SoC external sub-devices */ | |
| static int fimc_md_register_sensor_entities(struct fimc_md *fmd) | |
| { | |
| struct device_node *parent = fmd->pdev->dev.of_node; | |
| struct device_node *ports = NULL; | |
| struct device_node *node; | |
| int ret; | |
| /* | |
| * Runtime resume one of the FIMC entities to make sure | |
| * the sclk_cam clocks are not globally disabled. | |
| */ | |
| if (!fmd->pmf) | |
| return -ENXIO; | |
| ret = pm_runtime_get_sync(fmd->pmf); | |
| if (ret < 0) { | |
| pm_runtime_put(fmd->pmf); | |
| return ret; | |
| } | |
| fmd->num_sensors = 0; | |
| /* Attach sensors linked to MIPI CSI-2 receivers */ | |
| for_each_available_child_of_node(parent, node) { | |
| struct device_node *port; | |
| if (!of_node_name_eq(node, "csis")) | |
| continue; | |
| /* The csis node can have only port subnode. */ | |
| port = of_get_next_child(node, NULL); | |
| if (!port) | |
| continue; | |
| ret = fimc_md_parse_port_node(fmd, port); | |
| of_node_put(port); | |
| if (ret < 0) { | |
| of_node_put(node); | |
| goto cleanup; | |
| } | |
| } | |
| /* Attach sensors listed in the parallel-ports node */ | |
| ports = of_get_child_by_name(parent, "parallel-ports"); | |
| if (!ports) | |
| goto rpm_put; | |
| for_each_child_of_node(ports, node) { | |
| ret = fimc_md_parse_port_node(fmd, node); | |
| if (ret < 0) { | |
| of_node_put(node); | |
| goto cleanup; | |
| } | |
| } | |
| of_node_put(ports); | |
| rpm_put: | |
| pm_runtime_put(fmd->pmf); | |
| return 0; | |
| cleanup: | |
| of_node_put(ports); | |
| v4l2_async_notifier_cleanup(&fmd->subdev_notifier); | |
| pm_runtime_put(fmd->pmf); | |
| return ret; | |
| } | |
| static int __of_get_csis_id(struct device_node *np) | |
| { | |
| u32 reg = 0; | |
| np = of_get_child_by_name(np, "port"); | |
| if (!np) | |
| return -EINVAL; | |
| of_property_read_u32(np, "reg", ®); | |
| of_node_put(np); | |
| return reg - FIMC_INPUT_MIPI_CSI2_0; | |
| } | |
| /* | |
| * MIPI-CSIS, FIMC and FIMC-LITE platform devices registration. | |
| */ | |
| static int register_fimc_lite_entity(struct fimc_md *fmd, | |
| struct fimc_lite *fimc_lite) | |
| { | |
| struct v4l2_subdev *sd; | |
| struct exynos_media_pipeline *ep; | |
| int ret; | |
| if (WARN_ON(fimc_lite->index >= FIMC_LITE_MAX_DEVS || | |
| fmd->fimc_lite[fimc_lite->index])) | |
| return -EBUSY; | |
| sd = &fimc_lite->subdev; | |
| sd->grp_id = GRP_ID_FLITE; | |
| ep = fimc_md_pipeline_create(fmd); | |
| if (!ep) | |
| return -ENOMEM; | |
| v4l2_set_subdev_hostdata(sd, ep); | |
| ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); | |
| if (!ret) | |
| fmd->fimc_lite[fimc_lite->index] = fimc_lite; | |
| else | |
| v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.LITE%d\n", | |
| fimc_lite->index); | |
| return ret; | |
| } | |
| static int register_fimc_entity(struct fimc_md *fmd, struct fimc_dev *fimc) | |
| { | |
| struct v4l2_subdev *sd; | |
| struct exynos_media_pipeline *ep; | |
| int ret; | |
| if (WARN_ON(fimc->id >= FIMC_MAX_DEVS || fmd->fimc[fimc->id])) | |
| return -EBUSY; | |
| sd = &fimc->vid_cap.subdev; | |
| sd->grp_id = GRP_ID_FIMC; | |
| ep = fimc_md_pipeline_create(fmd); | |
| if (!ep) | |
| return -ENOMEM; | |
| v4l2_set_subdev_hostdata(sd, ep); | |
| ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); | |
| if (!ret) { | |
| if (!fmd->pmf && fimc->pdev) | |
| fmd->pmf = &fimc->pdev->dev; | |
| fmd->fimc[fimc->id] = fimc; | |
| fimc->vid_cap.user_subdev_api = fmd->user_subdev_api; | |
| } else { | |
| v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.%d (%d)\n", | |
| fimc->id, ret); | |
| } | |
| return ret; | |
| } | |
| static int register_csis_entity(struct fimc_md *fmd, | |
| struct platform_device *pdev, | |
| struct v4l2_subdev *sd) | |
| { | |
| struct device_node *node = pdev->dev.of_node; | |
| int id, ret; | |
| id = node ? __of_get_csis_id(node) : max(0, pdev->id); | |
