| // SPDX-License-Identifier: ISC | |
| /* Copyright (C) 2019 MediaTek Inc. | |
| * | |
| * Author: Felix Fietkau <nbd@nbd.name> | |
| * Lorenzo Bianconi <lorenzo@kernel.org> | |
| * Sean Wang <sean.wang@mediatek.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/usb.h> | |
| #include "mt7615.h" | |
| #include "mac.h" | |
| #include "mcu.h" | |
| #include "regs.h" | |
| static const struct usb_device_id mt7615_device_table[] = { | |
| { USB_DEVICE_AND_INTERFACE_INFO(0x0e8d, 0x7663, 0xff, 0xff, 0xff) }, | |
| { }, | |
| }; | |
| static void mt7663u_stop(struct ieee80211_hw *hw) | |
| { | |
| struct mt7615_phy *phy = mt7615_hw_phy(hw); | |
| struct mt7615_dev *dev = hw->priv; | |
| clear_bit(MT76_STATE_RUNNING, &dev->mphy.state); | |
| del_timer_sync(&phy->roc_timer); | |
| cancel_work_sync(&phy->roc_work); | |
| cancel_delayed_work_sync(&phy->scan_work); | |
| cancel_delayed_work_sync(&phy->mt76->mac_work); | |
| mt76u_stop_tx(&dev->mt76); | |
| } | |
| static void mt7663u_cleanup(struct mt7615_dev *dev) | |
| { | |
| clear_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); | |
| mt76u_queues_deinit(&dev->mt76); | |
| } | |
| static void mt7663u_init_work(struct work_struct *work) | |
| { | |
| struct mt7615_dev *dev; | |
| dev = container_of(work, struct mt7615_dev, mcu_work); | |
| if (mt7663u_mcu_init(dev)) | |
| return; | |
| mt7615_init_work(dev); | |
| } | |
| static int mt7663u_probe(struct usb_interface *usb_intf, | |
| const struct usb_device_id *id) | |
| { | |
| static const struct mt76_driver_ops drv_ops = { | |
| .txwi_size = MT_USB_TXD_SIZE, | |
| .drv_flags = MT_DRV_RX_DMA_HDR | MT_DRV_HW_MGMT_TXQ, | |
| .tx_prepare_skb = mt7663_usb_sdio_tx_prepare_skb, | |
| .tx_complete_skb = mt7663_usb_sdio_tx_complete_skb, | |
| .tx_status_data = mt7663_usb_sdio_tx_status_data, | |
| .rx_skb = mt7615_queue_rx_skb, | |
| .sta_ps = mt7615_sta_ps, | |
| .sta_add = mt7615_mac_sta_add, | |
| .sta_remove = mt7615_mac_sta_remove, | |
| .update_survey = mt7615_update_channel, | |
| }; | |
| struct usb_device *udev = interface_to_usbdev(usb_intf); | |
| struct ieee80211_ops *ops; | |
| struct mt7615_dev *dev; | |
| struct mt76_dev *mdev; | |
| int ret; | |
| ops = devm_kmemdup(&usb_intf->dev, &mt7615_ops, sizeof(mt7615_ops), | |
| GFP_KERNEL); | |
| if (!ops) | |
| return -ENOMEM; | |
| ops->stop = mt7663u_stop; | |
| mdev = mt76_alloc_device(&usb_intf->dev, sizeof(*dev), ops, &drv_ops); | |
| if (!mdev) | |
| return -ENOMEM; | |
| dev = container_of(mdev, struct mt7615_dev, mt76); | |
| udev = usb_get_dev(udev); | |
| usb_reset_device(udev); | |
| usb_set_intfdata(usb_intf, dev); | |
| INIT_WORK(&dev->mcu_work, mt7663u_init_work); | |
| dev->reg_map = mt7663_usb_sdio_reg_map; | |
| dev->ops = ops; | |
| ret = mt76u_init(mdev, usb_intf, true); | |
| if (ret < 0) | |
| goto error; | |
| mdev->rev = (mt76_rr(dev, MT_HW_CHIPID) << 16) | | |
| (mt76_rr(dev, MT_HW_REV) & 0xff); | |
| dev_dbg(mdev->dev, "ASIC revision: %04x\n", mdev->rev); | |
| if (mt76_poll_msec(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_PWR_ON, | |
| FW_STATE_PWR_ON << 1, 500)) { | |
| dev_dbg(dev->mt76.dev, "Usb device already powered on\n"); | |
| set_bit(MT76_STATE_POWER_OFF, &dev->mphy.state); | |
