blob: dabb80cdd25a362068062bb0be5a1db5b53c02c1 [file] [log] [blame]
===================
Block IO Controller
===================
Overview
========
cgroup subsys "blkio" implements the block io controller. There seems to be
a need of various kinds of IO control policies (like proportional BW, max BW)
both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
Plan is to use the same cgroup based management interface for blkio controller
and based on user options switch IO policies in the background.
One IO control policy is throttling policy which can be used to
specify upper IO rate limits on devices. This policy is implemented in
generic block layer and can be used on leaf nodes as well as higher
level logical devices like device mapper.
HOWTO
=====
Throttling/Upper Limit policy
-----------------------------
Enable Block IO controller::
CONFIG_BLK_CGROUP=y
Enable throttling in block layer::
CONFIG_BLK_DEV_THROTTLING=y
Mount blkio controller (see cgroups.txt, Why are cgroups needed?)::
mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
Specify a bandwidth rate on particular device for root group. The format
for policy is "<major>:<minor> <bytes_per_second>"::
echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
This will put a limit of 1MB/second on reads happening for root group
on device having major/minor number 8:16.
Run dd to read a file and see if rate is throttled to 1MB/s or not::
# dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
1024+0 records in
1024+0 records out
4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
Limits for writes can be put using blkio.throttle.write_bps_device file.
Hierarchical Cgroups
====================
Throttling implements hierarchy support; however,
throttling's hierarchy support is enabled iff "sane_behavior" is
enabled from cgroup side, which currently is a development option and
not publicly available.
If somebody created a hierarchy like as follows::
root
/ \
test1 test2
|
test3
Throttling with "sane_behavior" will handle the
hierarchy correctly. For throttling, all limits apply
to the whole subtree while all statistics are local to the IOs
directly generated by tasks in that cgroup.
Throttling without "sane_behavior" enabled from cgroup side will
practically treat all groups at same level as if it looks like the
following::
pivot
/ / \ \
root test1 test2 test3
Various user visible config options
===================================
CONFIG_BLK_CGROUP
Block IO controller.
CONFIG_BFQ_CGROUP_DEBUG
Debug help. Right now some additional stats file show up in cgroup
if this option is enabled.
CONFIG_BLK_DEV_THROTTLING
Enable block device throttling support in block layer.
Details of cgroup files
=======================
Proportional weight policy files
--------------------------------
blkio.bfq.weight
Specifies per cgroup weight. This is default weight of the group
on all the devices until and unless overridden by per device rule
(see `blkio.bfq.weight_device` below).
Currently allowed range of weights is from 1 to 1000. For more details,
see Documentation/block/bfq-iosched.rst.
blkio.bfq.weight_device
Specifies per cgroup per device weights, overriding the default group
weight. For more details, see Documentation/block/bfq-iosched.rst.
Following is the format::
# echo dev_maj:dev_minor weight > blkio.bfq.weight_device
Configure weight=300 on /dev/sdb (8:16) in this cgroup::
# echo 8:16 300 > blkio.bfq.weight_device
# cat blkio.bfq.weight_device
dev weight
8:16 300
Configure weight=500 on /dev/sda (8:0) in this cgroup::
# echo 8:0 500 > blkio.bfq.weight_device
# cat blkio.bfq.weight_device
dev weight
8:0 500
8:16 300
Remove specific weight for /dev/sda in this cgroup::
# echo 8:0 0 > blkio.bfq.weight_device
# cat blkio.bfq.weight_device
dev weight
8:16 300
blkio.time
Disk time allocated to cgroup per device in milliseconds. First
two fields specify the major and minor number of the device and
third field specifies the disk time allocated to group in
milliseconds.
blkio.sectors
Number of sectors transferred to/from disk by the group. First
two fields specify the major and minor number of the device and
third field specifies the number of sectors transferred by the
group to/from the device.
blkio.io_service_bytes
Number of bytes transferred to/from the disk by the group. These
are further divided by the type of operation - read or write, sync
or async. First two fields specify the major and minor number of the
device, third field specifies the operation type and the fourth field
specifies the number of bytes.
blkio.io_serviced
Number of IOs (bio) issued to the disk by the group. These
are further divided by the type of operation - read or write, sync
or async. First two fields specify the major and minor number of the
device, third field specifies the operation type and the fourth field
specifies the number of IOs.