| if (WARN_ON(id < 0 || id >= CSIS_MAX_ENTITIES)) | |
| return -ENOENT; | |
| if (WARN_ON(fmd->csis[id].sd)) | |
| return -EBUSY; | |
| sd->grp_id = GRP_ID_CSIS; | |
| ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); | |
| if (!ret) | |
| fmd->csis[id].sd = sd; | |
| else | |
| v4l2_err(&fmd->v4l2_dev, | |
| "Failed to register MIPI-CSIS.%d (%d)\n", id, ret); | |
| return ret; | |
| } | |
| static int register_fimc_is_entity(struct fimc_md *fmd, struct fimc_is *is) | |
| { | |
| struct v4l2_subdev *sd = &is->isp.subdev; | |
| struct exynos_media_pipeline *ep; | |
| int ret; | |
| /* Allocate pipeline object for the ISP capture video node. */ | |
| ep = fimc_md_pipeline_create(fmd); | |
| if (!ep) | |
| return -ENOMEM; | |
| v4l2_set_subdev_hostdata(sd, ep); | |
| ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); | |
| if (ret) { | |
| v4l2_err(&fmd->v4l2_dev, | |
| "Failed to register FIMC-ISP (%d)\n", ret); | |
| return ret; | |
| } | |
| fmd->fimc_is = is; | |
| return 0; | |
| } | |
| static int fimc_md_register_platform_entity(struct fimc_md *fmd, | |
| struct platform_device *pdev, | |
| int plat_entity) | |
| { | |
| struct device *dev = &pdev->dev; | |
| int ret = -EPROBE_DEFER; | |
| void *drvdata; | |
| /* Lock to ensure dev->driver won't change. */ | |
| device_lock(dev); | |
| if (!dev->driver || !try_module_get(dev->driver->owner)) | |
| goto dev_unlock; | |
| drvdata = dev_get_drvdata(dev); | |
| /* Some subdev didn't probe successfully id drvdata is NULL */ | |
| if (drvdata) { | |
| switch (plat_entity) { | |
| case IDX_FIMC: | |
| ret = register_fimc_entity(fmd, drvdata); | |
| break; | |
| case IDX_FLITE: | |
| ret = register_fimc_lite_entity(fmd, drvdata); | |
| break; | |
| case IDX_CSIS: | |
| ret = register_csis_entity(fmd, pdev, drvdata); | |
| break; | |
| case IDX_IS_ISP: | |
| ret = register_fimc_is_entity(fmd, drvdata); | |
| break; | |
| default: | |
| ret = -ENODEV; | |
| } | |
| } | |
| module_put(dev->driver->owner); | |
| dev_unlock: | |
| device_unlock(dev); | |
| if (ret == -EPROBE_DEFER) | |
| dev_info(&fmd->pdev->dev, "deferring %s device registration\n", | |
| dev_name(dev)); | |
| else if (ret < 0) | |
| dev_err(&fmd->pdev->dev, "%s device registration failed (%d)\n", | |
| dev_name(dev), ret); | |
| return ret; | |
| } | |
| /* Register FIMC, FIMC-LITE and CSIS media entities */ | |
| static int fimc_md_register_platform_entities(struct fimc_md *fmd, | |
| struct device_node *parent) | |
| { | |
| struct device_node *node; | |
| int ret = 0; | |
| for_each_available_child_of_node(parent, node) { | |
| struct platform_device *pdev; | |
| int plat_entity = -1; | |
| pdev = of_find_device_by_node(node); | |
| if (!pdev) | |
| continue; | |
| /* If driver of any entity isn't ready try all again later. */ | |
| if (of_node_name_eq(node, CSIS_OF_NODE_NAME)) | |
| plat_entity = IDX_CSIS; | |
| else if (of_node_name_eq(node, FIMC_IS_OF_NODE_NAME)) | |
| plat_entity = IDX_IS_ISP; | |
| else if (of_node_name_eq(node, FIMC_LITE_OF_NODE_NAME)) | |
| plat_entity = IDX_FLITE; | |
| else if (of_node_name_eq(node, FIMC_OF_NODE_NAME) && | |
| !of_property_read_bool(node, "samsung,lcd-wb")) | |
| plat_entity = IDX_FIMC; | |
| if (plat_entity >= 0) | |
| ret = fimc_md_register_platform_entity(fmd, pdev, | |
| plat_entity); | |
| put_device(&pdev->dev); | |
| if (ret < 0) { | |
| of_node_put(node); | |
| break; | |
| } | |
| } | |
| return ret; | |
| } | |
| static void fimc_md_unregister_entities(struct fimc_md *fmd) | |
| { | |
| int i; | |
| for (i = 0; i < FIMC_MAX_DEVS; i++) { | |
| struct fimc_dev *dev = fmd->fimc[i]; | |
| if (dev == NULL) | |
| continue; | |
| v4l2_device_unregister_subdev(&dev->vid_cap.subdev); | |
| dev->vid_cap.ve.pipe = NULL; | |
| fmd->fimc[i] = NULL; | |
| } | |
| for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { | |
| struct fimc_lite *dev = fmd->fimc_lite[i]; | |
| if (dev == NULL) | |
| continue; | |
| v4l2_device_unregister_subdev(&dev->subdev); | |
| dev->ve.pipe = NULL; | |
| fmd->fimc_lite[i] = NULL; | |
| } | |
| for (i = 0; i < CSIS_MAX_ENTITIES; i++) { | |
| if (fmd->csis[i].sd == NULL) | |
| continue; | |
| v4l2_device_unregister_subdev(fmd->csis[i].sd); | |
| fmd->csis[i].sd = NULL; | |
| } | |
| if (fmd->fimc_is) | |
| v4l2_device_unregister_subdev(&fmd->fimc_is->isp.subdev); | |
| v4l2_info(&fmd->v4l2_dev, "Unregistered all entities\n"); | |
| } | |
| /** | |
| * __fimc_md_create_fimc_links - create links to all FIMC entities | |
| * @fmd: fimc media device | |
| * @source: the source entity to create links to all fimc entities from | |
| * @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null | |
| * @pad: the source entity pad index | |
| * @link_mask: bitmask of the fimc devices for which link should be enabled | |
| */ | |
| static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, | |
| struct media_entity *source, | |
| struct v4l2_subdev *sensor, | |
| int pad, int link_mask) | |
| { | |
| struct fimc_source_info *si = NULL; | |
| struct media_entity *sink; | |
| unsigned int flags = 0; | |
| int i, ret = 0; | |
| if (sensor) { | |
| si = v4l2_get_subdev_hostdata(sensor); | |
| /* Skip direct FIMC links in the logical FIMC-IS sensor path */ | |
| if (si && si->fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) | |
| ret = 1; | |
| } | |
| for (i = 0; !ret && i < FIMC_MAX_DEVS; i++) { | |
| if (!fmd->fimc[i]) | |
| continue; | |
| /* | |
| * Some FIMC variants are not fitted with camera capture | |
| * interface. Skip creating a link from sensor for those. | |
| */ | |
| if (!fmd->fimc[i]->variant->has_cam_if) | |
| continue; | |
| flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0; | |
| sink = &fmd->fimc[i]->vid_cap.subdev.entity; | |
| ret = media_create_pad_link(source, pad, sink, | |
| FIMC_SD_PAD_SINK_CAM, flags); | |
| if (ret) | |
| return ret; | |
| /* Notify FIMC capture subdev entity */ | |
| ret = media_entity_call(sink, link_setup, &sink->pads[0], | |
| &source->pads[pad], flags); | |
| if (ret) | |
| break; | |
| v4l2_info(&fmd->v4l2_dev, "created link [%s] %c> [%s]\n", | |
| source->name, flags ? '=' : '-', sink->name); | |
| } | |
| for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { | |
| if (!fmd->fimc_lite[i]) | |
| continue; | |
| sink = &fmd->fimc_lite[i]->subdev.entity; | |
| ret = media_create_pad_link(source, pad, sink, | |
| FLITE_SD_PAD_SINK, 0); | |
| if (ret) | |
| return ret; | |
| /* Notify FIMC-LITE subdev entity */ | |
| ret = media_entity_call(sink, link_setup, &sink->pads[0], | |
| &source->pads[pad], 0); | |
| if (ret) | |
| break; | |
| v4l2_info(&fmd->v4l2_dev, "created link [%s] -> [%s]\n", | |
| source->name, sink->name); | |
| } | |
| return 0; | |
| } | |
| /* Create links from FIMC-LITE source pads to other entities */ | |
| static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) | |
| { | |
| struct media_entity *source, *sink; | |
| int i, ret = 0; | |
| for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { | |
| struct fimc_lite *fimc = fmd->fimc_lite[i]; | |
| if (fimc == NULL) | |
| continue; | |
| source = &fimc->subdev.entity; | |
| sink = &fimc->ve.vdev.entity; | |
| /* FIMC-LITE's subdev and video node */ | |
| ret = media_create_pad_link(source, FLITE_SD_PAD_SOURCE_DMA, | |
| sink, 0, 0); | |
| if (ret) | |
| break; | |
| /* Link from FIMC-LITE to IS-ISP subdev */ | |
| sink = &fmd->fimc_is->isp.subdev.entity; | |
| ret = media_create_pad_link(source, FLITE_SD_PAD_SOURCE_ISP, | |
| sink, 0, 0); | |
| if (ret) | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* Create FIMC-IS links */ | |
| static int __fimc_md_create_fimc_is_links(struct fimc_md *fmd) | |
| { | |