| goto alloc_queues; | |
| } | |
| ret = mt76u_vendor_request(&dev->mt76, MT_VEND_POWER_ON, | |
| USB_DIR_OUT | USB_TYPE_VENDOR, | |
| 0x0, 0x1, NULL, 0); | |
| if (ret) | |
| goto error; | |
| if (!mt76_poll_msec(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_PWR_ON, | |
| FW_STATE_PWR_ON << 1, 500)) { | |
| dev_err(dev->mt76.dev, "Timeout for power on\n"); | |
| ret = -EIO; | |
| goto error; | |
| } | |
| alloc_queues: | |
| ret = mt76u_alloc_mcu_queue(&dev->mt76); | |
| if (ret) | |
| goto error; | |
| ret = mt76u_alloc_queues(&dev->mt76); | |
| if (ret) | |
| goto error; | |
| ret = mt7663_usb_sdio_register_device(dev); | |
| if (ret) | |
| goto error; | |
| return 0; | |
| error: | |
| mt76u_queues_deinit(&dev->mt76); | |
| usb_set_intfdata(usb_intf, NULL); | |
| usb_put_dev(interface_to_usbdev(usb_intf)); | |
| mt76_free_device(&dev->mt76); | |
| return ret; | |
| } | |
| static void mt7663u_disconnect(struct usb_interface *usb_intf) | |
| { | |
| struct mt7615_dev *dev = usb_get_intfdata(usb_intf); | |
| if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state)) | |
| return; | |
| ieee80211_unregister_hw(dev->mt76.hw); | |
| mt7663u_cleanup(dev); | |
| usb_set_intfdata(usb_intf, NULL); | |
| usb_put_dev(interface_to_usbdev(usb_intf)); | |
| mt76_free_device(&dev->mt76); | |
| } | |
| #ifdef CONFIG_PM | |
| static int mt7663u_suspend(struct usb_interface *intf, pm_message_t state) | |
| { | |
| struct mt7615_dev *dev = usb_get_intfdata(intf); | |
| if (!test_bit(MT76_STATE_SUSPEND, &dev->mphy.state) && | |
| mt7615_firmware_offload(dev)) { | |
| int err; | |
| err = mt76_connac_mcu_set_hif_suspend(&dev->mt76, true); | |
| if (err < 0) | |
| return err; | |
| } | |
| mt76u_stop_rx(&dev->mt76); | |
| mt76u_stop_tx(&dev->mt76); | |
| return 0; | |
| } | |
| static int mt7663u_resume(struct usb_interface *intf) | |
| { | |
| struct mt7615_dev *dev = usb_get_intfdata(intf); | |
| int err; | |
| err = mt76u_vendor_request(&dev->mt76, MT_VEND_FEATURE_SET, | |
| USB_DIR_OUT | USB_TYPE_VENDOR, | |
| 0x5, 0x0, NULL, 0); | |
| if (err) | |
| return err; | |
| err = mt76u_resume_rx(&dev->mt76); | |
| if (err < 0) | |
| return err; | |
| if (!test_bit(MT76_STATE_SUSPEND, &dev->mphy.state) && | |
| mt7615_firmware_offload(dev)) | |
| err = mt76_connac_mcu_set_hif_suspend(&dev->mt76, false); | |
| return err; | |
| } | |
| #endif /* CONFIG_PM */ | |
| MODULE_DEVICE_TABLE(usb, mt7615_device_table); | |
| MODULE_FIRMWARE(MT7663_OFFLOAD_FIRMWARE_N9); | |
| MODULE_FIRMWARE(MT7663_OFFLOAD_ROM_PATCH); | |
| MODULE_FIRMWARE(MT7663_FIRMWARE_N9); | |
| MODULE_FIRMWARE(MT7663_ROM_PATCH); | |
| static struct usb_driver mt7663u_driver = { | |
| .name = KBUILD_MODNAME, | |
| .id_table = mt7615_device_table, | |
| .probe = mt7663u_probe, | |
| .disconnect = mt7663u_disconnect, | |
| #ifdef CONFIG_PM | |
| .suspend = mt7663u_suspend, | |
| .resume = mt7663u_resume, | |
| .reset_resume = mt7663u_resume, | |
| #endif /* CONFIG_PM */ | |
| .soft_unbind = 1, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| module_usb_driver(mt7663u_driver); | |
| MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); | |
| MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>"); | |
| MODULE_LICENSE("Dual BSD/GPL"); |