| // SPDX-License-Identifier: ISC | |
| /* | |
| * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include "../mt76x02_usb.h" | |
| #include "mt76x2u.h" | |
| static const struct usb_device_id mt76x2u_device_table[] = { | |
| { USB_DEVICE(0x0b05, 0x1833) }, /* Asus USB-AC54 */ | |
| { USB_DEVICE(0x0b05, 0x17eb) }, /* Asus USB-AC55 */ | |
| { USB_DEVICE(0x0b05, 0x180b) }, /* Asus USB-N53 B1 */ | |
| { USB_DEVICE(0x0e8d, 0x7612) }, /* Aukey USBAC1200 - Alfa AWUS036ACM */ | |
| { USB_DEVICE(0x057c, 0x8503) }, /* Avm FRITZ!WLAN AC860 */ | |
| { USB_DEVICE(0x7392, 0xb711) }, /* Edimax EW 7722 UAC */ | |
| { USB_DEVICE(0x0e8d, 0x7632) }, /* HC-M7662BU1 */ | |
| { USB_DEVICE(0x2c4e, 0x0103) }, /* Mercury UD13 */ | |
| { USB_DEVICE(0x0846, 0x9053) }, /* Netgear A6210 */ | |
| { USB_DEVICE(0x045e, 0x02e6) }, /* XBox One Wireless Adapter */ | |
| { USB_DEVICE(0x045e, 0x02fe) }, /* XBox One Wireless Adapter */ | |
| { }, | |
| }; | |
| static int mt76x2u_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| static const struct mt76_driver_ops drv_ops = { | |
| .drv_flags = MT_DRV_SW_RX_AIRTIME, | |
| .survey_flags = SURVEY_INFO_TIME_TX, | |
| .update_survey = mt76x02_update_channel, | |
| .tx_prepare_skb = mt76x02u_tx_prepare_skb, | |
| .tx_complete_skb = mt76x02u_tx_complete_skb, | |
| .tx_status_data = mt76x02_tx_status_data, | |
| .rx_skb = mt76x02_queue_rx_skb, | |
| .sta_ps = mt76x02_sta_ps, | |
| .sta_add = mt76x02_sta_add, | |
| .sta_remove = mt76x02_sta_remove, | |
| }; | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct mt76x02_dev *dev; | |
| struct mt76_dev *mdev; | |
| int err; | |
| mdev = mt76_alloc_device(&intf->dev, sizeof(*dev), &mt76x2u_ops, | |
| &drv_ops); | |
| if (!mdev) | |
| return -ENOMEM; | |
| dev = container_of(mdev, struct mt76x02_dev, mt76); | |
| udev = usb_get_dev(udev); | |
| usb_reset_device(udev); | |
| usb_set_intfdata(intf, dev); | |
| mt76x02u_init_mcu(mdev); | |
| err = mt76u_init(mdev, intf, false); | |
| if (err < 0) | |
| goto err; | |
| mdev->rev = mt76_rr(dev, MT_ASIC_VERSION); | |
| dev_info(mdev->dev, "ASIC revision: %08x\n", mdev->rev); | |
| if (!is_mt76x2(dev)) { | |
| err = -ENODEV; | |
| goto err; | |
| } | |
| err = mt76x2u_register_device(dev); | |
| if (err < 0) | |
| goto err; | |
| return 0; | |
| err: | |
| mt76u_queues_deinit(&dev->mt76); | |
| mt76_free_device(&dev->mt76); | |
| usb_set_intfdata(intf, NULL); | |
| usb_put_dev(udev); | |
| return err; | |
| } | |
| static void mt76x2u_disconnect(struct usb_interface *intf) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct mt76x02_dev *dev = usb_get_intfdata(intf); | |
| struct ieee80211_hw *hw = mt76_hw(dev); | |
| set_bit(MT76_REMOVED, &dev->mphy.state); | |
| ieee80211_unregister_hw(hw); | |
| mt76x2u_cleanup(dev); | |
| mt76_free_device(&dev->mt76); | |
| usb_set_intfdata(intf, NULL); | |
| usb_put_dev(udev); | |
| } | |
| static int __maybe_unused mt76x2u_suspend(struct usb_interface *intf, | |
| pm_message_t state) | |
| { | |
| struct mt76x02_dev *dev = usb_get_intfdata(intf); | |
| mt76u_stop_rx(&dev->mt76); | |
| return 0; | |
| } | |
| static int __maybe_unused mt76x2u_resume(struct usb_interface *intf) | |
| { | |
| struct mt76x02_dev *dev = usb_get_intfdata(intf); | |
| int err; | |
| err = mt76u_resume_rx(&dev->mt76); | |
| if (err < 0) | |
| goto err; | |
| err = mt76x2u_init_hardware(dev); | |
| if (err < 0) | |
| goto err; | |
| return 0; | |
| err: | |
| mt76x2u_cleanup(dev); | |
| return err; | |
| } | |
| MODULE_DEVICE_TABLE(usb, mt76x2u_device_table); | |
| MODULE_FIRMWARE(MT7662_FIRMWARE); | |
| MODULE_FIRMWARE(MT7662_ROM_PATCH); | |
| static struct usb_driver mt76x2u_driver = { | |
| .name = KBUILD_MODNAME, | |
| .id_table = mt76x2u_device_table, | |
| .probe = mt76x2u_probe, | |
| .disconnect = mt76x2u_disconnect, | |
| #ifdef CONFIG_PM | |
| .suspend = mt76x2u_suspend, | |
| .resume = mt76x2u_resume, | |
| .reset_resume = mt76x2u_resume, | |
| #endif /* CONFIG_PM */ | |
| .soft_unbind = 1, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| module_usb_driver(mt76x2u_driver); | |
| MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); | |
| MODULE_LICENSE("Dual BSD/GPL"); |