| struct fimc_isp *isp = &fmd->fimc_is->isp; | |
| struct media_entity *source, *sink; | |
| int i, ret; | |
| source = &isp->subdev.entity; | |
| for (i = 0; i < FIMC_MAX_DEVS; i++) { | |
| if (fmd->fimc[i] == NULL) | |
| continue; | |
| /* Link from FIMC-IS-ISP subdev to FIMC */ | |
| sink = &fmd->fimc[i]->vid_cap.subdev.entity; | |
| ret = media_create_pad_link(source, FIMC_ISP_SD_PAD_SRC_FIFO, | |
| sink, FIMC_SD_PAD_SINK_FIFO, 0); | |
| if (ret) | |
| return ret; | |
| } | |
| /* Link from FIMC-IS-ISP subdev to fimc-is-isp.capture video node */ | |
| sink = &isp->video_capture.ve.vdev.entity; | |
| /* Skip this link if the fimc-is-isp video node driver isn't built-in */ | |
| if (sink->num_pads == 0) | |
| return 0; | |
| return media_create_pad_link(source, FIMC_ISP_SD_PAD_SRC_DMA, | |
| sink, 0, 0); | |
| } | |
| /** | |
| * fimc_md_create_links - create default links between registered entities | |
| * @fmd: fimc media device | |
| * | |
| * Parallel interface sensor entities are connected directly to FIMC capture | |
| * entities. The sensors using MIPI CSIS bus are connected through immutable | |
| * link with CSI receiver entity specified by mux_id. Any registered CSIS | |
| * entity has a link to each registered FIMC capture entity. Enabled links | |
| * are created by default between each subsequent registered sensor and | |
| * subsequent FIMC capture entity. The number of default active links is | |
| * determined by the number of available sensors or FIMC entities, | |
| * whichever is less. | |
| */ | |
| static int fimc_md_create_links(struct fimc_md *fmd) | |
| { | |
| struct v4l2_subdev *csi_sensors[CSIS_MAX_ENTITIES] = { NULL }; | |
| struct v4l2_subdev *sensor, *csis; | |
| struct fimc_source_info *pdata; | |
| struct media_entity *source, *sink; | |
| int i, pad, fimc_id = 0, ret = 0; | |
| u32 flags, link_mask = 0; | |
| for (i = 0; i < fmd->num_sensors; i++) { | |
| if (fmd->sensor[i].subdev == NULL) | |
| continue; | |
| sensor = fmd->sensor[i].subdev; | |
| pdata = v4l2_get_subdev_hostdata(sensor); | |
| if (!pdata) | |
| continue; | |
| source = NULL; | |
| switch (pdata->sensor_bus_type) { | |
| case FIMC_BUS_TYPE_MIPI_CSI2: | |
| if (WARN(pdata->mux_id >= CSIS_MAX_ENTITIES, | |
| "Wrong CSI channel id: %d\n", pdata->mux_id)) | |
| return -EINVAL; | |
| csis = fmd->csis[pdata->mux_id].sd; | |
| if (WARN(csis == NULL, | |
| "MIPI-CSI interface specified but s5p-csis module is not loaded!\n")) | |
| return -EINVAL; | |
| pad = sensor->entity.num_pads - 1; | |
| ret = media_create_pad_link(&sensor->entity, pad, | |
| &csis->entity, CSIS_PAD_SINK, | |
| MEDIA_LNK_FL_IMMUTABLE | | |
| MEDIA_LNK_FL_ENABLED); | |
| if (ret) | |
| return ret; | |
| v4l2_info(&fmd->v4l2_dev, "created link [%s] => [%s]\n", | |
| sensor->entity.name, csis->entity.name); | |
| source = NULL; | |
| csi_sensors[pdata->mux_id] = sensor; | |
| break; | |
| case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656: | |
| source = &sensor->entity; | |
| pad = 0; | |
| break; | |
| default: | |
| v4l2_err(&fmd->v4l2_dev, "Wrong bus_type: %x\n", | |
| pdata->sensor_bus_type); | |
| return -EINVAL; | |
| } | |
| if (source == NULL) | |
| continue; | |
| link_mask = 1 << fimc_id++; | |
| ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor, | |
| pad, link_mask); | |
| } | |
| for (i = 0; i < CSIS_MAX_ENTITIES; i++) { | |
| if (fmd->csis[i].sd == NULL) | |
| continue; | |
| source = &fmd->csis[i].sd->entity; | |
| pad = CSIS_PAD_SOURCE; | |
| sensor = csi_sensors[i]; | |
| link_mask = 1 << fimc_id++; | |
| ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor, | |
| pad, link_mask); | |
| } | |
| /* Create immutable links between each FIMC's subdev and video node */ | |
| flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED; | |
| for (i = 0; i < FIMC_MAX_DEVS; i++) { | |
| if (!fmd->fimc[i]) | |