blkio.io_service_time
Total amount of time between request dispatch and request completion
for the IOs done by this cgroup. This is in nanoseconds to make it
meaningful for flash devices too. For devices with queue depth of 1,
this time represents the actual service time. When queue_depth > 1,
that is no longer true as requests may be served out of order. This
may cause the service time for a given IO to include the service time
of multiple IOs when served out of order which may result in total
io_service_time > actual time elapsed. This time is further divided by
the type of operation - read or write, sync or async. First two fields
specify the major and minor number of the device, third field
specifies the operation type and the fourth field specifies the
io_service_time in ns.
blkio.io_wait_time
Total amount of time the IOs for this cgroup spent waiting in the
scheduler queues for service. This can be greater than the total time
elapsed since it is cumulative io_wait_time for all IOs. It is not a
measure of total time the cgroup spent waiting but rather a measure of
the wait_time for its individual IOs. For devices with queue_depth > 1
this metric does not include the time spent waiting for service once
the IO is dispatched to the device but till it actually gets serviced
(there might be a time lag here due to re-ordering of requests by the
device). This is in nanoseconds to make it meaningful for flash
devices too. This time is further divided by the type of operation -
read or write, sync or async. First two fields specify the major and
minor number of the device, third field specifies the operation type
and the fourth field specifies the io_wait_time in ns.
blkio.io_merged
Total number of bios/requests merged into requests belonging to this
cgroup. This is further divided by the type of operation - read or
write, sync or async.
blkio.io_queued
Total number of requests queued up at any given instant for this
cgroup. This is further divided by the type of operation - read or
write, sync or async.
blkio.avg_queue_size
Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
The average queue size for this cgroup over the entire time of this
cgroup's existence. Queue size samples are taken each time one of the
queues of this cgroup gets a timeslice.
blkio.group_wait_time
Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
This is the amount of time the cgroup had to wait since it became busy
(i.e., went from 0 to 1 request queued) to get a timeslice for one of
its queues. This is different from the io_wait_time which is the
cumulative total of the amount of time spent by each IO in that cgroup
waiting in the scheduler queue. This is in nanoseconds. If this is
read when the cgroup is in a waiting (for timeslice) state, the stat
will only report the group_wait_time accumulated till the last time it
got a timeslice and will not include the current delta.
blkio.empty_time
Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
This is the amount of time a cgroup spends without any pending
requests when not being served, i.e., it does not include any time
spent idling for one of the queues of the cgroup. This is in
nanoseconds. If this is read when the cgroup is in an empty state,
the stat will only report the empty_time accumulated till the last
time it had a pending request and will not include the current delta.
blkio.idle_time
Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
This is the amount of time spent by the IO scheduler idling for a
given cgroup in anticipation of a better request than the existing ones
from other queues/cgroups. This is in nanoseconds. If this is read
when the cgroup is in an idling state, the stat will only report the
idle_time accumulated till the last idle period and will not include
the current delta.
blkio.dequeue
Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. This
gives the statistics about how many a times a group was dequeued
from service tree of the device. First two fields specify the major
and minor number of the device and third field specifies the number
of times a group was dequeued from a particular device.
blkio.*_recursive
Recursive version of various stats. These files show the
same information as their non-recursive counterparts but
include stats from all the descendant cgroups.
Throttling/Upper limit policy files
-----------------------------------
blkio.throttle.read_bps_device
Specifies upper limit on READ rate from the device. IO rate is
specified in bytes per second. Rules are per device. Following is
the format::
echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
blkio.throttle.write_bps_device
Specifies upper limit on WRITE rate to the device. IO rate is
specified in bytes per second. Rules are per device. Following is
the format::
echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
blkio.throttle.read_iops_device
Specifies upper limit on READ rate from the device. IO rate is
specified in IO per second. Rules are per device. Following is
the format::
echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
blkio.throttle.write_iops_device
Specifies upper limit on WRITE rate to the device. IO rate is
specified in io per second. Rules are per device. Following is
the format::
echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
Note: If both BW and IOPS rules are specified for a device, then IO is
subjected to both the constraints.
blkio.throttle.io_serviced
Number of IOs (bio) issued to the disk by the group. These
are further divided by the type of operation - read or write, sync
or async. First two fields specify the major and minor number of the
device, third field specifies the operation type and the fourth field
specifies the number of IOs.
blkio.throttle.io_service_bytes
Number of bytes transferred to/from the disk by the group. These
are further divided by the type of operation - read or write, sync
or async. First two fields specify the major and minor number of the
device, third field specifies the operation type and the fourth field
specifies the number of bytes.
Common files among various policies
-----------------------------------
blkio.reset_stats
Writing an int to this file will result in resetting all the stats
for that cgroup.