| Kernel driver acbel-fsg032 |
| ========================== |
| |
| Supported chips: |
| |
| * ACBEL FSG032-00xG power supply. |
| |
| Author: Lakshmi Yadlapati <lakshmiy@us.ibm.com> |
| |
| Description |
| ----------- |
| |
| This driver supports ACBEL FSG032-00xG Power Supply. This driver |
| is a client to the core PMBus driver. |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for |
| details. |
| |
| Sysfs entries |
| ------------- |
| |
| The following attributes are supported: |
| |
| ======================= ====================================================== |
| curr1_crit Critical maximum current. |
| curr1_crit_alarm Input current critical alarm. |
| curr1_input Measured output current. |
| curr1_label "iin" |
| curr1_max Maximum input current. |
| curr1_max_alarm Maximum input current high alarm. |
| curr1_rated_max Maximum rated input current. |
| curr2_crit Critical maximum current. |
| curr2_crit_alarm Output current critical alarm. |
| curr2_input Measured output current. |
| curr2_label "iout1" |
| curr2_max Maximum output current. |
| curr2_max_alarm Output current high alarm. |
| curr2_rated_max Maximum rated output current. |
| |
| |
| fan1_alarm Fan 1 warning. |
| fan1_fault Fan 1 fault. |
| fan1_input Fan 1 speed in RPM. |
| fan1_target Set fan speed reference. |
| |
| in1_alarm Input voltage under-voltage alarm. |
| in1_input Measured input voltage. |
| in1_label "vin" |
| in1_rated_max Maximum rated input voltage. |
| in1_rated_min Minimum rated input voltage. |
| in2_crit Critical maximum output voltage. |
| in2_crit_alarm Output voltage critical high alarm. |
| in2_input Measured output voltage. |
| in2_label "vout1" |
| in2_lcrit Critical minimum output voltage. |
| in2_lcrit_alarm Output voltage critical low alarm. |
| in2_rated_max Maximum rated output voltage. |
| in2_rated_min Minimum rated output voltage. |
| |
| power1_alarm Input fault or alarm. |
| power1_input Measured input power. |
| power1_label "pin" |
| power1_max Input power limit. |
| power1_rated_max Maximum rated input power. |
| power2_crit Critical output power limit. |
| power2_crit_alarm Output power crit alarm limit exceeded. |
| power2_input Measured output power. |
| power2_label "pout" |
| power2_max Output power limit. |
| power2_max_alarm Output power high alarm. |
| power2_rated_max Maximum rated output power. |
| |
| temp[1-3]_input Measured temperature. |
| temp[1-2]_max Maximum temperature. |
| temp[1-3]_rated_max Temperature high alarm. |
| ======================= ====================================================== |