| continue; | |
| source = &fmd->fimc[i]->vid_cap.subdev.entity; | |
| sink = &fmd->fimc[i]->vid_cap.ve.vdev.entity; | |
| ret = media_create_pad_link(source, FIMC_SD_PAD_SOURCE, | |
| sink, 0, flags); | |
| if (ret) | |
| break; | |
| } | |
| ret = __fimc_md_create_flite_source_links(fmd); | |
| if (ret < 0) | |
| return ret; | |
| if (fmd->use_isp) | |
| ret = __fimc_md_create_fimc_is_links(fmd); | |
| return ret; | |
| } | |
| /* | |
| * The peripheral sensor and CAM_BLK (PIXELASYNCMx) clocks management. | |
| */ | |
| static void fimc_md_put_clocks(struct fimc_md *fmd) | |
| { | |
| int i = FIMC_MAX_CAMCLKS; | |
| while (--i >= 0) { | |
| if (IS_ERR(fmd->camclk[i].clock)) | |
| continue; | |
| clk_put(fmd->camclk[i].clock); | |
| fmd->camclk[i].clock = ERR_PTR(-EINVAL); | |
| } | |
| /* Writeback (PIXELASYNCMx) clocks */ | |
| for (i = 0; i < FIMC_MAX_WBCLKS; i++) { | |
| if (IS_ERR(fmd->wbclk[i])) | |
| continue; | |
| clk_put(fmd->wbclk[i]); | |
| fmd->wbclk[i] = ERR_PTR(-EINVAL); | |
| } | |
| } | |
| static int fimc_md_get_clocks(struct fimc_md *fmd) | |
| { | |
| struct device *dev = &fmd->pdev->dev; | |
| char clk_name[32]; | |
| struct clk *clock; | |
| int i, ret = 0; | |
| for (i = 0; i < FIMC_MAX_CAMCLKS; i++) | |
| fmd->camclk[i].clock = ERR_PTR(-EINVAL); | |
| for (i = 0; i < FIMC_MAX_CAMCLKS; i++) { | |
| snprintf(clk_name, sizeof(clk_name), "sclk_cam%u", i); | |
| clock = clk_get(dev, clk_name); | |
| if (IS_ERR(clock)) { | |
| dev_err(dev, "Failed to get clock: %s\n", clk_name); | |
| ret = PTR_ERR(clock); | |
| break; | |
| } | |
| fmd->camclk[i].clock = clock; | |
| } | |
| if (ret) | |
| fimc_md_put_clocks(fmd); | |
| if (!fmd->use_isp) | |
| return 0; | |
| /* | |
| * For now get only PIXELASYNCM1 clock (Writeback B/ISP), | |
| * leave PIXELASYNCM0 out for the LCD Writeback driver. | |
| */ | |
| fmd->wbclk[CLK_IDX_WB_A] = ERR_PTR(-EINVAL); | |
| for (i = CLK_IDX_WB_B; i < FIMC_MAX_WBCLKS; i++) { | |
| snprintf(clk_name, sizeof(clk_name), "pxl_async%u", i); | |
| clock = clk_get(dev, clk_name); | |
| if (IS_ERR(clock)) { | |
| v4l2_err(&fmd->v4l2_dev, "Failed to get clock: %s\n", | |
| clk_name); | |
| ret = PTR_ERR(clock); | |
| break; | |
| } | |
| fmd->wbclk[i] = clock; | |
| } | |
| if (ret) | |
| fimc_md_put_clocks(fmd); | |
| return ret; | |
| } | |
| static int __fimc_md_modify_pipeline(struct media_entity *entity, bool enable) | |
| { | |
| struct exynos_video_entity *ve; | |
| struct fimc_pipeline *p; | |
| struct video_device *vdev; | |
| int ret; | |
| vdev = media_entity_to_video_device(entity); | |
| if (vdev->entity.use_count == 0) | |
| return 0; | |
| ve = vdev_to_exynos_video_entity(vdev); | |
| p = to_fimc_pipeline(ve->pipe); | |
| /* | |
| * Nothing to do if we are disabling the pipeline, some link | |
| * has been disconnected and p->subdevs array is cleared now. | |
| */ | |
| if (!enable && p->subdevs[IDX_SENSOR] == NULL) | |
| return 0; | |
| if (enable) | |
| ret = __fimc_pipeline_open(ve->pipe, entity, true); | |
| else | |
| ret = __fimc_pipeline_close(ve->pipe); | |
| if (ret == 0 && !enable) | |
| memset(p->subdevs, 0, sizeof(p->subdevs)); | |
| return ret; | |
| } | |
| /* Locking: called with entity->graph_obj.mdev->graph_mutex mutex held. */ | |
| static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable, | |
| struct media_graph *graph) | |
| { | |
| struct media_entity *entity_err = entity; | |
| int ret; | |
| /* | |
| * Walk current graph and call the pipeline open/close routine for each | |
| * opened video node that belongs to the graph of entities connected | |
| * through active links. This is needed as we cannot power on/off the | |
| * subdevs in random order. | |
| */ | |
| media_graph_walk_start(graph, entity); | |
| while ((entity = media_graph_walk_next(graph))) { | |
| if (!is_media_entity_v4l2_video_device(entity)) | |
