blob: 40f7cd2405914118ec885b1d7e78bacd5d8a6dab [file] [log] [blame]
What: /sys/bus/event_source/devices/hv_gpci/format
Date: September 2020
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: Read-only. Attribute group to describe the magic bits
that go into perf_event_attr.config for a particular pmu.
(See ABI/testing/sysfs-bus-event_source-devices-format).
Each attribute under this group defines a bit range of the
perf_event_attr.config. All supported attributes are listed
below::
counter_info_version = "config:16-23"
length = "config:24-31"
partition_id = "config:32-63"
request = "config:0-31"
sibling_part_id = "config:32-63"
hw_chip_id = "config:32-63"
offset = "config:32-63"
phys_processor_idx = "config:32-63"
secondary_index = "config:0-15"
starting_index = "config:32-63"
For example::
processor_core_utilization_instructions_completed = "request=0x94,
phys_processor_idx=?,counter_info_version=0x8,
length=8,offset=0x18"
In this event, '?' after phys_processor_idx specifies this value
this value will be provided by user while running this event.
What: /sys/bus/event_source/devices/hv_gpci/interface/collect_privileged
Date: February 2014
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
'0' if the hypervisor is configured to forbid access to event
counters being accumulated by other guests and to physical
domain event counters.
'1' if that access is allowed.
What: /sys/bus/event_source/devices/hv_gpci/interface/ga
Date: February 2014
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
0 or 1. Indicates whether we have access to "GA" events (listed
in arch/powerpc/perf/hv-gpci.h).
What: /sys/bus/event_source/devices/hv_gpci/interface/expanded
Date: February 2014
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
0 or 1. Indicates whether we have access to "EXPANDED" events (listed
in arch/powerpc/perf/hv-gpci.h).
What: /sys/bus/event_source/devices/hv_gpci/interface/lab
Date: February 2014
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
0 or 1. Indicates whether we have access to "LAB" events (listed
in arch/powerpc/perf/hv-gpci.h).
What: /sys/bus/event_source/devices/hv_gpci/interface/version
Date: February 2014
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
A number indicating the version of the gpci interface that the
hypervisor reports supporting.
What: /sys/bus/event_source/devices/hv_gpci/interface/kernel_version
Date: February 2014
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
A number indicating the latest version of the gpci interface
that the kernel is aware of.
What: /sys/devices/hv_gpci/cpumask
Date: October 2020
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: read only
This sysfs file exposes the cpumask which is designated to make
HCALLs to retrieve hv-gpci pmu event counter data.
What: /sys/devices/hv_gpci/interface/processor_bus_topology
Date: July 2023
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: admin read only
This sysfs file exposes the system topology information by making HCALL
H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value
PROCESSOR_BUS_TOPOLOGY(0xD0).
* This sysfs file will be created only for power10 and above platforms.
* User needs root privileges to read data from this sysfs file.
* This sysfs file will be created, only when the HCALL returns "H_SUCCESS",
"H_AUTHORITY" or "H_PARAMETER" as the return type.
HCALL with return error type "H_AUTHORITY" can be resolved during
runtime by setting "Enable Performance Information Collection" option.
* The end user reading this sysfs file must decode the content as per
underlying platform/firmware.
Possible error codes while reading this sysfs file:
* "-EPERM" : Partition is not permitted to retrieve performance information,
required to set "Enable Performance Information Collection" option.
* "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address
or because of some hardware error. Refer to getPerfCountInfo documentation for
more information.
* "-EFBIG" : System information exceeds PAGE_SIZE.
What: /sys/devices/hv_gpci/interface/processor_config
Date: July 2023
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: admin read only
This sysfs file exposes the system topology information by making HCALL
H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value
PROCESSOR_CONFIG(0x90).
* This sysfs file will be created only for power10 and above platforms.
* User needs root privileges to read data from this sysfs file.
* This sysfs file will be created, only when the HCALL returns "H_SUCCESS",
"H_AUTHORITY" or "H_PARAMETER" as the return type.
HCALL with return error type "H_AUTHORITY" can be resolved during
runtime by setting "Enable Performance Information Collection" option.
* The end user reading this sysfs file must decode the content as per
underlying platform/firmware.
Possible error codes while reading this sysfs file:
* "-EPERM" : Partition is not permitted to retrieve performance information,
required to set "Enable Performance Information Collection" option.
* "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address
or because of some hardware error. Refer to getPerfCountInfo documentation for
more information.
* "-EFBIG" : System information exceeds PAGE_SIZE.
What: /sys/devices/hv_gpci/interface/affinity_domain_via_virtual_processor
Date: July 2023
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: admin read only
This sysfs file exposes the system topology information by making HCALL
H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value
AFFINITY_DOMAIN_INFORMATION_BY_VIRTUAL_PROCESSOR(0xA0).
* This sysfs file will be created only for power10 and above platforms.
* User needs root privileges to read data from this sysfs file.
* This sysfs file will be created, only when the HCALL returns "H_SUCCESS",
"H_AUTHORITY" or "H_PARAMETER" as the return type.
HCALL with return error type "H_AUTHORITY" can be resolved during
runtime by setting "Enable Performance Information Collection" option.
* The end user reading this sysfs file must decode the content as per
underlying platform/firmware.
Possible error codes while reading this sysfs file:
* "-EPERM" : Partition is not permitted to retrieve performance information,
required to set "Enable Performance Information Collection" option.
* "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address
or because of some hardware error. Refer to getPerfCountInfo documentation for
more information.
* "-EFBIG" : System information exceeds PAGE_SIZE.
What: /sys/devices/hv_gpci/interface/affinity_domain_via_domain
Date: July 2023
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: admin read only
This sysfs file exposes the system topology information by making HCALL
H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value
AFFINITY_DOMAIN_INFORMATION_BY_DOMAIN(0xB0).
* This sysfs file will be created only for power10 and above platforms.
* User needs root privileges to read data from this sysfs file.
* This sysfs file will be created, only when the HCALL returns "H_SUCCESS",
"H_AUTHORITY" or "H_PARAMETER" as the return type.
HCALL with return error type "H_AUTHORITY" can be resolved during
runtime by setting "Enable Performance Information Collection" option.
* The end user reading this sysfs file must decode the content as per
underlying platform/firmware.
Possible error codes while reading this sysfs file:
* "-EPERM" : Partition is not permitted to retrieve performance information,
required to set "Enable Performance Information Collection" option.
* "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address
or because of some hardware error. Refer to getPerfCountInfo documentation for
more information.
* "-EFBIG" : System information exceeds PAGE_SIZE.
What: /sys/devices/hv_gpci/interface/affinity_domain_via_partition
Date: July 2023
Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description: admin read only
This sysfs file exposes the system topology information by making HCALL
H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value
AFFINITY_DOMAIN_INFORMATION_BY_PARTITION(0xB1).
* This sysfs file will be created only for power10 and above platforms.
* User needs root privileges to read data from this sysfs file.
* This sysfs file will be created, only when the HCALL returns "H_SUCCESS",
"H_AUTHORITY" or "H_PARAMETER" as the return type.
HCALL with return error type "H_AUTHORITY" can be resolved during
runtime by setting "Enable Performance Information Collection" option.
* The end user reading this sysfs file must decode the content as per
underlying platform/firmware.
Possible error codes while reading this sysfs file:
* "-EPERM" : Partition is not permitted to retrieve performance information,
required to set "Enable Performance Information Collection" option.
* "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address
or because of some hardware error. Refer to getPerfCountInfo documentation for
more information.
* "-EFBIG" : System information exceeds PAGE_SIZE.