| continue; | |
| ret = __fimc_md_modify_pipeline(entity, enable); | |
| if (ret < 0) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| media_graph_walk_start(graph, entity_err); | |
| while ((entity_err = media_graph_walk_next(graph))) { | |
| if (!is_media_entity_v4l2_video_device(entity_err)) | |
| continue; | |
| __fimc_md_modify_pipeline(entity_err, !enable); | |
| if (entity_err == entity) | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int fimc_md_link_notify(struct media_link *link, unsigned int flags, | |
| unsigned int notification) | |
| { | |
| struct media_graph *graph = | |
| &container_of(link->graph_obj.mdev, struct fimc_md, | |
| media_dev)->link_setup_graph; | |
| struct media_entity *sink = link->sink->entity; | |
| int ret = 0; | |
| /* Before link disconnection */ | |
| if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH) { | |
| ret = media_graph_walk_init(graph, | |
| link->graph_obj.mdev); | |
| if (ret) | |
| return ret; | |
| if (!(flags & MEDIA_LNK_FL_ENABLED)) | |
| ret = __fimc_md_modify_pipelines(sink, false, graph); | |
| #if 0 | |
| else | |
| /* TODO: Link state change validation */ | |
| #endif | |
| /* After link activation */ | |
| } else if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH) { | |
| if (link->flags & MEDIA_LNK_FL_ENABLED) | |
| ret = __fimc_md_modify_pipelines(sink, true, graph); | |
| media_graph_walk_cleanup(graph); | |
| } | |
| return ret ? -EPIPE : 0; | |
| } | |
| static const struct media_device_ops fimc_md_ops = { | |
| .link_notify = fimc_md_link_notify, | |
| }; | |
| static ssize_t fimc_md_sysfs_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct fimc_md *fmd = dev_get_drvdata(dev); | |
| if (fmd->user_subdev_api) | |
| return strscpy(buf, "Sub-device API (sub-dev)\n", PAGE_SIZE); | |
| return strscpy(buf, "V4L2 video node only API (vid-dev)\n", PAGE_SIZE); | |
| } | |
| static ssize_t fimc_md_sysfs_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct fimc_md *fmd = dev_get_drvdata(dev); | |
| bool subdev_api; | |
| int i; | |
| if (!strcmp(buf, "vid-dev\n")) | |
| subdev_api = false; | |
| else if (!strcmp(buf, "sub-dev\n")) | |
| subdev_api = true; | |
| else | |
| return count; | |
| fmd->user_subdev_api = subdev_api; | |
| for (i = 0; i < FIMC_MAX_DEVS; i++) | |
| if (fmd->fimc[i]) | |
| fmd->fimc[i]->vid_cap.user_subdev_api = subdev_api; | |
| return count; | |
| } | |
| /* | |
| * This device attribute is to select video pipeline configuration method. | |
| * There are following valid values: | |
| * vid-dev - for V4L2 video node API only, subdevice will be configured | |
| * by the host driver. | |
| * sub-dev - for media controller API, subdevs must be configured in user | |
| * space before starting streaming. | |
| */ | |
| static DEVICE_ATTR(subdev_conf_mode, S_IWUSR | S_IRUGO, | |
| fimc_md_sysfs_show, fimc_md_sysfs_store); | |
| static int cam_clk_prepare(struct clk_hw *hw) | |
| { | |
| struct cam_clk *camclk = to_cam_clk(hw); | |
| int ret; | |
| if (camclk->fmd->pmf == NULL) | |
| return -ENODEV; | |
| ret = pm_runtime_get_sync(camclk->fmd->pmf); | |
| return ret < 0 ? ret : 0; | |
| } | |
| static void cam_clk_unprepare(struct clk_hw *hw) | |
| { | |
| struct cam_clk *camclk = to_cam_clk(hw); | |
| if (camclk->fmd->pmf == NULL) | |
| return; | |
| pm_runtime_put_sync(camclk->fmd->pmf); | |
| } | |
| static const struct clk_ops cam_clk_ops = { | |
| .prepare = cam_clk_prepare, | |
| .unprepare = cam_clk_unprepare, | |
| }; | |
| static void fimc_md_unregister_clk_provider(struct fimc_md *fmd) | |
| { | |
| struct cam_clk_provider *cp = &fmd->clk_provider; | |
| unsigned int i; | |
| if (cp->of_node) | |
| of_clk_del_provider(cp->of_node); | |
| for (i = 0; i < cp->num_clocks; i++) | |
| clk_unregister(cp->clks[i]); | |
| } | |
| static int fimc_md_register_clk_provider(struct fimc_md *fmd) | |
| { | |
| struct cam_clk_provider *cp = &fmd->clk_provider; | |
| struct device *dev = &fmd->pdev->dev; | |
| int i, ret; | |
| for (i = 0; i < FIMC_MAX_CAMCLKS; i++) { | |
| struct cam_clk *camclk = &cp->camclk[i]; | |
| struct clk_init_data init; | |
| const char *p_name; | |
| ret = of_property_read_string_index(dev->of_node, | |
| "clock-output-names", i, &init.name); | |
| if (ret < 0) | |
| break; | |
| p_name = __clk_get_name(fmd->camclk[i].clock); | |
| /* It's safe since clk_register() will duplicate the string. */ | |
| init.parent_names = &p_name; | |
| init.num_parents = 1; | |
| init.ops = &cam_clk_ops; | |
| init.flags = CLK_SET_RATE_PARENT; | |
| camclk->hw.init = &init; | |
| camclk->fmd = fmd; | |
| cp->clks[i] = clk_register(NULL, &camclk->hw); | |
| if (IS_ERR(cp->clks[i])) { | |
| dev_err(dev, "failed to register clock: %s (%ld)\n", | |
| init.name, PTR_ERR(cp->clks[i])); | |
| ret = PTR_ERR(cp->clks[i]); | |
| goto err; | |
| } | |
| cp->num_clocks++; | |
| } | |
| if (cp->num_clocks == 0) { | |
| dev_warn(dev, "clk provider not registered\n"); | |
| return 0; | |
| } | |
| cp->clk_data.clks = cp->clks; | |
| cp->clk_data.clk_num = cp->num_clocks; | |
| cp->of_node = dev->of_node; | |
| ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, | |
| &cp->clk_data); | |
| if (ret == 0) | |
| return 0; | |
| err: | |
| fimc_md_unregister_clk_provider(fmd); | |
| return ret; | |
| } | |
| static int subdev_notifier_bound(struct v4l2_async_notifier *notifier, | |
| struct v4l2_subdev *subdev, | |
| struct v4l2_async_subdev *asd) | |
| { | |
| struct fimc_md *fmd = notifier_to_fimc_md(notifier); | |
| struct fimc_sensor_info *si = NULL; | |
| int i; | |
| /* Find platform data for this sensor subdev */ | |
| for (i = 0; i < ARRAY_SIZE(fmd->sensor); i++) | |
| if (fmd->sensor[i].asd && | |
| fmd->sensor[i].asd->match.fwnode == | |
| of_fwnode_handle(subdev->dev->of_node)) | |
| si = &fmd->sensor[i]; | |
| if (si == NULL) | |
| return -EINVAL; | |
| v4l2_set_subdev_hostdata(subdev, &si->pdata); | |
| if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) | |
| subdev->grp_id = GRP_ID_FIMC_IS_SENSOR; | |
| else | |
| subdev->grp_id = GRP_ID_SENSOR; | |
| si->subdev = subdev; | |
| v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n", | |
| subdev->name, fmd->num_sensors); | |
| fmd->num_sensors++; | |
| return 0; | |
| } | |
| static int subdev_notifier_complete(struct v4l2_async_notifier *notifier) | |
| { | |
| struct fimc_md *fmd = notifier_to_fimc_md(notifier); | |
| int ret; | |
| mutex_lock(&fmd->media_dev.graph_mutex); | |
| ret = fimc_md_create_links(fmd); | |
| if (ret < 0) | |
| goto unlock; | |
| ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev); | |
| unlock: | |
| mutex_unlock(&fmd->media_dev.graph_mutex); | |
| if (ret < 0) | |
| return ret; | |
| return media_device_register(&fmd->media_dev); | |
| } | |
| static const struct v4l2_async_notifier_operations subdev_notifier_ops = { | |
| .bound = subdev_notifier_bound, | |
| .complete = subdev_notifier_complete, | |
| }; | |
| static int fimc_md_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct v4l2_device *v4l2_dev; | |
| struct pinctrl *pinctrl; | |
| struct fimc_md *fmd; | |
| int ret; | |
| fmd = devm_kzalloc(dev, sizeof(*fmd), GFP_KERNEL); | |
| if (!fmd) | |
| return -ENOMEM; | |
| spin_lock_init(&fmd->slock); | |
| INIT_LIST_HEAD(&fmd->pipelines); | |
| fmd->pdev = pdev; | |
| strscpy(fmd->media_dev.model, "Samsung S5P FIMC", | |
| sizeof(fmd->media_dev.model)); | |
| fmd->media_dev.ops = &fimc_md_ops; | |
| fmd->media_dev.dev = dev; | |
| v4l2_dev = &fmd->v4l2_dev; | |
| v4l2_dev->mdev = &fmd->media_dev; | |
| v4l2_dev->notify = fimc_sensor_notify; | |
| strscpy(v4l2_dev->name, "s5p-fimc-md", sizeof(v4l2_dev->name)); | |
| fmd->use_isp = fimc_md_is_isp_available(dev->of_node); | |
| fmd->user_subdev_api = true; | |
| media_device_init(&fmd->media_dev); | |
| ret = v4l2_device_register(dev, &fmd->v4l2_dev); | |
| if (ret < 0) { | |
| v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret); | |
| goto err_md; | |
| } | |
| ret = fimc_md_get_clocks(fmd); | |
| if (ret) | |
| goto err_v4l2dev; | |
| pinctrl = devm_pinctrl_get(dev); | |
| if (IS_ERR(pinctrl)) { | |
| ret = PTR_ERR(pinctrl); | |
| if (ret != EPROBE_DEFER) | |
| dev_err(dev, "Failed to get pinctrl: %d\n", ret); | |
| goto err_clk; | |
| } | |
| platform_set_drvdata(pdev, fmd); | |
| v4l2_async_notifier_init(&fmd->subdev_notifier); | |
| ret = fimc_md_register_platform_entities(fmd, dev->of_node); | |
| if (ret) | |
| goto err_clk; | |
| ret = fimc_md_register_sensor_entities(fmd); | |
| if (ret) | |
| goto err_m_ent; | |
| ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode); | |
| if (ret) | |
| goto err_cleanup; | |
| /* | |
| * FIMC platform devices need to be registered before the sclk_cam | |
| * clocks provider, as one of these devices needs to be activated | |
| * to enable the clock. | |
| */ | |
| ret = fimc_md_register_clk_provider(fmd); | |
| if (ret < 0) { | |
| v4l2_err(v4l2_dev, "clock provider registration failed\n"); | |
| goto err_attr; | |
| } | |
| if (fmd->num_sensors > 0) { | |
| fmd->subdev_notifier.ops = &subdev_notifier_ops; | |
| fmd->num_sensors = 0; | |
| ret = v4l2_async_notifier_register(&fmd->v4l2_dev, | |
| &fmd->subdev_notifier); | |
| if (ret) | |
| goto err_clk_p; | |
| } | |
| return 0; | |
| err_clk_p: | |
| fimc_md_unregister_clk_provider(fmd); | |
| err_attr: | |
| device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode); | |
| err_cleanup: | |
| v4l2_async_notifier_cleanup(&fmd->subdev_notifier); | |
| err_m_ent: | |
| fimc_md_unregister_entities(fmd); | |
| err_clk: | |
| fimc_md_put_clocks(fmd); | |
| err_v4l2dev: | |
| v4l2_device_unregister(&fmd->v4l2_dev); | |
| err_md: | |
| media_device_cleanup(&fmd->media_dev); | |
| return ret; | |
| } | |
| static int fimc_md_remove(struct platform_device *pdev) | |
| { | |
| struct fimc_md *fmd = platform_get_drvdata(pdev); | |
| if (!fmd) | |
| return 0; | |
| fimc_md_unregister_clk_provider(fmd); | |
| v4l2_async_notifier_unregister(&fmd->subdev_notifier); | |
| v4l2_async_notifier_cleanup(&fmd->subdev_notifier); | |
| v4l2_device_unregister(&fmd->v4l2_dev); | |
| device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode); | |
| fimc_md_unregister_entities(fmd); | |
| fimc_md_pipelines_free(fmd); | |
| media_device_unregister(&fmd->media_dev); | |
| media_device_cleanup(&fmd->media_dev); | |
| fimc_md_put_clocks(fmd); | |
| return 0; | |
| } | |
| static const struct platform_device_id fimc_driver_ids[] __always_unused = { | |
| { .name = "s5p-fimc-md" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, fimc_driver_ids); | |
| static const struct of_device_id fimc_md_of_match[] = { | |
| { .compatible = "samsung,fimc" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, fimc_md_of_match); | |
| static struct platform_driver fimc_md_driver = { | |
| .probe = fimc_md_probe, | |
| .remove = fimc_md_remove, | |
| .driver = { | |
| .of_match_table = of_match_ptr(fimc_md_of_match), | |
| .name = "s5p-fimc-md", | |
| } | |
| }; | |
| static int __init fimc_md_init(void) | |
| { | |
| int ret; | |
| request_module("s5p-csis"); | |
| ret = fimc_register_driver(); | |
| if (ret) | |
| return ret; | |
| return platform_driver_register(&fimc_md_driver); | |
| } | |
| static void __exit fimc_md_exit(void) | |
| { | |
| platform_driver_unregister(&fimc_md_driver); | |
| fimc_unregister_driver(); | |
| } | |
| module_init(fimc_md_init); | |
| module_exit(fimc_md_exit); | |
| MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); | |
| MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION("2.0.1"); |